* combine.c (nonzero_bits): If using reg_nonzero_bits,
we don't know anything about bits outside of X mode.
(num_sign_bit_copies): Likewise.
From-SVN: r48239
* basic-block.h (free_bb_for_insn): Declare.
* bb-reorder.c (label_for_bb): Use block_label.
(emit_jump_to_block_after): Remove.
(insert_intra_1): Do not update block_for_insn.
(insert_inter_bb_scope_notes): Likewise; update bb->end
* cfg.c (free_bb_for_insn): New.
(try_rediret_by_replacing_jump): Avoid set_block_for_new_insns call.
(force_nonfallthru_and_redirect): Likewise; do not update BB boundaries.
(commit_one_edge_insertion): Likewise.
(commit_one_edge_insertion): Do not update BB boundary.
(commit_edge_insertions): Do not call compute_bb_for_insn.
* cfgbuild.c (find_basic_blocks): Do not free basic_block_for_insn.
* cfgcleanup.c (merge_blocks_move_predecessor): Use reorder_insns_nobb.
(merge_blocks_move_successor_nojumps): Likewise.
(try_crossjump_to_edge): Do not update block_for_insn.
* combine.c (combine_instructions): Remove compute_bb_for_insn call.
* df.c (df_pattern_emit_later): Do not update BB boundary.
(df_jump_pattern_emit_after): Likewise.
(df_insn_move_before): Use emit_insn_before.
* emit-rtl.c (try_split): Emit after trial to get bb boundary updated
properly.
(add_insn_after, add_insn_before, emit_insns_after): Update BB
boundaries and basic_block_for_insn.
(reorder_insns_nobb): Rename from reorder_insns.
(reorder_insns): New.
(emit_block_insn_before, emit_block_insn_after): Kill.
* flow.c (check_function_return_warnings): Do not call
compute_bb_for_insn; Do not free basic_block_for_insn.
(attempt_auto_inc): Do not update basic_block_for_insn.
* function.c (emit_return_into_block): Likewise;
do not update BB boundaries.
* gcse.c (handle_avail_expr): Do not update basic_block_for_insn.
(insert_insn_end_bb): Use emit_insn_before; Likewise.
(pre_insert_copy_insn): Likewise.
(update_ld_motion_notes): Likewise.
(insert_insn_start_bb): Likewise.
(replace_store_insn): Likewise.
* ifcvt.c (noce_process_if_block): Likewise.
(if_convert): Do not call compute_bb_for_insn.
* lcm.c (optimize_mode_switching): Do not update BB boundaries.
Use emit_insn_before and emit_insn_after.
* recog.c (split_all_insns): Do not update BB boundaries;
Do not call compute_bb_for_insn.
(peephole2_optimize): Do not update BB boundaries.
* reg-stack.c (emit_pop_insn): Use emit_insn_after and
emit_insn_before.
(emit_swap_insn): Likewise.
(convert_regs_1): Likewise.
* reload1.c (reload): Call compute_bb_for_insn.
* rtl.h (reorder_insns_nobb): Declare.
* ssa.c (rename_equivalent_regs): Use emit_insn_before.
* toplev.c (rest_of_compilation): Call free_bb_for_insn
at places CFG is invalidated; do not call compute_bb_for_insn.
* cfg.c (expunge_block): Invalidate BB structure.
* (merge_blocks_nomove): Update properly BLOCK_FOR_INSN
array.
* cfg.c (verify_flow_info): Verify the basic_block_for_insn array.
From-SVN: r45647
* combine.c (combine_simplify_rtx): Don't reverse condition
if there is no reverse for the condition.
(simplify_comparison): Don't simplify subregs from INT to FP.
* gcc.c-torture/execute/ieee/fp-cmp-4.c (main): Make "data" static.
* gcc.c-torture/execute/ieee/fp-cmp-5.c: New.
From-SVN: r45220
* expmed.c (mode_for_extraction): New function.
(store_bit_field, extract_bit_field): Use it.
* expr.h: Prototype it and provide an enum for its first argument.
* combine.c, function.c, recog.c: Don't include insn-codes.h.
Use mode_for_extraction rather than testing HAVE_insv/extv/extzv
and digging through the insn_data tables.
* Makefile.in: Update dependencies.
From-SVN: r45086
* optabs.h (OTI_flodiv, flodiv_optab): Kill.
* genopinit.c: Put floating point divide insns in sdiv_optab.
* expr.c (expand_expr): Use sdiv_optab, not flodiv_optab.
* config/gofast.h, config/c4x/c4x.h,
config/ia64/hpux_longdouble.h, config/mips/mips.h,
config/pa/long_double.h, config/rs6000/sysv4.h,
config/sparc/sparc.h: Put floating point divide libcalls in sdiv_optab.
* optabs.c (init_optab): Break into new_optab, init_optab, init_optabv.
(init_optabs): Use init_optabv for overflow-trapping optabs.
Don't init flodiv_optab. Give mov_optab, movstrict_optab, and
cmp_optab RTX codes so have_insn_for can find them.
* optabs.c (expand_simple_binop, expand_simple_unop,
have_insn_for, gen_sub3_insn): New interfaces.
* expr.h: Prototype new functions.
(enum optab_methods): Move here from optabs.h.
* builtins.c, combine.c, doloop.c, function.c, ifcvt.c,
loop.c, profile.c, simplify-rtx.c, stmt.c, unroll.c:
Use new functions instead of working directly with optabs.
* doloop.c, ifcvt.c, loop.c, profile.c, simplify-rtx.c,
unroll.c: Don't include optabs.h.
* caller-save.c, combine.c, function.c, stmt.c: Just include
insn-codes.h, not optabs.h.
* Makefile.in: Update dependencies.
* combine.c (make_compound_operation, simplify_comparison):
Fix typos testing for this or that instruction.
From-SVN: r45008
* expr.h: Split out optab- and libfunc-related code to...
* optabs.h, libfuncs.h: ... these new headers.
* Makefile.in (CONFIG_H, EXPR_H): Take out insn-codes.h.
(OPTABS_H): New.
(various .o rules): Add $(OPTABS_H) and/or libfuncs.h to
dependencies.
* mkconfig.sh: Don't include insn-codes.h from config.h.
* reload.h: Use #ifdef GCC_INSN_CODES_H to decide whether
enum insn_code is available. Move reload_in_optab and
reload_out_optab array declarations to optabs.h.
* regmove.c (gen_add3_insn): Move to optabs.c, export from
there, prototype in expr.h.
* gencodes.c: Cleanup: zap global variables, don't use
printf where puts will do, don't bother defining MAX_INSN_CODE
which nothing uses, let CODE_FOR_nothing get its value implicitly.
* genemit.c, genopinit.c: Include optabs.h in generated file.
* genoutput.c: Include insn-codes.h in generated file.
* builtins.c, caller-save.c, combine.c, doloop.c, explow.c,
expmed.c, expr.c, function.c, ifcvt.c, loop.c, optabs.c, profile.c,
reload1.c, simplify-rtx.c, stmt.c, unroll.c, config/alpha/alpha.c,
config/arm/arm.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/i386/i386.c, config/ia64/ia64.c, config/mn10300/mn10300.c,
config/pj/pj.c, config/sh/sh.c, config/sparc/sparc.c:
Include optabs.h.
* builtins.c, calls.c, dwarf2out.c, except.c, expr.c, function.c,
optabs.c, stmt.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/m88k/m88k.c, config/sparc/sparc.c:
Include libfuncs.h.
* reload.c: Include expr.h and optabs.h before reload.h.
* config/alpha/alpha.c: Include tree.h before reload.h.
* config/pa/pa.c: Include expr.h, optabs.h, libfuncs.h,
and reload.h in that order.
* config/sparc/sparc.c: Include debug.h.
* recog.c: Include insn-codes.h.
cp:
* Make-lang.in (cp/except.o): Add libfuncs.h to dependencies.
* except.c: Include libfuncs.h.
java:
* Make-lang.in (java/decl.o): Update dependencies.
* decl.c: Include libfuncs.h, don't include toplev.h.
From-SVN: r44858
* combine.c (recog_for_combine): Use the fake recog
only if instruction does not match.
* rtl.h (NOOP_MOVE_INSN_CODE): New.
* rtlanal.c (noop_move_p): Always return 1 for NOOP_MOVE_INSN_CODE.
* combine.c (try_combine): Discover noop jump as direct jump.
From-SVN: r44464
* basic-block.h (find_sub_basic_block): Declare.
* flow.c (make_edges): New arguments MIN and MAX;
(find_sub_basic_blocks): Revamp to use make_edges
and purge_dead_edges.
(find_basic_blocks): Update call of find_sub_basic_block.
* recog.c (split_all_insns): Always expect CFG to be consistent;
call find_sub_basic_blocks in case something has changed.
* toplev.c (rest_of_compilation): Always call split_all_insns once CFG
has been built.
* basic-block.h (delete_noop_moves): Declare.
* combine.c (combine_instructions): Call it.
(recog_for_combine): Tolerate noop moves
(distribute_notes): Force refresh when register dies at noop move.
* flow.c (delete_noop_moves): Use BB structure; delete JUMP insns
too.
(life_analysis): Update delete_noop_moves call.
(set_noop_p): Move too ...
* rtlanal.c (noop_move_p): ... here.
* rtl.h (noop_move_p): Declare.
* basic-block.h (purge_all_dead_edges, purge_dead_edges): New functions.
* toplev.c (rest_of_compilation): Conditionally call purge_all_dead_edges
after combine.
* gcse.c (cprop_cc0_jump, cprop_insn): New argument "basic_block".
(cprop_jump): Likewise; call purge_dead_edges if substitution suceeded.
From-SVN: r44267
* optabs.c (can_extend_p) Check HAVE_ptr_extend for a specialized
pointer extension instruction.
* combine.c (nonzero_bits,num_sign_bit_copies) Likewise.
* simplify-rtx.c (simplify_unary_operation) Likewise.
* explow.c (convert_memory_address) Check value of
POINTERS_EXTEND_UNSIGNED to avoid some conversions when
less than zero.
* config/ia64/t-hpux (LIBGCC, INSTALL_LIBGCC, MULTILIB_OPTIONS,
MULTILIB_DIRNAMES, MULTILIB_MATCHES) Add multilib support.
* config/ia64/hpux.h (CPP_SPEC, ASM_SPEC, SUBTARGET_SWITCHES)
Add Multilib Support.
(POINTERS_EXTEND_UNSIGNED) Define for ILP32 support.
* config/ia64/ia64.h (MASK_ILP32, TARGET_ILP32, SUBTARGET_SWITCHES)
Add Multilib Support.
(POINTER_SIZE, LONG_TYPE_SIZE, MAX_LONG_TYPE_SIZE) Modify for ILP32
support.
* config/ia64/ia64.c (rtx_needs_barrier) Add support for addp4.
* config/ia64/ia64.md (ptr_extend) New instruction to "swizzle"
a 32 bit HP-UX pointer into a 64 bit HP-UX pointer.
From-SVN: r44166
2001-07-18 Toon Moene <toon@moene.indiv.nluug.nl>
* combine.c (combine_simplify_rtx): DIV can be treated
associatively for floats if unsafe math optimisations are enabled.
From-SVN: r44097
* combine.c (combine_simplify_rtx): Attempt to simplify
a*(b/c) as (a*b)/c for floats in unsafe_math mode.
* simplify-rtx.c (avoid_constatn_pool_reference): New static function.
(simplify_binary_operation, simplify_unary_operation,
simplify_relational_operation): Use it.
* combine.c (combine_simplify_rtx): Don't do associative law
on divisions; allow associative law on floats.
