* gcse.c (delete_null_pointer_checks_1): Do not use delelete_list;
call purge_dead_edges after removing.
(delete_null_pointer_checks): Do not handle delete_list.
* cfgbuild.c (inside_basic_block_p, control_flow_insn_p): Break out from ...
(count_basic_blocks): ... here.
(find_basic_blocks, find_bb_boundaries): Cleanup.
* stor-layout.c (fixup_signed_type, fixup_unsigned_type): Avoid
overflow for types greater then 2 * HOST_WIDE_INT.
* reload.c (find_reloads): Update the duplicates after swapingg.
From-SVN: r47551
* reload.c (find_reloads): Mark new USE insns with QImode.
(find_reloads_toplev, find_reloads_address, subst_reg_equivs,
find_reloads_subreg_address): Likewise.
* regrename.c (note_sets, clear_dead_regs): Abort if pseudos are
encountered.
* reload1.c (reload_combine_note_use): Likewise, inside USEs and
CLOBBERs.
(reload): Make sure there are no USEs with mode other than
VOIDmode. At the end, remove those marked with QImode.
From-SVN: r45889
* reload.c (push_reload): Check for subreg_lowpart_p instead of
SUBREG_BYTE being 0 when determining if the inner part of a subreg
can be reloaded.
From-SVN: r45480
* reload.c (find_reloads_toplev): Back out this change:
Wed Jul 26 19:44:05 2000 Hans-Peter Nilsson <hp@axis.com>
* reload.c (find_reloads_toplev): Reload a paradoxical subreg of a
mem if the address is a mode_dependent_address_p.
From-SVN: r45203
* reload1.c (reload): Make all entries in reg_equiv_memory_loc
unshared.
* reload.c (make_memloc): Copy result if it is still
reg_equiv_memory_loc[regno] on return.
(subst_reloads) [ENABLE_CHECKING]: Check that none of
reg_equiv_constant, reg_equiv_memory_loc, reg_equiv_address and
reg_equiv_mem are modified by the substitutions.
From-SVN: r45177
* expr.h: Split out optab- and libfunc-related code to...
* optabs.h, libfuncs.h: ... these new headers.
* Makefile.in (CONFIG_H, EXPR_H): Take out insn-codes.h.
(OPTABS_H): New.
(various .o rules): Add $(OPTABS_H) and/or libfuncs.h to
dependencies.
* mkconfig.sh: Don't include insn-codes.h from config.h.
* reload.h: Use #ifdef GCC_INSN_CODES_H to decide whether
enum insn_code is available. Move reload_in_optab and
reload_out_optab array declarations to optabs.h.
* regmove.c (gen_add3_insn): Move to optabs.c, export from
there, prototype in expr.h.
* gencodes.c: Cleanup: zap global variables, don't use
printf where puts will do, don't bother defining MAX_INSN_CODE
which nothing uses, let CODE_FOR_nothing get its value implicitly.
* genemit.c, genopinit.c: Include optabs.h in generated file.
* genoutput.c: Include insn-codes.h in generated file.
* builtins.c, caller-save.c, combine.c, doloop.c, explow.c,
expmed.c, expr.c, function.c, ifcvt.c, loop.c, optabs.c, profile.c,
reload1.c, simplify-rtx.c, stmt.c, unroll.c, config/alpha/alpha.c,
config/arm/arm.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/i386/i386.c, config/ia64/ia64.c, config/mn10300/mn10300.c,
config/pj/pj.c, config/sh/sh.c, config/sparc/sparc.c:
Include optabs.h.
* builtins.c, calls.c, dwarf2out.c, except.c, expr.c, function.c,
optabs.c, stmt.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/m88k/m88k.c, config/sparc/sparc.c:
Include libfuncs.h.
* reload.c: Include expr.h and optabs.h before reload.h.
* config/alpha/alpha.c: Include tree.h before reload.h.
* config/pa/pa.c: Include expr.h, optabs.h, libfuncs.h,
and reload.h in that order.
* config/sparc/sparc.c: Include debug.h.
* recog.c: Include insn-codes.h.
cp:
* Make-lang.in (cp/except.o): Add libfuncs.h to dependencies.
* except.c: Include libfuncs.h.
java:
* Make-lang.in (java/decl.o): Update dependencies.
* decl.c: Include libfuncs.h, don't include toplev.h.
From-SVN: r44858
2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
* reload.c (subst_reloads): Take INSN argument. When
replacing a LABEL_REF in a JUMP_INSN, add a REG_LABEL note.
* reload.h (subst_reloads): Adjust prototype.
* reload1.c (reload_as_needed): Pass INSN to subst_reloads.
* jump.c (mark_all_labels): Canonicalize any REG_LABEL notes
present in JUMP_INSNs and copy them to JUMP_LABEL.
* flow.c (find_label_refs, find_basic_blocks_1): Skip
JUMP_INSNs and insns with REG_LABELs that are followed by
JUMP_INSNs with the same REG_LABEL.
* sched-rgn.c (is_cfg_nonregular): Likewise.
* rtlanal.c (computed_jump_p): Make it false if a REG_LABEL
note is available.
* unroll.c (unroll_loop): Look for REG_LABEL notes in
JUMP_INSNs too.
* rtl.texi (REG_LABEL): Document usage in JUMP_INSNs.
From-SVN: r38755
* reload.c (update_auto_inc_notes): New, broken out from ...
(find_reloads_address_1): ... use here, also correct possible
use of uninitialised reloadnum.
From-SVN: r38441
* reload.c (find_reloads_address_1): Generate reloads for auto_inc
pseudos that refer to the original pseudos, not only to their
equivalent memory locations.
From-SVN: r36413
* reload.c (push_reload): Use CLASS_CANNOT_CHANGE_MODE_P in addition
to CLASS_CANNOT_CHANGE_MODE.
* config/ia64/ia64.h (CLASS_CANNOT_CHANGE_MODE_P): True only if the
mode classes are different.
From-SVN: r36256
* reload.c (reload_inner_reg_of_subreg): New function broken out of
push_reload.
(push_reload): Use reload_inner_reg_of_subreg.
(combine_reloads): Do not combine reloads if the input reload
is a SUBREG in which the inner part will need reloading.
From-SVN: r35841
* reload.c (push_secondary_reload): Revert last change.
If we use a reload_in/out pattern, make the when the same
as the primary reload.
(find_reloads): Likewise.
From-SVN: r35746
* reload.c (push_secondary_reload): When invoking a reload_{in,out}
pattern, always allocate a tertiary scratch register.
* config/alpha/alpha.md (reload_inqi): Use a DImode scratch.
(reload_inhi): Likewise.
From-SVN: r35626
* Makefile.in (c-decl.o): Depend on rtl.h and expr.h.
* alias.c (struct alias_entry): alias_set is HOST_WIDE_INT.
(REG_BASE_VALUE): Remove unneeded cast to unsigned.
(get_alias_set_entry): ALIAS_SET arg is HOST_WIDE_INT.
(find_base_decl): New function, from c_find_base_decl in c-common.c.
(new_alias_set): Moved from tree.c; return is HOST_WIDE_INT.
(get_alias_set): Likewise.
Major rework to do more things and allow language-specific code
to just handle special-cases.
(record_alias_subset): Args are HOST_WIDE_INT.
(record_component_alias): Local vars are HOST_WIDE_INT.
Don't handle COMPLEX_EXPR.
(get_varargs_alias_set): Moved from builtins.c.
(get_frame_alias_set): New function.
* builtins.c (expand_builtin_return_address): Use frame alias set.
(expand_builtin_setjmp, expand_builtin_longjmp): Use alias set
for setjmp buffer.
(get_memory_rtx): Rework to use set_mem_attributes.
(get_varargs_alias_set): Deleted from here.
* c-common.c (c_apply_type_quals_to_decl): Alias sets now HOST_WIDE_INT.
(c_find_base_decl): Deleted from here.
(c_get_alias_set): Remove many cases and rework to just handle
C-specific cases.
* c-common.h (c_get_alias_set): Returns HOST_WIDE_INT.
* c-decl.c (rtl.h, expr.h): Now included.
(init_decl_processing): Call record_component_aliases on array types.
(grokdeclarator): Likewise.
Set TREE_ADDRESSABLE for all fields that are not bitfields.
* c-typeck.c (common_type): Call record_component_aliases for array.
* caller-save.c (setup_save_areas): Rework register loop for unsigned.
Set all save areas to the frame alias set.
* calls.c (initialie_argument_information): Call set_mem_attributes.
(compute_argument_addresses, expand_call): Likewise.
* explow.c (set_mem_attributes): New function.
(stabilize): Use MEM_COPY_ATTRIBUTES and force_reg.
* expr.c (struct move_by_pieces): Remove {to,from}_{struct,readonly}.
LEN and OFFSET now HOST_WIDE_INT.
(clear_by_pieces): Similar changes.
(move_by_pieces): LEN now HOST_WIDE_INT; don't set deleted fields.
