2004-01-12 Kazu Hirata <kazu@cs.umass.edu>
PR optimization/12508.
* combine.c (try_combine): Remove a dead set in a parallel
even if its destination is a subreg.
Revert:
2003-06-03 Kazu Hirata <kazu@cs.umass.edu>
* combine.c (simplify_set): Don't move a subreg in SET_SRC to
SET_DEST if WORD_REGISTER_OPERATIONS is not defined.
From-SVN: r75747
* combine.c (distribute_notes): When re-distributing the notes from
an insn we are about to delete, ensure we can't end up with a cyclic
list of notes.
From-SVN: r73547
* Makefile.in (BUILD_RTL): Replace $(BUILD_PREFIX)insn-modes.o
with min-insn-modes.o.
(STAGESTUFF): Add min-insn-modes.c.
(genobjs): Add genmodes.o.
(print-rtl.o, print-rtl1.o): Depend on $(TM_P_H).
(insn-modes.o): Depend on $(TM_H) not $(GTM_H); also real.h.
(min-insn-modes.c, min-insn-modes.o): New rules.
(s-modes): Also generate min-insn-modes.c.
($(BUILD_PREFIX_1)insn-modes.o): Kill.
* genmodes.c (struct mode_data): Add format field.
(blank_mode, validate_mode, complete_mode): Update to match.
(make_scalar_mode): Separate into make_int_mode and make_float_mode.
(_SCALAR_MODE): Kill.
(FLOAT_MODE, FRACTIONAL_FLOAT_MODE): Add format argument.
(emit_insn_modes_c_header): Adjust.
(emit_min_insn_modes_c_header, emit_real_format_for_mode)
(emit_min_insn_modes_c): New functions.
(emit_insn_modes_c): Call emit_real_format_for_mode.
(main): Add -m option to generate min-insn-modes.c.
* machmode.h: Update documentation. Add format argument to
all uses of FLOAT_MODE.
* real.c: Don't define real_format_for_mode here.
* dwarfout.c: Move default definition of PRINT_REG...
* defaults.h: ...here.
* print-rtl.c: Include tm_p.h.
(DEBUG_PRINT_REG, DEBUG_REGISTER_NAMES, debug_reg_names, reg_names):
Kill.
(print_rtx): Use PRINT_REG, not DEBUG_PRINT_REG. But surround
this entire block with #ifndef GENERATOR_FILE.
* regclass.c: Unconditionally define reg_names.
* config/mips/mips.h, config/rs6000/rs6000.h, config/sh/sh.h
Don't define DEBUG_REGISTER_NAMES.
* config/rs6000/darwin.h: Don't use DEBUG_REGISTER_NAMES in
redefinition of REGISTER_NAMES.
* config/i386/i386.h: Don't define DEBUG_PRINT_REG.
* combine.c: Change all preprocessor conditionals on
EXTRA_CC_MODES to use SELECT_CC_MODE instead; rearrange a bit
for clarity.
* genopinit.c: Remove mention of EXTRA_CC_MODES in comment.
* configure.in: Don't define EXTRA_CC_MODES.
* configure, config.in: Regenerate.
* doc/tm.texi: Remove documentation of EXTRA_CC_MODES.
* config/arc/arc.c, config/m32r/m32r.c, config/sparc/sparc.c:
May assume that GET_MODE_CLASS is accurate for extra CC modes
at all times.
* config/i860/i860.h (INIT_CUMULATIVE_ARGS): Pass correct
number of arguments to aggregate_value_p.
* genmodes.c (RESET_FLOAT_FORMAT, reset_float_format): New.
* machmode.def: Explain ARCH-modes.def. Document
RESET_FLOAT_FORMAT. Improve commentary on various mode
clusters. Do not define OI, PQI, PHI, PSI, PDI, QF, HF, TQF,
XF, or TF modes here. Remove backward-compatibility
definition of CC.
* config/alpha/alpha-modes.def: New file; define TF mode.
* config/arc/arm-modes.def: Define XF mode.
* config/c4x/c4x-modes.def: Define QF and HF modes. Unset
float format for SF and DF modes.
* config/dsp16xx/dsp16xx-modes.def: New file; define HF mode.
* config/i386/i386-modes.def: Define XF and TF modes.
* config/i960/i960-modes.def: Define TF mode.
* config/ia64/ia64-modes.def: Define TF and OI modes.
* config/m68k/m68k-modes.def: New file; define XF mode.
* config/mips/mips-modes.def: New file; define TF mode, reset
formats for SF and DF modes.
* config/pa/pa-modes.def: Define TF mode.
* config/rs6000/rs6000.c: Define TF and PSI modes.
* config/s390/s390-modes.def: Define OI mode.
* config/sh/sh-modes.def: New file; define PSI mode.
* config/sparc/sparc-modes.def: Define TF mode.
* config/vax/vax-modes.def: New file; reset formats for SF and
DF modes.
* config/c4x/c4x.c (c4x_override_options): No need to mess
with real_format_for_mode or set REAL_MODE_FORMATs.
(c4x_immed_int_constant): Don't apply GET_MODE_CLASS to rtx
variable.
* config/i386/i386.c (override_options): No need to set
REAL_MODE_FORMATs here.
* config/i960/i960.c (i960_initialize): Likewise.
* config/m68k/m68k.c (m68k_override_options): Likewise.
* config/ia64/ia64.c (ia64_override_options): Set REAL_MODE_FORMAT
for TFmode only if not the default.
* config/mips/mips.c (override_options): Likewise.
* config/vax/vax.c (override_optionms): Set REAL_MODE_FORMAT for
DFmode only if not the default.
* config/i370/i370.h (RET_REG): Don't consider TFmode.
* config/m68hc11/m68hc11.c (print_operand): Don't consider XFmode.
* config/dsp16xx/dsp16xx.c (hard_regno_mode_ok): #if 0 out use
of modes that don't appear anywhere in the machine description.
* config/arc/arc-modes.def, config/arm/arm-modes.def
* config/c4x/c4x-modes.def, config/frv/frv-modes.def
* config/i386/i386-modes.def, config/i960/i960-modes.def
* config/ia64/ia64-modes.def, config/mmix/mmix-modes.def
* config/pa/pa-modes.def, config/pdp11/pdp11-modes.def
* config/rs6000/rs6000-modes.def, config/s390/s390-modes.def
* config/sparc/sparc-modes.def: Convert to new style for
declaring extra CC modes.
