* final.c (shorten_branches): Clear the end of the label_align
array only if we made it larger. Break up messy expressions
for clarity.
* diagnostic.c (internal_error): Check for error recursion
before doing ICE suppression.
* timevar.c: Timing variables now count in milliseconds.
(init_timevar): Set up ticks_to_msec and clocks_to_msec here.
(get_time): Not here.
(timevar_print): Don't print any timer whose user, cpu, and
wall times are all zero as displayed.
* timevar.h: Update comment aboout units. Make timevar
counters unsigned.
From-SVN: r44948
2001-08-08 Jan van Male <jan.vanmale@fenk.wau.nl>
* emit-rtl.c (adjust_address, adjust_address_nv): Cast offset to
unsigned HOST_WIDE_INT to avoid warning.
* final.c (final): Cast INSN_UID to unsigned to avoid warning.
* flow.c (set_block_for_new_insns): Likewise.
From-SVN: r44724
* dwarf2out.c (dw_val_class_offset): New.
(struct dw_ranges_struct, dw_ranges_ref): New.
(ranges_table, ranges_table_allocated): New.
(ranges_table_in_use, RANGES_TABLE_INCREMENT): New.
(add_AT_offset, add_ranges, output_ranges): New.
(print_die, output_die): Handle dw_val_class_offset.
(attr_checksum, size_of_die, value_format): Likewise.
(gen_lexical_block_die): Handle non-contiguous blocks.
(gen_block_die): Likewise.
(dwarf2out_finish): Add a DW_AT_entry_pc to the compilation unit
if needed. Dump the ranges table.
* final.c (final_start_function): Remove unnecessary notes and
rebuild the block tree before numbering the blocks.
* function.c (reorder_blocks_0): Walk the existing block tree
to unmark all blocks.
(reorder_blocks_1): Create block fragments when duplicate block
notes are seen.
(reorder_fix_fragments): New.
(reorder_blocks): Call it.
* tree.h (BLOCK_FRAGMENT_ORIGIN, BLOCK_FRAGMENT_CHAIN): New.
From-SVN: r44444
* function.c (diddle_return_value): Kill code to determine
return value before expand_function_end.
(expand_function_end): Delay call to clobber_return_register
after fucntion return value is computed.
Re-install temporary reverted patch:
* toplev.c (rest_of_compilation): Call split_all_insns
before reg-stack and shorten-branches. Do shorten-branches
after reg-stack.
* final.c (shorten_branches): Remove insn splitting code.
From-SVN: r43044
* dbxout.c, mips-tfile.c, config/mips/mips.c, xcoffout.c:
Always include gstab.h, not system stab.h. Don't provide
default definitions of N_CATCH or N_OPT. Always use the
gstab.h variant of STAB_CODE_TYPE.
* final.c: Don't include stab.h/gstab.h at all, or provide
defaults for N_SLINE and N_SOL.
* xcoffout.c: Can assume N_MAIN, N_DSLINE, N_BSLINE, N_BINCL,
N_EINCL, N_EXCL, N_M2C, N_SCOPE, N_CATCH, and N_OPT are
available.
* sdbout.c: Always include gsyms.h instead of system syms.h.
* configure.in: No need to check for stab.h.
* configure, config.in: Regenerate.
* Makefile.in (final.o): Don't depend on gstab.h.
From-SVN: r41713
2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
* final.c: Revert back my previous changes.
* output.h: Make profile_label_no extern.
* config/rs6000/rs6000.c (output_profile_hook): Use standard functions
for generating label.
From-SVN: r39506
* final.c: Move the declaration profile_label_no to ...
* output.h: ... here.
* function.c (expand_function_start): Call PROFILE_HOOK.
* config/rs6000/aix.h: Define PROFILE_HOOK.
* config/rs6000/rs6000-protos.h: output_profile_hook new.
* config/rs6000/rs6000.c (output_profile_hook): Define.
(output_prolog): Do nothing for ABI_AIX as it is taken care by
output_profile_hook.
tm.texi : Explain new macro PROFILE_HOOK.
From-SVN: r39473
* final.c (output_addr_const) [LABEL_REF]: Simplify.
[MINUS]: Enclose non-CONST_INTs in parentheses.
[default]: Try OUTPUT_ADDR_CONST_EXTRA.
* tm.texi (OUTPUT_ADDR_CONST_EXTRA): Document it.
* varasm.c (decode_rtx_const) [CONST]: If it's not something
PLUS or MINUS a CONST_INT, use the whole CONST with offset 0
instead of abort()ing.
* sh.c (output_pic_addr_const): Removed. Fixed all callers.
* sh.h (OUTPUT_ADDR_CONST_EXTRA): New. Handle the UNSPECs
formerly handled in output_pic_addr_const.
* sh.md (sym_label2reg, symPLT_label2reg): Enclose UNSPEC
operands of MINUS in CONSTs so that decode_rtx_const() will
accept them.
From-SVN: r37691
* flags.h (flag_dump_rtl_in_asm): Declare.
* toplev.c (flag_dump_rtl_in_asm): Define.
(decode_d_option): Set flag_dump_rtl_in_asm and flag_print_asm_name
if -dP is specified.
* rtl.h (print_rtx_head): Declare.
* print-rtl.c (print_rtx_head): Define.
(print_rtx): Print the string pointed to by print_rtx_head
at beginning of each dump line.
(print_rtl): Likewise.
(print_rtl_single): Likewise.
* final.c (final_scan_insn): Dump the insn in the assembly
file for debugging.
* gcc.1: Document -dP option.
* invoke.texi (Debugging Options): Likewise.
From-SVN: r36394
* Makefile.in (INSN_ATTR_H): New macro. Replace all dependencies
on insn-attr.h with it.
* genattr.c: Generate `#include "insn-addr.h"' if HAVE_ATTR_length.
* insn-addr.h: New header.
(insn_addresses_): Renamed from insn_addresses.
(INSN_ADDRESSES_DEFN, INSN_ADDRESSES, INSN_ADDRESSES_ALLOC,
INSN_ADDRESSES_FREE, INSN_ADDRESSES_SET_P, INSN_ADDRESSES_SIZE,
INSN_ADDRESSES_NEW): New macros.
* genattrtab.c (write_test_expr): Use new macros.
* final.c (insn_addresses, init_insn_lengths): Likewise.
(align_fuzz, shorten_branches): Likewise.
(final): Likewise. Do not reject new insns if their addresses
have been added to INSN_ADDRESSES.
* config/arm/arm.c, config/avr/avr.c: Use new macros.
* config/h8300/h8300.c, config/i370/i370.c: Likewise.
* config/m88k/m88k.c, config/pa/pa.c, config/pa/pa.md: Likewise.
* config/sparc/sparc.c, config/sparc/sparc.md: Likewise.
* config/sh/sh.c: Likewise.
(output_branchy_insn): Use INSN_ADDRESSES_NEW.
From-SVN: r35307
* final.c (profile_function): Do not emit profile counters in
the data section, if NO_PROFILE_COUNTERS is defined.
* tm.texi: Document NO_PROFILE_COUNTERS. Update doc for
FUNCTION_PROFILER.
* config/i386/linux.h (NO_PROFILE_COUNTERS): Define.
(FUNCTION_PROFILER): Just emit a call to mcount.
From-SVN: r35005
2000-05-25 Andrew MacLeod <amacleod@cygnus.com>
Andrew Haley <aph@cygnus.com>
* except.c (func_eh_entry): Add emitted field.
(new_eh_region_entry): Set emitted field to 0;
(output_exception_table_entry): Only emit previously un-emitted data,
and send it to the eh_data section.
(output_exception_table): Break out common parts. Output
exception table for entire compilation unit to eh_data section.
(output_exception_table_data): Common parts of output_exception_table.
Send output to eh_data section.
(output_function_exception_table): Output exception table data for
a single function to eh_data section.
(free_exception_table): New external to free the table.
* except.h (free_exception_table): Add prototype.
(output_function_exception_table): Add prototype.
* final.c (final_end_function): Output function exception table
for IA64_UNWIND_INFO.
(final_scan_insn): Emit any unwind directives for an insn.
* frame-dwarf2.c: New file containing all DWARF 2 specific code
from frame.c.
* frame.c: Remove all DWARF 2 specific code.
* config/ia64/frame-ia64.c: New file.
(gthread_stuff): Make all gthread available with
IA64_UNWIND_INFO.
(dwarf_fde): Define an IA64 struct for dwarf_fde.
(__register_frame_info, __register_frame): Move to common area of file.
(__register_frame_info_table, __register_frame_table): Move to common i
area.
(__deregister_frame_info, __deregister_frame): Move to common area.
(__frame_init, find_fde): New versions for IA64_UNWIND_INFO.
(read_uleb128): New version for ia64.
(get_unwind_record): Read the next IA-64 unwind record.
(read_R_record): Read a region header record.
(process_a_b_reg_code): X record helper.
(read_X_record): Read an X format record.
(read_B_record): Read a B format record.
(P3_record_types): List of record types matching the P3 format.
(P7_record_types): List of record types matching the P7 format.
(P8_record_types): List of record types matching the P8 format.
(read_P_record): Read a P format record.
(init_ia64_reg_loc): Set default fields for a register.
(init_ia64_unwind_frame): Set defaults for all register records.
(execute_one_ia64_descriptor): Execute one descriptor record.
(rse_address_add): Calculate the position of a local reg in memory.
(normalize_reg_loc): Turn a location descriptor into a memory address.
(maybe_normalize_reg_loc): Only normalize a descriptor if it falls
within a specified PC offset range.
(get_real_reg_value): Given a register location, retrieve its value.
(set_real_reg_value): Change the value of a register location.
(copy_reg_value): Copy reg values, if needed.
(copy_saved_reg_state): Copy all registers that need to be copied.
(process_state_between): Normalize all frame register records that
fall within the specified PC range.
(frame_translate): Take a processed frame description, and turn
everything into addresses.
(build_ia64_frame_state ): Find and create frame state record for a PC.
(get_personality): Get the personality routine for a given frame.
(get_except_table): Get the exception table for a given frame.
(record_name): Unwind record names for debugging.
(print_record): Print and unwind record.