(move_by_pieces_ninsns): Now returns unsigned HOST_WIDE_INT.
(move_by_pieces_1): Don't use deleted fields, use MEM_COPY_ATTRIBUTES.
(clear_by_pieces_1): Likewise.
(emit_push_insn): Call set_mem_attributes.
(expand_expr, case INDIRECT_REF): Likewise.
(expand_expr, case VAR_DECL): Call change_address.
* expr.h (ADD_PARM_SIZE, SUB_PARM_SIZE): Use host_integerp and
tree_low_cst.
(get_varargs_alias_set, get_frame_alias_set): New decls.
(record_base_value, record_alias_subset, lang_get_alias_set): Likewise.
(new_alias_set, set_mem_attributes): Likewse.
* function.c (struct temp_slot): ALIAS_SET is HOST_WIDE_INT.
(assign_stack_temp_for_type): Likewise.
Can split slot even if alias set since can copy.
Set MEM_ALIAS_SET and MEM_SET_IN_STRUCT_P.
(assign_temp): Use host_integerp and tree_low_cst.
(put_var_into_stack): Properly handle SAVE_EXPR.
(put_addressof_into_stack): Likewise.
(assign_parms): Call set_mem_attributes.
Delete #if 0 code.
(fix_lexical_address): Put reference to chain into frame alias set.
(expand_function_start): Call set_mem_attributes.
* integrate.c (expand_inline_function): Likewise.
* recog.c (adj_offsettable_operand): Use MEM_COPY_ATTRIBUTES.
* regmove.c (try_apply_stack_adjustment): Likewise.
* reload.c (push_reload, make_memloc): Likewise.
* reload1.c (alter_reg): Make alias sets for spilled pseudos.
* rtl.def (MEM): Update comment.
* rtl.h (MEM_ALIAS_SET): Now uses XCWINT.
(move_by_pieces): Change length to HOST_WIDE_INT.
(record_base_value, record_alias_subset): Delete from here.
* stmt.c (expand_decl): Call set_mem_attributes.
* stor-layout.c (finish_record_layout): Call record_component_aliases.i
* toplev.c (compile_file): Call init_alias_once earlier.
* tree.c (lang_get_alias_set, get_alias_set, new_alias_set): Deleted
from here: now in alias.c.
* tree.h (struct tree_type): alias_set is HOST_WIDE_INT.
(struct tree_decl): Likewise.
(get_alias_set, new_alias_set, lang_get_alias_set): Deleted from here.
* varasm.c (make_function_rtl, make_decl_rtl): Call set_mem_attributes.
(output_constant_def, force_const_mem): Likewise.
* cp/Makefile.in (decl.o): Include ../expr.h.
* cp/decl.c (expr.h): Include.
(init_decl_processing): Call record_component_aliases for arrays.
(grokdeclarator): Likewise.
Set TREE_ADDRESSABLE for fields that aren't bitfields.
* cp/tree.c (build_cplus_array_type_1): Call record_component_aliases.
From-SVN: r34305
* rtl.h (loc_mentioned_in_p): Declare.
* reload.c (loc_mentioned_in_p): Moved from here...
* rtlanal.c (loc_mentioned_in_p): to here. No longer static.
Fix loop increment for 'E' handling.
* loop.c (strength_reduce): When doing biv->giv conversion,
take multi-insn biv increments into account.
From-SVN: r34150
* alias.c (nonlocal_reference_p): Minor reformatting.
* reload.c (find_equiv_reg): Simplify logic for
CALL_INSN_FUNCTION_USAGE since can't have SUBREG or pseudos and
some some reformatting.
* reload1.c (reload_combine): Don't assume everything in
CALL_INSN_FUNCTION_USAGE is a REG and clean up code a bit.
From-SVN: r33797
modify sizes to be unsigned and use HOST_WIDE_INT.
* alias.c (reg_known_value_size): Now unsigned.
* c-typeck.c (build_unary_op, case ADDR_EXPR): Use byte_position.
(really_start_incremental_init): Use bitsize_zero_node.
(push_init_level, pop_init_level, output_init_element): Likewise.
Use bitsize_unit_node and bitsize_one_node.
(output_pending_init_elements, process_init_element): Likewise.
* combine.c (combine_max_regno, reg_sign_bit_copies): Now unsigned.
(make_extraction): Position and length HOST_WIDE_INT and unsigned
HOST_WIDE_INT, respectively.
(get_pos_from_mask): Passed in value is unsigned HOST_WIDE_INT.
(num_sign_bit_copies): Returns unsigned.
BITWIDTH now unsigned; rework arithmetic.
Remove recursive call from arg to MAX.
(combine_instructions, init_reg_last_arrays): NREGS now unsigned.
(setup_incoming_promotions, can_combine_p, try_combine, simplify_set):
REGNO now unsigned.
(set_nonzero_bit_and_sign_copies): NUM now unsigned.
(find_split_point, expand_compound_operation, make_extraction): LEN
now unsigned HOST_WIDE_INT, POS now HOST_WIDE_INT.
(make_field_assignment): Likewise.
(combine_simplify_rtx): Add cast.
(expand_compound_operation): MODEWIDTH now unsigned; rework arithmetic.
(force_to_mode): WIDTH now unsigned; add cast.
(if_then_else_cond): SIZE now unsigned.
(nonzero_bits): MODE_WIDTH, RESULT_WIDTH, and WIDTH now unsigned.
(extended_count): Now returns unsigned.
(simplify_shift_const): COUNT unsigned; arg is now INPUT_COUNT.
Add SIGNED_COUNT variable; MODE_WORDS and FIRST_COUNT now unsigned.
(simplify_comparison): MODE_WIDTH now unsigned.
(update_table_tick): REGNO and ENDREGNO now unsigned; new var R.
(mark_used_regs_combine): Likewise; rework arithmetic.
(record_value_for_reg): REGNO, ENDREGNO, and I now unsigned.
(record_dead_and_set_regs, reg_dead_at_p, distribute_notes): Likewise.
(record_promoted_value): REGNO now unsigned.
(get_last_value_validate): REGNO, ENDREGNO, and J now unsigned.
(get_last_value): REGNO now unsigned.
(use_crosses_set_p): REGNO and ENDREGNO now unsigned.
(reg_dead_regno, reg_dead_endregno): Now unsigned.
(remove_death): Arg REGNO now unsigned.
(move_deaths): REGNO, DEADREGNO, DEADEND, OUREND, and I now unsigned.
(reg_bitfield_target_p): REGNO, REGNO, ENDREGNO, and ENDTREGNO
now unsigned.
* convert.c (convert_to_integer): INPREC and OUTPREC now unsigned.
* cse.c (struct qty_table_elem): FIRST_REG and LAST_REG now unsigned.
(struct cse_reg_info): REGNO now unsigned.
(cached_regno): Now unsigned.
(REGNO_QTY_VALID_P): Add cast.
(make_new_qty, make_regs_eqv, delete_reg_eqiv): Regno args unsigned.
(remove_invalid_regs): Likewise.
(remove_invalid_subreg_refs): Likewise; arg WORD also unsigned
as are variables END and I.
(get_cse_reg_info, insert): Likewise.
(mention_regs, invalidate_for_call): REGNO, ENDREGNO, and I unsigned.
(canon_hash): Likewise.
(insert_regs, lookup_for_remove): REGNO now unsigned.
(invalidate): REGNO, ENDREGNO, TREGNO, and TENDREGNO now unsigned.
New variable RN.
* dbxout.c (dbxout_parms, dbxout_reg_parms): Don't check for REGNO < 0.
* dwarf2out.c (dwarf2ou_frame_debug_expr): Remove cast.
* emit-rtl.c (subreg_realpart_p): Add cast.
(operand_subword): Arg I is now unsigned as is var PARTWORDS.
(operand_subword_force): Arg I is now unsigned.
* except.c (eh_regs): Variable I is now unsigned.
* explow.c (hard_function_value): BYTES is unsigned HOST_WIDE_INT.
* expmed.c (store_fixed_bit_field): Position is HOST_WIDE_INT;
length is unsigned HOST_WIDE_INT; likewise for internal variables.
(store_split_bit_field, extract_fixed_bit_field): Likewise.
(extract_split_bit_field, store_bit_field, extract_bit_field):
Likewise.
* expr.c (store_constructor_fields, store_constructor, store_field):
Positions are HOST_WIDE_INT and lengths are unsigned HOST_WIDE_INT.
(expand_assignment, expand_expr, expand_expr_unaligned): Likewise.
(do_jump): Likewise.
(move_by_pieces, move_by_pieces_ninsns, clear_by_pieces):
MAX_SIZE is now unsigned.
(emit_group_load): BYTEPOS is HOST_WIDE_INT; BYTELEN is unsigned.
(emit_group_store): Likewise.
(emit_move_insn): I now unsigned.
(store_constructor): Use host_integerp, tree_low_cst, and
bitsize_unit_node.