From-SVN: r72440
2003-10-06 Eric Botcazou <ebotcazou@libertysurf.fr>
PR optimization/11637
* combine.c (adjust_for_new_dest): New function to adjust the
notes and LOG_LINKS when the dest of an insn has changed.
(try_combine): Use it when deleting the first insn of a two-insn
parallel or splitting a two-load parallel.
From-SVN: r72138
* combine.c (combine_simplify_rtx): Move several NOT and NEG
optimizations from here...
* simplify-rtx.c (simplify_unary_operation): to here. Recursively
simplify expressions using simplify_gen_*ary instead of gen_rtx_*.
From-SVN: r71300
* targhooks.c: New file.
* targhooks.h: New file.
* Makefile.in: Add targhooks.o support.
(function.o): Depend on$(TARGET_H).
(stmt.o): Likewise.
(combine.o): Depend on $(TREE_H) and $(TARGET_H).
* builtins.c (apply_args_size, expand_builtin_apply_args_1,
expand_builtin_apply): Convert to calls.struct_value_rtx hook.
(expand_builtin_saveregs): Convert to
calls.expand_builtin_saveregs hook.
* c-decl.c (start_decl): Handle new calls.promote_prototypes hook
here, instead of ...
(get_parm_info) ... here.
(store_parm_decls_oldstyle): Convert to calls.promote_prototypes
hook.
(finish_function): Handle calls.promote_prototypes hook here too.
* c-typeck.c (convert_arguments): Convert to
calls.promote_prototypes hook.
(c_convert_parm_for_inlining): Likewise.
* calls.c (initialize_argument_information): Convert to
calls.promote_function_args hook.
(expand_call): Convert to calls.struct_value_rtx,
calls.strict_argument_naming,
calls.pretend_outgoing_varargs_named, and
calls.promote_function_return hooks. Pass fndecl to
aggregate_value_p. Initialize CUMULATIVE_ARGS before calling
hooks, so they can use that.
(emit_library_call_value_1): Likewise.
* combine.c (setup_incoming_promotions): Convert to
calls.promote_function_args hook.
* emit-rtl.c: Convert to calls.struct_value_rtx hook.
* expr.c (expand_assignment): Pass call to aggregate_value_p.
(expand_expr): Likewise.
* expr.h: Remove support for SETUP_INCOMING_VARARGS,
STRICT_ARGUMENT_NAMING, PRETEND_OUTGOING_VARARGS_NAMED,
RETURN_IN_MEMORY macro defaults.
* final.c (profile_function): Convert to calls.struct_value_rtx
hook.
* function.c (aggregate_value_p): Accept function type tree as
second parameter; try to deduce fntype from it. Convert to
calls.return_in_memory hook.
(assign_parms): Convert to calls.setup_incoming_varargs,
calls.strict_argument_naming, calls.promote_function_args,
calls.pretend_outgoing_varargs_named hooks. Pass fndecl to
aggregate_value_p.
(expand_function_start): Likewise. Convert to
calls.struct_value_rtx hook.
(expand_function_end): Convert to calls.promote_function_return hook.
(allocate_struct_function): Pass fndecl to aggregate_value_p.
* hard-reg-set.h: Update comments to new hook names.
* integrate.c (expand_inline_function): Pass fndecl to aggregate_value_p.
* reg-stack.c (stack_result): Likewise.
* rtl.h (struct_value_rtx, struct_value_incoming_rtx): Delete.
* stmt.c (expand_value_return): Convert to
calls.promote_function_return hook.
* target-def.h: Add TARGET_PROMOTE_FUNCTION_ARGS,
TARGET_PROMOTE_FUNCTION_RETURN, TARGET_PROMOTE_PROTOTYPES,
TARGET_STRUCT_VALUE_RTX, TARGET_RETURN_IN_MEMORY,
TARGET_EXPAND_BUILTIN_SAVEREGS, TARGET_SETUP_INCOMING_VARARGS,
TARGET_STRICT_ARGUMENT_NAMING,
TARGET_PRETEND_OUTGOING_VARARGS_NAMED, and TARGET_CALLS.
* target.h: Likewise.
* tree.h (aggregate_value_p): Also takes a tree to deduce function
attributes from (for target hooks).
* doc/tm.texi (PROMOTE_FUNCTION_ARGS, PROMOTE_FUNCTION_RETURN,
PROMOTE_PROTOTYPES, RETURN_IN_MEMORY, STRUCT_VALUE_REGNUM,
STRUCT_VALUE, STRUCT_VALUE_INCOMING_REGNUM, STRUCT_VALUE_INCOMING,
EXPAND_BUILTIN_SAVEREGS, SETUP_INCOMING_VARARGS,
STRICT_ARGUMENT_NAMING, PRETEND_OUTGOING_VARARGS_NAMED): Convert
to hooks.
* config/alpha/alpha.c (alpha_output_mi_thunk_osf): Pass function
to aggregate_value_p.
* config/arm/arm.c (arm_init_cumulative_args,
arm_output_mi_thunk): Likewise.
* config/i386/i386.c (ix86_return_pops_args, x86_this_parameter):
Likewise.
* config/mips/mips.c (mips_save_reg_p, mips_expand_prologue,
mips_can_use_return_insn): Likewise.
* config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
* config/s390/s390.c (s390_output_mi_thunk): Likewise.
* config/sparc/sparc.c (sparc_output_mi_thunk): Pass function to
aggregate_value_p.
* config/story16/stormy16.c (xstormy16_asm_output_mi_thunk): Pass
function to aggregate_value_p.
* objc/objc-act.c (generate_struct_by_value_array): Pass NULL to
aggregate_value_p.
* config/sh/sh-protos.h (sh_builtin_saveregs): Remove.
(sh_attr_renesas_p, sh_cfun_attr_renesas_p, sh_function_arg,
sh_function_arg_advance, sh_pass_in_reg_p): New. * config/sh/sh.c
(sh_handle_renesas_attribute, sh_promote_prototypes,
sh_struct_value_rtx, sh_return_in_memory, sh_builtin_saveregs,
sh_setup_incoming_varargs, sh_strict_argument_naming,
sh_pretend_outgoing_varargs_named): New decls.
(targetm): Add new hooks.
(calc_live_regs): Save MACL and MACH if the function has the
renesas attribute.
(sh_expand_prologue): Support renesas attribute.