(print_all_records): Print an entire unwind image.
(__ia64_backtrace): Print a backtrace.
(ia64_backtrace_helper): New function.
(__register_frame_info_aux): New function.
* config/ia64/crtend.asm (__do_frame_setup_aux): New function.
* frame.h (enum unw_record_type): New unwind record types.
(struct unw_p_record, unw_b_record, unw_x_record) : New unwind records.
(struct unw_r_record, unwind_record): New unwind record structs.
(struct unwind_info_ptr): Unwind information layout.
(IA64_UNW_LOC_TYPE_*): Macros for different types for location
descriptors.
(struct ia64_reg_loc): Register location description.
(struct ia64_frame_state): Location of all registers in a frame.
(struct object): Add pc_base and fde_end for IA64_UNWIND_INFO.
* libgcc2.c (__ia64_personality_v1): Personality routine.
(__calc_caller_bsp): Calculate the bsp register for the caller's
frame.
(ia64_throw_helper): Figure out who to return to and set up the
registers.
(__throw): Throw routine.
* output.h (assemble_eh_align, assemble_eh_label): New functions
to generate EH info where we want it.
(assemble_eh_integer): New function.
* toplev.c (compile_file): Output module level exception table for
non-ia64 targets.
(main): Set exceptions_via_longjump and flag_new_exceptions based
on IA64_UNWIND_INFO too.
* varasm.c (assemble_eh_label): Generate a label via
ASM_OUTPUT_EH_LABEL if it has been specified.
(assemble_eh_align): Generate an alignment directive via
ASM_OUTPUT_EH_ALIGN if it has been specified.
(assemble_eh_label): Generate an integer value via
ASM_OUTPUT_EH_type if they have been specified.
* config/ia64/ia64.c (rtx_needs_barrier): Add flushrs.
(ia64_init_builtins): Add __builtin_ia64_bsp
and __builtin_ia64_flushrs.
(ia64_expand_builtin): Add IA64_BUILTIN_BSP and
IA64_BUILTIN_FLUSHRS.
* config/ia64/ia64.h (ia64_builtins): Add IA64_BUILTIN_BSP and
IA64_BUILTIN_FLUSHRS.
* config/ia64/ia64.md (flushrs): New insn to flush the register
stack. Add to unspec list.
* config/ia64/crtbegin.asm (frame_object): Change size.
(__do_frame_setup_aux): New function.
* config/ia64/crtend.asm: call __do_frame_setup_aux.
* config/ia64/t-ia64 (LIB2ADDEH): Add.
* Makefile.in (LIB2ADDEH): Add.
(LIB2ADD): Use LIB2ADDEH.
Co-Authored-By: Andrew Haley <aph@cygnus.com>
From-SVN: r34169
* final.c (final_scan_insn, case NOTE_INSN_FUNCTION_BEG): Remove
dangling "else" that causes "break" to be conditional.
Also remove unneeded code at start.
From-SVN: r34082
* diagnostic.c: Eliminate implicit int.
* except.c, gcc.c: Add static prototypes.
* final.c (final_end_function): Mark file arg ATTRIBUTE_UNUSED.
* gensupport.c (process_rtx): Use XVEC to initialize vector
slot of 'split'.
* print-rtl.c: If DEBUG_REGISTER_NAMES, define static
debug_reg_names instead of static reg_names. If not, define
global reg_names.
* regclass.c: Don't define global reg_names unless
DEBUG_REGISTER_NAMES is defined.
* reload1.c (order_regs_for_reload): Remove unused variable.
* varasm.c: Include output.h after defaults.h. Define
eh_frame_section as function of no args, not of unspecified args.
* gcc.c: Constify argbuf; arguments to store_arg,
process_command, main; elements of struct command and struct
switchstr; local variables in execute, process_command, main.
cp:
* except.c: Add static prototypes.
From-SVN: r34054
* print-rtl.c (print_rtx): Only print note line number as string
if between NOTE_INSN_BIAS and NOTE_INSN_MAX.
* final.c (final_scan_insn): Do nothing for note line number 0.
From-SVN: r33997
* Makefile.in (final.o): Depend on BASIC_BLOCK_H.
* final.c (final_end_function): Use app_disable. Rearrange note
handling into a switch. Emit deleted labels.
(output_asm_label): Generate label strings for deleted labels.
* flow.c (tail_recursion_label_list): New.
(find_basic_blocks_1): Set label_value_list directly. Collect list
of tail recursion labels from call_placeholders. Don't add deleted
labels to the label value list.
(cleanup_cfg): Use free_EXPR_LIST_list.
(flow_delete_insn_chain): Turn non-removable labels into notes.
(flow_delete_block): Don't disable deleting the block because of
a non-removable label.
(tail_recursion_label_p): New.
(merge_blocks_move_predecessor_nojumps): Don't disable the merge
because of a label.
(merge_blocks_move_successor_nojumps): Likewise. Also move a
jump table.
(merge_blocks): Disable a merge because of tail recursion labels.
* ifcvt.c (merge_if_block): Don't disable a merge because of a label.
Use a more accurate measure of not merging the join block.
(find_if_block): Don't disable conversion because of a label.
(find_if_case_1, find_if_case_2): Likewise.
* jump.c (duplicate_loop_exit_test): Preserve the kind of list
element when copying.
(squeeze_notes): Also leave EH notes.
(mark_jump_label): Ignore deleted labels. Use an INSN_LIST for
REG_LABEL notes.
(delete_insn): Preserve LABEL_NAME in NOTE_SOURCE_FILE when
deleting a label.
* print-rtl.c (print_rtx): Print NOTE_SOURCE_FILE for
NOTE_INSN_DELETED_LABEL. Print `[# deleted]' for a label_ref
referring to a deleted label. Convert tail handling to a switch.
* rtl.def (CODE_LABEL): Rearrange elements to be compatible with NOTE
for NOTE_INSN_DELETED_LABEL.
(NOTE): Fix commentary.
* rtl.h (REG_LABEL): Update commentary wrt INSN_LIST.
(REG_CC_SETTER, REG_CC_USER, REG_LIBCALL): Likewise.
(CODE_LABEL_NUMBER, LABEL_NAME): Update index.
(LABEL_NUSES, LABEL_REFS): Likewise.
* unroll.c (copy_loop_body): Don't copy NOTE_INSN_DELETED_LABEL.
From-SVN: r33876
* Makefile.in ($(srcdir)/c-parse.y: c-parse.in): Enclose the whole
message in quotes. Otherwise, IBM's make program treats the '#' as the
start of a comment and ignores the remainder of the line.
* c-lex.c (yylex): Change for EBCDIC, lower case characters preceed
upper case.
* cccp.c (initialize_char_syntax): Allow for holes in EBCDIC.
* cexp.y (initialize_random_junk): Likewise.
* cppfiles.c (find_include_file): Cast alloca return value.
* cppinit.c (initialize_standard_includes): Likewise.
* cpplib.c (cpp_define, cpp_undef): Likewise.
* defaults.h (ASM_OUTPUT_ASCII): Use ISPRINT.
* final.c (output_asm_insn): Allow for holes in EBCDIC.
* fold-const.c (CHARMASK): New.
(real_hex_to_f): Use it.
* real.c (CHARMASK): New.
(etoasc, asctoeg): Use it.
(asctoeg): EBCDIC lower case characters preceed upper case.
From-SVN: r33192
* final.c (final): Use xcalloc to allocate line_note_exists.
* function.c (free_after_compilation): Free the temp_slots.
(assign_stack_temp_for_type): Use xmalloc to allocate temp_slots.
(combine_temp_slot): Free temp_slots when they get combined.
(purge_addressof): Fix typo in comment.
* stmt.c (mark_goto_fixup): Mark the fixup itself.
(expand_fixup): Allocate the fixup with ggc_alloc_obj.
* ggc.h: Include varray.h.
(ggc_pending_trees): Declare.
(ggc_mark_tree_children): Remove declaration.
(ggc_mark_tree): Just push unmarked trees on ggc_pending_trees.
* ggc-common.c (ggc_pending_trees): New variable.
(ggc_mark_roots): Call ggc_mark_trees.
(ggc_mark_tree_children): Rename to ggc_mark_trees. Process all
the ggc_pending_trees.
* Makefile.in (GGC_H): New variable. Use it throughout in place
of ggc.h.
* Makefile.in (GGC_H): New variable. Use it throughout in place
of ggc.h.
* call.c: Don't include obstack.h. Include ggc.h.
(obstack_chunk_alloc): Don't define.
(obstack_chunk_free): Likewise.
(add_candidate): Allocate the z_candidate with ggc_alloc_obj.
* decl.c (push_switch): Use xmalloc to allocate the cp_switch.
(pop_switch): Free it.
* decl2.c (grokclassfn): Set TREE_READONLY for PARM_DECLs.
* dump.c (dequeue_and_dump): Don't try to print the bit_position
if we don't have a DECL_FIELD_OFFSET.
* Makefile.in (GGC_H): Add varray.h.
From-SVN: r32956
* sibcall.c (skip_copy_to_return_value): Use OUTGOING_REGNO for
comparison if regno's are equal.
* calls.c (initialize_argument_informat): Add ecf_flags argument.
Use FUNCTION_INCOMING_ARG if available and ECF_SIBCALL.
(expand_call): Update caller.
Avoid making a sibling call if argument size of the callee is larger
than argument size of the caller.
Call hard_function_value with outgoing set if in sibcall pass.
Use FUNCTION_INCOMING_ARG if available and ECF_SIBCALL.
* final.c (permitted_reg_in_leaf_functions, only_leaf_regs_used):
Change LEAF_REGISTERS from an array initializer to actual array
identifier. Move static global variable into the function.
(leaf_function_p): Allow SIBLING_CALL_P calls even outside of
sequences for leaf functions.
* global.c (global_alloc): Likewise.
* tm.texi (LEAF_REGISTERS): Update documentation.
* config/sparc/sparc.h (CONDITIONAL_REGISTER_USAGE): Remove the ugly
TARGET_FLAT leaf disabling hack.
(LEAF_REGISTERS): Changed from an array initializer to actual array
identifier to avoid duplication and remove the above hack.
