2007-11-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31608
* trans-array.c (gfc_conv_expr_descriptor): Remove exception
for indirect references in the call to gfc_trans_scalar_assign.
* trans-expr.c (gfc_conv_string_parameter): Instead of asserting
that the expression is not an indirect reference, cast it to a
pointer type of the length given by se->string_length.
2007-11-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31608
* gfortran.dg/char_cast_2.f90: New test based on achar_4.f90.
From-SVN: r130271
2007-11-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/33986
* trans-array.c (gfc_conv_array_parameter ): Allow allocatable
function results.
2007-11-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/33986
* gfortran.dg/allocatable_function_3.f90.
From-SVN: r130228
2007-10-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31217
PR fortran/33811
PR fortran/33686
* trans-array.c (gfc_conv_loop_setup): Send a complete type to
gfc_trans_create_temp_array if the temporary is character.
* trans-stmt.c (gfc_trans_assign_need_temp): Do likewise for
allocate_temp_for_forall_nest.
(forall_replace): New function.
(forall_replace_symtree): New function.
(forall_restore): New function.
(forall_restore_symtree): New function.
(forall_make_variable_temp): New function.
(check_forall_dependencies): New function.
(cleanup_forall_symtrees): New function.
gfc_trans_forall_1): Add and initialize pre and post blocks.
Call check_forall_dependencies to check for all dependencies
and either trigger second forall block to copy temporary or
copy lval, outside the forall construct and replace all
dependent references. After assignment clean-up and coalesce
the blocks at the end of the function.
* gfortran.h : Add prototypes for gfc_traverse_expr and
find_forall_index.
expr.c (gfc_traverse_expr): New function to traverse expression
and visit all subexpressions, under control of a logical flag,
a symbol and an integer pointer. The slave function is caller
defined and is only called on EXPR_VARIABLE.
(expr_set_symbols_referenced): Called by above to set symbols
referenced.
(gfc_expr_set_symbols_referenced): Rework of this function to
use two new functions above.
* resolve.c (find_forall_index): Rework with gfc_traverse_expr,
using forall_index.
(forall_index): New function used by previous.
* dependency.c (gfc_check_dependency): Use gfc_dep_resolver for
all references, not just REF_ARRAY.
(gfc_dep_resolver): Correct the logic for substrings so that
overlapping arrays are handled correctly.
2007-10-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31217
PR fortran/33811
* gfortran.dg/forall_12.f90: New test.
PR fortran/33686
* gfortran.dg/forall_13.f90: New test.
From-SVN: r129720
2007-10-20 Paul Thomas <pault@gcc.gnu.org>
FX Coudert <fxcoudert@gcc.gnu.org>
PR fortran/31608
* trans-array.c (gfc_conv_expr_descriptor): For all except
indirect references, use gfc_trans_scalar_assign instead of
gfc_add_modify_expr.
* iresolve.c (check_charlen_present): Separate creation of cl
if necessary and add code to treat an EXPR_ARRAY.
(gfc_resolve_char_achar): New function.
(gfc_resolve_achar, gfc_resolve_char): Call it.
(gfc_resolve_transfer): If the MOLD expression does not have a
character length expression, get it from a constant length.
2007-10-20 Paul Thomas <pault@gcc.gnu.org>
FX Coudert <fxcoudert@gcc.gnu.org>
PR fortran/31608
* gfortran.dg/char_cast_1.f90: New test.
Co-Authored-By: Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
From-SVN: r129505
PR fortran/31119
* trans-array.c (gfc_conv_ss_startstride): Only perform bounds
checking for optional args when they are present.
* gfortran.dg/bounds_check_9.f90: New test.
* gfortran.dg/bounds_check_fail_2.f90: New test.
From-SVN: r128587
2007-09-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/29396
PR fortran/29606
PR fortran/30625
PR fortran/30871
* trans.h : Add extra argument to gfc_build_array_ref. Rename
gfc_conv_aliased_arg to gfc_conv_subref_array_arg. Move
prototype of is_aliased_array to gfortran.h and rename it
gfc_is_subref_array. Add field span to lang_decl, add a new
decl lang specific flag accessed by GFC_DECL_SUBREF_ARRAY_P
and a new type flag GFC_DECL_SUBREF_ARRAY_P.
* trans.c (gfc_build_array_ref): Add the new argument, decl.
If this is a subreference array pointer, use the lang_decl
field 'span' to calculate the offset in bytes and use pointer
arithmetic to address the element.
* trans-array.c (gfc_conv_scalarized_array_ref,
gfc_conv_array_ref): Add the backend declaration as the third
field, if it is likely to be a subreference array pointer.
(gfc_conv_descriptor_dimension, gfc_trans_array_ctor_element,
gfc_trans_array_constructor_element, structure_alloc_comps,
gfc_conv_array_index_offset): For all other references to
gfc_build_array_ref, set the third argument to NULL.
(gfc_get_dataptr_offset): New function.
(gfc_conv_expr_descriptor): If the rhs of a pointer assignment
is a subreference array, then calculate the offset to the
subreference of the first element and set the descriptor data
pointer to this, using gfc_get_dataptr_offset.
trans-expr.c (gfc_get_expr_charlen): Use the expression for the
character length for a character subreference.
(gfc_conv_substring, gfc_conv_subref_array_arg): Add NULL for
third argument in call to gfc_build_array_ref.
(gfc_conv_aliased_arg): Rename to gfc_conv_subref_array_arg.
(is_aliased_array): Remove.
(gfc_conv_function_call): Change reference to is_aliased_array
to gfc_is_subref_array and reference to gfc_conv_aliased_arg to
gfc_conv_subref_array_arg.
(gfc_trans_pointer_assignment): Add the array element length to
the lang_decl 'span' field.
* gfortran.h : Add subref_array_pointer to symbol_attribute and
add the prototype for gfc_is_subref_array.
* trans-stmt.c : Add NULL for third argument in all references
to gfc_build_array_ref.
* expr.c (gfc_is_subref_array): Renamed is_aliased_array.
If this is a subreference array pointer, return true.
(gfc_check_pointer_assign): If the rhs is a subreference array,
set the lhs subreference_array_pointer attribute.
* trans-decl.c (gfc_get_symbol_decl): Allocate the lang_decl
field if the symbol is a subreference array pointer and set an
initial value of zero for the 'span' field.
* trans-io.c (set_internal_unit): Refer to is_subref_array and
gfc_conv_subref_array_arg.
(nml_get_addr_expr): Add NULL third argument to
gfc_build_array_ref.
(gfc_trans_transfer): Use the scalarizer for a subreference
array.
2007-09-16 Paul Thomas <pault@gcc.gnu.org>
PR fortran/29396
PR fortran/29606
PR fortran/30625
PR fortran/30871
* gfortran.dg/subref_array_pointer_1.f90: New test.
* gfortran.dg/subref_array_pointer_2.f90: New test.
From-SVN: r128523
2007-08-31 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31879
PR fortran/31197
PR fortran/31258
PR fortran/32703
* gfortran.h : Add prototype for gfc_resolve_substring_charlen.
* resolve.c (gfc_resolve_substring_charlen): New function.