(sh_builtin_saveregs): Make static.
(sh_build_va_list): Support renesas attribute.
(sh_va_start): Likewise.
(sh_va_arg): Likewise.
(sh_promote_prototypes): New.
(sh_function_arg): New, moved from sh.h. Support renesas
attribute.
(sh_function_arg_advance): Likewise.
(sh_return_in_memory): Likewise.
(sh_strict_argument_naming): Likewise.
(sh_pretend_outgoing_varargs_named): Likewise.
(sh_struct_value_rtx): New.
(sh_attribute): Add renesas attribute.
(sh_handle_renesas_attribute): New.
(sh_attr_renesas_p, sh_cfun_attr_renesas_p): New.
(sh_ms_bitfield_layout_p): Support renesas attribute also.
(sh_output_mi_thunk): Pass function to aggregate_value_p. *
config/sh/sh.h (TARGET_SWITCHES): Add -mrenesas as an alias for
-mhitachi.
(STRUCT_VALUE_REGNUM, STRUCT_VALUE, RETURN_IN_MEMORY): Moved to
target hooks.
(sh_args): Add renesas_abi flag.
(INIT_CUMULATIVE_ARGS): Set it. Pass fndecl to aggregate_value_p.
(FUNCTION_ARG_ADVANCE, FUNCTION_ARG): Move to sh.c.
(PASS_IN_REG_P): Support renesas attribute. Pass DF and TF on the
stack for the renesas abi.
(STRICT_ARGUMENT_NAMING, PRETEND_OUTGOING_VARARGS_NAMED,
SETUP_INCOMING_VARARGS, EXPAND_BUILTIN_SAVEREGS,
PROMOTE_PROTOTYPES): Moved to sh.c. * config/sh/sh.md (call): Set
call cookie to indicate renesas calls.
* decl.c (finish_function): Pass fndecl to aggregate_value_p.
* misc.c (default_pass_by_ref): Convert to calls.return_in_memory
hook.
From-SVN: r71048
* combine.c (gen_binary): Handle the CLOBBER rtx and
don't build a binary operation with it.
Co-Authored-By: Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
From-SVN: r69199
* combine.c (force_to_mode): Replace the equality comparison
of INTVALs with a pointer equality comparison.
(simplify_comparison): Likewise.
From-SVN: r68603
PR bootstrap/10983
* combine.c (make_extraction): Use gen_lowpart_for_combine
when extracting from a REG and not in the destination of a SET.
Co-Authored-By: Eric Botcazou <ebotcazou@libertysurf.fr>
From-SVN: r67916
2003-05-15 Eric Christopher <echristo@redhat.com>
* combine.c (expand_compound_operation): Make sure
that zero_extend operation is profitable.
From-SVN: r66853
2003-05-14 Eric Christopher <echristo@redhat.com>
* combine.c: Fix header comments.
(distribute_notes): Remove usage of elim_i1, elim_i2. Propagate
to all calls and prototype.
From-SVN: r66813
2003-03-31 Eric Christopher <echristo@redhat.com>
* combine.c (can_combine_p): Allow ZERO_EXTRACT and STRICT_LOW_PART.
(combinable_i3pat): Remove call to expand_field_assignment and
#if 0'd code.
From-SVN: r65118
PR target/10072
* combine.c (simplify_if_then_else): Check that the mode
has MODE_INT class before applying the (OP Z (mult COND C2))
transformation.
From-SVN: r64785
PR opt/2391
* combine.c: Fix spelling in comment.
(cached_nonzero_bits): New function.
(cached_num_sign_bit_copies): New function.
(nonzero_bits_with_known): New macro.
(num_sign_bit_copies_with_known): New macro.
(nonzero_bits1): Rename from nonzero_bits. Add three new
arguments. Change calls from nonzero_bits to
nonzero_bits_with_known.
(num_sign_bit_copies1): Rename from num_sign_bit_copies. Add
three new arguments. Change calls from num_sign_bit_copies to
num_sign_bit_copies_with_known.
(nonzero_bits): New macro.
(num_sign_bit_copies): New macro.
(update_table_tick): Don't traverse identical subexpression more
than once.
(get_last_value_validate): Likewise.
From-SVN: r62893
2002-12-02 Geoffrey Keating <geoffk@apple.com>
* combine.c (combine_simplify_rtx): Add new canonicalizations.
* doc/md.texi (Insn Canonicalizations): Document new
canonicalizations for multiply/add combinations.
* config/rs6000/rs6000.md: Add and modify floating add/multiply
patterns to ensure they're used whenever they can be.
Index: gcc/testsuite/ChangeLog
2002-12-02 Geoffrey Keating <geoffk@apple.com>
* gcc.dg/ppc-fmadd-1.c: New file.
* gcc.dg/ppc-fmadd-2.c: New file.
* gcc.dg/ppc-fmadd-3.c: New file.
From-SVN: r59841
* combine.c (force_to_mode): Only replace with (not Y) if all bits in fuller_mask
(not just mask) are set in C.
* gcc.c-torture/execute/20021118-3.c: New test.
From-SVN: r59295
* combine.c (try_combine): When split an instruction pair, where the
first has a sign_extend src, verify that the src and dest modes match.
From-SVN: r57371
fix subreg optimization bug introduced 2002-05-25
* combine.c (simplify_set): When optimizing a subreg src with a
cc0 dest, use GET_MODE (src) for mask instead of inner_mode.
From-SVN: r57323
* combine.c (try_combine): Handle the case that undobuf.other_insn
has been turned into a return or unconditional jump, by inserting
a BARRIER if necessary.
(simplify_set): Test if a condition code setter has a constant
comparison at compile time, if so convert this insn to a no-op move
and update/simplify the condition code user (undobuf.other_insn).
From-SVN: r56955
* machmode.h (SCALAR_INT_MODE_P): New macro to test for
scaler integer mode (MODE_INT or MODE_PARTIAL_INT).
* explow.c (trunc_int_for_mode): Abort when the mode is not
a scaler integer mode.
* combine.c (expand_compound_operation): Don't expand Vector
or Complex modes into shifts.
(expand_field_assignment): Don't do bitwise arithmatic and
shifts on Vector or Complex modes.
(simplify_comparison): Don't call trunc_int_for_mode
for VOIDmode.
* recog.c (general_operand): Likewise.
(immediate_operand): Likewise.
(nonmemory_operand): Likewise.