(FUNCTION_OK_FOR_SIBCALL): Define.
* config/sparc/sparc.md (sibcall): New attr type. Use it almost
always like call attribute.
(eligible_for_sibcall_delay): New attribute.
(sibcall): New delay type.
(sibcall, sibcall_value, sibcall_epilogue): New expands.
(sibcall_symbolic_sp32, sibcall_symbolic_sp64,
sibcall_value_symbolic_sp32, sibcall_value_symbolic_sp64): New insns.
* config/sparc/sparc.c (sparc_leaf_regs): New array.
(eligible_for_sibcall_delay, output_restore_regs, output_sibcall):
New functions.
(output_function_epilogue): Move part of the code into
output_restore_regs.
(ultra_code_from_mask, ultrasparc_sched_reorder): Handle
TYPE_SIBCALL.
* sparc-protos.h (output_sibcall, eligible_for_sibcall_delay): New
prototypes.
From-SVN: r32730
* dwarf2out.c (dwarf2out_frame_debug): Add cast to silence warning.
(dwarf2out_decl): Functions can now have DECL_IGNORED_P.
(gen_decl_die): Likewise.
* dwarfout.c (dwarfout_file_scope_decl): Likewise.
(output_decl): Likewise.
* varasm.c (make_function_rtl): If we change the name used in the
rtl, update DECL_ASSEMBLER_NAME accordingly.
(make_decl_rtl): Likewise.
* toplev.c (rest_of_compilation): Tweak formatting.
* toplev.c (rest_of_compilation): find_loop_tree_blocks before
remove_unnecessary_notes.
(debug_ignore_block): New fn.
* toplev.h: Declare it.
* emit-rtl.c (remove_unncessary_notes): Call it.
* dwarf2out.c (dwarf2out_ignore_block): New fn.
* dwarf2out.h: Declare it.
* final.c (final_start_function): Don't call remove_unnecessary_notes
if we did insn scheduling.
From-SVN: r32320
* emit-rtl.c (remove_unncessary_notes): Remove notes for empty
blocks.
* final.c (next_block_index): Remove.
(max_block_depth): Likewise.
(pending_blocks): Likewise.
(init_final): Don't initialize them.
(final_start_function): Don't set next_block_index. Set up
BLOCK_NUMBER.
(final_scan_insn): Use BLOCK_NUMBER, not next_block_index.
* function.h (number_blocks): New function.
* function.c (get_block_vector): New function.
(identify_blocks): Use it.
(reorder_blocks): Set NOTE_BLOCK.
(number_blocks): New function.
* tree.def (BLOCK): Add documentation for TREE_ASM_WRITTEN flag.
* tree.h (BLOCK_NUMBER): New macro.
(tree_block): Add block_num field.
* dbxout.c (next_block_number): Remove.
(dbxout_init): Don't set it.
(dbxout_block): Only output blocks that have TREE_ASM_WRITTEN
set. Use BLOCK_NUMBER, rather than next_block_num, to determine
block numbers.
* toplev.c (rest_of_compilation): Always call
find_loop_tree_blocks. Fix indentation.
* dwarf2out.c (next_block_number): Remove.
(gen_lexical_block_die): Use BLOCK_NUMBER, not next_block_number,
to determine block numbers.
(gen_inlined_subroutine_die): Likewise.
(gen_block_die): Only output blocks that have TREE_ASM_WRITTEN set.
(decls_for_scope): Don't increment next_block_number.
* dwarfout.c (next_block_number): Remove.
(output_lexical_block_die): Use BLOCK_NUMBER, not next_block_number,
to determine block numbers.
(output_inlined_subroutine_die): Likewise.
(output_block): Only output blocks that have TREE_ASM_WRITTEN set.
(output_decls_for_scope): Don't increment next_block_number.
* sdbout.c (next_block_number): Remove.
(sdbout_block): Use BLOCK_NUMBER.
(sdbout_begin_block): Simplify.
* xcoffout.c (next_block_number): Remove.
(xcoffout_block): Use BLOCK_NUMBER, not next_block_number.
(xcoffout_begin_block): Don't set next_block_number.
(xcoffout_begin_function): Likewise. Use BLOCK_NUMBER, not
next_block_number.
From-SVN: r32228
* final.c (shorten_branches): Make value passed to LABEL_ALIGN
conform to documentation.
* sh.h (LABEL_ALIGN): If aligning loops, call sh_label_align
to check for special cases.
* sh-protos.h (sh_label_align): Declare.
* sh.c (sh_label_align): Define.
From-SVN: r32114
* flags.h: New variables align_loops, align_loops_log,
align_jumps, align_jumps_log, align_labels, align_labels_log,
align_functions, align_functions_log.
* toplev.c: Define them.
(f_options): Handle -falign-* when they have no argument.
(main): Add logic to set variables for -falign-functions,
-falign-jumps, -falign-labels, -falign-loops.
Make it -fsched-verbose=<n> and -finline-limit=<n>.
(display_help): Change help to match options.
* final.c (LABEL_ALIGN): Default to align_labels_log.
(LABEL_ALIGN_MAX_SKIP): Default to align_labels-1.
(LOOP_ALIGN): Default to align_loops_log.
(LOOP_ALIGN_MAX_SKIP): Default to align_loops-1.
(LABEL_ALIGN_AFTER_BARRIER): Default to align_jumps_log.
(LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP): Default to align_jumps-1.
* varasm.c (assemble_start_function): Handle align_functions.
* config/sparc/sparc.h: Don't declare sparc_align_*.
Don't provide LABEL_ALIGN_AFTER_BARRIER or LOOP_ALIGN.
(DEFAULT_SPARC_ALIGN_FUNCS): Delete; take functionality into
sparc.c.
(FUNCTION_BOUNDARY): Fix incorrect use---it's not just a request,
it's a promise.
* config/sparc/sparc.c: Delete sparc_align_loops,
sparc_align_jumps, sparc_align_funcs and the corresponding string
variables.
(sparc_override_options): Default align_functions on ultrasparc.
Delete -malign-* handling.
* config/mips/mips.c (override_options): On 64-bit targets,
try to align code to 64-bit boundaries.
(print_operand): New substitution, %~,
which aligns labels to align_labels_log.
* config/mips/mips.md (div_trap_normal): Use %~.
(div_trap_mips16): Likewise.
(abssi): Likewise.
(absdi2): Likewise.
(ffssi2): Likewise.
(ffsdi2): Likewise.
(ashldi3_internal): Likewise.
(ashrdi3_internal): Likewise.
(lshrdi3_internal): Likewise.
(casesi_internal): Likewise.
Plus corresponding documentation changes.
From-SVN: r29045
Merge peephole2 from new_ia32_branch:
* Makefile.in (STAGESTUFF): Add *.peephole2.
(mostlyclean): Likewise.
(recog.o): Depend on resource.h.
* final.c (peephole): Conditionalize decl on HAVE_peephole.
(final_scan_insn): Likewise for the invocation of peephole.
* genconfig.c (main): Look for peephole and peephole2 patterns.
Emit HAVE_peephole* accordingly.
* genpeep.c (main): Conditionalize entire output on HAVE_peephole.
* flags.h (flag_peephole2): Declare.
* toplev.c: New pass peephole2. New flag -fpeephole2.
* genattrtab.c (main): Count DEFINE_PEEPHOLE2.
* gencodes.c (main): Likewise.
* genextract.c (main): Likewise.
* genoutput.c (main): Likewise.
* genemit.c (max_operand_1): Look for the max scratch operand.
(gen_rtx_scratch): New.
(gen_exp): Use it, and pass on new arg subroutine_type.
(gen_expand): Take max scratch into account.
(gen_split): Emit peephole2 functions.
(output_peephole2_scratch): New.
(main): Include hard-reg-set.h and resource.h. Handle peephole2.
* genrecog.c (routine_type): Add PEEPHOLE2.
(IS_SPLIT): New.
(make_insn_sequence): Match outer parallel for peep2. Discard
top level scratches and dups.
(add_to_sequence): New args insn_type and top. Update all callers.
Handle toplevel peep2 matching insns.
(write_subroutine): Handle peep2.
(write_tree_1): Likewise.
(write_tree): Likewise.
(main): Likewise.
(change_state): New arg afterward. Update all callers.
Handle matching separate insns.
* recog.c (recog_next_insn): New.
(peephole2_optimize): New.
* rtl.def (DEFINE_PEEPHOLE2): New.
* resource.c (find_free_register): New argument last_insn. Use it
to find a register available through the entire span.
* resource.h (find_free_register): Update prototype.
From-SVN: r29015
1999-08-31 12:20 -0700 Zack Weinberg <zack@bitmover.com>
* rtl.h (RTL_CHECK1, RTL_CHECK2): New macros which type- and
bounds- check RTL accesses if --enable-checking.
(RTVEC_ELT): Bounds check if --enable-checking.
(XWINT, XINT, XSTR, XEXP, XVEC, XMODE, XBITMAP, XTREE,
XBBDEF): Use RTL_CHECK1/RTL_CHECK2 as appropriate.
(XVECEXP, XVECLEN): Define in terms of XVEC, RTVEC_ELT, and
GET_NUM_ELEM.
(X0WINT, X0INT, X0STR, X0EXP, X0VEC, X0MODE, X0BITMAP, X0TREE,
X0BBDEF, X0ADVFLAGS): New macros for accessing '0' slots of RTXes.
(ADDR_DIFF_VEC_FLAGS): Use X0ADVFLAGS.
(NOTE_SOURCE_FILE): Use X0STR.
(NOTE_BLOCK_NUMBER, NOTE_EH_HANDLER, LABEL_NUSES,
MEM_ALIAS_SET): Use X0INT.
(NOTE_RANGE_INFO, NOTE_LIVE_INFO, NOTE_BASIC_BLOCK,
JUMP_LABEL, LABEL_REFS, LABEL_NEXTREF, CONTAINING_INSN):
Use X0EXP.
* real.h (CONST_DOUBLE_CHAIN): Use X0EXP.
* rtl.c (copy_rtx, copy_most_rtx): Copy '0' slots with X0WINT.