From-SVN: r44073
* gcov.c (output_data): Use HOST_WIDEST_INT_PRINT_DEC to output
variables of type HOST_WIDEST_INT.
* libgcc2.c (__bb_exit_func): Handle gcov_type as long long.
(__bb_exit_func): Correct type of count_max to avoid overflow.
(num_digits): Handle long long argument.
* combine.c (gen_lowpart_for_combine): Remove unused variable.
From-SVN: r44033
2001-07-06 Diego Novillo <dnovillo@redhat.com>
* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
call to simplify_binary_operation returns a new pattern.
From-SVN: r43826
* predict.def: New file.
* predict.h: New file.
* predict.c: Include predict.h.
(predictor_info): New structure and array.
(predict_edge, predict_insn): Rewrite; make global.
(predict_edge_def, predict_insn_def): New global functions.
(dump_prediction, combine_predictions_for_insns): New
static functions.
(estimate_probability): Change calls to predict_edge
to predict_edge_def and calls to predict_insn to predict_insn_def;
combine probabilities.
(expected_value_to_br_prob): Behave as predictor.
* rtl.h (REG_BR_PRED): Update coment.
(invert_br_probabilities): New.
* jump.c: Include predict.h
(duplicate_loop_exit_test): Drop branch prediction notes.
(invert_jump): Use invert_br_probabilities.
* Makefile.in: Add dependancy on predict.h for jump and predict pass.
* ifcvt.c (dead_or_predicable): Use invert_br_probabilities.
* combine.c (distribute_notes): Handle BR_PRED.
From-SVN: r43115
* rtlanal.c (operand_preference): Fix preference for objects.
* gcse.c (handle_avail_expr): Be prepared to handle single_set
parallels.
* combine.c (if_then_else_cond): Use simplify_subreg instead
of operand_subword.
* integreate.c (sub_constants): Likewise.
* emit-rtl.c (constant_subword): Deprecate; remove most of code
and use simplify_gen_subreg.
Mon Jun 4 19:55:23 CEST 2001 Lars Brinkhoff <lars@nocrew.org>
* sibcall.c (skip_copy_to_return_value): recognize the situation
when the called function's return value is copied into an
intermediate pseudo, and then into the calling functions return
value register.
From-SVN: r42864
* simplify_rtx.c (simplify_subreg): Keep subregs on return values,
check CLASS_CANNOT_CHANGE_MODE before avoiding subreg on hard reg,
in case register wasn't OK previously, accept it now; allow
subregs of frame pointer if reload completed and frame pointer
is not needed.
* combine.c (sombine_simplify_rtx): Fix comment;
use subreg_lowpart_offset instead of subreg_lowpart_p
(gen_lowpart_for_combine): Use subreg_lowpart_offset.
* rtl.h (subreg_lowpart_parts_p): Kill.
(subreg_lowpart_offset, subreg_highpart_offset): Declare.
* simplify-rtx.c (simplify_subreg): Use subreg_lowpart_offset.
* emit-rtl.c (gen_lowpart_SUBREG): Use subreg_lowpart_offset;
(gen_lowpart_common): Likewise.
(subreg_lowpart_p): Likewise.
(subreg_lowpart_parts_p): Kill.
(subreg_lowpart_offset, subreg_highpart_offset): New function.
* emit-rtl.c (gen_lowpart_common): Use simplify_gen_subreg
to simplify SUBREG and REG.
(gen_highpart): Use simplify_gen_subreg for all simplifications.
* emit-rtl.c (gen_realpart, gen_imagpart): Do not handle
CONCAT specially.
* rtlanal.c (replace_regs): Use simplify_gen_subreg
From-SVN: r42850
2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
* combine.c (undobuf): Remove field previous_undos; all refs deleted.
(gen_rtx_combine): Deleted; all references changed as appropriate.
(gen_unary): Deleted; all refs changed to call simplify_gen_unary.
From-SVN: r40577
* combine.c (known_cond): Do not reverse the condition when
SMAX/UMAX is being considered and the condition is for equality
or inequality.
* testsuite/gcc.c-torture/execute/20010221-1.c: New test.
From-SVN: r40077
* combine.c (nonzero_bits, case PLUS): If pointers extend unsigned
and this is the sum of a pointer and a constant, we know the result
did not overflow.
(num_sign_bit_copies, case PLUS): Likewise.
* explow.c (convert_memory_address): Remove opposite SUBREG.
* function.c (instantiate_new_reg): New function (from common code).
(instantiate_virtual_regs_1): Call it.
For PLUS, handle if (plus (subreg (virt-reg) (const_int))
if pointers sign- or zero-extend.
* simplify-rtx.c (simplify_unary_operation, case ZERO_EXTEND):
If pointers extend unsigned, use inside of SUBREG.
(simplify_unary_operation, case SIGN_EXTEND): Likewise, if sign extend.
From-SVN: r39489
* combine.c (combine_simplify_rtx): If the modes are all VOIDmode,
check the original operand's mode also.
* simplify-rtx.c (simplify_ternary_operation): Ditto.
From-SVN: r39247
* combine.c (try_combine): Don't set i3_subst_into_i2 for
case of making new double-word constant.
Revert last change: instead just test i3_subst_into_i2.
From-SVN: r39094
* combine.c (reversed_comparison): Fix typo in last patch.
Check X for NULL.
(combine_reversed_comparison_code): Make static to follow
prototype declaration.
Co-Authored-By: Jan Hubicka <jh@suse.cz>
From-SVN: r38942
* combine.c (combine_simplify_rtx): Recognize the unordered compares.
(nonzero_bits): Likewise.
(simplify_comparison): Likewise.
(num_sign_bit_copies): Likewise; return more sane value depending
on STORE_FLAG_VALUE.
(known_cond): Do not assume EQ to be always true for equivalent
operands.
From-SVN: r38774
* function.h (emit_status): Delete member regno_pointer_flag and
rename regno_pointer_flag_length to regno_pointer_align_length.
Delete define for REGNO_POINTER_FLAG.
* integrate.h (inline_remap): Delete member regno_pointer_flag.
Add member x_regno_reg_rtx.
* rtl.h (rtx_def): Use frame_related bit to indicate register is
a pointer in REG expressions. Define REG_POINTER macro.
* alias.c (find_base_value, find_base_term): Use REG_POINTER
instead of REGNO_POINTER_FLAG.
* combine.c (nonzero_bits, num_sign_bit_copies): Likewise.
* emit-rtl.c (gen_reg_rtx): Use regno_pointer_align_length instead
of regno_pointer_flag_length. Remove code which refers to
regno_pointer_flag.
(mark_reg_pointer): Use REG_POINTER.
(free_emit_status): Remove code which refers to regno_pointer_flag.
(init_emit, mark_emit_status): Likewise.
* flow.c (dump_flow_info): Likewise.
* function.c (preserve_temp_slots): Likewise.
* integrate.c (expand_inline_function, copy_rtx_and_substitute):
Use x_regno_reg_rtx instead of regno_pointer_flag for function
pointer determination in map.
* loop.c (strength_reduce, maybe_eliminate_biv_1): Use REG_POINTER.
* predict.c (estimate_probability): Likewise.
* regclass.c (record_address_regs, reg_scan_mark_refs): Likewise.
* unroll.c (unroll_loop): Use x_regno_reg_rtx instead of
regno_pointer_flag for function pointer determination in map.
* convex.h (RTX_COSTS): Don't test regno_pointer_flag and use
REG_POINTER.
* pa.c (hppa_legitimize_address, emit_move_sequence, basereg_operand):
Use REG_POINTER.
(restore_unscaled_index_insn_codes): Revise comment.
From-SVN: r37863
* flow.c (verify_local_live_at_start): Back out last change.
* combine.c (distribute_notes): When parts of a hard reg are
neither set nor referenced in PLACE, search backwards for a
place to put a REG_UNUSED note; if none found, ask for flow
info refresh.
From-SVN: r37284
* combine.c (distribute_notes): Use rtx_equal_p to check elim_i2 /
elim_i1.
In REG_DEAD handling: When handling parts of multi-hard-reg hard
registers, increment the loop counter by the size of the parts;
use recursion to handle individual parts.
From-SVN: r37211
* combine.c (struct undo): Change int to unsigned int.
(do_SUBST_INT): Args are unsigned int.
(make_extraction, force_to_mode): Use proper type when forming mask.
(make_field_assignment): Likewise.
From-SVN: r36967
* combine.c (combine_simplify_rtx): Use gen_unary to distribute
the NOT for De Morgan's rule.
* simplify-rtx.c (simplify_unary_operation): Simplify a BImode NOT
of a comparison to the reverse comparison.
From-SVN: r36506
* machmode.def: Add BImode. Add a column for bitsize.
* machmode.h (DEF_MACHMODE): Adjust for extra column.
(GET_MODE_BITSIZE): Use it.
* rtl.c (DEF_MACHMODE): Adjust for extra column.
(mode_bitsize): New.
(mode_mask_array): Use bitsize.
* combine.c (combine_simplify_rtx): Require inner and outer
modes to match on nonzero_bits optimizations.
From-SVN: r36501
* combine.c (simplify_if_then_else): Don't convert a == b ? b : a
to a if the comparison is floating mode and not -ffast-math.
* simplify-rtx.c (simplify_ternary_operation): Likewise.
From-SVN: r36326
* combine.c (recog_for_combine): Remove the old notes
prior to attempting to recognize the new pattern.
(distribute_notes): Ignore REG_NONNEG notes.
From-SVN: r35492
* combine.c (simplify_set, make_extraction, make_compound_operation
make_field_assignment): Use full mask instead of GET_MODE_MASK (mode)
as force_to_mode argument.
From-SVN: r35348
* simplify-rtx.c (simplify_relational_operation): Verify that mode ==
VOIDmode implies both operands to be VOIDmode.
(simplify_ternary_operation): Compute properly the mode of comparison.
* combine.c (combine_simplify_rtx): Likewise.
From-SVN: r35343
* combine.c (combine_simplify_rtx): Don't create an if_then_else
unless both args are general_operand. Don't canonicalize plus
to ior unless it helps.
From-SVN: r34247
* md.texi (Standard Names): Clarify when movX is needed.
* combine.c (simplify_comparison) [MINUS]: Do not replace
all (op (minus A B) 0) with (op A B).
From-SVN: r32940
modify sizes to be unsigned and use HOST_WIDE_INT.
* alias.c (reg_known_value_size): Now unsigned.
* c-typeck.c (build_unary_op, case ADDR_EXPR): Use byte_position.
(really_start_incremental_init): Use bitsize_zero_node.
(push_init_level, pop_init_level, output_init_element): Likewise.
Use bitsize_unit_node and bitsize_one_node.
(output_pending_init_elements, process_init_element): Likewise.
* combine.c (combine_max_regno, reg_sign_bit_copies): Now unsigned.
(make_extraction): Position and length HOST_WIDE_INT and unsigned
HOST_WIDE_INT, respectively.
(get_pos_from_mask): Passed in value is unsigned HOST_WIDE_INT.
(num_sign_bit_copies): Returns unsigned.
BITWIDTH now unsigned; rework arithmetic.
Remove recursive call from arg to MAX.
(combine_instructions, init_reg_last_arrays): NREGS now unsigned.
(setup_incoming_promotions, can_combine_p, try_combine, simplify_set):
REGNO now unsigned.
(set_nonzero_bit_and_sign_copies): NUM now unsigned.
(find_split_point, expand_compound_operation, make_extraction): LEN
now unsigned HOST_WIDE_INT, POS now HOST_WIDE_INT.