(get_inner_reference): Return bitpos and bitsize as HOST_WIDE_INT.
Rework all calculations to use trees and new fields.
* expr.h (promoted_input_arg): Regno now unsigned.
(store_bit_field, extract_bit_field): Adjust types of pos and size.
(mark_seen_cases): Arg is HOST_WIDE_INT.
* flow.c (verify_wide_reg_1): REGNO now unsigned.
* fold-const.c (decode_field_reference): Size and pos HOST_WIDE_INT;
precisions and alignments are unsigned.
(optimize_bit_field_compare, fold_truthop): Likewise.
(int_const_binop): Adjust threshold for size_int_type_wide call.
(fold_convert): Likewise.
(size_int_type_wide): Make table larger and fix thinko that only
had half of table used.
(all_ones_mask_p, fold): Precisions are unsigned.
* function.c (put_reg_info_stack): REGNO is unsigned.
(instantiate_decl): Size is HOST_WIDE_INT.
(instantiate_virtual_regs): I is unsigned.
(assign_parms): REGNO, REGNOI, and REGNOR are unsigned.
(promoted_input_arg): REGNO is unsigned.
* function.h (struct function): x_max_parm_reg is now unsigned.
* gcse.c (max_gcse_regno): Now unsigned.
(struct null_pointer_info): min_reg and max_reg now unsigned.
(lookup_set, next_set): REGNO arg now unsigned.
(compute_hash_table): REGNO and I now unsigned.
(handle_avail_expr): regnum_for_replacing now unsigned.
(cprop_insn): REGNO now unsigned.
(delete_null_pointer_checks_1): BLOCK_REG now pointer to unsigned.
* ggc-common.c (ggc_mark_tree_children, case FIELD_DECL): New case.
* global.c (set_preference): SRC_REGNO, DEST_REGNO, and I now unsigned.
* hard-reg-set.h (reg_class_size): Now unsigned.
* integrate.c (mark_stores): LAST_REG and I now unsigned; new UREGNO.
* jump.c (mark_modified_reg): I now unsigned; add cast.
(rtx_equal_for_thread_p): Add cast.
* loop.c (max_reg_before_loop): Now unsigned.
(struct_movable): REGNO now unsigned.
(try_copy_prop): REGNO arg unsigned.
(regs_match_p): XN and YN now unsigned.
(consec_sets_invariant_p, maybe_eliminate_biv): REGNO now unsigned.
(strength_reduce): Likewise; NREGS also unsigned.
(first_increment_giv, last_increment_giv unsigned): Now unsigned.
* loop.h (struct iv_class): REGNO now unsigned.
(max_reg_before_loop, first_increment_giv, last_increment_giv):
Now unsigned.
* machmode.h (mode_size, mode_unit_size): Now unsigned.
(mode_for_size, smallest_mode_for_size): Pass size as unsigned.
* optabs.c (expand_binop): I and NWORDS now unsigned.
(expand_unop): I now unsigned.
* print-tree.c (print_node): Don't print DECL_FIELD_BITPOS, but do
print DECL_FIELD_OFFSET and DECL_FIELD_BIT_OFFSET.
* real.c (significand_size): Now returns unsigned.
* real.h (significand_size): Likewise.
* regclass.c (reg_class_size): Now unsigned.
(choose_hard_reg_mode): Both operands now unsigned.
(record_reg_classes): REGNO and NR now unsigned.
(reg_scan): NREGS now unsigned.
(reg_scan_update): old_max_regno now unsigned.
(reg_scan_mark_refs): Arg MIN_REGNO and var REGNO now unsigned.
* reload.c (find_valid_class): BEST_SIZE now unsigned.
(find_dummy_reload): REGNO, NWORDS, and I now unsigned.
(hard_reg_set_here_p): Args BEG_REGNO and END_REGNO now unsigned.
Likewise for variable R.
(refers_to_regno_for_reload_p): Args REGNO and END_REGNO now unsigned,
as are variables INNER_REGNO and INNER_ENDREGNO; add new variable R.
(find_equiv_reg): Add casts.
(regno_clobbered_p): Arg REGNO now unsigned.
* reload.h (struct reload): NREGS now unsigned.
(refers_to_regno_for_reload_p): Regno args are unsigned.
(regno_clobbered_p): Likewise.
* reload1.c (reg_max_ref_width, spill_stack_slot_width): Now unsigned.
(compute_use_by_pseudos): REGNO now unsigned.
(find_reg): I and J now unsigned, new variable K, and change loop
variables accordingly; THIS_NREGS now unsigned.
(alter_reg): INHERENT_SIZE and TOTAL_SIZE now unsigned.
(spill_hard_reg): REGNO arg now unsigned; add casts.
(forget_old_reloads_1): REGNO, NR, and I now unsigned.
(mark_reload_reg_in_use): Arg REGNO and vars NREGS and I now unsigned.
(clear_reload_reg_in_use): Arg REGNO and vars NREGS, START_REGNO,
END_REGNO, CONFLICT_START, and CONFLICT_END now unsigned.
(reload_reg_free_p, reload_reg_reaches_end_p): Arg REGNO now unsigned.
(choose_reload_regs): MAX_GROUP_SIZE now unsigned.
(emit_reload_insns): REGNO now unsigned.
(reload_cse_move2add): Add cast.
(move2add_note_store): REGNO and I now unsigned; new variable ENDREGNO
and rework loop.
* resource.c (mark_referenced_resources, mark_set_resources): New
variable R; REGNO and LAST_REGNO now unsigned.
(mark_target_live_regs): J and REGNO now unsigned.
* rtl.c (mode_size, mode_unit_size): Now unsigned.
* rtl.h (union rtunion_def): New field rtuint.
(XCUINT): New macro.
(ADDRESSOF_REGNO, REGNO, SUBREG_WORD): New XCUINT.
(operand_subword, operand_subword_force): Word number is unsigned.
(choose_hard_reg_mode): Operands are unsigned.
(refers_to-regno_p, dead_or_set_regno_p): Regno arg is unsigned.
(find_regno_note, find_regno_fusage, replace_regs): Likewise.
(regno_use_in, combine_instructions, remove_death): Likewise.
(reg_scan, reg_scan_update): Likewise.
(extended_count): Return is unsigned.
* rtlanal.c (refers_to_regno_p): Args REGNO and ENDREGNO and vars I,
INNER_REGNO, and INNER_ENDREGNO now unsigned; new variable X_REGNO.
(reg_overlap_mentioned_p): REGNO and ENDREGNO now unsigned.
(reg_set_last_first_regno, reg_set_last_last_regno): Now unsigned.
(reg_reg_last_1): FIRS and LAST now unsigned.
(dead_or_set_p): REGNO, LAST_REGNO, and I now unsigned.
(dead_or_set_regno_p): Arg TEST_REGNO and vars REGNO and ENDREGNO
now unsigned.
(find_regno_note, regno_use_in): Arg REGNO now unsigned.
(find_regno_fusage): Likewise; also var REGNOTE now unsigned.
(find_reg_fusage): Variables REGNO, END_REGNO, and I now unsigned.
(replace_regs): Arg NREGS now unsigned.
* sdbout.c (sdbout_parms, sdbout_reg_parms): Don't check REGNO < 0.
* simplify-rtx.c (simplify_unary_operation): WIDTH now unsigned.
(simplify_binary_operation): Likewise.
(cselib_invalidate_regno): Arg REGNO and variables ENDREGNO, I, and
THIS_LAST now unsigned.
(cselib_record_set): Add cast.
* ssa.c (ssa_max_reg_num): Now unsigned.
(rename_block): REGNO now unsigned.
* stmt.c (expand_return): Bit positions unsigned HOST_WIDE_INT;
sizes now unsigned.
(all_cases_count): Just return -1 not -2.
COUNT, MINVAL, and LASTVAL now HOST_WIDE_INT.
Rework tests to use trees whenever possible.
Use host_integerp and tree_low_cst.
(mark_seen_cases): COUNT arg now HOST_WIDE_INT;
Likewise variable NEXT_NODE_OFFSET; XLO now unsigned.
(check_for_full_enumeration_handing): BYTES_NEEDED, I to HOST_WIDE_INT.
* stor-layout.c (mode_for_size): SIZE arg now unsigned.
(smallest_mode_for_size): Likewise.
(layout_decl): Simplify handing of a specified DECL_SIZE_UNIT.
KNOWN_ALIGN is now an alignment, so simplify code.
Don't turn off DECL_BIT_FIELD if field is BLKmode, but not type.
(start_record_layout): Renamed from new_record_layout_info.
Update to new fields.
(debug_rli, normalize_rli, rli_size_unit_so_far, rli_size_so_far):
New functions.
(place_union_field): Renamed from layout_union_field.
Update to use new fields in rli.
(place_field): Renamed from layout_field.
Major rewrite to use new fields in rli; pass alignment to layout_decl.
(finalize_record_size): Rework to use new fields in rli and handle
union.
(compute_record_mode): Rework to simplify and to use new DECL fields.