(rtl_check_failed_bounds, rtl_check_failed_type1,
rtl_check_failed_type2, rtvec_check_failed_bounds): New
functions.
(fancy_abort): Fix comment.
* cse.c (canon_hash): Read CONST_DOUBLE data slots with XWINT.
(cse_insn): Decrement LABEL_NUSES for jump target before
deleting jump insn.
* emit-rtl.c (gen_rtx_CONST_DOUBLE): Use X0EXP for slot 1.
* final.c (alter_subreg): Compute regno before changing x to
REG; set REGNO(x) after changing it.
* flow.c (count_basic_blocks): Use XWINT to inspect EH_REGION
notes containing CONST_INTs.
(delete_eh_regions): Use NOTE_EH_HANDLER.
* function.c (put_reg_into_stack): Make reg a MEM before
initializing it.
(fixup_var_refs_insns): Save REG_NOTES (insn) in case we
delete insn.
(gen_mem_addressof): Make reg a MEM before initializing it.
* integrate.c (copy_rtx_and_substitute): Copy '0' slots with
X0WINT.
* local-alloc.c (update_equiv_regs): Zap REG_NOTES before
deleting an insn, not after.
(block_alloc): Only look at PATTERN(insn) if we have to, and
only if it's format class 'i'.
* loop.c (check_dbra_loop): Check bl->biv->add_val is a
CONST_INT before using its INTVAL.
* print-rtl.c (print_rtx): Use X0STR.
* regmove.c (fixup_match_1): Don't look at PATTERN of
non-class-'i' insn chain elements.
* reload.c (loc_mentioned_in_p): Take address of
in->fld[1].rtx directly.
* reload1.c (reload): Change reg to a MEM before initializing
it.
* varasm.c (mark_constant_pool): Skip CONST_DOUBLES, which
have no names.
* config/i386/i386.md (decrement_and_branch_if_zero): Fix typo.
From-SVN: r29008
1999-08-25 22:10 -0700 Zack Weinberg <zack@bitmover.com>
* system.h: Don't redefine abort or trim_filename.
* rtl.h: Define abort to fancy_abort (__FILE__, __LINE__, 0)
or fancy_abort (__FILE__, __LINE__, __FUNCTION__) depending on
whether or not __FUNCTION__ is available.
* tree.h: Duplicate rtl.h's definition of abort, for files
that don't include rtl.h. Delete all code to perform type
checking with a compiler other than GCC.
* varray.h: Delete all code to perform type checking with a
compiler other than GCC. Make VARRAY_CHECK() always evaluate
its arguments exactly once, using a statement expression.
Adjust the VARRAY_<type> accessor macros to match.
* toplev.h (fatal_insn, fatal_insn_not_found): Kill.
(_fatal_insn, _fatal_insn_not_found): New fns, take info on
caller's location. Define fatal_insn and fatal_insn_not_found
as macros that use _fatal_insn and _fatal_insn_not_found.
(fancy_abort, trim_filename): Kill prototypes.
* rtl.c (trim_filename): Move here from toplev.c.
(fancy_abort): New function.
(DIR_SEPARATOR): Provide default definition.
* tree.c (tree_check_failed, tree_class_check_failed): Go
through fancy_abort.
(tree_check, tree_class_check, cst_or_constructor_check,
expr_check): Delete.
* varray.c (varray_check_failed): New function.
* toplev.c (fatal_insn, fatal_insn_not_found): Replace with
_fatal_insn and _fatal_insn_not_found. Go through
fancy_abort.
(trim_filename, fancy_abort): Delete.
* builtins.c (expand_builtin_args_info): Report ICE with abort.
* except.c (start_catch_handler): Report ICE with error/abort
combo.
* final.c (output_operand_lossage): Likewise.
* flow.c (verify_flow_info): Likewise.
* gcc.c: Prototype fatal.
* gengenrtl.c: Undef abort after including rtl.h not system.h.
* genattr.c, genattrtab.c, genemit.c, genextract.c,
genflags.c, genopinit.c, genoutput.c, genpeep.c, genrecog.c:
Don't define fancy_abort.
From-SVN: r28889
* calls.c (emit_call_1): Mark parameter `stack_size' with
ATTRIBUTE_UNUSED.
(expand_call): Initialize variable `insn'.
(emit_library_call): Likewise for variable `high_to_save'.
(emit_library_call_value): Likewise.
(store_one_arg): Likewise for variables `lower_bound' and
`upper_bound'.
* combine.c (try_combine): Likewise for variables `i2_code_number'
and `other_code_number'.
(find_split_point): Likewise for variables `pos', `unsignedp' and
`inner'.
(simplify_if_then_else): Likewise for variables `op' and `c1'.
(simplify_and_const_int): Remove unused variable `width'.
(merge_outer_ops): Likewise.
* cse.c (simplify_binary_operation): Cast an INTVAL() to `unsigned
HOST_WIDE_INT' when comparing against one.
(simplify_relational_operation): Likewise.
(cse_insn): Initialize variables `src_eqv_volatile',
`src_eqv_in_memory', `src_eqv_in_struct', `src_eqv_hash' and `sets'.
* final.c (init_final): Constify parameter `filename'.
(final_start_function): Mark parameter `optimize' with
ATTRIBUTE_UNUSED.
(profile_function): Likewise for parameters `first' and `optimize'.
(output_source_line): Likewise for parameter `file'.
* integrate.c (subst_constants): Cast a value to `size_t' when
comparing against one.
(mark_stores): Initialize variable `mode'. Cast a value to
`size_t' when comparing against one.
* integrate.h (MAYBE_EXTEND_CONST_EQUIV_VARRAY): Likewise.
* loop.c (move_movables): Initialize variable `first'.
(strength_reduce): Likewise for variable `increment'.
(check_dbra_loop): Likewise for variable `comparison_val'. Cast a
value to `size_t' when comparing against one.
(load_mems): Initialize variable `end_label'.
* output.h (init_final): Constify parameter.
* reload.c (decompose): Initialize variable `base'.
* reload1.c (reload): Likewise for variable `is_scalar'.
(spill_hard_reg): Mark parameter `dumpfile' with ATTRIBUTE_UNUSED.
(choose_reload_regs): Initialize variable `mode'.
(emit_reload_insns): Likewise for variable `store_insn'.
(reload_cse_noop_set_p): Mark parameter `insn' with
ATTRIBUTE_UNUSED.
(reload_combine): Initialize variable `set'.
* unroll.c (unroll_loop): Likewise for variable `local_label'.
(copy_loop_body): Cast a value to `size_t' when comparing against
one.
* varasm.c (assemble_variable): Initialize variable `size_tree'.
(const_hash): Add an `else abort()' in an if-else-if-else sequence.
(remove_from_pending_weak_list): Mark parameter `name' with
ATTRIBUTE_UNUSED.
From-SVN: r28860
Include function.h in most files. Remove most of the global variables
duplicated in function.h. Add accessor macros for them which access
current_function. Delete INLINE_HEADER rtx and related code, replace
with code using struct function to store inlining related data.
From-SVN: r28626
* sh.md (insv): Use copy_addr_to_reg.
* final.c (insn_lengths_max_uid) New variable.
(init_insn_lengths, shorten_branches): Set it.
(get_attr_lengths): Test insn uid against insn_lengths_max_uid.
From-SVN: r26676
Mon Mar 22 10:44:33 1999 Vladimir Makarov <vmakarov@tofu.to.cygnus.com>
* config/h8300/h8300.md (adjust_length): New attribute.
(modhi3+1, andsi3+1, iorsi3+1, extzv+1, extzv+2): Change insn
default value of attribute "adjust_length" onto "no".
* config/h8300/h8300.c (h8300_adjust_insn_length): Use 0 if the
shift is negative.
* final.c (shorten_branches): Check insn length after its
adjusting.
From-SVN: r25895
* alias.c (record_alias_subset): Remove ignored `&'.
(init_alias_once): Likewise.
* c-lex.c (UNGETC): Cast first argument of comma expression to void.
* config/mips/mips.c (mips_asm_file_end): Cast the result of
fwrite to `int' when comparing against one.
* config/mips/mips.h (CAN_ELIMINATE): Add parens around && within ||.
(INITIAL_ELIMINATION_OFFSET): Add braces to avoid ambiguous `else'.
* cse.c (rehash_using_reg): Change type of variable `i' to
unsigned int.
* dwarf2out.c (initial_return_save): Cast -1 to unsigned before
assigning it to one.
* except.c (duplicate_eh_handlers): Remove unused variable `tmp'.
* final.c (final_scan_insn): Likewise for variable `i'.
(output_asm_insn): Cast a char to unsigned char when used as an
array index.
* gcse.c (compute_pre_ppinout): Cast -1 to SBITMAP_ELT_TYPE when
assigning it to one.
* loop.c (strength_reduce): Remove unused variables `count' and `temp'.
* recog.c (preprocess_constraints): Cast a char to unsigned char
when used as an array index.
* regmove.c (find_matches): Likewise.
* reload1.c (calculate_needs): Add default case in switch.
(eliminate_regs_in_insn): Initialize variable `offset'.
(set_offsets_for_label): Change type of variable `i' to unsigned.
(reload_as_needed): Wrap variable `i' in macro check on
AUTO_INC_DEC || INSN_CLOBBERS_REGNO_P.
* scan-decls.c (scan_decls): Mark parameters `argc' and `argv'
with ATTRIBUTE_UNUSED. Cast variable `start_written' to size_t
when comparing against one.
* stor-layout.c (layout_decl): Cast maximum_field_alignment to
unsigned when comparing against one. Likewise for
GET_MODE_ALIGNMENT().
(layout_record): Cast record_align to int when comparing against a
signed value.
(layout_type): Cast TYPE_ALIGN() to int when comparing against a
signed value.
* tree.c (get_identifier): Cast variable `len' to unsigned when
comparing against one.
(maybe_get_identifier): Likewise
From-SVN: r24403
* final.c (cleanup_subreg_operands): Delete some unused code.
* recog.h (MAX_RECOG_ALTERNATIVES): New macro.
(struct insn_alternative): New structure definition.
(recog_op_alt): Declare variable.
(preprocess_constraints): Declare function.