(make_field_assignment): Likewise.
(combine_simplify_rtx): Add cast.
(expand_compound_operation): MODEWIDTH now unsigned; rework arithmetic.
(force_to_mode): WIDTH now unsigned; add cast.
(if_then_else_cond): SIZE now unsigned.
(nonzero_bits): MODE_WIDTH, RESULT_WIDTH, and WIDTH now unsigned.
(extended_count): Now returns unsigned.
(simplify_shift_const): COUNT unsigned; arg is now INPUT_COUNT.
Add SIGNED_COUNT variable; MODE_WORDS and FIRST_COUNT now unsigned.
(simplify_comparison): MODE_WIDTH now unsigned.
(update_table_tick): REGNO and ENDREGNO now unsigned; new var R.
(mark_used_regs_combine): Likewise; rework arithmetic.
(record_value_for_reg): REGNO, ENDREGNO, and I now unsigned.
(record_dead_and_set_regs, reg_dead_at_p, distribute_notes): Likewise.
(record_promoted_value): REGNO now unsigned.
(get_last_value_validate): REGNO, ENDREGNO, and J now unsigned.
(get_last_value): REGNO now unsigned.
(use_crosses_set_p): REGNO and ENDREGNO now unsigned.
(reg_dead_regno, reg_dead_endregno): Now unsigned.
(remove_death): Arg REGNO now unsigned.
(move_deaths): REGNO, DEADREGNO, DEADEND, OUREND, and I now unsigned.
(reg_bitfield_target_p): REGNO, REGNO, ENDREGNO, and ENDTREGNO
now unsigned.
* convert.c (convert_to_integer): INPREC and OUTPREC now unsigned.
* cse.c (struct qty_table_elem): FIRST_REG and LAST_REG now unsigned.
(struct cse_reg_info): REGNO now unsigned.
(cached_regno): Now unsigned.
(REGNO_QTY_VALID_P): Add cast.
(make_new_qty, make_regs_eqv, delete_reg_eqiv): Regno args unsigned.
(remove_invalid_regs): Likewise.
(remove_invalid_subreg_refs): Likewise; arg WORD also unsigned
as are variables END and I.
(get_cse_reg_info, insert): Likewise.
(mention_regs, invalidate_for_call): REGNO, ENDREGNO, and I unsigned.
(canon_hash): Likewise.
(insert_regs, lookup_for_remove): REGNO now unsigned.
(invalidate): REGNO, ENDREGNO, TREGNO, and TENDREGNO now unsigned.
New variable RN.
* dbxout.c (dbxout_parms, dbxout_reg_parms): Don't check for REGNO < 0.
* dwarf2out.c (dwarf2ou_frame_debug_expr): Remove cast.
* emit-rtl.c (subreg_realpart_p): Add cast.
(operand_subword): Arg I is now unsigned as is var PARTWORDS.
(operand_subword_force): Arg I is now unsigned.
* except.c (eh_regs): Variable I is now unsigned.
* explow.c (hard_function_value): BYTES is unsigned HOST_WIDE_INT.
* expmed.c (store_fixed_bit_field): Position is HOST_WIDE_INT;
length is unsigned HOST_WIDE_INT; likewise for internal variables.
(store_split_bit_field, extract_fixed_bit_field): Likewise.
(extract_split_bit_field, store_bit_field, extract_bit_field):
Likewise.
* expr.c (store_constructor_fields, store_constructor, store_field):
Positions are HOST_WIDE_INT and lengths are unsigned HOST_WIDE_INT.
(expand_assignment, expand_expr, expand_expr_unaligned): Likewise.
(do_jump): Likewise.
(move_by_pieces, move_by_pieces_ninsns, clear_by_pieces):
MAX_SIZE is now unsigned.
(emit_group_load): BYTEPOS is HOST_WIDE_INT; BYTELEN is unsigned.
(emit_group_store): Likewise.
(emit_move_insn): I now unsigned.
(store_constructor): Use host_integerp, tree_low_cst, and
bitsize_unit_node.
(get_inner_reference): Return bitpos and bitsize as HOST_WIDE_INT.
Rework all calculations to use trees and new fields.
* expr.h (promoted_input_arg): Regno now unsigned.
(store_bit_field, extract_bit_field): Adjust types of pos and size.
(mark_seen_cases): Arg is HOST_WIDE_INT.
* flow.c (verify_wide_reg_1): REGNO now unsigned.
* fold-const.c (decode_field_reference): Size and pos HOST_WIDE_INT;
precisions and alignments are unsigned.
(optimize_bit_field_compare, fold_truthop): Likewise.
(int_const_binop): Adjust threshold for size_int_type_wide call.
(fold_convert): Likewise.
(size_int_type_wide): Make table larger and fix thinko that only
had half of table used.
(all_ones_mask_p, fold): Precisions are unsigned.
* function.c (put_reg_info_stack): REGNO is unsigned.
(instantiate_decl): Size is HOST_WIDE_INT.
(instantiate_virtual_regs): I is unsigned.
(assign_parms): REGNO, REGNOI, and REGNOR are unsigned.
(promoted_input_arg): REGNO is unsigned.
* function.h (struct function): x_max_parm_reg is now unsigned.
* gcse.c (max_gcse_regno): Now unsigned.
(struct null_pointer_info): min_reg and max_reg now unsigned.
(lookup_set, next_set): REGNO arg now unsigned.
(compute_hash_table): REGNO and I now unsigned.
(handle_avail_expr): regnum_for_replacing now unsigned.
(cprop_insn): REGNO now unsigned.
(delete_null_pointer_checks_1): BLOCK_REG now pointer to unsigned.
* ggc-common.c (ggc_mark_tree_children, case FIELD_DECL): New case.
* global.c (set_preference): SRC_REGNO, DEST_REGNO, and I now unsigned.
* hard-reg-set.h (reg_class_size): Now unsigned.
* integrate.c (mark_stores): LAST_REG and I now unsigned; new UREGNO.
* jump.c (mark_modified_reg): I now unsigned; add cast.
(rtx_equal_for_thread_p): Add cast.
* loop.c (max_reg_before_loop): Now unsigned.
(struct_movable): REGNO now unsigned.
(try_copy_prop): REGNO arg unsigned.
(regs_match_p): XN and YN now unsigned.
(consec_sets_invariant_p, maybe_eliminate_biv): REGNO now unsigned.
(strength_reduce): Likewise; NREGS also unsigned.
(first_increment_giv, last_increment_giv unsigned): Now unsigned.
* loop.h (struct iv_class): REGNO now unsigned.
(max_reg_before_loop, first_increment_giv, last_increment_giv):
Now unsigned.
* machmode.h (mode_size, mode_unit_size): Now unsigned.
(mode_for_size, smallest_mode_for_size): Pass size as unsigned.
* optabs.c (expand_binop): I and NWORDS now unsigned.
(expand_unop): I now unsigned.
* print-tree.c (print_node): Don't print DECL_FIELD_BITPOS, but do
print DECL_FIELD_OFFSET and DECL_FIELD_BIT_OFFSET.
* real.c (significand_size): Now returns unsigned.
* real.h (significand_size): Likewise.
* regclass.c (reg_class_size): Now unsigned.
(choose_hard_reg_mode): Both operands now unsigned.
(record_reg_classes): REGNO and NR now unsigned.
(reg_scan): NREGS now unsigned.
(reg_scan_update): old_max_regno now unsigned.
(reg_scan_mark_refs): Arg MIN_REGNO and var REGNO now unsigned.
* reload.c (find_valid_class): BEST_SIZE now unsigned.
(find_dummy_reload): REGNO, NWORDS, and I now unsigned.
(hard_reg_set_here_p): Args BEG_REGNO and END_REGNO now unsigned.
Likewise for variable R.
(refers_to_regno_for_reload_p): Args REGNO and END_REGNO now unsigned,
as are variables INNER_REGNO and INNER_ENDREGNO; add new variable R.
(find_equiv_reg): Add casts.
(regno_clobbered_p): Arg REGNO now unsigned.
* reload.h (struct reload): NREGS now unsigned.
(refers_to_regno_for_reload_p): Regno args are unsigned.
(regno_clobbered_p): Likewise.
* reload1.c (reg_max_ref_width, spill_stack_slot_width): Now unsigned.
(compute_use_by_pseudos): REGNO now unsigned.
(find_reg): I and J now unsigned, new variable K, and change loop
variables accordingly; THIS_NREGS now unsigned.
(alter_reg): INHERENT_SIZE and TOTAL_SIZE now unsigned.
(spill_hard_reg): REGNO arg now unsigned; add casts.
(forget_old_reloads_1): REGNO, NR, and I now unsigned.
(mark_reload_reg_in_use): Arg REGNO and vars NREGS and I now unsigned.
(clear_reload_reg_in_use): Arg REGNO and vars NREGS, START_REGNO,
END_REGNO, CONFLICT_START, and CONFLICT_END now unsigned.
(reload_reg_free_p, reload_reg_reaches_end_p): Arg REGNO now unsigned.
(choose_reload_regs): MAX_GROUP_SIZE now unsigned.
(emit_reload_insns): REGNO now unsigned.
(reload_cse_move2add): Add cast.
(move2add_note_store): REGNO and I now unsigned; new variable ENDREGNO
and rework loop.
* resource.c (mark_referenced_resources, mark_set_resources): New
variable R; REGNO and LAST_REGNO now unsigned.
(mark_target_live_regs): J and REGNO now unsigned.
* rtl.c (mode_size, mode_unit_size): Now unsigned.
* rtl.h (union rtunion_def): New field rtuint.
(XCUINT): New macro.
(ADDRESSOF_REGNO, REGNO, SUBREG_WORD): New XCUINT.
(operand_subword, operand_subword_force): Word number is unsigned.
(choose_hard_reg_mode): Operands are unsigned.
(refers_to-regno_p, dead_or_set_regno_p): Regno arg is unsigned.
(find_regno_note, find_regno_fusage, replace_regs): Likewise.
(regno_use_in, combine_instructions, remove_death): Likewise.
(reg_scan, reg_scan_update): Likewise.
(extended_count): Return is unsigned.
* rtlanal.c (refers_to_regno_p): Args REGNO and ENDREGNO and vars I,
INNER_REGNO, and INNER_ENDREGNO now unsigned; new variable X_REGNO.
(reg_overlap_mentioned_p): REGNO and ENDREGNO now unsigned.
(reg_set_last_first_regno, reg_set_last_last_regno): Now unsigned.
(reg_reg_last_1): FIRS and LAST now unsigned.
(dead_or_set_p): REGNO, LAST_REGNO, and I now unsigned.
(dead_or_set_regno_p): Arg TEST_REGNO and vars REGNO and ENDREGNO
now unsigned.
(find_regno_note, regno_use_in): Arg REGNO now unsigned.
(find_regno_fusage): Likewise; also var REGNOTE now unsigned.
(find_reg_fusage): Variables REGNO, END_REGNO, and I now unsigned.
(replace_regs): Arg NREGS now unsigned.
* sdbout.c (sdbout_parms, sdbout_reg_parms): Don't check REGNO < 0.
* simplify-rtx.c (simplify_unary_operation): WIDTH now unsigned.
(simplify_binary_operation): Likewise.
(cselib_invalidate_regno): Arg REGNO and variables ENDREGNO, I, and
THIS_LAST now unsigned.
(cselib_record_set): Add cast.
* ssa.c (ssa_max_reg_num): Now unsigned.
(rename_block): REGNO now unsigned.
* stmt.c (expand_return): Bit positions unsigned HOST_WIDE_INT;
sizes now unsigned.