(finalize_type_size): Make rounding more consistent.
(finish_union_layout): Deleted.
(layout_type, case VOID_TYPE): Don't set TYPE_SIZE_UNIT either.
(layout_type, case RECORD_TYPE): Call new function names.
(initialize_sizetypes): Set TYPE_IS_SIZETYPE.
(set_sizetype): Set TYPE_IS_SIZETYPE earlier.
(get_best_mode): UNIT is now unsigned; remove casts.
* tree.c (bit_position): Compute from new fields.
(byte_position, int_byte_position): New functions.
(print_type_hash_statistics): Cast to remove warning.
(build_range_type): Use host_integerp and tree_low_cst to try to hash.
(build_index_type): Likewise; make subtype of sizetype.
(build_index_2_type): Pass sizetype to build_range_type.
(build_common_tree_nodes): Use size_int and bitsize_int to
initialize nodes; add bitsize_{zero,one,unit}_node.
* tree.h (DECL_FIELD_CONTEXT): Use FIELD_DECL_CHECK.
(DECL_BIT_FIELD_TYPE, DECL_QUALIFIER, DECL_FCONTEXT): Likewise.
(DECL_PACKED, DECL_BIT_FIELD): Likewise.
(DECL_FIELD_BITPOS): Deleted.
(DECL_FIELD_OFFSET, DECL_FIELD_BIT_OFFSET): New fields.
(DECL_RESULT, DECL_SAVED_INSNS): Use FUNCTION_DECL_CHECK.
(DECL_FRAME_SIZE, DECL_FUNCTION_CODE, DECL_NO_STATIC_CHAIN): Likewise.
(DECL_INLINE, DECL_BUILT_IN_NONANSI, DECL_IS_MALLOC): Likewise.
(DECL_BUILT_IN_CLASS, DECL_STATIC_CONSTRUCTOR): Likewise.
(DECL_STATIC_DESTRUCTOR, DECL_NO_CHECK_MEMORY_USAGE): Likewise.
(DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT, DECL_NO_LIMIT_STACK) Likewise.
(DECL_ORIGINAL_TYPE, TYPE_DECL_SUPPRESS_DEBUG): Use TYPE_DECL_CHECK.
(DECL_ARG_TYPE_AS_WRITEN, DECL_ARG_TYPE): Use PARM_DECL_CHECK.
(DECL_INCOMING_RTL, DECL_TRANSPARENT_UNION): Likewise.
(DECL_ALIGN): Adjust to new field in union.
(DECL_OFFSET_ALIGN): New field.
(DECL_ERROR_ISSUED, DECL_TOO_LATE): Use LABEL_DECL_CHECK.
(DECL_IN_TEXT_SECTION): Use VAR_DECL_CHECK.
(union tree_decl): Add struct for both aligns.
(enum tree_index): Add TI_BITSIZE_{ZERO,ONE,UNIT}.
(bitsize_zero_node, bitsize_one_node, bitsize_unit_node): Added.
(struct record_layout_info): Rework fields to have offset
alignment and byte and bit position.
(start_record_layout, place_field): Renamed from old names.
(rli_size_so_far, rli_size_unit_so_far, normalize_rli): New decls.
(byte_position, int_byte_position): Likewise.
(get_inner_reference): Change types of position and length.
* unroll.c (unroll_loop): New variable R; use for some loops.
MAX_LOCAL_REGNUM and MAXREGNUM now unsigned.
(calculate_giv_inc): Arg REGNO now unsigned.
(copy_loop_body): REGNO and SRC_REGNO now unsigned.
* varasm.c (assemble_variable): Clean up handling of size using
host_integerp and tree_low_cst.
(decode_addr_const): Use byte, not bit, position.
(output_constructor): bitpos and offsets are HOST_WIDE_INT;
use tree_low_cst and int_bit_position.
* objc/objc-act.c (build_ivar_list_initializer): Use byte_position.
* ch/actions.c (check_missing_cases): BYTES_NEEDED is HOST_WIDE_INT.
* ch/typeck.c (expand_constant_to_buffer): Use int_byte_position.
(extract_constant_from_buffer): Likewise.
* cp/class.c (build_vbase_pointer_fields): layout_field now
place_field.
(get_vfield_offset): Use byte_position.
(set_rtti_entry): Set OFFSET to ssizetype zero.
(get_binfo_offset_as_int): Deleted.
(dfs_record_base_offsets): Use tree_low_cst.
(dfs_search_base_offsets): Likewise.
(layout_nonempty_base_or_field): Reflect changes in RLI format
and call byte_position.
(layout_empty_base): Convert offset to ssizetype.
(build_base_field): use rli_size_unit_so_far.
(dfs_propagate_binfo_offsets): Do computation in proper type.
(layout_virtual_bases): Pass ssizetype to propagate_binfo_offsets.
(layout_class_type): Reflect changes in RLI names and fields.
(finish_struct_1): Set DECL_FIELD_OFFSET.
* cp/dump.c (dequeue_and_dump): Call bit_position.
* cp/expr.c (cplus_expand_constant): Use byte_position.
* cp/rtti.c (expand_class_desc): Use bitsize_one_node.
* cp/typeck.c (build_component_addr): Use byte_position and don't
special case for zero offset.
* f/com.c (ffecom_tree_canonize_ptr_): Use bitsize_zero_node.
(ffecom_tree_canonize_ref_): Likewise.
* java/class.c (make_field_value): Use byte_position.
* java/expr.c (JAVA_ARRAY_LENGTH_OFFSET): Use byte_position.
(java_array_data_offset): Likewise.
* java/java-tree.h (MAYBE_CREATE_TYPE_TYPE_LANG_SPECIFIC): Add case to
bzero call.
From-SVN: r32742
* bitmap.c (bitmap_operation): Avoid using -1 for index since unsigned.
* cppinit.c (new_pending_define): Add cast to avoid warning.
* expmed.c (extract_bit_field): Likewise.
* flow.c (enum reorder_skip_type): New type.
(skip_insns_between_blcok): New it.
Rework to avoid warning about possibly undefined variable.
* function.c (assign_parms): Make thisparm_boundary unsigned.
* genrecog.c (write_switch): Cast XWINT result to int.
* lcm.c: Many static fcns and vars now #ifdef OPTIMIZE_MODE_SWITCHING.
* mips-tfile.c (init_file): Make two versions of FDR intializer:
one for MIPS and one for Alpha.
(get_tag, copy_object): Add casts to avoid warnings.
* optabs.c (init_one_libfunc): Cast NAME to (char *).
* reload.c (find_reloads): Make TYPE enum reload_type.
* sbitmap.c (dump_sbitmap): J is unsigned; don't use "1L".
* unroll.c (unroll_loop): Initialize UNROLL_NUMBER.
* varasm.c (compare_constant_1): Add cast to avoid warning.
* config/alpha/alpha.c (alpha_emit_xfloating_libcall): Cast FUNC
to (char *).
(alpha_expand_unaligned_load, alpha_expand_unaligned_store):
Cast switch operand of size to int.
(alpha_expand_epilogue): Always initialize fp_offset and sa_reg.
* config/alpha/alpha.h (INITIAL_ELIMINATION_OFFSET): Add abort
in unhandled case.
From-SVN: r32060
* alias.c: Minor reformatting.
* flow.c: Likewise.
* regs.h: Likewise.
* stor-layout.c: Likewise.
* fold-const.c: Likewise.
(OVERFLOW_SUM_SIGN): Renamed from overflow_sum_sign.
(struct cb_args, const_binop_1, const_binop): Pass type of arg,
not arg itself.
(size_int_wide): Cache nodes even if garbage collecting.
(twoval_comparison_p): Reenable SAVE_EXPR case if operand
of SAVE_EXPR has no side effects.
* cse.c: Move a comment.
* tree.c: Minor reformatting.
(int_size_in_bytes): Return -1 if constant overflows.
* reload.c (combine_reloads): Do nothing if no output reload
From-SVN: r31017
Fri Oct 29 15:25:07 1999 Arnaud Charlet <charlet@ACT-Europe.FR>
* gcov.c (DIR_SEPARATOR): Provide default.
(output_data): Add test for MS-DOS format absolute filename.
(fancy_abort): Correct program name.
(open_files): Open all files in binary mode.
* libgcc2.c (__bb_exit_func): Likewise.
* profile.c (init_branch_prob): Specify binary when opening files.
* flags.h (flag_unwind_tables): New decl.
* toplev.c (flag_unwind_table): New definition.
(f_options): Add -funwind-tables.
(decode_g_option): Clarify warning when unknown -g option is given.
(rest_of_compilation): If inside an inlined external function,
pretend we are just being declared.
* dwarf2out.c (dwarf2out_do_frame): Check -funwind_tables.
(dwarf2out_frame_finish): Likewise.
Fri Oct 29 06:32:44 1999 Geoffrey Keating <geoffk@cygnus.com>
* flow.c (propagate_block): When the last reference to a label
before an ADDR_VEC is deleted because the reference is a dead
store, delete the ADDR_VEC.