* recog.c (recog_op_alt): New variable.
(extract_insn): Verify number of alternatives is in range.
(preprocess_constraints): New function.
* reg-stack.c: Include recog.h.
(constrain_asm_operands): Delete.
(get_asm_operand_lengths): Delete.
(get_asm_operand_n_inputs): New function.
(record_asm_reg_life): Delete OPERANDS, CONSTRAINTS, N_INPUTS and
N_OUTPUTS args. All callers changed.
Compute number of inputs and outputs here by calling
get_asm_operand_n_inputs.
Instead of constrain_asm_operands, call extract_insn,
constrain_operands and preprocess_constaints. Use information
computed by these functions throughout.
(record_reg_life): Delete code that is unused due to changes in
record_asm_reg_life.
(subst_asm_stack_regs): Delete OPERANDS, OPERAND_LOC, CONSTRAINTS,
N_INPUTS and N_OUTPUTS args. All callers changed.
Similar changes as in record_asm_reg_life.
(subst_stack_regs): Move n_operands declaration into the if statement
where it's used.
Delete code that is unused due to changes in subst_asm_stack_regs.
* stmt.c (expand_asm_operands): Verify number of alternatives is in
range.
* Makefile.in (reg-stack.o): Depend on recog.h.
From-SVN: r24090
* recog.h (enum op_type): Define.
(constrain_operands): Adjust prototype.
(recog_op_type): Declare new variable.
* recog.c (recog_op_type): New variable.
(insn_invalid_p): Allow modifying an asm statement after reload.
(extract_insn): Set up recog_op_type.
(constrain_operands): Lose INSN_CODE_NUM arg. All callers changed.
Don't compute operand types, use recog_op_type.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* caller-save.c (init_caller_save): Use extract_insn, not insn_extract.
* reorg.c (fill_slots_from_thread): Likewise.
* reload1.c (reload_as_needed): Likewise.
(gen_reload): Likewise.
(inc_for_reload): Likewise.
(reload_cse_simplify_operands): Likewise.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* genattrtab.c (write_attr_case): Generate call to extract_insn, not
insn_extract.
* final.c (final_scan_insn): Use extract_insn, not insn_extract.
(cleanup_operand_subregs): Use extract_insn, not insn_extract.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* regmove.c (find_matches): Likewise. Change meaning of the return
value to be nonzero if the optimization can be performed, zero if
not. All callers changed.
Shorten some variable names to fix formatting problems.
(regmove_optimize): Shorten some variable names to fix formatting
problems.
Use the information computed by extract_insn instead of the previous
method of finding it by insn code number.
* regclass.c (scan_one_insn): Likewise.
(record_reg_classes): Don't compute operand types, use recog_op_type.
* reload.c (find_reloads): Lose CONSTRAINTS1 variable; use
recog_constraints instead.
From-SVN: r23529
* Makefile.in (cc1): Put C_OBJS, and thence @extra_c_objs@ last.
(LIBCPP_OBJS): New. Add cppulp.o.
(cppmain, fix-header): Depend on and use libcpp.a.
* configure.in (extra_c_objs, extra_cxx_objs): Use libcpp.a instead
of the individual object files.
* objc/Make-lang.in (cc1obj): Put OBJC_OBJS, and thence @extra_c_objs@,
last.
* cccp.c (user_label_prefix): New.
(main): Set it off -f*leading-underscore.
(special_symbol): Use it.
* cpplib.c (special_symbol): Likewise.
(cpp_handle_option): Handle -f*leading-underscore.
* cppulp.c: New file.
* output.h (user_label_prefix): Declare it.
* dwarf2out.c (ASM_NAME_TO_STRING): Prepend user_label_prefix.
* toplev.c (f_options, main): Handle -f*leading-underscore.
* defaults.h (ASM_OUTPUT_LABELREF): Use asm_fprintf instead of
referencing USER_LABEL_PREFIX directly.
* config/nextstep.h (ASM_OUTPUT_LABELREF): Likewise.
* m32r/m32r.h (ASM_OUTPUT_LABELREF): Likewise.
* final.c (asm_fprintf): Use user_label_prefix instead.
* arm/thumb.c (thumb_print_operand): Likewise.
* gcc.c (default_compilers): Pass -f*leading-underscore on to
cpp wherever appropriate.
From-SVN: r23415
* final.c (cleanup_subreg_operands): New function.
(final_scan_insn): Use it.
(alter_subreg): Clear the "used" field when we turn a SUBREG into
a REG.
* reload1.c (reload): Delete CLOBBER insns and also cleanup SUBREG
operands when reload has finished.
* reload.h (cleanup_subreg_operands): Declare..
* flow.c (life_analysis_1): No longer delete CLOBBER insns after
reload. Handled in reload itself.
Should fix sh, sparc and probably other problems with post-reload life pass
and scheduling interactions.
From-SVN: r23377
* Makefile.in (recog.o): Depend on toplev.h.
(insn-emit.o): Depend on recog.h.
(insn-peep.o): Depend on recog.h and insn-config.h.
* combine.c (simplify_set): Remove unused variable `scratches'.
* final.c (final_scan_insn): Wrap declaration of variables `vlen'
and `idx' in macro conditional controlling their use.
* genemit.c (main): Make the generated output file include
recog.h. Don't have it declare `insn_operand_constraint', since
we get it from recog.h.
* genpeep.c (main): Make the generated output file include
insn-config.h and recog.h.
* recog.c: Include toplev.h.
(extract_insn): Remove unused variable `p'.
* regclass.c (fix_register): Add missing braces around initializer
for `what_option'.
(allocate_reg_info): Move variable `i' into the scope where it is
used. Change its type to `size_t'.
From-SVN: r23307
d
* final.c (final): If a label is reached only from a single jump,
call NOTICE_UPDATE_CC on the jump and its predecessor before
emitting the insn after the label.
* i386.h: Add AMD K6 support.
Change TARGET_* macros to use table lookup.
(INITIALIZE_TRAMPOLINE): Improve trampoline code.
(ADJUST_COST): Change definition to call function in i386.c.
(ISSUE_RATE): Define as 2 for anything newer than an 80486.
* i386.c: Add AMD K6 support.
Add constants for feature tests used by TARGET_* macros.
(split_di): If before reload, call gen_lowpart and gen_highpart.
(x86_adjust_cost): New function.
(put_jump_code): New function.
(print_operand): New codes 'D' and 'd'.
* i386.md: New insn types. New insn attribute "memory".
Redefine scheduling parameters to use new types and add AMD K6
support. Explicitly set type of most insns.
(move insns): K6 prefers movl $0,reg to xorl reg,reg. Pentium
Pro and K6 prefer movl $1,reg to incl reg.
(adddi3, subdi3): Set cc_status.
(DImode shift patterns): Change label counters from HOST_WIDE_INT
to int; x86 can't have more than 2^31 DImode shifts per file.
(setcc): Combine all setcc patterns. Allow writing memory.
Combine all jump patterns using match_operator.
(*bzero): Name pattern. Emit mutliple stos instructions when that
is faster than rep stos.
(xordi3, anddi3, iordi3): Simplify DImode logical patterns and
add define_split.
* ch/Make-lang.in: Comment ^L characters. Sun make doesn't like them.
From-SVN: r22290
* regclass.c: Changed register set documentation to be consistent
with GCC behaviour.
* final.c (final_start_function) Removed redundant test for
call_fixed_regs.
From-SVN: r21847
* invoke.texi (-fstrict-aliasing): Document.
* rtl.texi (MEM_ALIAS_SET): Document.
* flags.h (flag_strict_aliasing): Declare.
* toplev.c (flag_strict_aliasing): Define.
(f_options): Add -strict-aliasing.
(main): Set flag_strict_aliasing if -O2 or higher.
* tree.h (tree_type): Add alias_set field.
(TYPE_ALIAS_SET): New macro.
(TYPE_ALIAS_SET_KNOWN_P): Likewise.
(get_alias_set): Declare.
* tree.c (lang_get_alias_set): Define.
(make_node): Initialize TYPE_ALIAS_SET.
(get_alias_set): New function.
* print-tree.c (print_node): Dump the alias set for a type.
* c-tree.h (c_get_alias_set): Declare.
* c-common.c (c_get_alias_set): New function.
* c-decl.c (init_decl_processing): Set lang_get_alias_set.
* expr.c (protect_from_queue): Propogage alias sets.
(expand_assignment): Calculate alias set for new MEMs.
(expand_expr): Likewise.
* function.c (put_var_into_stack): Likewise.
(put_reg_into_stack): Likewise.
(gen_mem_addressof): Likewise.
(assign_parms): Likewise.
* stmt.c (expand_decl): Likewise.
* varasm.c (make_decl_rtl): Eliminate redundant clearing of
DECL_RTL. Calculate alias set for new MEMs.
* rtl.def (REG): Add dummy operand.
(MEM): Add extra operand to store the MEM_ALIAS_SET.
* rtl.h (MEM_ALIAS_SET): New macro.
(gen_rtx_MEM): Declare.
* emit-rtl.c (gen_rtx_MEM): New function.
* gengenrtl.c (sepcial_rtx): Make MEMs special.
* alias.c (CHECK_ALIAS_SETS_FOR_CONSISTENCY): New macro.
(DIFFERENT_ALIAS_SETS_P): Likewise.
(canon_rtx): Propogate the alias set to the new MEM.
(true_dependence): Check the alias sets.
(anti_dependence): Likewise.
(output_dependence): Likewise.
* explow.c (stabilize): Progoate alias sets.
* integrate.c (copy_rtx_and_substitute): Likewise.
* final.c (alter_subreg): Make sure not to leave MEM_IN_STRUCT_P
in an unpredictable state. Propogate alias sets.
* reload1.c (reload): Clear MEM_ALIAS_SET for new MEMs about which
we have no alias information.
From-SVN: r20719
* Makefile.in (varasm.o): Depend on sdbout.h.
(sdbout.o): Depend on toplev.h.
* collect2.c (scan_prog_file): Cast fprintf argument to `long' and
use %ld specifier.
* final.c (shorten_branches): Cast first arg of `bzero' to char *.