(all_cases_count): Just return -1 not -2.
COUNT, MINVAL, and LASTVAL now HOST_WIDE_INT.
Rework tests to use trees whenever possible.
Use host_integerp and tree_low_cst.
(mark_seen_cases): COUNT arg now HOST_WIDE_INT;
Likewise variable NEXT_NODE_OFFSET; XLO now unsigned.
(check_for_full_enumeration_handing): BYTES_NEEDED, I to HOST_WIDE_INT.
* stor-layout.c (mode_for_size): SIZE arg now unsigned.
(smallest_mode_for_size): Likewise.
(layout_decl): Simplify handing of a specified DECL_SIZE_UNIT.
KNOWN_ALIGN is now an alignment, so simplify code.
Don't turn off DECL_BIT_FIELD if field is BLKmode, but not type.
(start_record_layout): Renamed from new_record_layout_info.
Update to new fields.
(debug_rli, normalize_rli, rli_size_unit_so_far, rli_size_so_far):
New functions.
(place_union_field): Renamed from layout_union_field.
Update to use new fields in rli.
(place_field): Renamed from layout_field.
Major rewrite to use new fields in rli; pass alignment to layout_decl.
(finalize_record_size): Rework to use new fields in rli and handle
union.
(compute_record_mode): Rework to simplify and to use new DECL fields.
(finalize_type_size): Make rounding more consistent.
(finish_union_layout): Deleted.
(layout_type, case VOID_TYPE): Don't set TYPE_SIZE_UNIT either.
(layout_type, case RECORD_TYPE): Call new function names.
(initialize_sizetypes): Set TYPE_IS_SIZETYPE.
(set_sizetype): Set TYPE_IS_SIZETYPE earlier.
(get_best_mode): UNIT is now unsigned; remove casts.
* tree.c (bit_position): Compute from new fields.
(byte_position, int_byte_position): New functions.
(print_type_hash_statistics): Cast to remove warning.
(build_range_type): Use host_integerp and tree_low_cst to try to hash.
(build_index_type): Likewise; make subtype of sizetype.
(build_index_2_type): Pass sizetype to build_range_type.
(build_common_tree_nodes): Use size_int and bitsize_int to
initialize nodes; add bitsize_{zero,one,unit}_node.
* tree.h (DECL_FIELD_CONTEXT): Use FIELD_DECL_CHECK.
(DECL_BIT_FIELD_TYPE, DECL_QUALIFIER, DECL_FCONTEXT): Likewise.
(DECL_PACKED, DECL_BIT_FIELD): Likewise.
(DECL_FIELD_BITPOS): Deleted.
(DECL_FIELD_OFFSET, DECL_FIELD_BIT_OFFSET): New fields.
(DECL_RESULT, DECL_SAVED_INSNS): Use FUNCTION_DECL_CHECK.
(DECL_FRAME_SIZE, DECL_FUNCTION_CODE, DECL_NO_STATIC_CHAIN): Likewise.
(DECL_INLINE, DECL_BUILT_IN_NONANSI, DECL_IS_MALLOC): Likewise.
(DECL_BUILT_IN_CLASS, DECL_STATIC_CONSTRUCTOR): Likewise.
(DECL_STATIC_DESTRUCTOR, DECL_NO_CHECK_MEMORY_USAGE): Likewise.
(DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT, DECL_NO_LIMIT_STACK) Likewise.
(DECL_ORIGINAL_TYPE, TYPE_DECL_SUPPRESS_DEBUG): Use TYPE_DECL_CHECK.
(DECL_ARG_TYPE_AS_WRITEN, DECL_ARG_TYPE): Use PARM_DECL_CHECK.
(DECL_INCOMING_RTL, DECL_TRANSPARENT_UNION): Likewise.
(DECL_ALIGN): Adjust to new field in union.
(DECL_OFFSET_ALIGN): New field.
(DECL_ERROR_ISSUED, DECL_TOO_LATE): Use LABEL_DECL_CHECK.
(DECL_IN_TEXT_SECTION): Use VAR_DECL_CHECK.
(union tree_decl): Add struct for both aligns.
(enum tree_index): Add TI_BITSIZE_{ZERO,ONE,UNIT}.
(bitsize_zero_node, bitsize_one_node, bitsize_unit_node): Added.
(struct record_layout_info): Rework fields to have offset
alignment and byte and bit position.
(start_record_layout, place_field): Renamed from old names.
(rli_size_so_far, rli_size_unit_so_far, normalize_rli): New decls.
(byte_position, int_byte_position): Likewise.
(get_inner_reference): Change types of position and length.
* unroll.c (unroll_loop): New variable R; use for some loops.
MAX_LOCAL_REGNUM and MAXREGNUM now unsigned.
(calculate_giv_inc): Arg REGNO now unsigned.
(copy_loop_body): REGNO and SRC_REGNO now unsigned.
* varasm.c (assemble_variable): Clean up handling of size using
host_integerp and tree_low_cst.
(decode_addr_const): Use byte, not bit, position.
(output_constructor): bitpos and offsets are HOST_WIDE_INT;
use tree_low_cst and int_bit_position.
* objc/objc-act.c (build_ivar_list_initializer): Use byte_position.
* ch/actions.c (check_missing_cases): BYTES_NEEDED is HOST_WIDE_INT.
* ch/typeck.c (expand_constant_to_buffer): Use int_byte_position.
(extract_constant_from_buffer): Likewise.
* cp/class.c (build_vbase_pointer_fields): layout_field now
place_field.
(get_vfield_offset): Use byte_position.
(set_rtti_entry): Set OFFSET to ssizetype zero.
(get_binfo_offset_as_int): Deleted.
(dfs_record_base_offsets): Use tree_low_cst.
(dfs_search_base_offsets): Likewise.
(layout_nonempty_base_or_field): Reflect changes in RLI format
and call byte_position.
(layout_empty_base): Convert offset to ssizetype.
(build_base_field): use rli_size_unit_so_far.
(dfs_propagate_binfo_offsets): Do computation in proper type.
(layout_virtual_bases): Pass ssizetype to propagate_binfo_offsets.
(layout_class_type): Reflect changes in RLI names and fields.
(finish_struct_1): Set DECL_FIELD_OFFSET.
* cp/dump.c (dequeue_and_dump): Call bit_position.
* cp/expr.c (cplus_expand_constant): Use byte_position.
* cp/rtti.c (expand_class_desc): Use bitsize_one_node.
* cp/typeck.c (build_component_addr): Use byte_position and don't
special case for zero offset.
* f/com.c (ffecom_tree_canonize_ptr_): Use bitsize_zero_node.
(ffecom_tree_canonize_ref_): Likewise.
* java/class.c (make_field_value): Use byte_position.
* java/expr.c (JAVA_ARRAY_LENGTH_OFFSET): Use byte_position.
(java_array_data_offset): Likewise.
* java/java-tree.h (MAYBE_CREATE_TYPE_TYPE_LANG_SPECIFIC): Add case to
bzero call.
From-SVN: r32742
* toplev.c (rest_of_compilation): Rebuild jump labels if
combine_instructions has created a new direct jump.
* combine.c (try_combine): Add new_direct_jump_p argument. Set it
when appropriate.
(combine_instructions): Call try_combine with new argument.
Return non-null value when new direct jump instruction is created.
* rtl.h: combine_instructions returns an int.
From-SVN: r32162
* combine.c (try_combine) [HAVE_cc0]: Trying to check the missed
case 3->2 combining (combining with splitting) in which 2 is CC0
setter/user and 3 is user. The rest of cases 2->1 and 3->2 are
checked at the begining of the function with the aid of calling
function 'can_combine_p'.
From-SVN: r31727
* combine.c (expand_compound_operation): Do not convert ZERO_EXTEND to
SIGN_EXTEND, convert SIGN_EXTEND to ZERO_EXTEND.
(make_compound_operation): Choose cheaper alternative between
ZERO_EXTEND and SIGN_EXTEND when sign bit is not set.
From-SVN: r31180
* combine.c (check_promoted_subreg, record_promoted_value): New
functions.
(combine_instructions): Use them to retain nonzero and sign bit
information after SUBREGs are eliminated by optimizations in
this pass if PROMOTE_FUNCTION_RETURN.
From-SVN: r30808
* combine.c (if_then_else_cond): Use const_true_rtx instead of
const1_rtx for return values in EQ/NE comparison against (const_int 0)
case.
From-SVN: r30749
* combine.c (try_combine): Add code to try to merge a set of a
two-word pseudo to a constant with a setting of one of those words
to a constant.
From-SVN: r30674
Fri Oct 29 15:25:07 1999 Arnaud Charlet <charlet@ACT-Europe.FR>
* gcov.c (DIR_SEPARATOR): Provide default.
(output_data): Add test for MS-DOS format absolute filename.
(fancy_abort): Correct program name.
(open_files): Open all files in binary mode.
* libgcc2.c (__bb_exit_func): Likewise.
* profile.c (init_branch_prob): Specify binary when opening files.
* flags.h (flag_unwind_tables): New decl.
* toplev.c (flag_unwind_table): New definition.
(f_options): Add -funwind-tables.
(decode_g_option): Clarify warning when unknown -g option is given.
(rest_of_compilation): If inside an inlined external function,
pretend we are just being declared.
* dwarf2out.c (dwarf2out_do_frame): Check -funwind_tables.
(dwarf2out_frame_finish): Likewise.
Fri Oct 29 06:32:44 1999 Geoffrey Keating <geoffk@cygnus.com>
* flow.c (propagate_block): When the last reference to a label
before an ADDR_VEC is deleted because the reference is a dead
store, delete the ADDR_VEC.
Fri Oct 29 07:44:26 1999 Vasco Pedro <vp@di.fct.unl.pt>
* fold-const.c (merge_ranges): In not in0, but in1, handle
upper bounds equal like subset case.
Thu Oct 28 19:22:24 1999 Douglas Rupp <rupp@gnat.com>
* dbxout.c (dbxout_parms): Generate a second stabs line for parameters
passed in a register but moved to the stack.
Thu Oct 28 19:12:57 1999 Sam Tardieu <tardieu@act-europe.fr>
* gcc.c (pass_exit_codes, greatest_status): New variables.
(struct option_map): Add entry for "--pass-exit-codes".
(execute): Update greatest_status if error.
(display_help): Add documentation for -pass-exit-codes.
(process_command): Handle -pass-exit-codes.
(main): Look at pass_exit_codes and greatest_status on call to exit.
Thu Oct 28 18:06:50 1999 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* reload.c (find_reloads): Refine test for no input reload
case to not includes reloads emitted after insn.
* function.c (find_temp_slots_from_address): Handle sum involving
a register that points to a temp slot.
(update_temp_slot_address): Make recursive call if both old and
new are PLUS with a common operand.
* calls.c (expand_call): Mark temp slot for result as having
address taken.
* rtlanal.c (reg_referenced_p, case IF_THEN_ELSE): New case.
* gcc.c (process_command): Add standard_exec_prefix with "GCC"
component as well as "BINUTILS".
* integrate.h (copy_rtx_and_substitute): New arg, FOR_LHS.
* integrate.c (copy_rtx_and_substitute): Likewise.
(expand_inline_function, integrate_parm_decls, integrate_decl_tree):
All callers changed.
* unroll.c (inital_reg_note_copy, copy_loop_body): Likewise.
* dbxout.c (dbxout_type, case INTEGER_TYPE_NODE): If can use
gdb extensions, write size of type; also be more consistent
in using references when this is a subtype.
* pa.md (extv, extzv, insv): Use define_expand to reject constant
that is out of range.