Fri Oct 29 07:44:26 1999 Vasco Pedro <vp@di.fct.unl.pt>
* fold-const.c (merge_ranges): In not in0, but in1, handle
upper bounds equal like subset case.
Thu Oct 28 19:22:24 1999 Douglas Rupp <rupp@gnat.com>
* dbxout.c (dbxout_parms): Generate a second stabs line for parameters
passed in a register but moved to the stack.
Thu Oct 28 19:12:57 1999 Sam Tardieu <tardieu@act-europe.fr>
* gcc.c (pass_exit_codes, greatest_status): New variables.
(struct option_map): Add entry for "--pass-exit-codes".
(execute): Update greatest_status if error.
(display_help): Add documentation for -pass-exit-codes.
(process_command): Handle -pass-exit-codes.
(main): Look at pass_exit_codes and greatest_status on call to exit.
Thu Oct 28 18:06:50 1999 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* reload.c (find_reloads): Refine test for no input reload
case to not includes reloads emitted after insn.
* function.c (find_temp_slots_from_address): Handle sum involving
a register that points to a temp slot.
(update_temp_slot_address): Make recursive call if both old and
new are PLUS with a common operand.
* calls.c (expand_call): Mark temp slot for result as having
address taken.
* rtlanal.c (reg_referenced_p, case IF_THEN_ELSE): New case.
* gcc.c (process_command): Add standard_exec_prefix with "GCC"
component as well as "BINUTILS".
* integrate.h (copy_rtx_and_substitute): New arg, FOR_LHS.
* integrate.c (copy_rtx_and_substitute): Likewise.
(expand_inline_function, integrate_parm_decls, integrate_decl_tree):
All callers changed.
* unroll.c (inital_reg_note_copy, copy_loop_body): Likewise.
* dbxout.c (dbxout_type, case INTEGER_TYPE_NODE): If can use
gdb extensions, write size of type; also be more consistent
in using references when this is a subtype.
* pa.md (extv, extzv, insv): Use define_expand to reject constant
that is out of range.
* loop.c (unknown_constant_address_altered): New variable.
(prescan_loop): Initialize it.
(note_addr_stored): Set it for RTX_UNCHANGING_P MEM.
(invariant_p, case MEM): Remove handling for volatile and readony;
check new variable if readonly.
(check_dbra_loop): Chdeck unknown_constant_address_altered.
* cse.c (canon_hash, case MEM): Do not record if BLKmode.
(addr_affects_sp_p): Removed from note_mem_written and only
define #ifdef AUTO_INC_DEC.
* alpha.c (input_operand, case ADDRESSOF): Treat as REG.
* regclass.c (record_reg_classes): Properly handle register move
directions.
* varasm.c (initializer_constant_valid_p, case MINUS_EXPR):
Don't think valid if both operands are invalid.
(struct constant_descriptor): New field RTL.
(mark_const_hash_entry): Mark it.
(record_constant{,_rtx}): Initialize it.
(output_constant_def): Allocate RTL in permanent obstack and
save in table.
({record,compare}_constant_1): Modes must match for
CONSTRUCTOR of ARRAY_TYPE.
* c-common.h (initializer_constant_valid_p): Delete decl from here.
* output.h (initializer_constant_valid_p): Move decl to here.
* c-common.c (initializer_constant_valid_p): Delete function from here.
* varasm.c (initializer_constant_valid_p): Move function to here.
* tree.h (STRIP_SIGN_NOPS): New macro.
* fold-const.c (optimize_minmax_comparison): New function.
(invert_truthvalue, case WITH_RECORD_EXPR): New case.
(fold): Use STRIP_SIGN_NOPS instead of STRIP_TYPE_NOPS.
(fold, case EQ_EXPR): Call optimize_minmax_comparison and add
cases with ABS_EXPR, NEGATE_EXPR, PLUS_EXPR, MINUS_EXPR, and
widening conversions.
(fold, case LE_EXPR): Rework changing unsigned to signed comparisons
to look at size of mode, not precision of type; also add missing cases.
(optimize_bit_field_compare, decode_field_reference): Don't try to
optimize COMPONENT_REF of a PLACEHOLDER_EXPR.
* dwarf2out.c (ctype.h): Include.
(dwarf2out_set_demangle_name_func): New function.
(size_of_line_info): Deleted.
(output_line_info): Compute size of line info table from difference
of labels.
(base_type_die, add_name_attribute): Call demangle function, if any.
(field_byte_offset): Use bits per word for variable length fields.
(gen_array_type_die): Add array name.
(gen_subprogram_die): Ignore DECL_INLINE if -fno-inline.
(dwarf2out_add_library_unit_info): New function.
* explow.c (set_stack_check_libfunc): New function.
(stack_check_libfunc): New static variable.
(probe_stack_range): Allow front-end to set up a libfunc to call.
* combine.c (simplify_comparison): When making comparison in wider
mode, check for having commuted an AND and a SUBREG.
(contains_muldiv): New function.
(try_combine): Call it when dividing a PARALLEL.
(simplify_rtx, case TRUNCATE): Don't remove for umulsi3_highpart.
(simplify_comparison, case ASHIFTRT): Recognize sign-extension of
a PLUS.
(record_value_for_reg): If TEM is a binary operation with two CLOBBERs,
use one of the CLOBBERs instead.
(if_then_else_cond): If comparing against zero, just return thing
being compared.
* optabs.c (expand_abs): If machine has MAX, ABS (x) is MAX (x, -x).
Don't generate shifts and subtract if have conditional arithmetic.
* rtl.h (delete_barrier): New declaration.
* jump.c (jump_optimize): Set up to handle conditional call.
In conditional arithmetic case, handle CALL_INSN followed by a BARRIER.
(delete_barrier): New function.
* rtl.c (read_rtx): Call fatal if bad RTL code; check for bad mode.
* recog.c (nonmemory_operand): Accept ADDRESSOF.
* tree.c (build_type_attribute_variant): Push to obstack of
ttype around type_hash_canon call.
* expr.c (placeholder_list): Move decl to file scope.
(expand_expr): Don't force access to volatile just because its
address is taken.
If ignoring reference operations, just expand the operands.
(expand_expr, case COMPONENT_REF): Propagate
EXPAND_CONST_ADDRESS to recursive call when expanding inner.
Refine test for using bitfield operations vs pointer punning.
(expand_expr, case CONVERT_EXPR): If converting to
BLKmode UNION_TYPE from BLKmode, just return inner object.
Use proper mode in store_field call.
Properly set sizes of object to store and total size in store_field
call for convert to union.
(expand_expr, case ARRAY_REF): If OP0 is in a register, put it in
memory (like for ADDR_EXPR). Also, don't put constant in register if
we'll want it in memory.
(readonly_fields_p): New function.
(expand_expr, case INDIRECT_REF): Call it if LHS.
(expand_assignment): Handle a RESULT_DECL where
DECL_RTL is a PARALLEL.
(do_jump, case WITH_RECORD_EXPR): New case.
(get_inner_reference): Always go inside a CONVERT_EXPR
and NOP_EXPR if both modes are the same.
(store_field): Use bitfield operations if size of bitsize is not same
as size of RHS's type.
Check for bitpos not a multiple of alignment in BLKmode case.
Do block move in largest possible alignment.
(store_constructor): Set BITSIZE to -1 for variable size and properly
in case of array of BLKmode.
(expand_expr_unaligned): New function.
(do_compare_and_jump): Call it.
* mips/iris5.h (SWITCHES_NEED_SPACES): New macro.
* collect2.c (main): Only allow -ofoo if SWITCHES_NEED_SPACES
does not include 'o'.
* function.c (instantiate_virtual_regs_1, case SET): Handle case where
both SET_DEST and SET_SRC reference a virtual register.
(gen_mem_addressof): Copy RTX_UNCHANGING_P from new REG to old REG.
* integrate.c (expand_inline_function): Handle case of setting
virtual stack vars register (from built in setjmp); when parameter
lives in memory, expand virtual_{stack_vars,incoming_args}_rtx early.
(subst_constant): Add new parm, MEMONLY.
(expand_inline_function, integrate_parm_decls): Pass new parm.
(integrate_decl_tree): Likewise.
(copy_rtx_and_substitute, case MEM): Do copy RTX_UNCHANGING_P.
(try_constants): Call subst_constants twice, with MEMONLY 0 and 1.
(copy_rtx_and_substitute, case SET): Add explicit calls to
copy_rtx_and_substitute for both sides.
* stmt.c (expand_asm_operands): Don't use TREE_STRING_LENGTH for
constraints.
(pushcase{,_range}): Convert to NOMINAL_TYPE after checking for
within INDEX_TYPE, instead of before.
(fixup_gotos): Use f->target_rtl, not the next insn,
since latter may be from a later fixup.
(expand_value_return): Correctly convert VAL when promoting function
return; support RETURN_REG being a PARALLEL.