(resolve_ref): Call gfc_resolve_substring_charlen.
(gfc_resolve_character_operator): New function.
(gfc_resolve_expr): Call the new functions in cases where the
character length is missing.
* iresolve.c (cshift, eoshift, merge, pack, reshape, spread,
transpose, unpack): Call gfc_resolve_substring_charlen for
source expressions that are character and have a reference.
* trans.h (gfc_trans_init_string_length) Change name to
gfc_conv_string_length; modify references in trans-expr.c,
trans-array.c and trans-decl.c.
* trans-expr.c (gfc_trans_string_length): Handle case of no
backend_decl.
(gfc_conv_aliased_arg): Remove code for treating substrings
and replace with call to gfc_trans_string_length.
* trans-array.c (gfc_conv_expr_descriptor): Remove code for
treating strings and call gfc_trans_string_length instead.
2007-08-31 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31879
* gfortran.dg/char_length_7.f90: New test.
* gfortran.dg/char_length_9.f90: New test.
* gfortran.dg/char_assign_1.f90: Add extra warning.
PR fortran/31197
PR fortran/31258
* gfortran.dg/char_length_8.f90: New test.
From-SVN: r127939
2007-08-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32875
* trans-array.c (get_array_ctor_strlen): Set the character
length of a zero length array to zero.
2007-08-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32875
* gfortran.dg/array_constructor_18.f90: New test.
From-SVN: r127608
2007-08-13 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32962
* trans-array.c (gfc_conv_array_transpose): Set the offset
of the destination to zero if the loop is zero based.
2007-08-13 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32962
* gfortran.dg/transpose_1.f90: New test.
From-SVN: r127391
PR fortran/32937
* trans-array.c (gfc_conv_expr_descriptor): Use
gfc_conv_const_charlen to generate backend_decl of right type.
* trans-expr.c (gfc_conv_expr_op): Use correct return type.
(gfc_build_compare_string): Use int type instead of default
integer kind for single character comparison.
(gfc_conv_aliased_arg): Give backend_decl the right type.
* trans-decl.c (gfc_build_intrinsic_function_decls): Make
compare_string return an int.
* gfortran.dg/char_length_6.f90: New test.
* intrinsics/string_intrinsics.c (compare_string): Return an int.
* libgfortran.h (compare_string): Likewise.
From-SVN: r127363
PR fortran/31270
* trans.c (gfc_trans_runtime_check): Reorder arguments and
add extra variable arguments. Hand them to the library function.
* trans.h (gfc_trans_runtime_check): Update prototype.
* trans-array.c (gfc_trans_array_bound_check): Issue more
detailled error messages.
(gfc_conv_array_ref): Likewise.
(gfc_conv_ss_startstride): Likewise.
(gfc_trans_dummy_array_bias): Reorder arguments to
gfc_trans_runtime_check.
* trans-expr.c (gfc_conv_substring): Issue more detailled
error messages.
(gfc_conv_function_call): Reorder arguments to gfc_trans_runtime_check.
* trans-stmt.c (gfc_trans_goto): Likewise.
* trans-io.c (set_string): Reorder arguments to
gfc_trans_runtime_check and issue a more detailled error message.
* trans-decl.c (gfc_build_builtin_function_decls): Make
runtime_error and runtime_error_at handle a variable number of
arguments.
* trans-intrinsic.c (gfc_conv_intrinsic_bound): Reorder arguments
to gfc_trans_runtime_check.
(gfc_conv_intrinsic_minmax): Likewise.
(gfc_conv_intrinsic_repeat): Issue more detailled error messages.
* runtime/error.c (runtime_error_at): Add a variable number of
arguments.
* libgfortran.h (runtime_error_at): Update prototype.
From-SVN: r127352
2007-07-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31211
* trans-expr.c (gfc_conv_expr_reference): Add block for case of
scalar pointer functions so that NULL result is correctly
handled.
PR fortran/32682
*trans-array.c (gfc_trans_array_constructor): On detecting a
multi-dimensional parameter array, set the loop limits.
2007-07-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31211
* gfortran.dg/actual_pointer_function_1.f90: New test.
PR fortran/32682
* gfortran.dg/scalarize_parameter_array_1.f90: New test.
From-SVN: r127044
2007-07-11 Richard Guenther <rguenther@suse.de>
* trans-array.c (gfc_conv_array_parameter): Use correct
types for comparison.
* trans-intrinsic.c (gfc_conv_intrinsic_repeat): Use
correct types for POINTER_PLUS_EXPR.
* trans-stmt.c (gfc_trans_forall_loop): Use correct type
for integer one constant.
From-SVN: r126543
PR fortran/29459
* trans-array.c (gfc_trans_array_constructor): Mark offset field
with TREE_NO_WARNING.
* trans-decl.c (gfc_build_qualified_array): Mark lbound, ubound,
stride and size variables with TREE_NO_WARNING.
From-SVN: r126496
2007-05-31 Richard Guenther <rguenther@suse.de>
* trans-expr.c (gfc_conv_expr_op): Use zero constant
that matches the lse type.
(gfc_trans_string_copy): Use sizetype zero constant.
* intrinsic.c (add_functions): The sizeof intrinsic has
index type result.
* trans-types.c (gfc_get_dtype): Convert size to index
type before shifting.
* trans-array.c (gfc_trans_array_constructor_value): Use
index type for offset computation.
* trans-intrinsic.c (gfc_conv_associated): Use correct type
for zero constant.
From-SVN: r125242
2007-05-31 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32156
* trans-array.c (gfc_trans_array_constructor): Treat the case
where the ss expression charlen is missing.
2007-05-31 Paul Thomas <pault@gcc.gnu.org>
PR fortran/32156
* gfortran.dg/char_array_constructor_3.f90: New test.
From-SVN: r125241
2007-05-26 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31219
* trans.h : Add no_function_call bitfield to gfc_se structure.
Add stmtblock_t argument to prototype of get_array_ctor_strlen.
* trans-array.c (get_array_ctor_all_strlen): New function.
(get_array_ctor_strlen): Add new stmtblock_t argument and call
new function for character elements that are not constants,
arrays or variables.
(gfc_conv_array_parameter): Call get_array_ctor_strlen to get
good string length.
* trans-intrinsic (gfc_conv_intrinsic_len): Add new argument
to call of get_array_ctor_strlen.
2007-05-26 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31219
* gfortran.dg/array_constructor_17.f90: New test.
From-SVN: r125088
PR fortran/31627
* trans-array.c (gfc_trans_array_bound_check): Take extra argument to
indicate whether we should check the upper bound in that dimension.
(gfc_conv_array_index_offset): Check only the lower bound of the
last dimension for assumed-size arrays.
(gfc_conv_array_ref): Likewise.
(gfc_conv_ss_startstride): Likewise.
* gfortran.dg/bounds_check_7.f90: New test.
From-SVN: r124940
2007-05-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31867
PR fortran/31994
* trans-array.c (gfc_conv_expr_descriptor): Obtain the stored
offset for non-descriptor, source arrays and correct for stride
not equal to one before writing to field of output descriptor.