* loop.c (unknown_constant_address_altered): New variable.
(prescan_loop): Initialize it.
(note_addr_stored): Set it for RTX_UNCHANGING_P MEM.
(invariant_p, case MEM): Remove handling for volatile and readony;
check new variable if readonly.
(check_dbra_loop): Chdeck unknown_constant_address_altered.
* cse.c (canon_hash, case MEM): Do not record if BLKmode.
(addr_affects_sp_p): Removed from note_mem_written and only
define #ifdef AUTO_INC_DEC.
* alpha.c (input_operand, case ADDRESSOF): Treat as REG.
* regclass.c (record_reg_classes): Properly handle register move
directions.
* varasm.c (initializer_constant_valid_p, case MINUS_EXPR):
Don't think valid if both operands are invalid.
(struct constant_descriptor): New field RTL.
(mark_const_hash_entry): Mark it.
(record_constant{,_rtx}): Initialize it.
(output_constant_def): Allocate RTL in permanent obstack and
save in table.
({record,compare}_constant_1): Modes must match for
CONSTRUCTOR of ARRAY_TYPE.
* c-common.h (initializer_constant_valid_p): Delete decl from here.
* output.h (initializer_constant_valid_p): Move decl to here.
* c-common.c (initializer_constant_valid_p): Delete function from here.
* varasm.c (initializer_constant_valid_p): Move function to here.
* tree.h (STRIP_SIGN_NOPS): New macro.
* fold-const.c (optimize_minmax_comparison): New function.
(invert_truthvalue, case WITH_RECORD_EXPR): New case.
(fold): Use STRIP_SIGN_NOPS instead of STRIP_TYPE_NOPS.
(fold, case EQ_EXPR): Call optimize_minmax_comparison and add
cases with ABS_EXPR, NEGATE_EXPR, PLUS_EXPR, MINUS_EXPR, and
widening conversions.
(fold, case LE_EXPR): Rework changing unsigned to signed comparisons
to look at size of mode, not precision of type; also add missing cases.
(optimize_bit_field_compare, decode_field_reference): Don't try to
optimize COMPONENT_REF of a PLACEHOLDER_EXPR.
* dwarf2out.c (ctype.h): Include.
(dwarf2out_set_demangle_name_func): New function.
(size_of_line_info): Deleted.
(output_line_info): Compute size of line info table from difference
of labels.
(base_type_die, add_name_attribute): Call demangle function, if any.
(field_byte_offset): Use bits per word for variable length fields.
(gen_array_type_die): Add array name.
(gen_subprogram_die): Ignore DECL_INLINE if -fno-inline.
(dwarf2out_add_library_unit_info): New function.
* explow.c (set_stack_check_libfunc): New function.
(stack_check_libfunc): New static variable.
(probe_stack_range): Allow front-end to set up a libfunc to call.
* combine.c (simplify_comparison): When making comparison in wider
mode, check for having commuted an AND and a SUBREG.
(contains_muldiv): New function.
(try_combine): Call it when dividing a PARALLEL.
(simplify_rtx, case TRUNCATE): Don't remove for umulsi3_highpart.
(simplify_comparison, case ASHIFTRT): Recognize sign-extension of
a PLUS.
(record_value_for_reg): If TEM is a binary operation with two CLOBBERs,
use one of the CLOBBERs instead.
(if_then_else_cond): If comparing against zero, just return thing
being compared.
* optabs.c (expand_abs): If machine has MAX, ABS (x) is MAX (x, -x).
Don't generate shifts and subtract if have conditional arithmetic.
* rtl.h (delete_barrier): New declaration.
* jump.c (jump_optimize): Set up to handle conditional call.
In conditional arithmetic case, handle CALL_INSN followed by a BARRIER.
(delete_barrier): New function.
* rtl.c (read_rtx): Call fatal if bad RTL code; check for bad mode.
* recog.c (nonmemory_operand): Accept ADDRESSOF.
* tree.c (build_type_attribute_variant): Push to obstack of
ttype around type_hash_canon call.
* expr.c (placeholder_list): Move decl to file scope.
(expand_expr): Don't force access to volatile just because its
address is taken.
If ignoring reference operations, just expand the operands.
(expand_expr, case COMPONENT_REF): Propagate
EXPAND_CONST_ADDRESS to recursive call when expanding inner.
Refine test for using bitfield operations vs pointer punning.
(expand_expr, case CONVERT_EXPR): If converting to
BLKmode UNION_TYPE from BLKmode, just return inner object.
Use proper mode in store_field call.
Properly set sizes of object to store and total size in store_field
call for convert to union.
(expand_expr, case ARRAY_REF): If OP0 is in a register, put it in
memory (like for ADDR_EXPR). Also, don't put constant in register if
we'll want it in memory.
(readonly_fields_p): New function.
(expand_expr, case INDIRECT_REF): Call it if LHS.
(expand_assignment): Handle a RESULT_DECL where
DECL_RTL is a PARALLEL.
(do_jump, case WITH_RECORD_EXPR): New case.
(get_inner_reference): Always go inside a CONVERT_EXPR
and NOP_EXPR if both modes are the same.
(store_field): Use bitfield operations if size of bitsize is not same
as size of RHS's type.
Check for bitpos not a multiple of alignment in BLKmode case.
Do block move in largest possible alignment.
(store_constructor): Set BITSIZE to -1 for variable size and properly
in case of array of BLKmode.
(expand_expr_unaligned): New function.
(do_compare_and_jump): Call it.
* mips/iris5.h (SWITCHES_NEED_SPACES): New macro.
* collect2.c (main): Only allow -ofoo if SWITCHES_NEED_SPACES
does not include 'o'.
* function.c (instantiate_virtual_regs_1, case SET): Handle case where
both SET_DEST and SET_SRC reference a virtual register.
(gen_mem_addressof): Copy RTX_UNCHANGING_P from new REG to old REG.
* integrate.c (expand_inline_function): Handle case of setting
virtual stack vars register (from built in setjmp); when parameter
lives in memory, expand virtual_{stack_vars,incoming_args}_rtx early.
(subst_constant): Add new parm, MEMONLY.
(expand_inline_function, integrate_parm_decls): Pass new parm.
(integrate_decl_tree): Likewise.
(copy_rtx_and_substitute, case MEM): Do copy RTX_UNCHANGING_P.
(try_constants): Call subst_constants twice, with MEMONLY 0 and 1.
(copy_rtx_and_substitute, case SET): Add explicit calls to
copy_rtx_and_substitute for both sides.
* stmt.c (expand_asm_operands): Don't use TREE_STRING_LENGTH for
constraints.
(pushcase{,_range}): Convert to NOMINAL_TYPE after checking for
within INDEX_TYPE, instead of before.
(fixup_gotos): Use f->target_rtl, not the next insn,
since latter may be from a later fixup.
(expand_value_return): Correctly convert VAL when promoting function
return; support RETURN_REG being a PARALLEL.
(expand_return): When checking for result in regs and having
cleanup, consider PARALLEL in DECL_RTL as being in regs.
From-SVN: r30299
* basic-block.h (PROP_*): Move constants from ...
* flow.c: ... here.
(compute_bb_for_insn): Free the array before reallocating.
(update_life_info): New arg PROP_FLAGS; pass on to propagate_block.
(allocate_reg_life_data): Reset all reg variables collected by
propagate_block.
(get_block_head_tail): Don't convert from bb to block.
(get_bb_head_tail): New. Update all callers of get_block_head_tail.
(find_insn_reg_weight): Take block not bb.
(schedule_block): Don't set block num for moved insns.
(schedule_region): Don't update_life_info or find_insn_reg_weight.
(schedule_insns): Do it here instead.
* combine.c (combine_instructions): Invoke compute_bb_for_insn
before update_life_info.
* recog.c (split_all_insns, peephole2_optimize): Update for
new arg to update_life_info.
* rtlanal.c (remove_note): Cope with NULL note.
* toplev.c (rest_of_compilation): Don't invoke recompute_reg_usage
if we did sched1.
From-SVN: r30103
* combine.c (get_last_value): If the last set of a register
is after subst_low_cuid, then we can not use it to determine
the register's last value.
From-SVN: r30062
* fold-const.c (fold): Move bit_rotate code to the EXPR_PLUS case,
falltrought to assocate code.
Convert XOR to OR in code like (a&c1)^(a&c2) where c1 and c2 don't have
bits in common.
* combine.c (simplify_logical): Convert XOR to IOR if operands have
no bits in common; remove XOR to ROTATE conversion.
From-SVN: r29998
* Makefile.in (flow.o): Depend on TREE_H.
* basic-block.h (REG_SET_EQUAL_P): New.
(XOR_REG_SET): New.
(n_edges): Declare.
(free_regset_vector): Remove declaration.
(flow_delete_insn_chain): Declare.
(enum update_life_extent): New.
(update_life_info, count_or_remove_death_notes): Declare.
* combine.c (distribute_notes) [REG_DEAD]: Stop search at bb->head.
Verify register live at bb->global_live_at_start before adding USE.
* flow.c (HAVE_epilogue, HAVE_prologue): Provide default.
(CLEAN_ALLOCA): New.
(n_edges): New.
(PROP_*): New flags.
(find_basic_blocks_1): Use alloc_EXPR_LIST.
(clear_edges): Zero n_edges.
(make_edge): Increment n_edges.
(split_edge): Don't allocate bb->local_set. Increment n_edges.
(flow_delete_insn_chain): Export.
(delete_block): Decrement n_edges.
(merge_blocks_nomove): Likewise.
(life_analysis): Give life_analysis_1 PROP flags.
(verify_wide_reg_1, verify_wide_reg): New.
(verify_local_live_at_start): New.
(update_life_info): Rewrite to call into propogate_block.
(mark_reg): New.
(mark_regs_live_at_end): After reload, if epilogue as rtl,
always mark stack pointer. Conditionally mark PIC register.
After reload, mark call-saved registers, return regsiters.
(life_analysis_1): Accept PROP flags not remove_dead_code.
Call mark_regs_live_at_end before zeroing regs_ever_live.
Use calculate_global_regs_live. Copy global_live_at_end before
calling final propagate_block. Zero reg_next_use on exit.
(calculate_global_regs_live): New.
(allocate_bb_life_data): Don't allocate bb->local_set.
(init_regset_vector, free_regset_vector): Remove.
(propagate_block): Accept FLAGS not FINAL or REMOVE_DEAD_CODE.
Test flags before every operation. Warn if prologue/epilogue insn
would have been deleted.
(mark_set_regs, mark_set_1): Accept and use FLAGS.
Use alloc_EXPR_LIST.
(mark_used_regs): Accept and use FLAGS, not FINAL.
Remove special handling for RETURN.
(try_pre_increment): Use alloc_EXPR_LIST.
(dump_flow_info): Dump n_edges.
(unlink_insn_chain, split_hard_reg_notes): Remove.
(maybe_add_dead_note, maybe_add_dead_note_use): Remove.
(find_insn_with_note, new_insn_dead_notes): Remove.
(update_n_sets, sets_reg_or_subreg_1, sets_reg_or_subreg): Remove.
(maybe_remove_dead_notes, prepend_reg_notes): Remove.
(replace_insns): Remove.
(count_or_remove_death_notes): New.
(verify_flow_info): Abort on error after all checks.
(remove_edge): Decrement n_edges.
(remove_fake_edges): Tweek format.
* haifa-sched.c (schedule_insns): Use split_all_insns.
* output.h (update_life_info): Remove declaration.
* recog.c (split_all_insns): From the corpse of split_block_insns,
do the whole function block by block. Use update_life_info.
(recog_last_allowed_insn): New.