Co-Authored-By: Steve Ellcey <sje@cup.hp.com>
From-SVN: r56443
2002-08-01 Toon Moene <toon@moene.indiv.nluug.nl>
* c-common.c (cb_register_builtins): Set
__FINITE_MATH_ONLY__ to 1 if -ffinite-math-only
is given, and to 0 otherwise.
* combine.c (simplify_if_then_else): HONOR_NANS
implies FLOAT_MODE_P.
From-SVN: r55932
2002-07-30 Toon Moene <toon@moene.indiv.nluug.nl>
* flags.h: Declare flag_finite_math_only.
Use it in definition of HONOR_NANS and
HONOR_INFINITIES.
* c-common.c (cb_register_builtins): Emit
__FINITE_MATH_ONLY__ when flag_finite_math_only
is set.
* combine.c (simplify_if_then_else): If
flag_finite_math_only is set, a == b has a
definite value.
* toplev.c: Initialize flag_finite_math_only.
(set_flags_fast_math): Set it on -ffast-math.
(flag_fast_math_set_p): Test it.
doc:
* invoke.texi: Document -ffinite-math-only.
f:
* com.c (ffe_init_options): Set
flag_finite_math_only.
* invoke.texi: Document -fno-finite-math-only.
From-SVN: r55887
* combine.c (struct_undo): Change types of recorded substitutions
to be either "int" or "rtx", instead of "unsigned int" and "rtx".
(do_SUBST_INT): Change types of the substitution from unsigned int
to int, to avoid compilation warning from SUBST_INT's only caller.
(make_extraction): Add cast to avoid compilation warning.
(force_to_mode): Remove cast to avoid compilation warning.
From-SVN: r55221
* combine.c (combine_simplify_rtx): Pass the mode of the
shift count, not the shift operation when trying to simplify
a shift on a SHIFT_COUNT_TRUNCATED target.
From-SVN: r55085
2002-06-05 David S. Miller <davem@redhat.com>
Delete SEQUENCE rtl usage outside of reorg and ssa passes.
* rtl.h (gen_sequence, emit_insns, emit_insns_before,
emit_insns_before_scope, emit_insns_after,
emit_insns_after_scope): Delete declaration.
* ada/misc.c (insert_code_for): Use emit_insn* instead of
emit_insns_foo.
* config/alpha/alpha.c (alpha_set_memflags_1): Abort on SEQUENCE.
(alpha_set_memflags): Fix comment.
(set_frame_related_p): Use get_insns instead of gen_sequence.
* config/alpha/alpha.md (setjmp receiver splitter): Avoid
emitting no insns.
* config/arm/arm.c (arm_finalize_pic): Use get_insns instead of
gen_sequence.
(arm_gen_load_multiple, arm_gen_store_multiple): Likewise.
* config/fr30/fr30.c (fr30_move_double): Likewise.
* config/i386/i386.c (ix86_expand_int_movcc, ix86_expand_movstr):
Likewise.
* config/ia64/ia64.c (spill_restore_mem): Likewise.
* config/ia64/ia64.md (conditional move spliiter): Avoid emitting
no insns.
* config/m32r/m32r.c (gen_split_move_double): Use get_insns
instead of gen_sequence.
* config/mips/mips.c (embedded_pic_fnaddr_reg): Likewise.
(mips_expand_prologue, mips16_gp_pseudo_reg): Likewise.
* config/sh/sh.c (sh_need_epilogue): Likewise.
* config/sparc/sparc.md (current_function_calls_alloca, flat): New
attributes.
(setjmp pattern and split): Use them to avoid splitter which emits
no RTL.
* genattrtab.c (main): Emit include of function.h
* config/stormy16/stormy16.c (xstormy16_split_cbranch): Use
get_insns instead of gen_sequence.
* config/cris/cris.c (cris_split_movdx): Likewise.
* emit-rtl.c (emit_insns*): Kill.
(try_split): Expect insn list instead of SEQUENCE.
(make_jump_insn_raw, make_call_insn_raw): Fix comments.
(emit_*insn*): Reimplement to work with INSN lists and PATTERNs.
Make them abort if a SEQUENCE is given and RTL checking is
enabled.
(emit_*_scope): Don't forget to set scope on final insn.
(gen_sequence): Move from here...
* ssa.c (gen_sequence): To here as private function.
* builtins.c (expand_builtin_apply_args): Use emit_insn_foo, fix
comments.
(expand_builtin_return, expand_builtin_mathfn): Likewise.
(expand_builtin_strlen): Use get_insns instead of gen_sequence.
(expand_builtin_saveregs): Use emit_insn_foo, fix comments.
(expand_builtin_expect_jump): Use get_insns and fix comments.
* calls.c (try_to_integrate): Use emit_insn_foo.
(expand_call, emit_library_call_value_1): Likewise.
* expr.c (emit_queue): Handle insn lists instead of SEQUENCE.
(emit_move_insn_1): Use get_insns instead of gen_sequence.
(expand_expr): Use emit_insn_foo.
* cfgrtl.c (commit_one_edge_insertion): Use emit_insn_foo.
* except.c (build_post_landing_pads): Likewise.
* flow.c (attempt_auto_inc): Likewise.
* stmt.c (expand_fixup, fixup_gotos, expand_nl_handler_label,
expand_nl_goto_receivers, expand_decl_cleanup): Likewise.
* function.c (fixup_var_refs_insn): Use get_insns instead of
gen_sequence.
(fixup_var_refs_1): Likewise and expect insn list from gen_foo.
(fixup_memory_subreg): Use get_insns instead of gen_sequence.
(fixup_stack_1, purge_addressof_1, expand_main_function,
get_arg_pointer_save_area): Likewise.
(optimize_bit_field, instantiate_virtual_regs_1, assign_parms,
expand_function_end): Use emit_insn_foo.
(record_insns, keep_stack_depressed): Work with insn list instead
of SEQUENCE, fix comments.
* ifcvt.c (noce_emit_store_flag, noce_try_store_flag,
noce_try_store_flag_constants, noce_try_store_flag_inc,
noce_try_store_flag_mask, noce_emit_cmove, noce_try_cmove_arith,
noce_try_minmax, noce_try_abs): Use emit_insn_foo.
(noce_process_if_block): Use get_insns instead of gen_sequence.
* optabs.c (add_equal_note): Work with insn list, fix comments.