2007-05-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31867
* gfortran.dg/char_length_5.f90: New test.
PR fortran/31994
* gfortran.dg/array_reference_1.f90: New test.
From-SVN: r124903
2007-05-08 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31692
* trans-array.c (gfc_conv_array_parameter): Convert full array
references to the result of the procedure enclusing the call.
2007-05-08 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31692
* gfortran.dg/actual_array_result_1.f90: New test.
From-SVN: r124546
2007-04-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31711
* trans-array.c (gfc_conv_resolve_dependencies): Create a temp
whenever a dependency is found.
2007-04-29 Paul Thomas <pault@gcc.gnu.org>
PR fortran/31711
* gfortran.dg/dependency_21.f90: New test.
From-SVN: r124269
* trans-types.h (gfc_packed): New enum.
(gfc_get_nodesc_array_type): Change prototype to use new enum.
* trans-types.c (gfc_get_nodesc_array): Use gfc_packed for
argument packed. Adapt all references to values accordingly.
(gfc_sym_type): Use enum values in call to gfc_get_nodesc_array.
(gfc_get_derived_type): Likewise.
* trans-array.c (gfc_build_constant_array_constructor): Likewise.
* trans-expr.c (gfc_get_interface_mapping_charlen): Changed packed
argument to type gfc_packed.
(gfc_add_interface_mapping): Use enum values in call to
gfc_get_interface_mapping.
* trans-decl.c (gfc_build_dummy_array_decl): Adapt to use enum
values when determining packing.
From-SVN: r123924
2007-03-15 Tobias Burnus <burnus@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
PR fortran/30922
* decl.c (gfc_match_import): If the parent of the current name-
space is null, try looking for an imported symbol in the parent
of the proc_name interface.
* resolve.c (resolve_fl_variable): Do not check for blocking of
host association by a same symbol, if the symbol is in an
interface body.
2007-03-15 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30879
* decl.c (match_data_constant): Before going on to try to match
a name, try to match a structure component.
PR fortran/30870
* resolve.c (resolve_actual_arglist): Do not reject a generic
actual argument if it has a same name specific interface.
PR fortran/31163
* trans-array.c (parse_interface): Do not nullify allocatable
components if the symbol has the saved attribute.
2007-03-15 Paul Thomas <pault@gcc.gnu.org>
PR fortran/30922
* gfortran.dg/import5.f90.f90: New test.
PR fortran/30879
* gfortran.dg/data_components_1.f90: New test.
PR fortran/30870
* gfortran.dg/generic_13.f90: New test.
PR fortran/31163
* gfortran.dg/alloc_comp_basics_5.f90: New test.
From-SVN: r122944
* trans-array.c (gfc_trans_auto_array_allocation): Replace
fold(convert()) by fold_convert().
(gfc_duplicate_allocatable): Likewise.
* trans-intrinsic.c (gfc_conv_intrinsic_dot_product): Use
build_int_cst instead of converting an integer_zero_node
to the final type.
From-SVN: r122921
* trans-array.c (gfc_build_constant_array_constructor): When the
shape of the constructor is known, use that to construct the
gfc_array_spec.
(gfc_trans_constant_array_constructor): Initialize the "info"
information for all of the dimensions of the array constructor.
(constant_array_constructor_loop_size): New function.
(gfc_trans_array_constructor): Use it to determine whether a
loop is suitable for "constant array constructor" optimization.
* trans-intrinsic.c (gfc_conv_intrinsic_anyall): Use fold_build2
instead of build2, to avoid conditions like "(a != b) != 0".
* gfortran.dg/array_constructor_15.f90: New test case.
From-SVN: r122103
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree.h (enum tree_code_class): Add tcc_vl_exp.
(VL_EXP_CLASS_P): New.
(TREE_OPERAND_CHECK): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(TREE_OPERAND_CHECK_CODE): Likewise.
(GIMPLE_STMT_OPERAND_CHECK): Likewise.
(TREE_RTL_OPERAND_CHECK): Likewise.
(tree_operand_check_failed): Make second parameter the whole tree
instead of its code. Fixed callers.
(VL_EXP_CHECK): New.
(TREE_OPERAND_LENGTH): New.
(VL_EXP_OPERAND_LENGTH): New.
(CALL_EXPR_FN): New.
(CALL_EXPR_STATIC_CHAIN): New.
(CALL_EXPR_ARGS): New.
(CALL_EXPR_ARG): New.
(call_expr_nargs): New.
(CALL_EXPR_ARGP): New.
(build_nt_call_list): Declare.
(build_vl_exp_stat): Declare.
(build_vl_exp): New.
(build_call_list): Declare.
(build_call_nary): Declare.
(build_call_valist): Declare.
(build_call_array): Declare.
(call_expr_arg): Declare.
(call_expr_argp): Declare.
(call_expr_arglist): Declare.
(fold_build_call_list): Declare.
(fold_build_call_list_initializer): Declare.
(fold_call_expr): Declare to replace fold_builtin.
(fold_builtin_fputs): Update to agree with modified definition.
(fold_builtin_strcpy): Likewise.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_build_call_expr): Declare.
(fold_builtin_call_list): Declare.
(fold_builtin_call_valist): Declare.
(build_call_expr): Declare.
(validate_arglist): Update to agree with modified definition.
(tree_operand_length): New.
(call_expr_arg_iterator): New.
(init_call_expr_arg_iterator): New.
(next_call_expr_arg): New.
(first_call_expr_arg): New.
(more_call_expr_args_p): New.
(FOR_EACH_CALL_EXPR_ARG): New.
* tree.c (tree_code_class_string): Add entries for tcc_vl_exp
and tcc_gimple_stmt.
(tree_code_size): Update documentation. Use sizeof (tree) rather
than sizeof (char *).
(tree_size): Likewise. Add case for tcc_vl_exp.
(tree_node_structure): Add case for tcc_vl_exp.
(contains_placeholder_p): Likewise.
(substitute_in_expr): Likewise.
(substitute_placeholder_in_expr): Likewise.
(stabilize_reference_1): Likewise.
(build3_stat): Remove logic for CALL_EXPRs. Replace with assertion
to diagnose breakage of this interface for constructing CALL_EXPRs.
(build_nt): Add similar assertion here.
(build_nt_call_list): New.
(simple_cst_equal) <CALL_EXPR>: Rewrite to use new accessors.
(iterative_hash_expr): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(get_callee_fndecl): Use new CALL_EXPR accessors.
(tree_operand_check_failed): Change parameters to pass entire node
instead of its code, so that we can call TREE_OPERAND_LENGTH on it.
(process_call_operands): New.
(build_vl_exp_stat): New.
(build_call_list): New.
(build_call_nary): New.
(build_call_valist): New.
(build_call_array): New.
(walk_tree): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(call_expr_arglist): New.
* tree.def (CALL_EXPR): Change representation of CALL_EXPRs to use
tcc_vl_exp instead of a fixed-size tcc_expression.
* doc/c-tree.texi (CALL_EXPR): Document new representation and
accessors for CALL_EXPRs.
(AGGR_INIT_EXPR): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* builtins.c (c_strlen): Return NULL_TREE instead of 0.