(expand_return): When checking for result in regs and having
cleanup, consider PARALLEL in DECL_RTL as being in regs.
From-SVN: r30299
* reload.h (earlyclobber_operand_p): Declare.
* reload.c (earlyclobber_operand_p): Don't declare. No longer static.
* reload1.c (reload_reg_free_for_value_p): RELOAD_OTHER reloads with
an earlyclobbered output conflict with RELOAD_INPUT reloads - handle
case where the RELOAD_OTHER reload is new. Use earlyclobber_operand_p.
From-SVN: r30202
1999-08-31 12:20 -0700 Zack Weinberg <zack@bitmover.com>
* rtl.h (RTL_CHECK1, RTL_CHECK2): New macros which type- and
bounds- check RTL accesses if --enable-checking.
(RTVEC_ELT): Bounds check if --enable-checking.
(XWINT, XINT, XSTR, XEXP, XVEC, XMODE, XBITMAP, XTREE,
XBBDEF): Use RTL_CHECK1/RTL_CHECK2 as appropriate.
(XVECEXP, XVECLEN): Define in terms of XVEC, RTVEC_ELT, and
GET_NUM_ELEM.
(X0WINT, X0INT, X0STR, X0EXP, X0VEC, X0MODE, X0BITMAP, X0TREE,
X0BBDEF, X0ADVFLAGS): New macros for accessing '0' slots of RTXes.
(ADDR_DIFF_VEC_FLAGS): Use X0ADVFLAGS.
(NOTE_SOURCE_FILE): Use X0STR.
(NOTE_BLOCK_NUMBER, NOTE_EH_HANDLER, LABEL_NUSES,
MEM_ALIAS_SET): Use X0INT.
(NOTE_RANGE_INFO, NOTE_LIVE_INFO, NOTE_BASIC_BLOCK,
JUMP_LABEL, LABEL_REFS, LABEL_NEXTREF, CONTAINING_INSN):
Use X0EXP.
* real.h (CONST_DOUBLE_CHAIN): Use X0EXP.
* rtl.c (copy_rtx, copy_most_rtx): Copy '0' slots with X0WINT.
(rtl_check_failed_bounds, rtl_check_failed_type1,
rtl_check_failed_type2, rtvec_check_failed_bounds): New
functions.
(fancy_abort): Fix comment.
* cse.c (canon_hash): Read CONST_DOUBLE data slots with XWINT.
(cse_insn): Decrement LABEL_NUSES for jump target before
deleting jump insn.
* emit-rtl.c (gen_rtx_CONST_DOUBLE): Use X0EXP for slot 1.
* final.c (alter_subreg): Compute regno before changing x to
REG; set REGNO(x) after changing it.
* flow.c (count_basic_blocks): Use XWINT to inspect EH_REGION
notes containing CONST_INTs.
(delete_eh_regions): Use NOTE_EH_HANDLER.
* function.c (put_reg_into_stack): Make reg a MEM before
initializing it.
(fixup_var_refs_insns): Save REG_NOTES (insn) in case we
delete insn.
(gen_mem_addressof): Make reg a MEM before initializing it.
* integrate.c (copy_rtx_and_substitute): Copy '0' slots with
X0WINT.
* local-alloc.c (update_equiv_regs): Zap REG_NOTES before
deleting an insn, not after.
(block_alloc): Only look at PATTERN(insn) if we have to, and
only if it's format class 'i'.
* loop.c (check_dbra_loop): Check bl->biv->add_val is a
CONST_INT before using its INTVAL.
* print-rtl.c (print_rtx): Use X0STR.
* regmove.c (fixup_match_1): Don't look at PATTERN of
non-class-'i' insn chain elements.
* reload.c (loc_mentioned_in_p): Take address of
in->fld[1].rtx directly.
* reload1.c (reload): Change reg to a MEM before initializing
it.
* varasm.c (mark_constant_pool): Skip CONST_DOUBLES, which
have no names.
* config/i386/i386.md (decrement_and_branch_if_zero): Fix typo.
From-SVN: r29008
* calls.c (emit_call_1): Mark parameter `stack_size' with
ATTRIBUTE_UNUSED.
(expand_call): Initialize variable `insn'.
(emit_library_call): Likewise for variable `high_to_save'.
(emit_library_call_value): Likewise.
(store_one_arg): Likewise for variables `lower_bound' and
`upper_bound'.
* combine.c (try_combine): Likewise for variables `i2_code_number'
and `other_code_number'.
(find_split_point): Likewise for variables `pos', `unsignedp' and
`inner'.
(simplify_if_then_else): Likewise for variables `op' and `c1'.
(simplify_and_const_int): Remove unused variable `width'.
(merge_outer_ops): Likewise.
* cse.c (simplify_binary_operation): Cast an INTVAL() to `unsigned
HOST_WIDE_INT' when comparing against one.
(simplify_relational_operation): Likewise.
(cse_insn): Initialize variables `src_eqv_volatile',
`src_eqv_in_memory', `src_eqv_in_struct', `src_eqv_hash' and `sets'.
* final.c (init_final): Constify parameter `filename'.
(final_start_function): Mark parameter `optimize' with
ATTRIBUTE_UNUSED.
(profile_function): Likewise for parameters `first' and `optimize'.
(output_source_line): Likewise for parameter `file'.
* integrate.c (subst_constants): Cast a value to `size_t' when
comparing against one.
(mark_stores): Initialize variable `mode'. Cast a value to
`size_t' when comparing against one.
* integrate.h (MAYBE_EXTEND_CONST_EQUIV_VARRAY): Likewise.
* loop.c (move_movables): Initialize variable `first'.
(strength_reduce): Likewise for variable `increment'.
(check_dbra_loop): Likewise for variable `comparison_val'. Cast a
value to `size_t' when comparing against one.
(load_mems): Initialize variable `end_label'.
* output.h (init_final): Constify parameter.
* reload.c (decompose): Initialize variable `base'.
* reload1.c (reload): Likewise for variable `is_scalar'.
(spill_hard_reg): Mark parameter `dumpfile' with ATTRIBUTE_UNUSED.
(choose_reload_regs): Initialize variable `mode'.
(emit_reload_insns): Likewise for variable `store_insn'.
(reload_cse_noop_set_p): Mark parameter `insn' with
ATTRIBUTE_UNUSED.
(reload_combine): Initialize variable `set'.
* unroll.c (unroll_loop): Likewise for variable `local_label'.
(copy_loop_body): Cast a value to `size_t' when comparing against
one.
* varasm.c (assemble_variable): Initialize variable `size_tree'.
(const_hash): Add an `else abort()' in an if-else-if-else sequence.
(remove_from_pending_weak_list): Mark parameter `name' with
ATTRIBUTE_UNUSED.
From-SVN: r28860
Include function.h in most files. Remove most of the global variables
duplicated in function.h. Add accessor macros for them which access
current_function. Delete INLINE_HEADER rtx and related code, replace
with code using struct function to store inlining related data.
From-SVN: r28626
�
* reload.c (find_reloads): Emit a USE for a pseudo register without
a hard register if we could not create an optional reload for the
pseudo.
From-SVN: r28103
Mon Mar 15 10:20:20 1999 Mark Mitchell <mark@markmitchell.com>
* reload.c (find_reloads): Add a REG_LABEL note if we substitute a
LABEL_REF for something else.
From-SVN: r25777
* reload.c (find_reloads_subreg_address): New function, broken out of
find_reloads_toplev.
(find_reloads_toplev, find_reloads_address_1): Use it.
From-SVN: r25169
* reload1.c (reload_cse_regs_1): Undo Jan 16 patch.
* reload.c (find_reusable_reload): New function, broken out of
push_reload. Add code to verify that none of the involved
outputs are subject to earlyclobbers.
(push_reload): Break out new function find_reusable_reload.
Delete "register" keyword for IN, OUT args.
From-SVN: r25010
* loop.c (insert_bct): Hide the definition of variables
`increment_direction', `compare_direction', `add_iteration' and
`loop_var_mode'.
* recog.c (mode_dependent_address_p): Mark parameter `addr' with
ATTRIBUTE_UNUSED. Mark label `win' with ATTRIBUTE_UNUSED_LABEL.
(mode_independent_operand): Mark label `lose' with
ATTRIBUTE_UNUSED_LABEL.
* regclass.c (n_occurrences): Remove prototype and definition.
* reload.c (find_reloads_address_1): Mark variable `tem' with
ATTRIBUTE_UNUSED.
* reload1.c (reload): Cast the first two arguments of `bcopy' to PTR.
* sbitmap.c (sbitmap_copy): Likewise.
* scan-decls.c (scan_decls): Hide label `handle_comma'.
* toplev.c (output_lang_identify): Mark prototype with
ATTRIBUTE_UNUSED.
* tree.c (make_node): Cast the first argument of `bzero' to PTR.
(make_tree_vec): Likewise.
(build1): Likewise.