(recog_next_insn): Mind it.
(peephole2_optimize): Set it. Walk backwards through blocks.
Use update_life_info.
* rtl.h (update_flow_info, replace_insns): Remove declarations.
(split_all_insns): Declare.
* toplev.c (rest_of_compilation): Thread prologue before flow2.
Use split_all_insns.
* i386.md (or -1 peep2s): Disable.
From-SVN: r29877
* combine.c (nonzero_bits) : Allow single-ly set registers to be
anywere in the function only if they are pseudos and set before
being used (not live at the start of the function).
(num_sign_bit_copies) : Same.
(get_last_value_validate) : Same.
(get_last_value) : Same.
From-SVN: r28871
* calls.c (emit_call_1): Mark parameter `stack_size' with
ATTRIBUTE_UNUSED.
(expand_call): Initialize variable `insn'.
(emit_library_call): Likewise for variable `high_to_save'.
(emit_library_call_value): Likewise.
(store_one_arg): Likewise for variables `lower_bound' and
`upper_bound'.
* combine.c (try_combine): Likewise for variables `i2_code_number'
and `other_code_number'.
(find_split_point): Likewise for variables `pos', `unsignedp' and
`inner'.
(simplify_if_then_else): Likewise for variables `op' and `c1'.
(simplify_and_const_int): Remove unused variable `width'.
(merge_outer_ops): Likewise.
* cse.c (simplify_binary_operation): Cast an INTVAL() to `unsigned
HOST_WIDE_INT' when comparing against one.
(simplify_relational_operation): Likewise.
(cse_insn): Initialize variables `src_eqv_volatile',
`src_eqv_in_memory', `src_eqv_in_struct', `src_eqv_hash' and `sets'.
* final.c (init_final): Constify parameter `filename'.
(final_start_function): Mark parameter `optimize' with
ATTRIBUTE_UNUSED.
(profile_function): Likewise for parameters `first' and `optimize'.
(output_source_line): Likewise for parameter `file'.
* integrate.c (subst_constants): Cast a value to `size_t' when
comparing against one.
(mark_stores): Initialize variable `mode'. Cast a value to
`size_t' when comparing against one.
* integrate.h (MAYBE_EXTEND_CONST_EQUIV_VARRAY): Likewise.
* loop.c (move_movables): Initialize variable `first'.
(strength_reduce): Likewise for variable `increment'.
(check_dbra_loop): Likewise for variable `comparison_val'. Cast a
value to `size_t' when comparing against one.
(load_mems): Initialize variable `end_label'.
* output.h (init_final): Constify parameter.
* reload.c (decompose): Initialize variable `base'.
* reload1.c (reload): Likewise for variable `is_scalar'.
(spill_hard_reg): Mark parameter `dumpfile' with ATTRIBUTE_UNUSED.
(choose_reload_regs): Initialize variable `mode'.
(emit_reload_insns): Likewise for variable `store_insn'.
(reload_cse_noop_set_p): Mark parameter `insn' with
ATTRIBUTE_UNUSED.
(reload_combine): Initialize variable `set'.
* unroll.c (unroll_loop): Likewise for variable `local_label'.
(copy_loop_body): Cast a value to `size_t' when comparing against
one.
* varasm.c (assemble_variable): Initialize variable `size_tree'.
(const_hash): Add an `else abort()' in an if-else-if-else sequence.
(remove_from_pending_weak_list): Mark parameter `name' with
ATTRIBUTE_UNUSED.
From-SVN: r28860
Include function.h in most files. Remove most of the global variables
duplicated in function.h. Add accessor macros for them which access
current_function. Delete INLINE_HEADER rtx and related code, replace
with code using struct function to store inlining related data.
From-SVN: r28626
* combine.c (simplify_logical, case AND): Only call
simplify_and_const_int if the mode is no wider than HOST_WIDE_INT
or the constant is positive.
From-SVN: r27517
* combine.c (num_sign_bit_copies): In NEG, MULT, DIV and MOD cases,
when a test can't be performed due to limited width of
HOST_BITS_PER_WIDE_INT, use the more conservative approximation.
Fix UDIV case for cases where the first operand has the highest bit
set.
From-SVN: r24547
* Makefile.in (recog.o): Depend on toplev.h.
(insn-emit.o): Depend on recog.h.
(insn-peep.o): Depend on recog.h and insn-config.h.
* combine.c (simplify_set): Remove unused variable `scratches'.
* final.c (final_scan_insn): Wrap declaration of variables `vlen'
and `idx' in macro conditional controlling their use.
* genemit.c (main): Make the generated output file include
recog.h. Don't have it declare `insn_operand_constraint', since
we get it from recog.h.
* genpeep.c (main): Make the generated output file include
insn-config.h and recog.h.
* recog.c: Include toplev.h.
(extract_insn): Remove unused variable `p'.
* regclass.c (fix_register): Add missing braces around initializer
for `what_option'.
(allocate_reg_info): Move variable `i' into the scope where it is
used. Change its type to `size_t'.
From-SVN: r23307
* Makefile.in (sched.o): Depend on recog.h.
* alias.c (REG_BASE_VALUE): Cast the result of REGNO() macro to
(unsigned) when comparing against one.
(find_base_value): Likewise.
(record_base_value): Cast variable `regno' to (unsigned) when
comparing against one. Cast the result of REGNO() macro to
(unsigned) when comparing against one.
(memrefs_conflict_p): Change type of variables `r_x' and `r_y' to
unsigned.
(init_alias_analysis): Add unsigned variable `ui'. Use it as loop
variable where an unsigned index is needed.
* caller-save.c (init_caller_save): Cast `-1' to (enum insn_code)
before comparing against one.
* collect2.c: Add prototypes for functions `error', `fatal' and
`fatal_perror'. Make these functions take variable arguments
instead of faking it with a fixed number of args.
(write_c_file_stat): Cast the argument of ctype macro to (unsigned
char).
* combine.c (can_combine_p): Mark parameter `pred' with
ATTRIBUTE_UNUSED.
(find_split_point): Cast variable `src' to (unsigned
HOST_WIDE_INT) when comparing against one.
HOST_WIDE_INT) when comparing against one.
(simplify_rtx): Cast 1 to (unsigned HOST_WIDE_INT) in shift.
(simplify_logical): Likewise.
(force_to_mode): Cast result of INTVAL() macro to (unsigned
HOST_WIDE_INT) when comparing against one. Cast 1 to (unsigned
HOST_WIDE_INT) in shift.
(simplify_and_const_int): Cast result of INTVAL() macro to
`unsigned HOST_WIDE_INT' when comparing against one.
(merge_outer_ops): Cast variable const0 to `unsigned
HOST_WIDE_INT' when comparing against the result of
GET_MODE_MASK() macro.
(simplify_comparison): Likewise for variable `c0'. Cast variable
`const_op' to `unsigned HOST_WIDE_INT' when comparing against
one. Cast `1' to `unsigned HOST_WIDE_INT' in shift. Cast the
result of `GET_MODE_MASK()/2' to `HOST_WIDE_INT' when comparing
against one. Cast `1' to `unsigned HOST_WIDE_INT' in shift. Cast
result of INTVAL() macro to `unsigned HOST_WIDE_INT' when
comparing against one.
(distribute_notes): Wrap variable `cc0_setter' in macro `HAVE_cc0'.
config/mips/mips.c (gen_int_relational): Cast result of INTVAL()
macro to `unsigned HOST_WIDE_INT' when comparing against one.
(output_block_move): Cast `sizeof' expression to (int) when
comparing against one.
(function_arg): Cast BITS_PER_WORD to `unsigned' when comparing
against one.
(save_restore_insns): Cast `base_offset' to `long' to match format
specifier in fprintf.
* config/mips/mips.h (Pmode): Cast the result of `Pmode' macro
to `enum machine_mode'.
* flow.c (life_analysis_1): Remove unused variable `insn'.
* gcc.c (translate_options): Move variables `j' and `k' into the
scope in which they are used. Change their types to `size_t'.
(set_spec): Cast the argument of ctype macro to `unsigned char'.
(read_specs): Likewise.
(process_command): Cast `sizeof' to (int) when comparing against one.
(do_spec_1): Cast the argument of ctype macro to `unsigned char'.
(handle_braces): Cast both sides of `==' expression to `long' to
ensure sign matching.
(main): Cast variable `i' to `int' when comparing against one.
* gcov-io.h (__fetch_long): Change type of parameter `bytes' from
int to size_t. Cast variable `i' to size_t when comparing against
one.
* genattrtab.c (convert_set_attr_alternative): Remove unused
parameter `insn_code'. All callers changed.
(convert_set_attr): Likewise.
* genrecog.c (add_to_sequence): Cast result of XVECLEN() macro to
size_t when comparing against one. Likewise for variable `len'.
* global.c (global_alloc): Cast variable `max_regno' to size_t
when comparing against one. Likewise for variable `max_allocno'.
* jump.c (sets_cc0_p): Mark parameter `x' with ATTRIBUTE_UNUSED.
* local-alloc.c (validate_equiv_mem_from_store): Mark parameter
`set' with ATTRIBUTE_UNUSED.
(find_free_reg): Cast `sizeof' expression to (int) when comparing
against one.
* loop.c (count_loop_regs_set): Remove unused variable `dest'.
(strength_reduce): Mark parameter `bct_p' with ATTRIBUTE_UNUSED.
(get_condition): Cast variable `const_val' to `unsigned
HOST_WIDE_INT' when comparing against one. Cast unsigned
expression to HOST_WIDE_INT when comparing against one.
(insert_loop_mem): Mark parameter `data' with ATTRIBUTE_UNUSED.
(load_mems_and_recount_loop_regs_set): Cast variable `nregs' to
`unsigned' when comparing against one.
* protoize.c (is_id_char): Change type of parameter `ch' to
unsigned char.
(munge_compile_params): Cast argument of ctype macro to (const
unsigned char).
(process_aux_info_file): Cast variable `aux_info_size' to int when
comparing against one.
(forward_to_next_token_char): Cast argument of ctype macro to
`const unsigned char'.
(edit_formals_lists): Likewise.
(find_rightmost_formals_list): Likewise.
(add_local_decl): Likewise.
(add_global_decls): Likewise.
(edit_fn_definition): Likewise.
(do_cleaning): Likewise.
(scan_for_missed_items): Likewise.
(edit_file): Cast variable `orig_size' to (int) when comparing
against one.
(main): Cast argument of ctype macro to `const unsigned char'.
* recog.c (const_int_operand): Mark parameter `mode' with
ATTRIBUTE_UNUSED.
* regclass.c (record_reg_classes): Change type of variable `c' to
`unsigned char'. Cast `char' array index to `unsigned char'.
* reload.c (push_secondary_reload): Cast argument to
REG_CLASS_FROM_LETTER() macro to `unsigned char'.
* reload1.c (calculate_needs): Cast `char' array index to
`unsigned char'.
(set_label_offsets): Change type of variable `i' to unsigned int.
Cast result of XVECLEN() macro to unsigned when comparing against
one.
(mark_not_eliminable): Change type of variable `i' to unsigned.
(order_regs_for_reload): Likewise. Cast `max_regno' to unsigned
when comparing against one.
(reload_as_needed): Cast macro NUM_ELIMINABLE_REGS to (int) when
comparing against one.
(choose_reload_regs): Hide unused label `fail'.
(reload_cse_simplify_operands): Cast `char' array index to
`unsigned char'.
(reload_combine_note_store): Mark parameter `set' with
ATTRIBUTE_UNUSED. Cast UNITS_PER_WORD to unsigned when comparing
against one.