(expand_binop): Expect insn list from GEN_FCN(), use emit_insn_foo.
(expand_unop, expand_complex_abs, expand_unop_insn,
expand_no_conflict_block): Likewise.
(gen_move_insn): Use get_insns instead of gen_sequence.
(gen_cond_trap): Likewise.
* integrate.c (copy_rtx_and_substitute): Likewise.
(emit_initial_value_sets): Use emit_insn_foo.
* reload1.c (emit_output_reload_insns, emit_reload_insns): Likewise.
(fixup_abnormal_edges): Avoid losing REG_NOTES more intelligently
now that RTL generators give insn lists.
* sibcall.c (replace_call_placeholder): Use emit_insn_foo.
* doloop.c (doloop_modify, doloop_modify_runtime): Use get_insns
instead of gen_sequence.
(doloop_optimize): Work with insn lists instead of SEQUENCE rtl.
* explow.c (emit_stack_save, emit_stack_restore): Use get_insns
instead of gen_sequence.
* loop.c (move_movables, emit_prefetch_instructions,
gen_add_mult, check_dbra_loop, gen_load_of_final_value):
Likewise.
(loop_regs_update): Work with insn list instead of SEQUENCE rtl.
(product_cheap_p): Likewise, and add commentary about RTL wastage
here.
* lcm.c (optimize_mode_switching): Use get_insns instead of
gen_sequence.
* profile.c (gen_edge_profiler): Likewise.
* regmove.c (copy_src_to_dest): Likewise.
* reg-stack.c (compensate_edge): Likewise and fix comment.
* gcse.c (process_insert_insn): Likewise.
(insert_insn_end_bb): Work with insn list instead of SEQUENCE rtl.
* jump.c (delete_prior_computation): Update comment.
* genemit.c (gen_expand, gen_split, main): Use get_insns instead
of gen_sequence, update comments to match.
* recog.c (peephole2_optimize): Work with insn lists instead of
SEQUENCE rtl.
* sched-vis.c (print_pattern): Abort on SEQUENCE.
* unroll.c (unroll_loop, find_splittable_givs, final_giv_value):
Use get_insns instead of gen_sequence.
(copy_loop_body): Likewise and don't emit dummy NOTE.
* genrecog.c: Don't mention SEQUENCE rtl in comments.
* combine.c (try_combine): Expect insn lists from split generator.
* reorg.c (relax_delay_slots): Emit SEQUENCE into insn list by
hand.
From-SVN: r54497
* emit-rtl.c (global_rtl): Update comment.
(const_double_htab, const_double_htab_hash,
const_double_htab_hash, lookup_const_double): New.
(const_int_htab_hash, const_int_htab_eq): Remove const
qualifiers, which cause tons of warnings with RTL checking on.
(gen_rtx_CONST_DOUBLE): Deleted.
(const_double_from_real_value): New function - bears some
resemblance to the former immed_real_const_1.
(immed_double_const): Moved here from varasm.c and
simplified.
(gen_rtx_REG): Make REGNO unsigned to squelch warnings.
(gen_rtx_SUBREG): Use gen_rtx_raw_SUBREG.
(gen_rtx): Use immed_double_const.
(init_emit_once): Initialize the const_double_htab. Use
REAL_VALUE_FROM_INT where possible. Can now use
CONST_DOUBLE_FROM_REAL_VALUE when setting up const_tiny_rtx.
* varasm.c (struct varasm_status): Remove x_const_double_chain.
(const_double_chain, immed_real_const, clear_const_double_mem): Delete.
(immed_double_const, immed_real_const_1): Moved to emit-rtl.c.
(init_varasm_status, mark_varasm_status): Don't touch
x_const_double_chain.
* output.h: Delete prototype for clear_const_double_mem.
* real.h: Make REAL_VALUE_TYPE a macro again. Remove leading
'0' slot from all CONST_DOUBLE_FORMAT definitions. Prototype
const_double_from_real_value, not immed_real_const_1, and use
it to define CONST_DOUBLE_FROM_REAL_VALUE. Define new macro
CONST_DOUBLE_ATOF.
* rtl.h (CONST_DOUBLE_CHAIN): Kill.
(CONST_DOUBLE_LOW, CONST_DOUBLE_HIGH): Adjust.
(gen_rtx_CONST_DOUBLE, immed_real_const): Delete prototypes.
(gen_rtx_REG): Second arg is unsigned.
* gengenrtl.c (special_rtx): Take out CONST_DOUBLE.
(excluded_rtx): New, return true for CONST_DOUBLE.
(genmacro): Write nothing for excluded codes.
* combine.c (combine_simplify_rtx): Use CONST_DOUBLE_FROM_REAL_VALUE.
* expr.c (expand_expr): Likewise.
* ggc-common.c (ggc_mark_rtx_children_1): Don't mark the
CONST_DOUBLE_CHAIN.
* toplev.c (rest_of_compilation): Don't call
clear_const_double_mem.
* config/rs6000/rs6000.c (rs6000_float_const): Delete.
(rs6000_hash_constant): Remove CONST_DOUBLE special case.
(toc_hash_eq): Remove CONST_DOUBLE and LABEL_REF special cases.
* config/rs6000/rs6000-protos.h: Don't prototype rs6000_float_const.
* config/c4x/c4x.md, config/rs6000/rs6000.md: Use CONST_DOUBLE_ATOF.
* config/dsp16xx/dsp16xx.md, config/mips/mips.md,
config/pa/pa.md: Use CONST_DOUBLE_FROM_REAL_VALUE.
* config/sparc/sparc.md, config/sparc/sparc.c: Use immed_double_const.
From-SVN: r53409
* combine.c (simplify_comparison): Avoid narrowing a comparison
with a paradoxical subreg when doing so would drop signficant bits.
Co-Authored-By: Hans-Peter Nilsson <hp@bitrange.com>
From-SVN: r51785
PR optimization/6086
* combine.c (combine_simplify_rtx): If simplify_rtx failed because
of SUBREG of volatile MEM or because the MEM was mode dependent,
return CLOBBER instead of unmodified SUBREG.
From-SVN: r51606
* combine.c (set_nonzero_bits_and_sign_copies): Don't call
nonzero_bits if not needed.
(nonzero_bits) [XOR]: Likewise.
(nonzero_bits) [REG]: Use reg_last_set_nonzero_bits even if
reg_last_set_mode and mode are both MODE_INT, but not equal.
