baa8575b29
200 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom Tromey
|
26a57c9256 |
Remove ptid_match
This removes ptid_match in favor of the ptid_t::matches method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_match): Remove. * common/ptid.h (ptid_match): Don't declare. * fbsd-nat.c: Update. * infcmd.c: Update. * infrun.c: Update. * linux-nat.c: Update. * record-btrace.c: Update. * regcache.c: Update. * remote.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * server.c: Update. |
||
Pedro Alves
|
f2ffa92bbc |
gdb: Eliminate the 'stop_pc' global
In my multi-target work, I need to add a few more scoped_restore_current_thread and switch_to_thread calls in some places, and in some lower-level places I was fighting against the fact that switch_to_thread reads/refreshes the stop_pc global. Instead of piling on workarounds, let's just finally eliminate the stop_pc global. We already have the per-thread thread_info->suspend.stop_pc field, so it's mainly a matter of using that more/instead. gdb/ChangeLog: 2018-06-28 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend comments. (switch_to_thread_no_regs): Adjust comment. * infcmd.c (stop_pc): Delete. (post_create_inferior, info_program_command): Replace references to stop_pc with references to thread_info->suspend.stop_pc. * inferior.h (stop_pc): Delete declaration. * infrun.c (proceed, handle_syscall_event, fill_in_stop_func) (handle_inferior_event_1, handle_signal_stop) (process_event_stop_test, keep_going_stepped_thread) (handle_step_into_function, handle_step_into_function_backward) (print_stop_location): Replace references to stop_pc with references to thread_info->suspend.stop_pc. (struct infcall_suspend_state) <stop_pc>: Delete field. (save_infcall_suspend_state, restore_infcall_suspend_state): Remove references to inf_stat->stop_pc. * linux-fork.c (fork_load_infrun_state): Likewise. * record-btrace.c (record_btrace_set_replay): Likewise. * record-full.c (record_full_goto_entry): Likewise. * remote.c (print_one_stopped_thread): Likewise. * target.c (target_resume): Extend comment. * thread.c (set_executing_thread): New. (set_executing): Use it. (switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread): Remove references to stop_pc. |
||
|
Pedro Alves
|
00431a78b2 |
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid. |
||
|
Pedro Alves
|
b6a8c27bb8 |
target_ops::beneath -> target_ops::beneath()
This changes target_ops::beneath from a pointer to a method, and adjusts all references throughout. The idea here is to make it easier to change the target stack representation from an intrusive singly linked list to something else without leaking implementation details throughout. The commit does not change the representation yet, that will be done in a following patch. That is why a new target_ops::m_beneath field appears here. That new field isn't really documented properly or made private, simply because it will be removed shortly. Note that target_ops::beneath() is essentially the same as the current find_target_beneath routine. The following patch will eliminate the latter. gdb/ChangeLog: 2018-06-07 Pedro Alves <palves@redhat.com> * target.h (target_ops) <beneath>: Now a method. All references updated. (target_ops) <m_beneath>: New. * target.c (target_ops::beneath): New. * corelow.c: Adjust all references to target_ops::beneath. * linux-thread-db.c: Likewise. * make-target-delegates: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * remote.c: Likewise. * target.c: Likewise. * target-delegates.c: Regenerate. |
||
Simon Marchi
|
73e1c03f93 |
Remove regcache_raw_supply
Remove regcache_raw_supply, update callers to use detached_regcache::raw_supply. gdb/ChangeLog: * regcache.h (regcache_raw_supply): Remove, update callers to use detached_regcache::raw_supply. * regcache.c (regcache_raw_supply): Remove. |
||
|
Simon Marchi
|
222312d359 |
Remove regcache_get_ptid
Remove regcache_get_ptid, change all callers to call the regcache method directly. gdb/ChangeLog: * regcache.h (regcache_get_ptid): Remove, update all callers to call regcache::ptid instead. * regcache.c (regcache_get_ptid): Remove. |
||
|
Tom Tromey
|
10b2ded43c |
Remove tp_t typedef
The tp_t typedef is no longer used and can be removed. ChangeLog 2018-05-29 Tom Tromey <tom@tromey.com> * record-btrace.c (tp_t): Remove typedef. Don't declare VEC. |
||
|
Tom Tromey
|
55063ddb8e |
Update help text in record-btrace.c
This updates the help text in record-btrace.c to conform to GNU standards. 2018-04-29 Tom Tromey <tom@tromey.com> * record-btrace.c (_initialize_record_btrace): Update help text. |
||
|
Pedro Alves
|
d9f719f1ad |
target factories, target open and multiple instances of targets