(expand_builtin_nonlocal_goto): Change parameter to be entire
CALL_EXPR instead of an arglist. Use new CALL_EXPR accessors.
(expand_builtin_prefetch): Likewise.
(expand_builtin_classify_type): Likewise.
(mathfn_built_in): Return NULL_TREE instead of 0.
(expand_errno_check): Use new CALL_EXPR accessors.
(expand_builtin_mathfn): Use new CALL_EXPR accessors and constructors.
Return NULL_RTX instead of 0.
(expand_builtin_mathfn_2): Likewise.
(expand_builtin_mathfn_3): Likewise.
(expand_builtin_interclass_mathfn): Likewise.
(expand_builtin_sincos): Likewise.
(expand_builtin_cexpi): Likewise.
(expand_builtin_int_roundingfn): Likewise.
(expand_builtin_int_roundingfn_2): Likewise.
(expand_builtin_pow): Likewise.
(expand_builtin_powi): Likewise.
(expand_builtin_strlen): Pass entire CALL_EXPR as parameter instead
of arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_RTX instead of 0.
(expand_builtin_strstr): Likewise.
(expand_builtin_strchr): Likewise.
(expand_builtin_strrchr): Likewise.
(expand_builtin_strpbrk): Likewise.
(expand_builtin_memcpy): Likewise.
(expand_builtin_mempcpy): Likewise.
(expand_builtin_mempcpy_args): New.
(expand_builtin_memmove): Similarly to expand_builtin_mempcpy.
(expand_builtin_memmove_args): New.
(expand_builtin_bcopy): Similarly to expand_builtin_mempcpy.
(expand_movstr): Likewise.
(expand_builtin_strcpy): Likewise.
(expand_builtin_strcpy_args): New.
(expand_builtin_stpcpy): Similarly to expand_builtin_strcpy.
(expand_builtin_strncpy): Likewise.
(expand_builtin_memset): Likewise.
(expand_builtin_memset_args): New.
(expand_builtin_bzero): Similarly to expand_builtin_memset.
(expand_builtin_memcmp): Likewise.
(expand_builtin_strcmp): Likewise.
(expand_builtin_strncmp): Likewise.
(expand_builtin_strcat): Likewise.
(expand_builtin_strncat): Likewise.
(expand_builtin_strspn): Likewise.
(expand_builtin_strcspn): Likewise.
(expand_builtin_args_info): Likewise.
(expand_builtin_va_start): Likewise.
(gimplify_va_arg_expr): Likewise.
(expand_builtin_va_end): Likewise.
(expand_builtin_va_copy): Likewise.
(expand_builtin_frame_address): Likewise.
(expand_builtin_alloca): Likewise.
(expand_builtin_bswap): Likewise.
(expand_builtin_unop): Likewise.
(expand_builtin_fputs): Likewise.
(expand_builtin_expect): Likewise.
(expand_builtin_fabs): Likewise.
(expand_builtin_copysign): Likewise.
(expand_builtin_printf): Likewise.
(expand_builtin_fprintf): Likewise.
(expand_builtin_sprintf): Likewise.
(expand_builtin_init_trampoline): Likewise.
(expand_builtin_signbit): Likewise.
(expand_builtin_fork_or_exec): Likewise.
(expand_builtin_sync_operation): Likewise.
(expand_builtin_compare_and_swap): Likewise.
(expand_builtin_lock_test_and_set): Likewise.
(expand_builtin_lock_release): Likewise.
(expand_builtin): Likewise.
(builtin_mathfn_code): Likewise.
(fold_builtin_constant_p): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_expect): Likewise.
(fold_builtin_classify_type): Likewise.
(fold_builtin_strlen): Likewise.
(fold_builtin_nan): Likewise.
(integer_valued_real_p): Likewise.
(fold_trunc_transparent_mathfn): Likewise.
(fold_fixed_mathfn): Likewise.
(fold_builtin_cabs): Likewise.
(fold_builtin_sqrt): Likewise.
(fold_builtin_cbrt): Likewise.
(fold_builtin_cos): Likewise.
(fold_builtin_cosh): Likewise.
(fold_builtin_tan): Likewise.
(fold_builtin_sincos): Likewise.
(fold_builtin_cexp): Likewise.
(fold_builtin_trunc): Likewise.
(fold_builtin_floor): Likewise.
(fold_builtin_ceil): Likewise.
(fold_builtin_round): Likewise.
(fold_builtin_int_roundingfn): Likewise.
(fold_builtin_bitop): Likewise.
(fold_builtin_bswap): Likewise.
(fold_builtin_logarithm): Likewise.
(fold_builtin_hypot): Likewise.
(fold_builtin_pow): Likewise.
(fold_builtin_powi): Likewise.
(fold_builtin_exponent): Likewise.
(fold_builtin_memset): Likewise.
(fold_builtin_bzero): Likewise.
(fold_builtin_memory_op): Likewise.
(fold_builtin_bcopy): Deleted; call site changed to invoke
fold_builtin_memory_op directly.
(fold_builtin_strcpy): Similarly as for fold_builtin_memory_op.
(fold_builtin_strncpy): Likewise.
(fold_builtin_memcmp): Likewise.
(fold_builtin_strcmp): Likewise.
(fold_builtin_strncmp): Likewise.
(fold_builtin_signbit): Likewise.
(fold_builtin_copysign): Likewise.
(fold_builtin_isascii): Likewise.
(fold_builtin_toascii): Likewise.
(fold_builtin_isdigit): Likewise.
(fold_builtin_fabs): Likewise.
(fold_builtin_abs): Likewise.
(fold_builtin_fmin_fmax): Likewise.
(fold_builtin_carg): Likewise.
(fold_builtin_classify): Likewise.
(fold_builtin_unordered_cmp): Likewise.
(fold_builtin_0, fold_builtin_2, fold_builtin_3, fold_builtin_4):
New functions split out from fold_builtin_1.
(fold_builtin_n): New.
(fold_builtin_varargs): New.
(fold_builtin): Deleted. Most callers changed to use fold_call_expr
instead.
(fold_call_expr): New.
(build_function_call_expr): Rewrite to use new helper function.
(fold_builtin_call_list): New.
(build_call_expr): New.
(fold_builtin_call_valist): New.
(rewrite_call_expr): New.
(validate_arg): New.
(validate_arglist): Change parameter to be entire CALL_EXPR instead
of an arglist. Change return type to bool. Use new CALL_EXPR
accessors.
(fold_builtin_strstr): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_strchr): Likewise.
(fold_builtin_strrchr): Likewise.
(fold_builtin_strpbrk): Likewise.
(fold_builtin_strcat): Likewise.
(fold_builtin_strncat): Likewise.
(fold_builtin_strspn): Likewise.
(fold_builtin_strcspn): Likewise.
(fold_builtin_fputs): Likewise.
(fold_builtin_next_arg): Likewise.
(fold_builtin_sprintf): Likewise.
(expand_builtin_object_size): Use new CALL_EXPR accessors. Use
NULL_RTX instead of 0.
(expand_builtin_memory_chk): Likewise.