(record_value_for_reg): Compute reg_last_set_nonzero_bits
in nonzero_bits_mode for MODE_INT modes.
From-SVN: r51551
* cfgrtl.c (purge_dead_edges): Set BB_DRITY flags if edge has been
removed; fix return value.
* combine.c (combine_instructions): Dirtify blocks where we failed to
update liveness; purge dead edges; use update_life_info_in_dirty_blocks.
* toplev.c (rest_of_compilation): Do not purge_dead_edges after combine.
From-SVN: r50454
* defaults.h (MODE_HAS_NANS, MODE_HAS_INFINITIES): New.
(MODE_HAS_SIGNED_ZEROS, MODE_HAS_SIGN_DEPENDENT_ROUNDING): New.
* flags.h (HONOR_NANS, HONOR_INFINITIES, HONOR_SIGNED_ZEROS): New.
(HONOR_SIGN_DEPENDENT_ROUNDING): New.
* builtins.c (expand_builtin_mathfn): Use HONOR_NANS.
* c-common.c (truthvalue_conversion): Reduce x - y != 0 to x != y
unless x and y could be infinite.
(expand_unordered_cmp): New, mostly split from expand_tree_builtin.
Check that the common type of both arguments is a real, even for
targets without unordered comparisons. Allow an integer argument
to be compared against a real.
(expand_tree_builtin): Use expand_unordered_cmp.
* combine.c (combine_simplify_rtx): Use the new HONOR_... macros.
* cse.c (fold_rtx): Likewise. Fix indentation.
* fold-const.c (fold_real_zero_addition_p): New.
(fold): Use it, and the new HONOR_... macros.
* ifcvt.c (noce_try_minmax): Use the new HONOR_... macros.
* jump.c (reversed_comparison_code_parts): After searching for
the true comparison mode, use HONOR_NANS to decide whether it
can be safely reversed.
(reverse_condition_maybe_unordered): Remove IEEE check.
* simplify-rtx.c (simplify_binary_operation): Use the new macros
to decide which simplifications are valid. Allow the following
simplifications for IEEE: (-a + b) to (b - a), (a + -b) to (a - b),
and (a - -b) to (a + b).
(simplify_relational_operation): Use HONOR_NANS.
* doc/tm.texi: Document the MODE_HAS_... macros.
From-SVN: r50401
* doc/rtl.texi (SUBREG_PROMOTED_UNSIGNED_P): Change definition
to take ptr_extend into account as third type of extension.
(SUBREG_PROMOTED_UNSIGNED_SET): Definition of new macro to set bit
fields used by SUBREG_PROMOTED_UNSIGNED_P.
* rtl.h (SUBREG_PROMOTED_UNSIGNED_SET): New macro.
(SUBREG_PROMOTED_UNSIGNED_P): Change to return -1 as well as 0 or 1.
* calls.c (precompute_arguments): Use new macro.
(expand_call): Ditto.
* combine.c (nonzero_bits): Ditto.
(record_promoted_value): Ditto.
* expr.c (store_expr): Ditto.
(expand_expr): Ditto.
* function.c (assign_parms): Ditto.
From-SVN: r50174
* combine.c (do_SUBST): Sanity check substitutions of
CONST_INTs, and reject them in SUBREGs and ZERO_EXTENDs.
(subst): Simplify SUBREG or ZERO_EXTEND instead of SUBSTing a
CONST_INT into its operand.
(known_cond): Likewise, for ZERO_EXTEND.
* simplify-rtx.c (simplify_unary_operation): Fix condition to
allow for simplification of wide modes. Reject CONST_INTs in
ZERO_EXTEND when their actual mode is not given.
From-SVN: r49920
* combine.c (nonzero_bits): If using reg_nonzero_bits,
we don't know anything about bits outside of X mode.
(num_sign_bit_copies): Likewise.
From-SVN: r48239
* basic-block.h (free_bb_for_insn): Declare.
* bb-reorder.c (label_for_bb): Use block_label.
(emit_jump_to_block_after): Remove.
(insert_intra_1): Do not update block_for_insn.
(insert_inter_bb_scope_notes): Likewise; update bb->end
* cfg.c (free_bb_for_insn): New.
(try_rediret_by_replacing_jump): Avoid set_block_for_new_insns call.
(force_nonfallthru_and_redirect): Likewise; do not update BB boundaries.
(commit_one_edge_insertion): Likewise.
(commit_one_edge_insertion): Do not update BB boundary.
(commit_edge_insertions): Do not call compute_bb_for_insn.
* cfgbuild.c (find_basic_blocks): Do not free basic_block_for_insn.
* cfgcleanup.c (merge_blocks_move_predecessor): Use reorder_insns_nobb.
(merge_blocks_move_successor_nojumps): Likewise.
(try_crossjump_to_edge): Do not update block_for_insn.
* combine.c (combine_instructions): Remove compute_bb_for_insn call.
* df.c (df_pattern_emit_later): Do not update BB boundary.
(df_jump_pattern_emit_after): Likewise.
(df_insn_move_before): Use emit_insn_before.
* emit-rtl.c (try_split): Emit after trial to get bb boundary updated
properly.
(add_insn_after, add_insn_before, emit_insns_after): Update BB
boundaries and basic_block_for_insn.
(reorder_insns_nobb): Rename from reorder_insns.
(reorder_insns): New.
(emit_block_insn_before, emit_block_insn_after): Kill.
* flow.c (check_function_return_warnings): Do not call
compute_bb_for_insn; Do not free basic_block_for_insn.
(attempt_auto_inc): Do not update basic_block_for_insn.
* function.c (emit_return_into_block): Likewise;
do not update BB boundaries.
* gcse.c (handle_avail_expr): Do not update basic_block_for_insn.
(insert_insn_end_bb): Use emit_insn_before; Likewise.
(pre_insert_copy_insn): Likewise.
(update_ld_motion_notes): Likewise.
(insert_insn_start_bb): Likewise.
(replace_store_insn): Likewise.
* ifcvt.c (noce_process_if_block): Likewise.
(if_convert): Do not call compute_bb_for_insn.
* lcm.c (optimize_mode_switching): Do not update BB boundaries.
Use emit_insn_before and emit_insn_after.
* recog.c (split_all_insns): Do not update BB boundaries;
Do not call compute_bb_for_insn.
(peephole2_optimize): Do not update BB boundaries.