* genextract.c (main): When creating insn-extract.c, mark variable
`i' with ATTRIBUTE_UNUSED.
* genpeep.c (main): When creating insn-peep.c, mark variables
`insn', `x' and `pat' with ATTRIBUTE_UNUSED.
* objc/init.c (__objc_tree_print): Wrap function definition in
macro `DEBUG'.
* objc/objc-act.c (encode_array): Cast sprintf argument to `long'
and use %ld specifier.
(adorn_decl): Likewise, twice.
From-SVN: r20650
* Makefile.in (varasm.o): Depend on dbxout.h.
(cse.o): Depend on toplev.h and output.h.
(gcse.o): Depend on output.h.
* mips.c: Include system.h and toplev.h and remove redundant code.
Include output.h after tree.h so all its prototypes get activated.
* mips.md (table_jump): Remove unused variable `dest'.
* sparc.h: Add prototype for `v8plus_regcmp_op'.
* crtstuff.c (fini_dummy, init_dummy): Mark function definitions
with __attribute__ ((__unused__)).
(__frame_dummy): Provide prototype before use, wrap it with
EH_FRAME_SECTION_ASM_OP.
* cse.c: Move inclusion of <setjmp.h> above local headers.
Include toplev.h and output.h.
* dbxout.h: Add prototype for `dbxout_begin_function'.
* final.c (final_scan_insn): Wrap variable `max_skip' in macro
ASM_OUTPUT_MAX_SKIP_ALIGN.
* gcse.c: Include system.h and output.h.
(dump_cuid_table, dump_rd_table, dump_cprop_data, dump_pre_data):
Make extern instead of static.
(compute_can_copy): Only declare variables `reg' and `insn' when
AVOID_CCMODE_COPIES is not defined.
(record_set_info): Mark parameter `setter' with ATTRIBUTE_UNUSED.
(hash_scan_clobber): Likewise for `x' and `insn'.
(hash_scan_call): Likewise.
(record_last_set_info): Likewise for `setter'.
(mark_call): Likewise for `pat'.
(pre_insert_insn): Wrap variable `note' in macro HAVE_cc0.
* libgcc2.c (__bb_init_prg): Replace bzero with memset and fix the
length parameter so that it multiplies the number of elements by
the sizeof(element).
* output.h: Add prototype for `weak_finish'.
* recog.h: Likewise for `validate_replace_src'.
* rtl.h: Likewise for `optimize_save_area_alloca',
`fix_sched_param', `purge_addressof', `gcse_main',
`regmove_optimize', `dbr_schedule', `branch_prob' and
`end_branch_prob'.
* toplev.h: Likewise for `set_float_handler' and
`output_quoted_string'.
* varasm.c: Include dbxout.h.
From-SVN: r20351
Thu Jun 8 14:16:15 EDT 1998 Andrew MacLeod <amacleod@cygnus.com>
* eh-common.h: Remove NEW_EH_MODEL compile time flag, and replace with
flag_new_exceptions runtime flag.
(struct old_exception_table): New struct which represents what
the exception table looks like without the new model.
(NEW_EH_RUNTIME): New value used as a tag in the exception table to
flag that this is a new style table.
* except.h: Remove compile time flag NEW_EH_MODEL.
(expand_builtin_eh_stub_old): New prototype.
* tree.h (enum built_in_function): Add BUILT_IN_EH_STUB_OLD.
* expr.c (expand_builtin): New builtin func BUILT_IN_EH_STUB_OLD.
* c-decl.c (init_decl_processing): Add new builtin function
__builtin_eh_stub_old.
* final.c (final_scan_insn): Replace compile time flag NEW_EH_MODEL.
* flags.h (flag_new_exceptions): New runtime flag.
* toplev.c (flag_new_exceptions): Initialize default to 0,
-fnew-exceptions sets to 1.
* except.c (output_exception_table_entry): Output New style exception
identifier into table, and replace compile time flag NEW_EH_MODEL
with runtime flag flag_new_exceptions.
(output_exception_table): Replace compile time flag NEW_EH_MODEL.
(expand_builtin_eh_stub_old): Duplicates original functionality of
expand_builtin_eh_stub.
(expand_builtin_eh_stub): Replace compile time flag NEW_EH_MODEL.
* libgcc2.c (find_exception_handler): Remove NEW_EH_MODEL #ifdefs.
(old_find_exception_handler): New func, same as find_exception_handler
except it works on the old style exception table.
(__throw): Replace NEW_EH_MODEL. Detect new model based on presence
of identifier in the exception table, and call appropriate routines.
1998-06-08 Andrew MacLeod <amacleod@cygnus.com>
* except.c (init_exception_processing): Remove NEW_EH_MODEL compile
time flag. Call __cp_eh_info instead of __cp_exception_info.
* exception.cc (struct cp_eh_info): Remove NEW_EH_MODEL flag.
(__cp_exception_info): Return offset into cp_eh_info structure to
match what use to be the start of this structure.
(__cp_eh_info): New function to return a pointer to cp_eh_info struct.
(__cplus_type_matcher, __cp_push_exception): Remove NEW_EH_MODEL
compile time flag.
(__uncatch_exception, __check_eh_spec, std::uncaught_exception): Call
__cp_eh_info instead of __cp_exception_info.
From-SVN: r20336
* acconfig.h (HAVE_GAS_MAX_SKIP_P2ALIGN): New tag.
* configure.in: Check for it.
* i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Use it.
* final.c (uid_align, uid_shuid, label_align): Make static.
(label_align): Change type to struct label_alignment pointer.
(LABEL_TO_ALIGNMENT, shorten_branches): Update due to type change.
(LABEL_TO_MAX_SKIP): Define.
(LABEL_ALIGN_MAX_SKIP, LOOP_ALIGN_MAX_SKIP,
LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP): Provide defaults.
(shorten_branches): Record the maximum bytes to skip when
aligning a label.
(final_scan_insn): Use the maximum bytes to skip when aligning a label
if ASM_OUTPUT_MAX_SKIP_ALIGN is available.
* i386.h (LOOP_ALIGN_MAX_SKIP,
LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP): Define.
* i386.c (override_options): i386_align_jumps and i386_align_loops
default to 4 if ASM_OUTPUT_MAX_SKIP_ALIGN is available.
* invoke.texi: Document new i386 align-loops and align-jumps behavior.
From-SVN: r19933
* dwarfout.h, dwarf2out.h, dbxout.h, sdbout.h: New files.
Prototypes for externally used functions in respective C files.
* dwarfout.c, dbxout.c, dwarf2out.c, sdbout.c, toplev,c,
final.c: Include above files.
* Makefile.in (toplev.o): Add dependency for above four headers.
(final.o): Likewise.
(dwarfout.o, dbxout.o, dwarf2out.o, sdbout.o): Depend on four
respective header files.
From-SVN: r19835
* Makefile.in (c-lang.o): Depend on c-tree.h, c-lex.h and toplev.h.
(c-lex.o): Depend on output.h.
(c-common.o): Likewise.
(stmt.o): Likewise.
(calls.o): Likewise.
(integrate.o): Depend on toplev.h.
(regclass.o): Depend on output.h.
(final.o): Depend on reload.h.
* c-common.c: Include output.h.
(check_format_info): Remove unused variable `integral_format'.
* c-decl.c (print_lang_decl): Mark parameters `file', `node' and
`indent' with ATTRIBUTE_UNUSED.
(print_lang_type): Likewise.
(maybe_build_cleanup): Likewise for parameter `decl'.
(copy_lang_decl): Likewise for parameter `node'.
* c-lang.c: Include c-tree.h, c-lex.h and toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(lookup_interface): Likewise for parameter `arg'.
(is_class_name): Likewise.
(maybe_objc_check_decl): Likewise for parameter `decl'.
(maybe_objc_comptypes): Likewise for parameters `lhs', `rhs' and
`reflexive'.
(maybe_objc_method_name): Likewise for parameter `decl'.
(build_objc_string): Likewise for parameters `len' and `str'.
* c-lex.c: Include output.h.
* c-lex.h (position_after_white_space): Correct typo in prototype.
* c-tree.h (finish_file, c_expand_start_cond, c_expand_start_else,
c_expand_end_cond, init_iterators): Add prototypes.
* caller-save.c (set_reg_live): Mark parameters `reg' and `setter'
with ATTRIBUTE_UNUSED.
* calls.c: Include output.h.
* cccp.c (pipe_closed): Mark parameter `signo' with
ATTRIBUTE_UNUSED.
* combine.c: Move inclusion of expr.h to after insn-config.h.
* iris6.h (ASM_IDENTIFY_GCC, ASM_IDENTIFY_LANGUAGE): Don't define
as empty, rather define as ((void)0).
* sparc.c (sparc_check_64): Add braces around ambiguous `else'.
Add parentheses around assignment used as truth value.
* cplus-dem.c (squangle_mop_up): Change return type to void.
(internal_cplus_demangle): Remove unused parameter `options'.
All callers changed.
(cplus_demangle_opname): Remove function wide variable `int i' and
replace with `size_t i' at each location where it is used.
(cplus_demangle_opname): change type of `i' from int to size_t.
* cppexp.c (right_shift): Mark parameter `pfile' with
ATTRIBUTE_UNUSED.
* cpphash.c (cpp_lookup): Likewise.
(cpp_hash_cleanup): Likewise.
* cpplib.c (parse_name): Add a prototype and make it static.
(null_underflow): Mark parameter `pfile' with ATTRIBUTE_UNUSED.
(null_cleanup): Likewise for parameters `pbuf' and `pfile'.
(macro_cleanup): Likewise for parameter `pfile'.
(file_cleanup): Likewise.
* cpplib.h (cpp_reader_init, cpp_options_init, cpp_start_read,
cpp_read_check_assertion, skip_rest_of_line): Add prototypes.
* crtstuff.c (force_to_data, __CTOR_LIST__, force_to_data,
__DTOR_END__, __FRAME_END__): Mark with ATTRIBUTE_UNUSED.
* cse.c (cse_check_loop_start): Mark parameter `set' with
ATTRIBUTE_UNUSED.
* dbxout.c (flag_minimal_debug, have_used_extensions,
source_label_number): Move inside macro wrapper check against
defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO).