(maybe_emit_chk_warning): Likewise.
(maybe_emit_sprintf_chk_warning): Likewise.
(fold_builtin_object_size): Pass call arguments individually instead
of as an arglist, fixing callers appropriately. Use new CALL_EXPR
accessors and constructors. Return NULL_TREE instead of 0.
(fold_builtin_memory_chk): Likewise.
(fold_builtin_stxcpy_chk): Likewise.
(fold_builtin_strncpy_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strcat_chk): Likewise.
(fold_builtin_strncat_chk): Likewise.
(fold_builtin_sprintf_chk): Likewise.
(fold_builtin_snprintf_chk): Likewise.
(fold_builtin_printf): Likewise.
(fold_builtin_vprintf): Likewise.
* fold-const.c (negate_expr_p): Use new CALL_EXPR accessors and
constructors.
(operand_equal_p): Add separate tcc_vl_exp/CALL_EXPR case.
(make_range): Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(extract_muldiv_1): Add VL_EXP_CLASS_P case.
(fold_mathfn_compare): Use new CALL_EXPR accessors and constructors.
(fold_unary): Likewise.
(fold_binary): Likewise.
(fold_ternary): Remove CALL_EXPR case, since they are no longer
ternary expressions.
(fold): Add logic for tcc_vl_exp.
(fold_checksum_tree): Make it know about tcc_vl_exp. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(fold_build3_stat): Add assertion to flag broken interface for
constructing CALL_EXPRs.
(fold_build_call_list): New.
(fold_build_call_list_initializer): New.
(tree_expr_nonnegative_p): Use new CALL_EXPR accessors and
constructors.
(fold_strip_sign_ops): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* tree-dump.c (dequeue_and_dump) <CALL_EXPR>: Use new CALL_EXPR
accessors and dump arguments explicitly.
* tree-pretty-print.c (do_niy): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(dump_generic_node): Use new CALL_EXPR accessors and walk arguments
explicitly.
(print_call_name): Use new CALL_EXPR accessors.
* print-tree.c (print_node): Add case tcc_vl_exp. Print
CALL_EXPR arguments explicitly instead of as a list. Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-vrp.c (stmt_interesting_for_vrp): Use new CALL_EXPR accessors.
(vrp_visit_stmt): Likewise.
* tree-ssa-loop-im.c (outermost_invariant_loop_expr): Make it
know about tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
(force_move_till_expr): Likewise.
* targhooks.c (default_external_stack_protect_fail): Use
build_call_expr instead of build_function_call_expr.
(default_hidden_stack_protect_fail): Likewise.
* tree-complex.c (expand_complex_libcall): Use build_call_expr to
build the call.
* cgraphbuild.c (build_cgraph_edges): Use new CALL_EXPR accessors
and walk arguments explicitly.
* tree-ssa-loop-niter.c (simplify_replace_tree): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(expand_simple_operations): Likewise.
(infer_loop_bounds_from_array): Use new CALL_EXPR accessors.
* gengtype.c (adjust_field_tree_exp): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
(walk_type): Tweak walking of arrays not to blow up on CALL_EXPRs.
* optabs.c (expand_widen_pattern-expr): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* value_prof.c (tree_ic): Use new CALL_EXPR accessors.
(tree_ic_transform): Likewise.
(interesting_stringop_to_profile_p): Pass entire CALL_EXPR as
parameter instead of arglist. Fix callers.
(tree_stringop_fixed_value): Use new CALL_EXPR accessors.
(tree_stringops_transform): Likewise.
(tree_indirect_call_to_profile): Likewise.
(tree_stringops_values_to_profile): Likewise.
* tree-tailcall.c (find_tail_calls): Use new CALL_EXPR iterator.
(eliminate_tail_call): Likewise.
* ipa-cp.c (ipcp_update_callgraph): Use new CALL_EXPR accessors.
* tree-scalar-evolution.c (chrec_contains_symbols_defined_in_loop):
Use TREE_OPERAND_LENGTH and generalize to handle any number of
operands.
(instantiate_parameters_1): Can't handle tcc_vl_exp here.
* omp-low.c (build_omp_barrier): Use build_call_expr.
(lower_rec_input_clauses): Likewise.
(lower_reduction_clauses): Likewise.
(expand_parallel_call): Likewise.
(maybe_catch_exception): Likewise.
(expand_omp_for_generic): Likewise.
(expand_omp_for_static_nochunk): Likewise.
(expand_omp_sections): Likewise.
(lower_omp_single_simple): Likewise.
(lower_omp_single_copy): Likewise.
(lower_omp_master): Likewise.
(lower_omp_ordered): Likewise.
(lower_omp_critical): Likewise.
* ipa-reference.c (check-call): Use new CALL_EXPR iterator.
(scan_for_static_refs): Create tcc_vl_exp case for CALL_EXPR.
* tree-gimple.c (is_gimple_call_addr): Fix doc.
(recalculate_side_effects): Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH. Add tcc_vl_exp case.
* tree-chrec.c (chrec_contains_symbols): Use TREE_OPERAND_LENGTH
and generalize to handle any number of operands.
(chrec_contains_undetermined): Likewise.
(tree_contains_chrecs): Likewise.
(evolution_function_is_invariant_rec_p): Use TREE_OPERAND_LENGTH.
* cgraphunit.c (update_call_expr): Use new CALL_EXPR accessors.
* tree-ssa-ccp.c (ccp_fold): Use new CALL_EXPR accessors. Use
fold_call_expr instead of fold_builtin.
(ccp_fold_builtin): Likewise. Update calls into builtins.c to
match declarations there.
(fold_stmt): Use new CALL_EXPR constructor and accessors. Doc
updates.
* tree-ssa-loop-ivopts.c (expr_invariant_in_loop_p): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* ipa-pure-const.c (check_call): Use new CALL_EXPR accessors.
(scan_function): Add case tcc_vl_exp for CALL_EXPR.
* tree-stdarg.c (execute_optimize_stdarg): Use new CALL_EXPR
accessors.
* tree-ssa-math-opts.c (execute_cse_sincos_1): Use build_call_expr.
(execute_cse_sincos): Use new CALL_EXPR accessors.
* tree-ssa-alias.c (find_used_portions): Use new CALL_EXPR iterator.
* gimple-low.c (lower_function_body): Use build_call_expr.
(lower_builtin_setjmp): Likewise.
* expr.c (emit_block_move_via_libcall): Use build_call_expr.
(set_storage_via_libcall): Likewise.
(safe_from_p): Add tcc_vl_exp case. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(expand_expr_real_1): Use new CALL_EXPR accessors.
* tree-browser.c (store_child_info): Use TREE_OPERAND_LENGTH and
generalize to handle any number of operands.
(TB_parent_eq): Likewise.
* predict.c (expr_expected_value): Use new CALL_EXPR accessors.
(strip_builtin_expect): Likewise.
* function.c (gimplify_parameters): Use build_call_expr.
* tree-vectorizer.c (vect_is_simple_reduction): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* ipa-type-escape.c (check_call): Use new CALL_EXPR iterators.
(scan_for_refs): Add case tcc_vl_exp for CALL_EXPR.