* varasm.c (assemble_static_space): Mark variable `tem' with
ATTRIBUTE_UNUSED.
From-SVN: r24740
* recog.h (enum op_type): Define.
(constrain_operands): Adjust prototype.
(recog_op_type): Declare new variable.
* recog.c (recog_op_type): New variable.
(insn_invalid_p): Allow modifying an asm statement after reload.
(extract_insn): Set up recog_op_type.
(constrain_operands): Lose INSN_CODE_NUM arg. All callers changed.
Don't compute operand types, use recog_op_type.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* caller-save.c (init_caller_save): Use extract_insn, not insn_extract.
* reorg.c (fill_slots_from_thread): Likewise.
* reload1.c (reload_as_needed): Likewise.
(gen_reload): Likewise.
(inc_for_reload): Likewise.
(reload_cse_simplify_operands): Likewise.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* genattrtab.c (write_attr_case): Generate call to extract_insn, not
insn_extract.
* final.c (final_scan_insn): Use extract_insn, not insn_extract.
(cleanup_operand_subregs): Use extract_insn, not insn_extract.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* regmove.c (find_matches): Likewise. Change meaning of the return
value to be nonzero if the optimization can be performed, zero if
not. All callers changed.
Shorten some variable names to fix formatting problems.
(regmove_optimize): Shorten some variable names to fix formatting
problems.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* regclass.c (scan_one_insn): Likewise.
(record_reg_classes): Don't compute operand types, use recog_op_type.
* reload.c (find_reloads): Lose CONSTRAINTS1 variable; use
recog_constraints instead.
From-SVN: r23529
* Makefile.in (insn-extract.o): Fix dependencies.
* genextract.c (main): Generate includes for insn-config.h and
recog.h.
Delete generation of declarations which are now in recog.h.
* genrecog.c (main): Delete generation of definitions which are
now in recog.c.
* local-alloc.c (block_alloc): Use extract_insn and the variables
it sets up instead of looking up values by insn_code.
* recog.c (recog_operand, recog_operand_loc, recog_dup_loc,
recog_dup_num): Define here instead of generating the definition in
genrecog.c.
(recog_n_operands, recog_n_dups, recog_n_alternatives,
recog_operand_mode, recog_constraints, recog_operand_address_p):
New variables.
(extract_insn): New function.
* recog.h (extract_insn): Declare function.
(which_alternative, recog_n_operands, recog_n_dups,
recog_n_alternatives, recog_operand_mode, recog_constraints,
recog_operand_address_p): Declare variables.
* regclass.c (n_occurrences): New static function.
* reload.c (n_occurrences): Delete function.
(find_reloads): Use extract_insn.
* reload.h (n_occurrences): Delete declaration.
From-SVN: r23147
Improve reload inheritance;
* reload.c (reload_out_reg): New variable.
(loc_mentioned_in_p, remove_address_replacements): New functions.
(remove_replacements): Deleted.
(push_reload): Set reload_out_reg[i].
When merging, also set reload_{in,out}_reg[i], and remove
duplicate address reloads.
(combine_reloads): Copy reload_out_reg[i].
(find_reloads): Do make_memloc substitution also when
reg_equiv_memory_loc[regno] and num_not_at_initial_offset
are both nonzero.
Include *recog_operand_loc in commutativity operand changes.
Generate optional output reloads.
Delete reference to n_memlocs. Don't set *recog_operand_loc before
processing operands. Call make_memloc in reg_equiv_address code.
Set *recog_operand_loc only after processing operands, and only
if replace is true. Return a value.
When changing address reload types for operands that didn't get
reloaded, use RELOAD_FOR_OPADDR_ADDRESS for
RELOAD_FOR_INPADDR_ADDRESS / RELOAD_FOR_OUTADDR_ADDRESS reloads.
Don't emit USEs for pseudo SUBREGs when not replacing.
(find_reloads_address): Do make_memloc substitution also when
reg_equiv_memory_loc[regno] and num_not_at_initial_offset
are both nonzero.
(find_reloads_toplev): Likewise.
Call make_memloc in reg_equiv_address code.
(debug_reload_to_stream): Add code to output reload_out_reg.
(make_memloc): Delete local variable i, ifdefed out code, and
references to memlocs and n_memlocs.
(memlocs, n_memlocs): Delete.
(push_secondary_reload): Clear reload_out_reg.
(find_reloads_address_1): Provide memrefloc argument to all calls
to find_reloads_address.
In AUTO_INC code, handle non-directly addressable equivalences properly.
* reload.h (reload_out_reg, num_not_at_initial_offset): Declare.
(find_reloads): Add return type.
(remove_address_replacements, deallocate_reload_reg): Declare.
* reload1.c (num_not_at_initial_offset): No longer static.
(delete_address_reloads, delete_address_reloads_1): Likewise.
(deallocate_reload_reg): New function.
(spill_reg_stored_to): New array.
(eliminate_regs): Don't substitute from reg_equiv_memory_loc.
(eliminate_regs_in_insn): Move assignments of previous_offset and
max_offset fields, and recalculation of num_not_at_initial_offset
into new static function:
(update_eliminable_offsets) .
(reload_as_needed): Call update_eliminable_offsetss after calling
find_reloads.
Call forget_old_reloads_1 with contents of reloaded auto_inc
expressions if the actual addressing can't be changed to match the
auto_inc.
(choose_reload_regs): For inheritance, replace
reload_reg_free_before_p test with reload_reg_ions.
(emit_reload_insns): If reload_in is a MEM, set OLD to
reload_in_reg[j].
Don't reload directly from oldequiv; if it's a pseudo with a
stack slot, use reload_in[j].
Check that reload_in_reg[j] is a MEM before replacing reload_in
from reg_reloaded_contents.
Include non-spill registers in reload inheritance processing.
Also try to use reload_out_reg to set spill_reg_store /
reg_last_reload_reg.
In code to set new_spill_reg_store, use single_set to find out if
there is a single set.
Add code that allows to delete optional output reloads.
Add code to allow deletion of output reloads that use no spill reg.
At the end, set reload_override_in to oldequiv.
Also call delete_output_reload if reload_out_reg is equal to old
in oldequiv code.
Add code to call delete_output_reload for stores with no matching load.
Set / use spill_reg_stored_to.
Handle case where secondary output reload uses a temporary, but
actual store isn't found.
When looking for a store of a value not loaded in order to call
delete_output_reload, count_occurences should return 0 for no
loads; but discount inherited input reloadill_reg_stored_to.
Do checks for extra uses of REG. Changed all
callers.
Use delete_address_reloads.
(reload): Take return value of find_reloads into account.
If a no-op set needs more than one reload, delete it.
(reload_reg_free_before_p): RELOAD_FOR_INPUT
can ignore RELOAD_FOR_INPUT_ADDRESS / RELOAD_FOR_INPADDR_ADDRESS
for the same operand.
(clear_reload_reg_in_use): Check for other reloads that keep a
register in use.
(reload_reg_free_for_value_p): handle RELOAD_FOR_OPERAND_ADDRESS /
RELOAD_FOR_OPADDR_ADDR.
Take into account when an address address reload is only needed
for the address reload we are considering.
(count_occurrences): Use rtx_equal_p for MEMs.
(inc_for_reload): Return instruction that stores into RELOADREG.
New argument two, IN, and rtx. Changed all callers.
(calculate_needs_all_insns, reload_as_needed):
Don't clear after_call for a CLOBBER.
Keep track of how many hard registers need to be copied from
after_call, and don't clear after_call before we have seen
that much copies, or we see a different instruction.
From-SVN: r23143
* Makefile.in (sched.o): Depend on recog.h.
* alias.c (REG_BASE_VALUE): Cast the result of REGNO() macro to
(unsigned) when comparing against one.
(find_base_value): Likewise.
(record_base_value): Cast variable `regno' to (unsigned) when
comparing against one. Cast the result of REGNO() macro to
(unsigned) when comparing against one.
(memrefs_conflict_p): Change type of variables `r_x' and `r_y' to
unsigned.
(init_alias_analysis): Add unsigned variable `ui'. Use it as loop
variable where an unsigned index is needed.
* caller-save.c (init_caller_save): Cast `-1' to (enum insn_code)
before comparing against one.
* collect2.c: Add prototypes for functions `error', `fatal' and
`fatal_perror'. Make these functions take variable arguments
instead of faking it with a fixed number of args.
(write_c_file_stat): Cast the argument of ctype macro to (unsigned
char).
* combine.c (can_combine_p): Mark parameter `pred' with
ATTRIBUTE_UNUSED.
(find_split_point): Cast variable `src' to (unsigned
HOST_WIDE_INT) when comparing against one.
HOST_WIDE_INT) when comparing against one.
(simplify_rtx): Cast 1 to (unsigned HOST_WIDE_INT) in shift.
(simplify_logical): Likewise.
(force_to_mode): Cast result of INTVAL() macro to (unsigned
HOST_WIDE_INT) when comparing against one. Cast 1 to (unsigned
HOST_WIDE_INT) in shift.