(reload_cse_move2add): Remove unused variable `src2'.
* sched.c: Include recog.h.
(sched_note_set): Remove unused parameter `b'. All callers
changed.
(split_hard_reg_notes): Likewise for parameter `orig_insn'.
(blockage_range): Cast result of UNIT_BLOCKED() macro to (int)
when comparing against one.
* stupid.c (stupid_find_reg): Mark parameter `changes_size' with
ATTRIBUTE_UNUSED. Cast `sizeof' expression to (int) when
comparing against one.
* unroll.c (precondition_loop_p): Remove unused parameter
`loop_end'. All callers changed.
From-SVN: r23079
* combine.c (make_extraction): If no mode is specified for
an operand of insv, extv, or extzv, default it to word_mode.
(simplify_comparison): Similarly.
* expmed.c (store_bit_field): Similarly.
(extract_bit_field): Similarly.
* function.c (fixup_var_regs_1): Similarly.
* recog.c (validate_replace_rtx_1): Similarly.
* mips.md (extv, extzv, insv expanders): Default modes for most
operands. Handle TARGET_64BIT.
(movdi_uld, movdi_usd): New patterns.
From-SVN: r22439
* alias.c: Include toplev.h
* caller-save.c: Include toplev.h
* combine.c: Include toplev.h
* flow.c Include toplev.h
* global.c: Include toplev.h
* jump.c: Include toplev.h
* local-alloc.c: Include toplev.h
* loop.c: Include toplev.h
* regmove.c: Include toplev.h
* stupid.c: Include toplev.h
* unroll.c: Include toplev.h
* Makefile.in: Add toplev.h dependencies.
From-SVN: r20623
* Makefile.in (c-lang.o): Depend on c-tree.h, c-lex.h and toplev.h.
(c-lex.o): Depend on output.h.
(c-common.o): Likewise.
(stmt.o): Likewise.
(calls.o): Likewise.
(integrate.o): Depend on toplev.h.
(regclass.o): Depend on output.h.
(final.o): Depend on reload.h.
* c-common.c: Include output.h.
(check_format_info): Remove unused variable `integral_format'.
* c-decl.c (print_lang_decl): Mark parameters `file', `node' and
`indent' with ATTRIBUTE_UNUSED.
(print_lang_type): Likewise.
(maybe_build_cleanup): Likewise for parameter `decl'.
(copy_lang_decl): Likewise for parameter `node'.
* c-lang.c: Include c-tree.h, c-lex.h and toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(lookup_interface): Likewise for parameter `arg'.
(is_class_name): Likewise.
(maybe_objc_check_decl): Likewise for parameter `decl'.
(maybe_objc_comptypes): Likewise for parameters `lhs', `rhs' and
`reflexive'.
(maybe_objc_method_name): Likewise for parameter `decl'.
(build_objc_string): Likewise for parameters `len' and `str'.
* c-lex.c: Include output.h.
* c-lex.h (position_after_white_space): Correct typo in prototype.
* c-tree.h (finish_file, c_expand_start_cond, c_expand_start_else,
c_expand_end_cond, init_iterators): Add prototypes.
* caller-save.c (set_reg_live): Mark parameters `reg' and `setter'
with ATTRIBUTE_UNUSED.
* calls.c: Include output.h.
* cccp.c (pipe_closed): Mark parameter `signo' with
ATTRIBUTE_UNUSED.
* combine.c: Move inclusion of expr.h to after insn-config.h.
* iris6.h (ASM_IDENTIFY_GCC, ASM_IDENTIFY_LANGUAGE): Don't define
as empty, rather define as ((void)0).
* sparc.c (sparc_check_64): Add braces around ambiguous `else'.
Add parentheses around assignment used as truth value.
* cplus-dem.c (squangle_mop_up): Change return type to void.
(internal_cplus_demangle): Remove unused parameter `options'.
All callers changed.
(cplus_demangle_opname): Remove function wide variable `int i' and
replace with `size_t i' at each location where it is used.
(cplus_demangle_opname): change type of `i' from int to size_t.
* cppexp.c (right_shift): Mark parameter `pfile' with
ATTRIBUTE_UNUSED.
* cpphash.c (cpp_lookup): Likewise.
(cpp_hash_cleanup): Likewise.
* cpplib.c (parse_name): Add a prototype and make it static.
(null_underflow): Mark parameter `pfile' with ATTRIBUTE_UNUSED.
(null_cleanup): Likewise for parameters `pbuf' and `pfile'.
(macro_cleanup): Likewise for parameter `pfile'.
(file_cleanup): Likewise.
* cpplib.h (cpp_reader_init, cpp_options_init, cpp_start_read,
cpp_read_check_assertion, skip_rest_of_line): Add prototypes.
* crtstuff.c (force_to_data, __CTOR_LIST__, force_to_data,
__DTOR_END__, __FRAME_END__): Mark with ATTRIBUTE_UNUSED.
* cse.c (cse_check_loop_start): Mark parameter `set' with
ATTRIBUTE_UNUSED.
* dbxout.c (flag_minimal_debug, have_used_extensions,
source_label_number): Move inside macro wrapper check against
defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO).
* dwarf2out.c (gen_entry_point_die): Hide prototype and definition.
* except.h (doing_eh): Provide prototype.
* expr.c: Move inclusion of expr.h to after insn-config.h.
* final.c: Include reload.h.
(shorten_branches): Cast the first argument of bzero to char *.
* fix-header.c (cpp_print_containing_files): Mark parameter
`pfile' with ATTRIBUTE_UNUSED.
(cpp_fatal): Likewise.
* flow.c (find_basic_blocks_1): Cast the first argument of bzero
to char *.
* genattrtab.c (make_length_attrs): Change the type of variable
`i' from int to size_t.
(zero_fn): Mark parameter `exp' with ATTRIBUTE_UNUSED.
(one_fn): Likewise.
* genextract.c (main): When generating insn-extract.c, mark
variable `junk' with ATTRIBUTE_UNUSED.
* gengenrtl.c (gencode): When generating genrtl.c, cast the first
argument of bzero to char*.
* integrate.c: Include toplev.h.
* libgcc2.c: Wrap `struct exception_table' and
`find_exception_handler' in macro DWARF2_UNWIND_INFO.
* objc/Make-lang.in (objc-act.o): Depend on toplev.h.
* objc/objc-act.c: Include toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(finish_protocol): Likewise for parameter `protocol'.
* output.h (declare_weak): Add prototype.
(decode_reg_name): Don't wrap with TREE_CODE macro.
(assemble_alias): Add prototype.
* regclass.c: Include output.h.
* reload.h (reloads_conflict): Add prototype.
* rtl.h (print_rtl_single, mark_elimiation, reg_class_subset_p,
output_func_start_profiler): Add prototypes.
* rtlanal.c (reg_set_p_1): Mark parameters `x' and `pat' with
ATTRIBUTE_UNUSED.
* scan-decls.c: Include scan.h.
* scan.h (recognized_function, recognized_extern): Add prototypes.
* stmt.c: Include output.h.
* toplev.c (error_for_asm, warning_for_asm): Remove prototypes.
(output_lang_identify): Hide prototype and definition.
(float_signal): Mark parameter `signo' with ATTRIBUTE_UNUSED.
(pipe_closed): Likewise.
* toplev.h (count_error, strip_off_ending, error_for_asm,
warning_for_asm): Add prototypes.
From-SVN: r19712
* emit-rtl.c (gen_lowpart_common): Suppress last change if __complex__.
* emit-rtl.c (hard-reg-set.h): Include.
(get_lowpart_common): Don't make new REG for hard reg in a
class that cannot change size.
* Makefile.in (emit-rtl.o): Depend on hard-reg-set.h.
* combine.c: Revert previous patch.
Co-Authored-By: Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
From-SVN: r18109
* combine.c (simplify_rtx): Obey CLASS_CANNOT_CHANGE_SIZE when
simplifying a subreg of a hard reg.
(expand_compound_operation): Likewise.
(force_to_mode): Likewise.
From-SVN: r18052
* rtl.c (read_rtx): Use atol/atoq based upon disposition of
HOST_WIDE_INT.
* genattrtab.c (write_test_expr): Use HOST_WIDE_INT_PRINT_DEC
as needed.
* genemit.c (gen_exp): Likewise.
* genpeep.c (match_rtx): Likewise.
* genrecog.c (write_tree_1): Likewise.
* c-lex.c (yyprint): Use proper format string based upon
disposition of HOST_BITS_PER_WIDE_INT.
(yylex): Put casts in right place for args to build_int_2.
* combine.c: Fix typos in Jan27 changes.
From-SVN: r17544
* c-lex.c: Include <stdlib.h> and <string.h>/<strings.h>. Add
prototype for `handle_sysv_pragma', and make it static. Add
parentheses around assignment used as truth value.
* combine.c (combine_instructions): Protect variable `prev' with
macro HAVE_cc0.
(can_combine_p): Protect variable `link' with AUTO_INC_DEC.
(extract_left_shift): Add parentheses around operand of &.
(merge_outer_ops): Avoid an empty body in an else-statement.
(gen_rtx_combine): Remove unused variable `i'.
* sparc/gmon-sol2.c: Include <fcntl.h>. Make return type of
function monstartup `void'. Likewise for internal_mcount. Add
`static void' prototype for moncontrol. Reconcile sprintf format
vs. args.
* sparc/sparc.c: Include <stdlib.h> and <string.h>/<strings.h>.
Make return type of function_arg_slotno explicitly `int'.
(reg_unused_after): Add parentheses around assignment used as
truth value.
(save_regs): Add explicit braces to avoid ambiguous `else'.
(function_arg_slotno): Add parentheses around && within ||.
(function_arg_pass_by_reference): Likewise.
(sparc_flat_output_function_prologue): Reconcile fprintf format
vs. args.
* svr4.h (ASM_OUTPUT_LIMITED_STRING): Add parentheses around
assignment used as truth value.
* cplus-dem.c: Include <stdlib.h>.
(demangle_signature): Avoid an empty body in an else-statement.
(do_type): Remove unused variable `lvl'.
* cppexp.c: Don't have <stdlib.h> depend on MULTIBYTE_CHARS.
Include <string.h>/<strings.h>.
(cpp_lex): Remove unused variable `namelen'.
(cpp_lex): Explicitly declare `num_chars' as an int.
* cpplib.c: Avoid duplicate inclusion of <stdlib.h>, include
<unistd.h> instead. Explicitly declare is_system_include
returning int.
(make_assertion): Remove unused variable `kt'.
(cpp_expand_to_buffer): Hide variable `obuf'.
(output_line_command): Remove unused variables, `line_end',
`line_cmd_buf' and `len'.
(macarg): Remove unused variable `arg_start'.
(special_symbol): Remove unused variable `i'. Add parentheses
around assignment used as truth value.
(do_include): Remove unused variables `pcfname' and `retried',
hide `pcf' and `pcfbuflimit'.
(do_line): Remove unused variable `i'.
(finclude): Hide variable `missing_newline'.
(cpp_handle_options): Remove unused variable `j'.
(read_token_list): Remove unused variable `eofp'.
(cpp_error_with_line): Remove unused variable `i'.
(cpp_warning_with_line): Likewise.
(cpp_pedwarn_with_line): Explicitly declare `column' as int.
(cpp_error_from_errno): Remove unused variable `i'.
* cse.c (invalidate): Add parentheses around assignment used as
truth value.
(find_best_addr): Move declaration of variable `our_cost' inside
the conditional macro where its used.
(fold_rtx): Avoid an empty body in an if-statement.