* tree-data-ref.c (get_references_in_stmt): Use new CALL_EXPR
iterators.
* gimplify.c (build_stack_save_restore): Use build_call_expr.
(gimplify_decl_expr): Likewise.
(gimplify_call_expr): Use fold_call_expr instead of fold_builtin.
Use new CALL_EXPR iterators.
(gimplify_modify_expr_to_memcpy): Use build_call_expr.
(gimplify_modify_expr_to_memset): Likewise.
(gimplify_variable_sized_compare): Likewise.
(gimplify_omp_atomic_fetch_op): Likewise.
(gimplify_omp_atomic_pipeline): Likewise.
(gimplify_omp_atomic_mutex): Likewise.
(gimplify_function_tree): Likewise.
* calls.c (alloca_call_p): Use new CALL_EXPR accessors.
(call_expr_flags): Likewise.
(expand_call): Likewise.
* except.c (expand_builtin_eh_return_data_regno): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
* coverage.c (create_coverage): Use build_call_expr.
* tree-ssa-pre.c (expression_node_pool, list_node_pool): Delete.
(temp_call_expr_obstack): New.
(pool_copy_list): Delete.
(temp_copy_call_expr): New.
(phi_translate): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors. Get rid of special goo for copying argument
lists and use temp_copy_call_expr instead.
(valid_in_sets): Add case tcc_vl_exp for CALL_EXPR. Use new
CALL_EXPR accessors.
(create_expression_by_pieces): Likewise. Use build_call_array
to construct the result instead of fold_build3.
(create_value_expr_from): Add tcc_vl_exp. Delete special goo for
dealing with argument lists.
(init_pre): Remove references to expression_node_pool and
list_node_pool. Init temp_call_expr_obstack instead.
(fini_pre): Remove references to expression_node_pool and
list_node_pool.
* tree-sra.c (sra_walk_call_expr): Use new CALL_EXPR accessors
and walk arguments explicitly instead of as a list.
* tree-mudflap.c (mf_build_check_statement_for): Use build_call_expr.
(mx_register_decls): Likewise.
(mudflap_register_call): Likewise.
(mudflap_finish_file): Likewise.
* ipa-prop.c (ipa_callsite_compute_count): Use new CALL_EXPR accessors.
(ipa_callsite_compute_param): Likewise.
* tree-vect-patterns.c (vect_recog_pow_pattern): Use new CALL_EXPR
accessors and constructor.
* tree-nested.c (convert_nl_goto_reference): Use new CALL_EXPR
accessors and constructor.
(convert_tramp_reference): Likewise.
(convert_call_expr): Likewise.
(finalize_nesting_tree_1): Likewise.
* tree-ssa.c (tree_ssa_useless_type_conversion): Use new CALL_EXPR
accessors.
* tree-ssa-loop-prefetch.c (issue_prefetch_ref): Use build_call_expr.
* tree-inline.c (initialize_inlined_parameters): Pass entire
CALL_EXPR as parameter instead of arglist. Use new CALL_EXPR
accessors.
(estimate_num_insns_1): Use new CALL_EXPR accessors.
(expand_call_inline): Tidy up call to initialize_inlined_parameters.
* tree-vect-transform.c (vect_create_epilog_for_reduction): Use
TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
(vectorizable_reduction): Likewise.
(vectorizable_call): Use new CALL_EXPR iterators.
(vectorizable_conversion): Use build_call_expr.
(vectorizable_operation): Use TREE_OPERAND_LENGTH.
(vect_gen_widened_results_half): Use build_call_expr.
(vect_setup_realignment): Likewise.
(vectorizable_live_operation): Use TREE_OPERAND_LENGTH.
* tree-object-size.c (alloc_object_size): Use new CALL_EXPR accessors.
(pass_through_call): Likewise.
(compute_object_sizes): Likewise. Use fold_call_expr instead of
fold_builtin.
* tree-profile.c (tree_gen_interval_profiler): Use build_call_expr.
(tree_gen_pow2_profiler): Likewise.
(tree_gen_one_value_profiler): Likewise.
(tree_gen_ic_func_profiler): Likewise.
(tree_gen_average_profiler): Likewise.
(tree_gen_ior_profiler): Likewise.
* tree-ssa-structalias.c (get_constraint_for): Add case tcc_vl_exp.
(find_func_aliases): Use new CALL_EXPR accessors. Add case
tcc_vl_exp. Use TREE_OPERAND_LENGTH instead of TREE_CODE_LENGTH.
* tree-ssa-reassoc.c (get_rank): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* stmt.c (warn_if_unused_value): Use TREE_OPERAND_LENGTH instead
of TREE_CODE_LENGTH.
* convert.c (convert_to_real): Use new CALL_EXPR accessors and
constructor.
(convert_to_integer): Likewise.
* tree-ssa-operands.c (get_call_expr_operands): Use new CALL_EXPR
accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* config/alpha/alpha.c (alpha_expand_builtin): Use new CALL_EXPR
accessors.
* config/frv/frv.c (frv_expand_builtin): Likewise.
* config/s390/s390.c (s390_expand_builtin): Likewise.
* config/sparc/sparc.c (sparc_gimplify_va_arg): Use build_call_expr.
(sparc_expand_builtin): Use new CALL_EXPR accessors.
* config/i386/i386.c (ix86_function_ok_for_sibcall): Likewise.
(ix86_expand_binop_builtin): Pass entire CALL_EXPR as parameter
instead of arglist. Use new CALL_EXPR accessors on it. Fix callers.
(ix86_expand_store_builtin): Likewise.
(ix86_expand_unop_builtin): Likewise.
(ix86_expand_unop1_builtin): Likewise.
(ix86_expand_sse_compare): Likewise.
(ix86_expand_sse_comi): Likewise.
(ix86_expand_vec_init_builtin): Likewise.
(ix86_expand_vec_ext_builtin): Likewise.
(ix86_expand_vec_set_builtin): Likewise.
(ix86_expand_builtin): Use new CALL_EXPR accessors.
* config/sh/sh.c (sh_expand_builtin): Use new CALL_EXPR accessors.
* config/c4x/c4x.c (c4x_expand_builtin): Likewise.
* config/iq2000/iq2000.c (expand_one_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(iq2000_expand_builtin): Use new CALL_EXPR accessors.
* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Use
build_call_expr.
* config/rs6000/rs6000.c (rs6000_gimplify_va_arg): Likewise.
(rs6000_expand_unop_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_abs_builtin): Likewise.
(rs6000_expand_binop_builtin): Likewise.
(altivec_expand_predicate_builtin): Likewise.
(altivec_expand_lv_builtin): Likewise.
(spe_expand_stv_builtin): Likewise.
(altivec_expand_stv_builtin): Likewise.
(rs6000_expand_ternop_builtin): Likewise.
(altivec_expand_ld_builtin): Use new CALL_EXPR accessors.
(altivec_expand_st_builtin): Likewise.
(altivec_expand_dst_builtin): Likewise.
(altivec_expand_vec_init_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(altivec_expand_vec_set_builtin): Likewise.
(altivec_expand_vec_ext_builtin): Likewise.