* reg-stack.c (emit_pop_insn): Use emit_insn_after and
emit_insn_before.
(emit_swap_insn): Likewise.
(convert_regs_1): Likewise.
* reload1.c (reload): Call compute_bb_for_insn.
* rtl.h (reorder_insns_nobb): Declare.
* ssa.c (rename_equivalent_regs): Use emit_insn_before.
* toplev.c (rest_of_compilation): Call free_bb_for_insn
at places CFG is invalidated; do not call compute_bb_for_insn.
* cfg.c (expunge_block): Invalidate BB structure.
* (merge_blocks_nomove): Update properly BLOCK_FOR_INSN
array.
* cfg.c (verify_flow_info): Verify the basic_block_for_insn array.
From-SVN: r45647
* combine.c (combine_simplify_rtx): Don't reverse condition
if there is no reverse for the condition.
(simplify_comparison): Don't simplify subregs from INT to FP.
* gcc.c-torture/execute/ieee/fp-cmp-4.c (main): Make "data" static.
* gcc.c-torture/execute/ieee/fp-cmp-5.c: New.
From-SVN: r45220
* expmed.c (mode_for_extraction): New function.
(store_bit_field, extract_bit_field): Use it.
* expr.h: Prototype it and provide an enum for its first argument.
* combine.c, function.c, recog.c: Don't include insn-codes.h.
Use mode_for_extraction rather than testing HAVE_insv/extv/extzv
and digging through the insn_data tables.
* Makefile.in: Update dependencies.
From-SVN: r45086
* optabs.h (OTI_flodiv, flodiv_optab): Kill.
* genopinit.c: Put floating point divide insns in sdiv_optab.
* expr.c (expand_expr): Use sdiv_optab, not flodiv_optab.
* config/gofast.h, config/c4x/c4x.h,
config/ia64/hpux_longdouble.h, config/mips/mips.h,
config/pa/long_double.h, config/rs6000/sysv4.h,
config/sparc/sparc.h: Put floating point divide libcalls in sdiv_optab.
* optabs.c (init_optab): Break into new_optab, init_optab, init_optabv.
(init_optabs): Use init_optabv for overflow-trapping optabs.
Don't init flodiv_optab. Give mov_optab, movstrict_optab, and
cmp_optab RTX codes so have_insn_for can find them.
* optabs.c (expand_simple_binop, expand_simple_unop,
have_insn_for, gen_sub3_insn): New interfaces.
* expr.h: Prototype new functions.
(enum optab_methods): Move here from optabs.h.
* builtins.c, combine.c, doloop.c, function.c, ifcvt.c,
loop.c, profile.c, simplify-rtx.c, stmt.c, unroll.c:
Use new functions instead of working directly with optabs.
* doloop.c, ifcvt.c, loop.c, profile.c, simplify-rtx.c,
unroll.c: Don't include optabs.h.
* caller-save.c, combine.c, function.c, stmt.c: Just include
insn-codes.h, not optabs.h.
* Makefile.in: Update dependencies.
* combine.c (make_compound_operation, simplify_comparison):
Fix typos testing for this or that instruction.
From-SVN: r45008
* expr.h: Split out optab- and libfunc-related code to...
* optabs.h, libfuncs.h: ... these new headers.
* Makefile.in (CONFIG_H, EXPR_H): Take out insn-codes.h.
(OPTABS_H): New.
(various .o rules): Add $(OPTABS_H) and/or libfuncs.h to
dependencies.
* mkconfig.sh: Don't include insn-codes.h from config.h.
* reload.h: Use #ifdef GCC_INSN_CODES_H to decide whether
enum insn_code is available. Move reload_in_optab and
reload_out_optab array declarations to optabs.h.
* regmove.c (gen_add3_insn): Move to optabs.c, export from
there, prototype in expr.h.
* gencodes.c: Cleanup: zap global variables, don't use
printf where puts will do, don't bother defining MAX_INSN_CODE
which nothing uses, let CODE_FOR_nothing get its value implicitly.
* genemit.c, genopinit.c: Include optabs.h in generated file.
* genoutput.c: Include insn-codes.h in generated file.
* builtins.c, caller-save.c, combine.c, doloop.c, explow.c,
expmed.c, expr.c, function.c, ifcvt.c, loop.c, optabs.c, profile.c,
reload1.c, simplify-rtx.c, stmt.c, unroll.c, config/alpha/alpha.c,
config/arm/arm.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/i386/i386.c, config/ia64/ia64.c, config/mn10300/mn10300.c,
config/pj/pj.c, config/sh/sh.c, config/sparc/sparc.c:
Include optabs.h.
* builtins.c, calls.c, dwarf2out.c, except.c, expr.c, function.c,
optabs.c, stmt.c, config/c4x/c4x.c, config/clipper/clipper.c,
config/m88k/m88k.c, config/sparc/sparc.c:
Include libfuncs.h.
* reload.c: Include expr.h and optabs.h before reload.h.
* config/alpha/alpha.c: Include tree.h before reload.h.
* config/pa/pa.c: Include expr.h, optabs.h, libfuncs.h,
and reload.h in that order.
* config/sparc/sparc.c: Include debug.h.
* recog.c: Include insn-codes.h.
cp:
* Make-lang.in (cp/except.o): Add libfuncs.h to dependencies.
* except.c: Include libfuncs.h.
java:
* Make-lang.in (java/decl.o): Update dependencies.
* decl.c: Include libfuncs.h, don't include toplev.h.
From-SVN: r44858
* combine.c (recog_for_combine): Use the fake recog
only if instruction does not match.
* rtl.h (NOOP_MOVE_INSN_CODE): New.
* rtlanal.c (noop_move_p): Always return 1 for NOOP_MOVE_INSN_CODE.
* combine.c (try_combine): Discover noop jump as direct jump.
From-SVN: r44464
* basic-block.h (find_sub_basic_block): Declare.
* flow.c (make_edges): New arguments MIN and MAX;
(find_sub_basic_blocks): Revamp to use make_edges
and purge_dead_edges.
(find_basic_blocks): Update call of find_sub_basic_block.
* recog.c (split_all_insns): Always expect CFG to be consistent;
call find_sub_basic_blocks in case something has changed.
* toplev.c (rest_of_compilation): Always call split_all_insns once CFG
has been built.
* basic-block.h (delete_noop_moves): Declare.
* combine.c (combine_instructions): Call it.