(cse_insn): Wrap variables `this_insn_cc0_mode' and
`this_insn_cc0' in macro HAVE_cc0.
* dwarf2out.c: Include <stdlib.h> and <string.h>/<string.h>.
(ASM_OUTPUT_DWARF_DATA8): Reconcile format vs. args in fprintf's.
(output_uleb128): Likewise.
(output_sleb128): Likewise.
(output_cfi): Likewise.
(output_call_frame_info): Remove unused variables `j', `fde_size'
and `fde_pad'.
(comp_unit_has_inlines): Hide declaration as per rest of file.
(size_of_line_prolog): Correct typo in prototype.
(add_arange): Likewise.
(output_aranges): Likewise.
(add_name_and_src_coords_attributes): Likewise.
(gen_array_type_die): Likewise.
(gen_inlined_subroutine_die): Likewise.
(equate_decl_number_to_die): Remove unused variable `i'.
(print_die): Reconcile format vs. args in fprintf's.
(print_dwarf_line_table): Likewise.
(output_die): Likewise.
(output_line_info): Likewise.
(add_subscript_info): Avoid an empty body in an else-statement.
(gen_subprogram_die): Remove unused variable `fp_loc'.
* dwarfout.c: Explicitly declare `next_pubname_number' as int.
Protect `ordering_attribute' prototype with USE_ORDERING_ATTRIBUTE
macro. Protect `src_coords_attribute' prototype with
DWARF_DECL_COORDINATES macro. Hide `output_entry_point_die'
prototype as in the rest of the file. Likewise for
`output_pointer_type_die' and `output_reference_type_die'. Remove
prototype for `type_of_for_scope'.
(output_unsigned_leb128): Reconcile format vs. args in fprintf.
(type_attribute): Add explicit braces to avoid ambiguous `else'.
* final.c: Include <stdlib.h> and <string.h>/<strings.h>.
(shorten_branches): Protect declaration of tmp_length with
SHORTEN_WITH_ADJUST_INSN_LENGTH and ADJUST_INSN_LENGTH macros.
(profile_function): Protect declaration of `sval' and `cxt'
variables with appropriate macros.
(final_scan_insn): Likewise for `note' variable. Add explicit
braces to avoid empty body in an if-statement.
(output_asm_insn): Move variable `i' inside macro conditional
where it is used. Add parentheses around assignment used as truth
value.
(asm_fprintf) Likewise, likewise.
* fix-header.c (main): Remove unused variable `done'. Protect
declaration of `i' with FIXPROTO_IGNORE_LIST.
* pexecute.c: Include <unistd.h>. Prototype `my_strerror'.
* print-rtl.c (print_inline_rtx): Explicitly declare the parameter
`ind'.
* profile.c: Include <string.h>/<strings.h>.
(instrument_arcs): Remove unused variables `note', `inverted',
`zero' and `neg_one'.
(branch_prob): Avoid empty body in an if-statement.
* regclass.c: Include <stdlib.h>.
(reg_alternate_class): Explicitly declare parameter `regno'.
* regmove.c (regmove_optimize): Remove unused variable `p'. Add
parentheses around assignment used as truth value.
(find_matches): Remove unused variables `output_operand' and
`matching_operand'.
(fixup_match_1): Remove statement with no effect: "if (0) ;".
* scan.c (sstring_append): Explicitly declare `count' as int.
(scan_string): Explicitly declare parameter `init' as int.
* sched.c: Include <stdlib.h>.
(BLOCKAGE_RANGE): Add parentheses around arithmetic in operand of |.
(rank_for_schedule): Add parentheses around assignment used as
truth value.
(schedule_block): Likewise.
(regno_use_in): Likewise.
(schedule_insns): Remove unused variable `i'.
* toplev.c: Include <stdlib.h> and <string.h>/<strings.h>.
(v_message_with_decl): Remove unused variable `n'.
(botch): Explicitly declare parameter `s' as char *.
(main): Add parentheses around assignment used as truth value.
* tree.c (make_node): Protect the variable `kind' with the
GATHER_STATISTICS macro.
(real_value_from_int_cst): Move variable `e' inside conditional
macro area where it is used.
(tree_last): Add parentheses around assignment used as truth value.
(build1): Protect the variable `kind' with the GATHER_STATISTICS
macro.
(print_obstack_statistics): Reconcile format vs. args in fprintf.
Protect variables `i', `total_nodes', and `total_bytes' with the
GATHER_STATISTICS macro.
Lots more -W -Wall warnings disappear.
From-SVN: r17516
* combine.c (force_to_mode, nonzero_bits): Correctly optimize
constant offset computations from objects with known alignment in
the presence of STACK_BIAS.
From-SVN: r17405
* combine.c (try_combine): When setting elim_i2, check whether newi2pat
sets i2dest. When calling distribute_notes for i3dest_killed, pass
elim_i2 and elim_i1. When setting elim_i1, check if newi2pat
sets i1dest.
From-SVN: r16334
* combine.c (try_combine): Don't elim_i1 when it is used in i2src.
* combine.c (try_combine): When setting elim_i2, check whether newi2pat
sets i2dest. When calling distribute_notes for i3dest_killed, pass
elim_i2 and elim_i1.
Co-Authored-By: Jim Wilson <wilson@cygnus.com>
From-SVN: r16296
* Makefile.in (OBJS): Add alias.o
(alias.o): Add dependencies.
* alias.c: New file.
* sched.c: Remove alias analysis code. It lives in alias.c now.
(reg_last_uses_size): Declare.
(sched_analyze_2): Add new arguments to true_dependence.
(sched_analyze_insn): Use reg_last_uses_size instead of max_reg.
(schedule_block): Initialize reg_last_uses_size.
(schedule_insns): Always call init_alias_analysis.
* calls.c (expand_call): Note calls to malloc, calloc, and realloc;
mark return value from such functions as a pointer and keep track of
them for alias analysis. If a return value from a function is a
pointer, mark it as such.
* combine.c (distribute_notes): Handle REG_NOALIAS.
* cse.c (struct write_data): Delete. No longer needed.
(invalidate): Don't call set_nonvarying_address_components anymore.
Use true_dependence to decide if an entry should be removed from
the hash table.
(invalidate_memory): Remove WRITES argument, simplify appropriately.
Fix all callers.
(note_mem_written): Similarly for WRITE_PTR argument.
(invalidate_from_clobbers): Similarly for W argument.
(invalidate_for_call): Remove memory elements from the hash table.
(refers_to_mem_p, cse_rtx_addr_varies_p): Deleted.
(cse_rtx_varies_p): New function. Derived from old
cse_rtx_addr_varies_p.
(cse_insn): Remove WRITES_MEMORY and INIT variables and all references.
Don't call note_mem_written anymore. Stack pushes invalidate the stack
pointer if PUSH_ROUNDING is defined. No longer need to call
cse_rtx_addr_varies_p to decide if a MEM should be invalidated.
(skipped_writes_memory): Remove variable.
(invalidate_skipped_set): Simplify and wewrite to use invalidate_memory.
(invalidate_skipped_block): Simplify for new alias analysis code.
(cse_set_around_loop): Likewise.
(cse_main): Call init_alias_analysis.
* flags.h (flag_alias_check, flag_argument_noalias): Declare.
* toplev.c (flag_alias_check, flag_argument_noalias): Define.
(f_options): Add new alias checking arguments.
(main): Set flag_alias_check when optimizing.
* local_alloc (validate_equiv_mem_from_store): Add new arguments
to true_dependence.
(memref_referenced_p): Likewise.
* loop.c (NUM_STORES): Increase to 30.
(prescan_loop): Only non-constant calls set unknown_address_altered.
(invariant_p): Add new arguments to true_dependence.
(record_giv): Initialize unrolled and shared fields.
(emit_iv_add_mult): Call record_base_value as needed.
* loop.h (struct induction): Add unrolled and shared fields.
* unroll.c (unroll_loop): Call record_base_value as needed.
(copy_loop_body): Likewise.
(final_biv_value): Likewise.
(final_giv_value): Likewise.
(find_splittable_regs): Likewise. Only create one new pseudo
if we have multiple address GIVs that were combined with the same
dst_reg GIV. Note when a new register is created due to unrolling.
* rtl.c (reg_note_name): Add REG_NOALIAS.
* rtl.h (enum reg_note): Similarly.
(rtx_varies_p, may_trap_p, side_effects_p): Declare.
(volatile_refs_p, volatile_insn_p, remove_note): Likewise.
(note_stores, refers_to_regno_p, reg_overlap_mentioned_p): Likewise.
(true_dependence, read_dependence, anti_dependence): Likewise.
(output_dependence, init_alias_analysis, end_alias_analysis): Likewise.
(mark_user_reg, mark_reg_pointer): Likewise.
jfc's alias analysis code.
From-SVN: r14768
(simplify_rtx): Don't do anything with if_then_else_cond
result if both one arm and the input are a comparison.
(simplify_{rtx,if_then_else,logical,shift_const}): Don't
test STORE_FLAG_VALUE with #if; properly test for just sign bit.
(num_sign_bit_copies, if_then_else_cond): Likewise.
From-SVN: r13551
(find_split_point, case SET): If SET_SRC is NE and
STORE_FLAG_VALUE is -1, see if we can convert into NEG of shift.
(force_to_mode, case NE): Make condition stricter.
From-SVN: r13370
(MAX_UNDO): Deleted macro.
(struct undo): New field, next.
(struct undobuf): Deleted num_undos and undo.
New fields undos, frees, and previous_undos.
(SUBST, SUBST_INT): Rework to allocate memory and chain undo entries.
(combine_instructions): Initialize undobuf.{undos,previous_undos},
not undobuf.num_undo and previous_num_undos.
(try_combine): Likewise.
(undo_all, gen_rtx_combine): Rework to use new data structures.
From-SVN: r12372
(expand_field_assignment): Take SUBREG_WORD into account when have
STRICT_LOW_PART.
(make_extraction): Make a STRICT_LOW_PART at any low-order word.
From-SVN: r11775
(combine_instructions): In initial scan of insns, handle a REG_INC
note's affect on sign bit copies and nonzero bits.
(set_nonzero_bits_and_sign_copies): Treat a zero SET arg as a CLOBBER.
From-SVN: r11762
(make_field_assignment): Use it.
Expand compound operations on both sides of an IOR.
Properly adjust constand in IOR when computing bit position.
From-SVN: r10927
(set_nonzero_bits_and_sign_copies): Handle reg even
if only set once and in one basic block.
(nonzero_bits, case REG): Use REGNO_POINTER_ALIGN instead of
explicit alignment of registers pointing into frame.
From-SVN: r10870
* regclass.c (regclass): Use SECONDARY_RELOAD_CLASS if it's
defined to avoid useless work.
* combine.c (find_split_point): Try to split SET_DEST
just like we do for SET_SRC.
From-SVN: r10790
(try_combine): When checking for two sets of the same register in a
split insn, also test for setting a ZERO_EXTRACT, STRICT_LOW_PART, or
SUBREG.
From-SVN: r10783
(simplify_rtx): In code that attempts to simplify conditional
expressions, if the result is an NE around another comparison, return
the original expression.
From-SVN: r10428
(simplify_and_const_int): Sign-extend constants when they have the
most significant bit set for the target.
(merge_outer_ops): Likewise.
(simplify_shift_const): Likewise.
From-SVN: r9310
(INSN_CUID): Call abort if INSN is out of range.
(combine_instructions): Set max_uid_cuid. Set uid_cuid directly
instead of through INSN_CUID.
(get_last_value): Use prev_real_insn instead of prev_nonnote_insn.
Ignore USE insns generated by combine.
From-SVN: r9169