(altivec_expand_builtin): Use new CALL_EXPR accessors.
(spe_expand_builtin): Likewise.
(spe_expand_predicate_builtin): Pass entire CALL_EXPR instead of
arglist. Use new CALL_EXPR accessors. Fix callers.
(spe_expand_evsel_builtin): Likewise.
(rs6000_expand_builtin): Use new CALL_EXPR accessors. VCFUX and
FCFSX cases must construct whole new CALL_EXPR, not just arglist.
* config/arm/arm.c (arm_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(arm_expand_unop_builtin): Likewise.
(arm_expand_builtin): Use new CALL_EXPR accessors.
* config/mips/mips.c (mips_expand_builtin): Use new CALL_EXPR
accessors.
* config/bfin/bfin.c (bfin_expand_binop_builtin): Pass entire CALL_EXPR
instead of arglist. Use new CALL_EXPR accessors. Fix callers.
(bfin_expand_unop_builtin): Likewise.
(bfin_expand_builtin): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* c-semantics.c (build_stmt): Add internal diagnostic check.
* c-pretty-print.c (pp_c_postfix_expression): Use new CALL_EXPR
accessors. Print arguments explicitly instead of as a list.
* c-typeck.c (build_function_call): Use new CALL_EXPR constructors.
* c-omp.c (c_finish_omp_barrier): Use build_call_expr.
(c_finish_omp_flish): Likewise.
* c-common.c (verify_tree): Use new CALL_EXPR accessors. Traverse
arguments explicitly instead of as a list. Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
(check_function_arguments_recurse): Use new CALL_EXPR accessors.
(c_warn_unused_result): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* cp-tree.def (AGGR_INIT_EXPR): Adjust documentation.
Change class to tcc_vl_exp.
* call.c (build_call): Use build_call_list instead
of build3.
(build_over_call): Likewise.
(build_new_method_call): Use build_min_non_dep_call_list
instead of build_min_non_dep.
* error.c (dump_call_expr_args): New function.
(dump_aggr_init_expr_args): New function.
(dump_expr) <AGGR_INIT_EXPR, CALL_EXPR, INDIRECT_REF>: Use them.
Update to use new CALL_EXPR and AGGR_INIT_EXPR accessor macros.
* cvt.c (convert_to_void): Use build_call_array instead
of build3; use new AGGR_INIT_EXPR accessor macros.
* mangle.c (write_expression): Use TREE_OPERAND_LENGTH
instead of TREE_CODE_LENGTH.
* dump.c (cp_dump_tree) <AGGR_INIT_EXPR>: Update to use new
AGGR_INIT_EXPR accessor macros.
* cp-gimplify.c (cp_gimplify_init_expr): Use
AGGR_INIT_EXPR_SLOT to set the slot operand.
* cp-tree.h (AGGR_INIT_EXPR_FN): New macro.
(AGGR_INIT_EXPR_SLOT): New macro.
(AGGR_INIT_EXPR_ARG): New macro.
(aggr_init_expr_nargs): New macro.
(AGGR_INIT_EXPR_ARGP): New macro.
(aggr_init_expr_arg_iterator): New.
(init_aggr_init_expr_arg_iterator): New.
(next_aggr_init_expr_arg): New.
(first_aggr_init_expr_arg): New.
(more_aggr_init_expr_args_p): New.
(FOR_EACH_AGGR_INIT_EXPR_ARG): New.
(stabilize_aggr_init): New declaration.
(build_min_non_dep_call_list): Likewise.
* tree.c (process_aggr_init_operands): New function.
(build_aggr_init_array) New function.
(build_cplus_new): Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros. Replace use of build3 with
build_aggr_init_array.
(build_min_non_dep_call_list) New function.
(build_min_nt): Assert input code parameter is not a variable
length expression class.
(build_min, build_min_non_dep): Likewise.
(cp_tree_equal) <CALL_EXPR>: Iterate through the arguments
to check for equality instead of recursing. Handle tcc_vl_exp
tree code classes.
(stabilize_call): Update to only handle CALL_EXPRs, not
AGGR_INIT_EXPRs; use new CALL_EXPR accessor macros.
(stabilize_aggr_init): New function.
(stabilize_init): Use it.
* cxx-pretty-print.c (pp_cxx_postfix_expression)
<AGGR_INIT_EXPR, CALL_EXPR>: Update to use new CALL_EXPR and
AGGR_INIT_EXPR accessor macros and argument iterators.
* pt.c (tsubst_copy) <CALL_EXPR>: Replace build_nt with
build_vl_exp. Iterate through the operands, recursively
processing each one.
(tsubst_copy_and_build) <CALL_EXPR>: Update to use new
CALL_EXPR accessor macros.
(value_dependent_expression_p) <default>: Handle tcc_vl_exp
tree code classes. Use TREE_OPERAND_LENGTH instead of
TREE_CODE_LENGTH.
* semantics.c (finish_call_expr): Use build_nt_call_list
instead of build_nt.
(simplify_aggr_init_expr): Update to use new AGGR_INIT_EXPR
accessor macros. Use build_call_array to construct the
CALL_EXPR node instead of build3
* decl2.c (build_offset_ref_call_from_tree): Use
build_nt_call_list and build_min_non_dep_call_list instead
of build_min_nt and build_min_non_dep.
* parser.c (cp_parser_postfix_expression) <CPP_OPEN_PAREN>:
Use build_nt_call_list instead of build_min_nt.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* java-tree.h (BUILD_MONITOR_ENTER): Use build_call_nary instead
of build3.
(BUILD_MONITOR_EXIT): Likewise.
* java-gimplify.c (java_gimplify_component_ref): Use build_call_expr.
(java_gimplify_modify_expr): Likewise.
* class.c (cache_this_class_ref): Use build_call_expr.
(build_static_field_ref): Likewise.
(emit_indirect_register_classes): Likewise.
(emit_register_classes): Likewise.
* resource.c (write_resource_constructor): Use build_call_expr.
* builtins.c (builtin_creator_function): Change interpretation of
the second parameter to be the whole CALL_EXPR instead of the arglist.
(max_builtin): Tweak parameter list. Use new CALL_EXPR accessors.
(min_builtin): Likewise.
(abs_builtin): Likewise.
(java_build_function_call_expr): Likewise.
(convert_real): Likewise.
(UNMARSHAL3): Likewise.
(UNMARSHAL4): Likewise.
(UNMARSHAL5): Likewise.
(build_arglist_for_builtin): Delete. Fix callers to use
build_call_expr instead.
(putObject_builtin): Tweak parameter list. Use new CALL_EXPR
accessors.
(compareAndSwapInt_builtin): Likewise.
(compareAndSwapLong_builtin): Likewise.
(compareAndSwapObject_builtin): Likewise.
(putVolatile_builtin): Likewise.
(getVolatile_builtin): Likewise.
(VMSupportsCS8_builtin): Likewise.
(check_for_builtin): Pass entire CALL_EXPR to builtin expander
instead of arglist.
* expr.c (build_java_athrow): Use build_call_nary instead of build3.
(build_java_throw_out_of_bounds_exception): Likewise.