(recog_for_combine): Tolerate noop moves
(distribute_notes): Force refresh when register dies at noop move.
* flow.c (delete_noop_moves): Use BB structure; delete JUMP insns
too.
(life_analysis): Update delete_noop_moves call.
(set_noop_p): Move too ...
* rtlanal.c (noop_move_p): ... here.
* rtl.h (noop_move_p): Declare.
* basic-block.h (purge_all_dead_edges, purge_dead_edges): New functions.
* toplev.c (rest_of_compilation): Conditionally call purge_all_dead_edges
after combine.
* gcse.c (cprop_cc0_jump, cprop_insn): New argument "basic_block".
(cprop_jump): Likewise; call purge_dead_edges if substitution suceeded.
From-SVN: r44267
* optabs.c (can_extend_p) Check HAVE_ptr_extend for a specialized
pointer extension instruction.
* combine.c (nonzero_bits,num_sign_bit_copies) Likewise.
* simplify-rtx.c (simplify_unary_operation) Likewise.
* explow.c (convert_memory_address) Check value of
POINTERS_EXTEND_UNSIGNED to avoid some conversions when
less than zero.
* config/ia64/t-hpux (LIBGCC, INSTALL_LIBGCC, MULTILIB_OPTIONS,
MULTILIB_DIRNAMES, MULTILIB_MATCHES) Add multilib support.
* config/ia64/hpux.h (CPP_SPEC, ASM_SPEC, SUBTARGET_SWITCHES)
Add Multilib Support.
(POINTERS_EXTEND_UNSIGNED) Define for ILP32 support.
* config/ia64/ia64.h (MASK_ILP32, TARGET_ILP32, SUBTARGET_SWITCHES)
Add Multilib Support.
(POINTER_SIZE, LONG_TYPE_SIZE, MAX_LONG_TYPE_SIZE) Modify for ILP32
support.
* config/ia64/ia64.c (rtx_needs_barrier) Add support for addp4.
* config/ia64/ia64.md (ptr_extend) New instruction to "swizzle"
a 32 bit HP-UX pointer into a 64 bit HP-UX pointer.
From-SVN: r44166
2001-07-18 Toon Moene <toon@moene.indiv.nluug.nl>
* combine.c (combine_simplify_rtx): DIV can be treated
associatively for floats if unsafe math optimisations are enabled.
From-SVN: r44097
* combine.c (combine_simplify_rtx): Attempt to simplify
a*(b/c) as (a*b)/c for floats in unsafe_math mode.
* simplify-rtx.c (avoid_constatn_pool_reference): New static function.
(simplify_binary_operation, simplify_unary_operation,
simplify_relational_operation): Use it.
* combine.c (combine_simplify_rtx): Don't do associative law
on divisions; allow associative law on floats.
From-SVN: r44073
* gcov.c (output_data): Use HOST_WIDEST_INT_PRINT_DEC to output
variables of type HOST_WIDEST_INT.
* libgcc2.c (__bb_exit_func): Handle gcov_type as long long.
(__bb_exit_func): Correct type of count_max to avoid overflow.
(num_digits): Handle long long argument.
* combine.c (gen_lowpart_for_combine): Remove unused variable.
From-SVN: r44033
2001-07-06 Diego Novillo <dnovillo@redhat.com>
* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
call to simplify_binary_operation returns a new pattern.
From-SVN: r43826
* predict.def: New file.
* predict.h: New file.
* predict.c: Include predict.h.
(predictor_info): New structure and array.
(predict_edge, predict_insn): Rewrite; make global.
(predict_edge_def, predict_insn_def): New global functions.
(dump_prediction, combine_predictions_for_insns): New
static functions.
(estimate_probability): Change calls to predict_edge
to predict_edge_def and calls to predict_insn to predict_insn_def;
combine probabilities.
(expected_value_to_br_prob): Behave as predictor.
* rtl.h (REG_BR_PRED): Update coment.
(invert_br_probabilities): New.
* jump.c: Include predict.h
(duplicate_loop_exit_test): Drop branch prediction notes.
(invert_jump): Use invert_br_probabilities.
* Makefile.in: Add dependancy on predict.h for jump and predict pass.
* ifcvt.c (dead_or_predicable): Use invert_br_probabilities.
* combine.c (distribute_notes): Handle BR_PRED.
From-SVN: r43115
* rtlanal.c (operand_preference): Fix preference for objects.
* gcse.c (handle_avail_expr): Be prepared to handle single_set
parallels.
* combine.c (if_then_else_cond): Use simplify_subreg instead
of operand_subword.
* integreate.c (sub_constants): Likewise.
* emit-rtl.c (constant_subword): Deprecate; remove most of code
and use simplify_gen_subreg.
Mon Jun 4 19:55:23 CEST 2001 Lars Brinkhoff <lars@nocrew.org>
* sibcall.c (skip_copy_to_return_value): recognize the situation
when the called function's return value is copied into an
intermediate pseudo, and then into the calling functions return
value register.
From-SVN: r42864
* simplify_rtx.c (simplify_subreg): Keep subregs on return values,
check CLASS_CANNOT_CHANGE_MODE before avoiding subreg on hard reg,
in case register wasn't OK previously, accept it now; allow
subregs of frame pointer if reload completed and frame pointer
is not needed.
* combine.c (sombine_simplify_rtx): Fix comment;
use subreg_lowpart_offset instead of subreg_lowpart_p
(gen_lowpart_for_combine): Use subreg_lowpart_offset.
* rtl.h (subreg_lowpart_parts_p): Kill.
(subreg_lowpart_offset, subreg_highpart_offset): Declare.
* simplify-rtx.c (simplify_subreg): Use subreg_lowpart_offset.
* emit-rtl.c (gen_lowpart_SUBREG): Use subreg_lowpart_offset;
(gen_lowpart_common): Likewise.
(subreg_lowpart_p): Likewise.
(subreg_lowpart_parts_p): Kill.
(subreg_lowpart_offset, subreg_highpart_offset): New function.
* emit-rtl.c (gen_lowpart_common): Use simplify_gen_subreg
to simplify SUBREG and REG.
(gen_highpart): Use simplify_gen_subreg for all simplifications.
* emit-rtl.c (gen_realpart, gen_imagpart): Do not handle
CONCAT specially.
* rtlanal.c (replace_regs): Use simplify_gen_subreg
From-SVN: r42850