* dwarf2out.c (gen_entry_point_die): Hide prototype and definition.
* except.h (doing_eh): Provide prototype.
* expr.c: Move inclusion of expr.h to after insn-config.h.
* final.c: Include reload.h.
(shorten_branches): Cast the first argument of bzero to char *.
* fix-header.c (cpp_print_containing_files): Mark parameter
`pfile' with ATTRIBUTE_UNUSED.
(cpp_fatal): Likewise.
* flow.c (find_basic_blocks_1): Cast the first argument of bzero
to char *.
* genattrtab.c (make_length_attrs): Change the type of variable
`i' from int to size_t.
(zero_fn): Mark parameter `exp' with ATTRIBUTE_UNUSED.
(one_fn): Likewise.
* genextract.c (main): When generating insn-extract.c, mark
variable `junk' with ATTRIBUTE_UNUSED.
* gengenrtl.c (gencode): When generating genrtl.c, cast the first
argument of bzero to char*.
* integrate.c: Include toplev.h.
* libgcc2.c: Wrap `struct exception_table' and
`find_exception_handler' in macro DWARF2_UNWIND_INFO.
* objc/Make-lang.in (objc-act.o): Depend on toplev.h.
* objc/objc-act.c: Include toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(finish_protocol): Likewise for parameter `protocol'.
* output.h (declare_weak): Add prototype.
(decode_reg_name): Don't wrap with TREE_CODE macro.
(assemble_alias): Add prototype.
* regclass.c: Include output.h.
* reload.h (reloads_conflict): Add prototype.
* rtl.h (print_rtl_single, mark_elimiation, reg_class_subset_p,
output_func_start_profiler): Add prototypes.
* rtlanal.c (reg_set_p_1): Mark parameters `x' and `pat' with
ATTRIBUTE_UNUSED.
* scan-decls.c: Include scan.h.
* scan.h (recognized_function, recognized_extern): Add prototypes.
* stmt.c: Include output.h.
* toplev.c (error_for_asm, warning_for_asm): Remove prototypes.
(output_lang_identify): Hide prototype and definition.
(float_signal): Mark parameter `signo' with ATTRIBUTE_UNUSED.
(pipe_closed): Likewise.
* toplev.h (count_error, strip_off_ending, error_for_asm,
warning_for_asm): Add prototypes.
From-SVN: r19712
* emit-rtl.c (gen_highpart): The high part of a CONST_INT is not zero
if HOST_BITS_PER_WIDE_INT is larger than BITS_PER_WORD.
* final.c (split_double): Sign extend both halves of a split CONST_INT.
From-SVN: r19375
* final.c (shorten_branches, init_insn_lengths): Move code
to free label_align, uid_shuid, insn_lengths, insn_addresses
and uid_align from the former function into the latter one;
Add code to clear these variables.
* sh.h (label_align): Remove declaration.
From-SVN: r19344
P
* final.c (insn_noperands): Change type to unsigned int.
(final_scan_insn): Likewise for noperands;
properly check operand number boundaries.
From-SVN: r18693
d
gcc/ChangeLog:
* c-decl (finish_struct): Change type of min_align to unsigned.
* cplus-dem.c (demangle_function_name): Change type of variable i to size_t;
remove unused variable len.
* dwarf2out.c (reg_save): Add explicit cast of -1 to unsigned and a
comment indicating this is proper behaviour.
(reg_loc_descriptor): Remove redundant comparison of unsigned variable
reg >= 0.
(based_loc_descr): Likewise.
* enquire.c (bitpattern): Change type of variable i to unsigned.
* final.c (output_asm_insn): Don't cast insn_noperands to unsigned.
* flow.c (life_analysis): Change type of variable i to size_t;
remove unused variable insn.
* gcc.c (translate_options): Change type of variables optlen, arglen and
complen to size_t.
(input_filename_length): Change type to size_t.
(do_spec_1): Change type of variable bufsize to size_t.
(main): Change type of variables i and j to size_t;
remove subblock local definition of variable i.
(lookup_compiler): Change type of second argument to size_t;
change type of variable i to size_t.
* genemit.c (output_init_mov_optab): Change type of variable i to size_t.
* genopinit.c (get_insn): Change type of variable pindex to size_t.
* genrecog.c (add_to_sequence): Change type of variable i to size_t.
* global.c (global_alloc): Change type of variable i to size_t.
* regclass.c (init_reg_sets): Change type of variables i and j to unsigned.
* stmt.c (expand_end_bindings): Change type of variable i to size_t.
(expand_end_case): Change type of variable count to size_t.
* toplev.c (main): Change type of variable j to size_t.
(set_target_switch): Change type of variable j to size_t.
(print_switch_values): Change type of variable j to size_t;
remove unused variable flags.
* varasm.c (assemble_variable): Change type of variable align to size_t.
(const_hash_rtx): Change type of variable i to size_t.
gcc/cp/ChangeLog:
Sun Mar 8 17:13:38 1998 Manfred Hollstein <manfred@s-direktnet.de>
* decl2.c (lang_decode_option): Change j's type to size_t.
* tree.c (layout_vbasetypes): record_align and desired_align are of
type unsigned int; const_size and nonvirtual_const_size likewise.
From-SVN: r18490
* final.c (shorten_branches): Tag the loop alignment onto the
first label after NOTE_INSN_LOOP_BEG even if there is an
intervening insn.
From-SVN: r18396
* final.c (max_labelno): New static variable.
(final_scan_insn): Check max_labelno before outputting an
alignment for a label.
(shorten_branches): Remove unused variable length_align.
Fix some minor problems with new shortening code.
From-SVN: r18390
* c-aux-info.c: Include string.h/strings.h.
* pa.c: Include stdlib.h.
(pa_combine_instructions): Prototype the function.
(pa_can_combine_p, forward_branch_p, shadd_constant_p): Likewise.
(reloc_needed): Add default case for enumeration switch.
(remove_useless_addtr_insns): Remove unused variable `all'.
(hppa_expand_prologue): Add explicit braces to avoid
ambiguous `else'.
(output_function_epilogue): Remove unused variable `i'.
(output_millicode_call): Remove unused variable `link'.
(shadd_constant_p, forward_branch_p): Make the function static.
(following_call): Explicitly declare to return int.
(pa_reorg): Declare as void.
(pa_combine_instructions): Declare as static void. Add
parentheses around && within ||.
* pa.h: Add prototypes for pa_reorg, symbolic_operand,
following_call, function_label_operand, lhs_lshift_cint_operand
and zdepi_cint_p.
* pa.md: Add parentheses around && within ||.
* cppalloc.c: Include stdlib.h.
* cpperror.c (cpp_print_containing_files): Remove unused variable
`i'. Fix format specifier in fprintf.
* cse.c (cse_around_loop): Add explicit braces to avoid
ambiguous `else'.
(delete_dead_from_cse): Wrap variable `tem' in macro HAVE_cc0.
* expr.c (expand_expr): Add parentheses around && within ||.
* final.c (app_enable): Replace fprintf with fputs where there are
no format specifiers and no trailing argument after the string.
Eg, when printing ASM_APP_ON/ASM_APP_OFF.
(app_disable): Likewise.
(final_end_function): Likewise.
(final_scan_insn): Likewise. Remove unused variable `set'.
(profile_function): Wrap empty if-statement body in {} brackets.
* function.c: Include stdlib.h.
(pad_below): Wrap prototype and definition in ARGS_GROW_DOWNWARD.
(reposition_prologue_and_epilogue_notes): Add parentheses
around assignment used as truth value.
* integrate.c (expand_inline_function): Wrap variable
`cc0_insn' in macro HAVE_cc0.
* jump.c (jump_optimize): Wrap variable `q' in macro
HAVE_cc0. Remove unused variable `prev1'.
* libgcc2.c (__bb_exit_trace_func): Add parentheses around &&
within ||. Fix format specifier in fprintf.
(__bb_init_prg): Add parentheses around assignment used as
truth value.
* local-alloc.c: Include stdlib.h.
(requires_inout): Add parentheses around assignment used
as truth value.
* loop.c (analyze_loop_iterations): Wrap prototype and definition
in macro HAVE_decrement_and_branch_on_count.
(insert_bct, instrument_loop_bct): Likewise.
(move_movables): Add parentheses around assignment used as
truth value.
(consec_sets_invariant_p): Likewise.
(maybe_eliminate_biv_1): Wrap variable `new' in macro HAVE_cc0.
* objc/objc-act.c: Include stdlib.h.
(lookup_method_in_protocol_list): Wrap empty else-statement body
in braces.
(lookup_protocol_in_reflist): Likewise.
(objc_add_static_instance): Remove unused variables `decl_expr'
and `decl_spec'.
(get_objc_string_decl): Remove unused variable `decl'.
(generate_static_references): Remove unused variables `idecl' and
`instance'.
(check_protocols): Wrap empty else-statement body in braces.
* protoize.c: Include stdlib.h.
(substr): Add parentheses around assignment used as truth value.
(abspath): Likewise.
(shortpath): Likewise.
* regmove.c (fixup_match_1): Add parentheses around assignment
used as truth value.
* reload.c (push_secondary_reload): Remove unused variable `i'.
(find_reloads): Add parentheses around assignment used as truth
value.
* reload1.c: Include stdlib.h.
* rtl.h: Correct typo in prototype of offsettable_memref_p.
* stmt.c (add_case_node): Add parentheses around assignment used
as truth value.
(case_tree2list): Likewise.
* tree.c (valid_machine_attribute): Wrap variable `decl_attr_list'
in macro VALID_MACHINE_DECL_ATTRIBUTE. Wrap variable
`type_attr_list' in macro VALID_MACHINE_TYPE_ATTRIBUTE.
(merge_attributes): Add explicit braces to avoid ambiguous
`else'.
* unroll.c (copy_loop_body): Wrap variable `cc0_insn' in
macro HAVE_cc0.
* varasm.c: Include stdlib.h.
From-SVN: r18290
* dwarf2out.c: Add old_args_size.
(dwarf2out_args_size): Use it.
(dwarf2out_begin_prologue): Initialize it.