(java_check_reference): Likewise.
(build_java_arraystore_check): Likewise.
(build_newarray): Likewise.
(build_anewarray): Likewise.
(expand_java_multinewarray): Use build_call_list instead of build3.
(build_java_monitor): Use build_call_nary instead of build3.
(java_create_object): Likewise.
(expand_java_NEW): Likewise.
(build_instanceof): Likewise.
(expand_java_CHECKCAST): Likewise.
(build_java_soft_divmod): Likewise.
(build_java_binop): Likewise.
(build_field_ref): Likewise.
(build_class_init): Likewise.
(rewrite_arglist_getcaller): Use build_call_expr.
(build_invokeinterface): Use build_call_nary instead of build3.
(expand_invoke): Use build_call_list instead of build3.
(build_jni_stub): Use build_call_nary, build_call_list, or
build_call_expr instead of build3.
(expand_java_field_op): Use build_call_expr instead of build3.
(force_evaluation_order): Use new CALL_EXPR accessors.
* lang.c (java_get_callee_fndecl): Use new CALL_EXPR accessors.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* objc-act.c (receiver_is_class_object): Use new CALL_EXPR accessors.
(objc_get_callee_fndecl): Likewise.
2007-02-15 Sandra Loosemore <sandra@codesourcery.com>
Brooks Moses <brooks.moses@codesourcery.com>
Lee Millward <lee.millward@codesourcery.com>
* trans-expr.c (gfc_conv_power_op): Use build_call_expr.
(gfc_conv_string_tmp): Likewise.
(gfc_conv_concat_op): Likewise.
(gfc_build_compare_string): Likewise.
(gfc_conv_function_call): Use build_call_list instead of build3.
* trans-array.c (gfc_trans_allocate_array_storage): Use
build_call_expr.
(gfc_grow_array): Likewise.
(gfc_trans_array_ctor_element): Likewise.
(gfc_trans_array_constructor_value): Likewise.
(gfc_array_allocate): Likewise.
(gfc_array_deallocate): Likewise.
(gfc_trans_auto_array_allocation): Likewise.
(gfc_trans_dummy_array_bias): Likewise.
(gfc_conv_array_parameter): Likewise.
(gfc_trans_dealloc_allocated): Likewise.
(gfc_duplicate_allocatable): Likewise.
* trans-openmp.c (gfc_trans_omp_barrier): Use build_call_expr.
(gfc_trans_omp_flush): Likewise.
* trans-stmt.c (gfc_conv_elementel_dependencies): Use build_call_expr.
(gfc_trans_pause): Likewise.
(gfc_trans_stop): Likewise.
(gfc_trans_character_select): Likewise.
(gfc_do_allocate): Likewise.
(gfc_trans_assign_need_temp): Likewise.
(gfc_trans_pointer_assign_need_temp): Likewise.
(gfc_trans_forall_1): Likewise.
(gfc_trans_where_2): Likewise.
(gfc_trans_allocate): Likewise.
(gfc_trans_deallocate): Likewise.
* trans.c (gfc_trans_runtime_check): Use build_call_expr.
* trans-io.c (gfc_trans_open): Use build_call_expr.
(gfc_trans_close): Likewise.
(build_filepos): Likewise.
(gfc_trans_inquire): Likewise.
(NML_FIRST_ARG): Delete.
(NML_ADD_ARG): Delete.
(transfer_namelist_element): Use build_call_expr.
(build_dt): Likewise.
(gfc_trans_dt_end): Likewise.
(transfer_expr): Likewise.
(transfer_array-desc): Likewise.
* trans-decl.c (gfc_generate_function_code): Use build_call_expr.
(gfc_generate_constructors): Likewise.
* trans-intrinsic.c (gfc_conv_intrinsic_ctime): Use build_call_expr.
(gfc_conv_intrinsic_fdate): Likewise.
(gfc_conv_intrinsic_ttynam): Likewise.
(gfc_conv_intrinsic_array_transfer): Likewise.
(gfc_conv_associated): Likewise.
(gfc_conv_intrinsic_si_kind): Likewise.
(gfc_conv_intrinsic_trim): Likewise.
(gfc_conv_intrinsic_repeat: Likewise.
(gfc_conv_intrinsic_iargc): Likewise.
Co-Authored-By: Brooks Moses <brooks.moses@codesourcery.com>
Co-Authored-By: Lee Millward <lee.millward@codesourcery.com>
From-SVN: r122018
PR fortran/30720
* trans-array.c (gfc_trans_create_temp_array): Remove use of the
function argument. Always generate code for negative extent.
Simplify said code.
* trans-array.h (gfc_trans_create_temp_array): Change prototype.
* trans-expr.c (gfc_conv_function_call): Remove use of last argument
of gfc_trans_create_temp_array.
* trans-intrinsic.c (gfc_conv_intrinsic_array_transfer): Likewise.
* trans-stmt.c (gfc_conv_elemental_dependencies): Likewise.
* gfortran.dg/array_function_1.f90: New test.
From-SVN: r121773
* trans-array.c (gfc_conv_expr_descriptor): We don't need to use
a temporary array to pass a constant non-character array constructor.
Generalize the descriptor generation code to handle scalarizer
"info" without an array reference.
From-SVN: r121491
* dependency.c (gfc_full_array_ref_p): Check that ref->next is NULL,
i.e. that the ARRAY_REF doesn't mention components.
* trans-array.c (gfc_constant_array_constructor_p): Export external
function renamed from constant_array_constructor_p.
(gfc_build_constant_array_constructor): Export.
(gfc_trans_array_constructor): Update call to the renamed function
constant_array_constructor_p.
* trans-array.h (gfc_constant_array_constructor_p): Prototype here.
(gfc_build_constant_array_constructor): Likewise.
* trans-expr.c (gfc_build_memcpy_call): New helper function split
out from gfc_trans_array_copy.
(gfc_trans_array_copy): Use gfc_build_memcpy_call.
(gfc_trans_array_constructor_copy): New function to optimize
assigning an entire array from a constant array constructor.
(gfc_trans_assignment): Call gfc_trans_array_constructor_copy
when appropriate.
* gfortran.dg/array_memcpy_3.f90: New test case.
* gfortran.dg/vect/vect-5.f90: Update vectorized loop count.
From-SVN: r121010
* trans-array.c (constant_array_constructor_p): New function to
determine whether an array constructor consists only of constant
elements, and if so return it's size.
(gfc_build_constant_array_constructor): Construct a statically
initialized gfortran array for a given EXPR_ARRAY.
(gfc_trans_constant_array_constructor): Efficiently scalarize
a constant array constructor.
(gfc_trans_array_constructor): Tidy up use of CONST_STRING.
Special case scalarization of constant array constructors, all of
whose elements are specified, using constant_array_constructor_p
and gfc_trans_constant_array_constructor.
(gfc_conv_scalarized_array_ref): Check whetger info->offset is zero
before adding it to index, to avoid creating a NON_LVALUE_EXPR.
* gfortran.dg/array_constructor_14.f90: New test case.
* gfortran.dg/vect/vect-5.f90: Update test for improved alignment.
From-SVN: r120584