(simplify_and_const_int): Cast result of INTVAL() macro to
`unsigned HOST_WIDE_INT' when comparing against one.
(merge_outer_ops): Cast variable const0 to `unsigned
HOST_WIDE_INT' when comparing against the result of
GET_MODE_MASK() macro.
(simplify_comparison): Likewise for variable `c0'. Cast variable
`const_op' to `unsigned HOST_WIDE_INT' when comparing against
one. Cast `1' to `unsigned HOST_WIDE_INT' in shift. Cast the
result of `GET_MODE_MASK()/2' to `HOST_WIDE_INT' when comparing
against one. Cast `1' to `unsigned HOST_WIDE_INT' in shift. Cast
result of INTVAL() macro to `unsigned HOST_WIDE_INT' when
comparing against one.
(distribute_notes): Wrap variable `cc0_setter' in macro `HAVE_cc0'.
config/mips/mips.c (gen_int_relational): Cast result of INTVAL()
macro to `unsigned HOST_WIDE_INT' when comparing against one.
(output_block_move): Cast `sizeof' expression to (int) when
comparing against one.
(function_arg): Cast BITS_PER_WORD to `unsigned' when comparing
against one.
(save_restore_insns): Cast `base_offset' to `long' to match format
specifier in fprintf.
* config/mips/mips.h (Pmode): Cast the result of `Pmode' macro
to `enum machine_mode'.
* flow.c (life_analysis_1): Remove unused variable `insn'.
* gcc.c (translate_options): Move variables `j' and `k' into the
scope in which they are used. Change their types to `size_t'.
(set_spec): Cast the argument of ctype macro to `unsigned char'.
(read_specs): Likewise.
(process_command): Cast `sizeof' to (int) when comparing against one.
(do_spec_1): Cast the argument of ctype macro to `unsigned char'.
(handle_braces): Cast both sides of `==' expression to `long' to
ensure sign matching.
(main): Cast variable `i' to `int' when comparing against one.
* gcov-io.h (__fetch_long): Change type of parameter `bytes' from
int to size_t. Cast variable `i' to size_t when comparing against
one.
* genattrtab.c (convert_set_attr_alternative): Remove unused
parameter `insn_code'. All callers changed.
(convert_set_attr): Likewise.
* genrecog.c (add_to_sequence): Cast result of XVECLEN() macro to
size_t when comparing against one. Likewise for variable `len'.
* global.c (global_alloc): Cast variable `max_regno' to size_t
when comparing against one. Likewise for variable `max_allocno'.
* jump.c (sets_cc0_p): Mark parameter `x' with ATTRIBUTE_UNUSED.
* local-alloc.c (validate_equiv_mem_from_store): Mark parameter
`set' with ATTRIBUTE_UNUSED.
(find_free_reg): Cast `sizeof' expression to (int) when comparing
against one.
* loop.c (count_loop_regs_set): Remove unused variable `dest'.
(strength_reduce): Mark parameter `bct_p' with ATTRIBUTE_UNUSED.
(get_condition): Cast variable `const_val' to `unsigned
HOST_WIDE_INT' when comparing against one. Cast unsigned
expression to HOST_WIDE_INT when comparing against one.
(insert_loop_mem): Mark parameter `data' with ATTRIBUTE_UNUSED.
(load_mems_and_recount_loop_regs_set): Cast variable `nregs' to
`unsigned' when comparing against one.
* protoize.c (is_id_char): Change type of parameter `ch' to
unsigned char.
(munge_compile_params): Cast argument of ctype macro to (const
unsigned char).
(process_aux_info_file): Cast variable `aux_info_size' to int when
comparing against one.
(forward_to_next_token_char): Cast argument of ctype macro to
`const unsigned char'.
(edit_formals_lists): Likewise.
(find_rightmost_formals_list): Likewise.
(add_local_decl): Likewise.
(add_global_decls): Likewise.
(edit_fn_definition): Likewise.
(do_cleaning): Likewise.
(scan_for_missed_items): Likewise.
(edit_file): Cast variable `orig_size' to (int) when comparing
against one.
(main): Cast argument of ctype macro to `const unsigned char'.
* recog.c (const_int_operand): Mark parameter `mode' with
ATTRIBUTE_UNUSED.
* regclass.c (record_reg_classes): Change type of variable `c' to
`unsigned char'. Cast `char' array index to `unsigned char'.
* reload.c (push_secondary_reload): Cast argument to
REG_CLASS_FROM_LETTER() macro to `unsigned char'.
* reload1.c (calculate_needs): Cast `char' array index to
`unsigned char'.
(set_label_offsets): Change type of variable `i' to unsigned int.
Cast result of XVECLEN() macro to unsigned when comparing against
one.
(mark_not_eliminable): Change type of variable `i' to unsigned.
(order_regs_for_reload): Likewise. Cast `max_regno' to unsigned
when comparing against one.
(reload_as_needed): Cast macro NUM_ELIMINABLE_REGS to (int) when
comparing against one.
(choose_reload_regs): Hide unused label `fail'.
(reload_cse_simplify_operands): Cast `char' array index to
`unsigned char'.
(reload_combine_note_store): Mark parameter `set' with
ATTRIBUTE_UNUSED. Cast UNITS_PER_WORD to unsigned when comparing
against one.
(reload_cse_move2add): Remove unused variable `src2'.
* sched.c: Include recog.h.
(sched_note_set): Remove unused parameter `b'. All callers
changed.
(split_hard_reg_notes): Likewise for parameter `orig_insn'.
(blockage_range): Cast result of UNIT_BLOCKED() macro to (int)
when comparing against one.
* stupid.c (stupid_find_reg): Mark parameter `changes_size' with
ATTRIBUTE_UNUSED. Cast `sizeof' expression to (int) when
comparing against one.
* unroll.c (precondition_loop_p): Remove unused parameter
`loop_end'. All callers changed.
From-SVN: r23079
* stmt.c (n_occurrences): New static function.
(expand_asm_operands): Verify that all constrains match in the
number of alternatives.
Verify that '+' or '=' are at the beginning of an output constraint.
Don't allow '&' for input operands.
Verify that '%' isn't written for the last operand.
* reload.c (find_reloads): Abort if an asm is found with invalid
constraints; all possible problems ought to be checked for earlier.
From-SVN: r22911
* reload.c (find_reloads): In code to promote RELOAD_FOR_X_ADDR_ADDR
reloads to RELOAD_FOR_X_ADDRESS reloads, test for reload sharing.
Properly keep track of first RELOAD_FOR_X_ADDRESS also for
more than 3 such reloads.
If there is not more than one RELOAD_FOR_X_ADDRESS, don't change
RELOAD_FOR_X_ADDR_ADDR reload.
From-SVN: r22568
* reload.c (operands_match_p): Handle rtvecs.
* i386.c (legitimate_pic_address_disp_p): New.
(legitimate_address_p): Use it.
(legitimize_pic_address): Use unspecs to represent @GOT and @GOTOFF.
Handle constant pool symbols just like statics.
(emit_pic_move): Use Pmode not SImode for clarity.
(output_pic_addr_const) [SYMBOL_REF]: Remove @GOT and @GOTOFF hacks.
[UNSPEC]: New, handling what we killed above.
[PLUS]: Detect and abort on invalid symbol arithmetic.
* i386.h (CONSTANT_ADDRESS_P): Remove HIGH.
From-SVN: r21968
* rtlanal.c (reg_overlap_mentioned_p): Handle STRICT_LOW_PART. If
either argument is CONSTANT_P, then return zero.
* reload.c (reg_overlap_mentioned_for_reload_p): Similarly.
From-SVN: r21005
Sun Jun 7 09:30:31 1998 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* reload.c (find_reloads): Give preference to pseudo that was the
reloaded output of previous insn.
From-SVN: r20955
* reload.c (find_reloads): If there are multiple
RELOAD_FOR_INPUT_ADDRESS / RELOAD_FOR_OUTPUT_ADDRESS reloads for
one operand, change RELOAD_FOR_INPADDR_ADDRESS /
RELOAD_FOR_OUTADDR_ADDRESS for all but the first
RELOAD_FOR_INPUT_ADDRESS / RELOAD_FOR_OUTPUT_ADDRESS reloads.
From-SVN: r20877
* reload.c (find_reloads_toplev): Use gen_lowpart common to convert
between constant representations when we have (SUBREG (REG)) with
REG equivalent to a constant.
From-SVN: r20398
* reload.c (find_reloads): Record the existing mode if
operand_mode == VOIDmode before replacing a register with
a constant.
* i386.md (tstsi, tsthi, tstqi, tstsf, tstdf, tstxf): Set
i386_compare_op1 to const0_rtx for the benefit of the
conditional move patterns.
(movsicc, movhicc, movsfcc, movdfcc, movxfcc, movdicc): Rewrite
based on suggestions from Jim Wilson.
From-SVN: r20151