(dwarf2out_stack_adjust): If !asynchronous_exceptions, save up
pushed args until we see a call.
* final.c (final_scan_insn): Hand CALL_INSNs off to the dwarf2 code
before outputting them.
* cplus-dem.c (demangle_template_template_parm): New function.
(demangle_template): Handle template template parameters.
From-SVN: r17685
* c-lex.c: Include <stdlib.h> and <string.h>/<strings.h>. Add
prototype for `handle_sysv_pragma', and make it static. Add
parentheses around assignment used as truth value.
* combine.c (combine_instructions): Protect variable `prev' with
macro HAVE_cc0.
(can_combine_p): Protect variable `link' with AUTO_INC_DEC.
(extract_left_shift): Add parentheses around operand of &.
(merge_outer_ops): Avoid an empty body in an else-statement.
(gen_rtx_combine): Remove unused variable `i'.
* sparc/gmon-sol2.c: Include <fcntl.h>. Make return type of
function monstartup `void'. Likewise for internal_mcount. Add
`static void' prototype for moncontrol. Reconcile sprintf format
vs. args.
* sparc/sparc.c: Include <stdlib.h> and <string.h>/<strings.h>.
Make return type of function_arg_slotno explicitly `int'.
(reg_unused_after): Add parentheses around assignment used as
truth value.
(save_regs): Add explicit braces to avoid ambiguous `else'.
(function_arg_slotno): Add parentheses around && within ||.
(function_arg_pass_by_reference): Likewise.
(sparc_flat_output_function_prologue): Reconcile fprintf format
vs. args.
* svr4.h (ASM_OUTPUT_LIMITED_STRING): Add parentheses around
assignment used as truth value.
* cplus-dem.c: Include <stdlib.h>.
(demangle_signature): Avoid an empty body in an else-statement.
(do_type): Remove unused variable `lvl'.
* cppexp.c: Don't have <stdlib.h> depend on MULTIBYTE_CHARS.
Include <string.h>/<strings.h>.
(cpp_lex): Remove unused variable `namelen'.
(cpp_lex): Explicitly declare `num_chars' as an int.
* cpplib.c: Avoid duplicate inclusion of <stdlib.h>, include
<unistd.h> instead. Explicitly declare is_system_include
returning int.
(make_assertion): Remove unused variable `kt'.
(cpp_expand_to_buffer): Hide variable `obuf'.
(output_line_command): Remove unused variables, `line_end',
`line_cmd_buf' and `len'.
(macarg): Remove unused variable `arg_start'.
(special_symbol): Remove unused variable `i'. Add parentheses
around assignment used as truth value.
(do_include): Remove unused variables `pcfname' and `retried',
hide `pcf' and `pcfbuflimit'.
(do_line): Remove unused variable `i'.
(finclude): Hide variable `missing_newline'.
(cpp_handle_options): Remove unused variable `j'.
(read_token_list): Remove unused variable `eofp'.
(cpp_error_with_line): Remove unused variable `i'.
(cpp_warning_with_line): Likewise.
(cpp_pedwarn_with_line): Explicitly declare `column' as int.
(cpp_error_from_errno): Remove unused variable `i'.
* cse.c (invalidate): Add parentheses around assignment used as
truth value.
(find_best_addr): Move declaration of variable `our_cost' inside
the conditional macro where its used.
(fold_rtx): Avoid an empty body in an if-statement.
(cse_insn): Wrap variables `this_insn_cc0_mode' and
`this_insn_cc0' in macro HAVE_cc0.
* dwarf2out.c: Include <stdlib.h> and <string.h>/<string.h>.
(ASM_OUTPUT_DWARF_DATA8): Reconcile format vs. args in fprintf's.
(output_uleb128): Likewise.
(output_sleb128): Likewise.
(output_cfi): Likewise.
(output_call_frame_info): Remove unused variables `j', `fde_size'
and `fde_pad'.
(comp_unit_has_inlines): Hide declaration as per rest of file.
(size_of_line_prolog): Correct typo in prototype.
(add_arange): Likewise.
(output_aranges): Likewise.
(add_name_and_src_coords_attributes): Likewise.
(gen_array_type_die): Likewise.
(gen_inlined_subroutine_die): Likewise.
(equate_decl_number_to_die): Remove unused variable `i'.
(print_die): Reconcile format vs. args in fprintf's.
(print_dwarf_line_table): Likewise.
(output_die): Likewise.
(output_line_info): Likewise.
(add_subscript_info): Avoid an empty body in an else-statement.
(gen_subprogram_die): Remove unused variable `fp_loc'.
* dwarfout.c: Explicitly declare `next_pubname_number' as int.
Protect `ordering_attribute' prototype with USE_ORDERING_ATTRIBUTE
macro. Protect `src_coords_attribute' prototype with
DWARF_DECL_COORDINATES macro. Hide `output_entry_point_die'
prototype as in the rest of the file. Likewise for
`output_pointer_type_die' and `output_reference_type_die'. Remove
prototype for `type_of_for_scope'.
(output_unsigned_leb128): Reconcile format vs. args in fprintf.
(type_attribute): Add explicit braces to avoid ambiguous `else'.
* final.c: Include <stdlib.h> and <string.h>/<strings.h>.
(shorten_branches): Protect declaration of tmp_length with
SHORTEN_WITH_ADJUST_INSN_LENGTH and ADJUST_INSN_LENGTH macros.
(profile_function): Protect declaration of `sval' and `cxt'
variables with appropriate macros.
(final_scan_insn): Likewise for `note' variable. Add explicit
braces to avoid empty body in an if-statement.
(output_asm_insn): Move variable `i' inside macro conditional
where it is used. Add parentheses around assignment used as truth
value.
(asm_fprintf) Likewise, likewise.
* fix-header.c (main): Remove unused variable `done'. Protect
declaration of `i' with FIXPROTO_IGNORE_LIST.
* pexecute.c: Include <unistd.h>. Prototype `my_strerror'.
* print-rtl.c (print_inline_rtx): Explicitly declare the parameter
`ind'.
* profile.c: Include <string.h>/<strings.h>.
(instrument_arcs): Remove unused variables `note', `inverted',
`zero' and `neg_one'.
(branch_prob): Avoid empty body in an if-statement.
* regclass.c: Include <stdlib.h>.
(reg_alternate_class): Explicitly declare parameter `regno'.
* regmove.c (regmove_optimize): Remove unused variable `p'. Add
parentheses around assignment used as truth value.
(find_matches): Remove unused variables `output_operand' and
`matching_operand'.
(fixup_match_1): Remove statement with no effect: "if (0) ;".
* scan.c (sstring_append): Explicitly declare `count' as int.
(scan_string): Explicitly declare parameter `init' as int.
* sched.c: Include <stdlib.h>.
(BLOCKAGE_RANGE): Add parentheses around arithmetic in operand of |.
(rank_for_schedule): Add parentheses around assignment used as
truth value.
(schedule_block): Likewise.
(regno_use_in): Likewise.
(schedule_insns): Remove unused variable `i'.
* toplev.c: Include <stdlib.h> and <string.h>/<strings.h>.
(v_message_with_decl): Remove unused variable `n'.
(botch): Explicitly declare parameter `s' as char *.
(main): Add parentheses around assignment used as truth value.
* tree.c (make_node): Protect the variable `kind' with the
GATHER_STATISTICS macro.
(real_value_from_int_cst): Move variable `e' inside conditional
macro area where it is used.
(tree_last): Add parentheses around assignment used as truth value.
(build1): Protect the variable `kind' with the GATHER_STATISTICS
macro.
(print_obstack_statistics): Reconcile format vs. args in fprintf.
Protect variables `i', `total_nodes', and `total_bytes' with the
GATHER_STATISTICS macro.
Lots more -W -Wall warnings disappear.
From-SVN: r17516
* final.c (final_scan_insn): Hand BARRIERs off to the dwarf2 code.
* dwarf2out.c (dwarf2out_frame_debug): Pass the whole insn along.
(dwarf2out_stack_adjust): A BARRIER resets the args space to 0.
* except.c (end_eh_unwinder): Subtract 1 from return address.
* libgcc2.c (__throw): Likewise.
(find_exception_handler): Don't change PC here. Compare end with >.
From-SVN: r15554
* version.c: Bump for snapshot.
* expmed.c (expand_divmod): Make op1_is_pow2 depend on unsignedp
for negative constants. Promote EXACT_DIV_EXPR to TRUNC_DIV_EXPR
when op1_is_pow2.
* final.c (shorten_branches): During first pass, assume worst
possible alignment for ADDR_VEC and ADDR_VEC_DIFF insns.
* Makefile.in (distclean): Remove various things left around
by running the testsuite.
From-SVN: r15136
* final.c (LONG_TYPE_SIZE): Define.
(count_instrumented_arcs): New variable.
(end_final, profile_after_prologue, leaf_function_p): Add support
for profile_arc_flag.
(add_bb): Only call CC_STATUS_INIT if HAVE_cc0.
From-SVN: r13813
(shorten_branches): Split all insns before computing insn
lengths.
(final_scan_insn, case default): If HAVE_ATTR_length defined, call
abort for any insn that has a '#' output template.
From-SVN: r13744
(final_start_function): Move call to sdbout_begin_function back to
final_scan_insn on MIPS systems so parameter descriptions are
recognized.
From-SVN: r10591
If XCOFF_DEBUG, call xcoffout_begin_function instead of
xcoffout_output_first_source_line.
(final_scan_insn): Don't call sdbout_begin_function or xcoffout_begin_function.
From-SVN: r10181
(output_asm_insn): If flag_print_asm_name, print the comment after the
first assembler instruction even in multi-instruction templates.
From-SVN: r9030
(final_start_function): Initialize them.
(final_end_function): Pass highest line number to function end debugging
routines.
(final_scan_insn): Pass highest line number in block to block end debugging
function.
(output_source_line): Update highest line in block and function.
From-SVN: r8827
* final.c (IS_ASM_LOGICAL_LINE_SEPARATOR): Provide default
definition.
(asm_insn_count): Use IS_ASM_LOGICAL_LINE_SEPARATOR rather
than assuming the logical line separator is ';'.
From-SVN: r6524