Currently, to open a target, with "target TARGET_NAME", GDB finds the target_ops instance with "TARGET_NAME" as short name, and then calls its target_ops::open virtual method. In reality, there's no actual target/name lookup, a pointer to the target_ops object was associated with the "target TARGET_NAME" command at add_target time (when GDB is initialized), as the command's context. This creates a chicken and egg situation. Consider the case of wanting to open multiple remote connections. We want to be able to have one remote target_ops instance per connection, but, if we're not connected yet, so we don't yet have an instance to call target->open() on... This patch fixes this by separating out common info about a target_ops to a separate structure (shortname, longname, doc), and changing the add_target routine to take a reference to such an object instead of a pointer to a target_ops, and a pointer to a factory function that is responsible to open an instance of the corresponding target when the user types "target TARGET_NAME". -extern void add_target (struct target_ops *); +extern void add_target (const target_info &info, target_open_ftype *func); I.e. this factory function replaces the target_ops::open virtual method. For static/singleton targets, nothing changes, the target_open_ftype function pushes the global target_ops instance on the target stack. At target_close time, the connection is tor down, but the global target_ops object remains live. However, targets that support being open multiple times will make their target_open_ftype routine allocate a new target_ops instance on the heap [e.g., new remote_target()], and push that on the stack. At target_close time, the new object is destroyed (by the target_ops::close virtual method). Both the core target and the remote targets will support being open multiple times (others could/should too, but those were my stopping point), but not in this patch yet. We need to get rid of more globals first before that'd be useful. Native targets are somewhat special, given find_default_run_target & friends. Those routines also expect to return a target_ops pointer, even before we've open the target. However, we'll never need more than one instance of the native target, so we can assume/require that native targets are global/simpletons, and have the backends register a pointer to the native target_ops. Since all native targets inherit inf_child_target, we can centralize that registration. See add_inf_child_target, get_native_target/set_native_target and find_default_run_target. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use add_inf_child_target. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use add_inf_child_target. * aix-thread.c (aix_thread_target_info): New. (aix_thread_target) <shortname, longname, doc>: Delete. <info>: New. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Use add_inf_child_target. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Use add_inf_child_target. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use add_inf_child_target. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Use add_inf_child_target. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use add_inf_child_target. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use add_inf_child_target. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use add_inf_child_target. * arm-linux-nat.c (_initialize_arm_linux_nat): Use add_inf_child_target. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use add_inf_child_target. * bfd-target.c (target_bfd_target_info): New. (target_bfd) <shortname, longname, doc>: Delete. <info>: New. * bsd-kvm.c (bsd_kvm_target_info): New. (bsd_kvm_target) <shortname, longname, doc>: Delete. <info>: New. (bsd_kvm_target::open): Rename to ... (bsd_kvm_target_open): ... this. Adjust. * bsd-uthread.c (bsd_uthread_target_info): New. (bsd_uthread_target) <shortname, longname, doc>: Delete. <info>: New. * corefile.c (core_file_command): Adjust. * corelow.c (core_target_info): New. (core_target) <shortname, longname, doc>: Delete. <info>: New. (core_target::open): Rename to ... (core_target_open): ... this. Adjust. * ctf.c (ctf_target_info): New. (ctf_target) <shortname, longname, doc>: Delete. <info>: New. (ctf_target::open): Rename to ... (ctf_target_open): ... this. (_initialize_ctf): Adjust. * exec.c (exec_target_info): New. (exec_target) <shortname, longname, doc>: Delete. <info>: New. (exec_target::open): Rename to ... (exec_target_open): ... this. * gdbcore.h (core_target_open): Declare. * go32-nat.c (_initialize_go32_nat): Use add_inf_child_target. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Use add_inf_child_target. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use add_inf_child_target. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use add_inf_child_target. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Use add_inf_child_target. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use add_inf_child_target. * i386-gnu-nat.c (_initialize_i386gnu_nat): Use add_inf_child_target. * i386-linux-nat.c (_initialize_i386_linux_nat): Use add_inf_child_target. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use add_inf_child_target. * i386-obsd-nat.c (_initialize_i386obsd_nat): Use add_inf_child_target. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Use add_inf_child_target. * inf-child.c (inf_child_target_info): New. (inf_child_target::info): New. (inf_child_open_target): Remove 'target' parameter. Use get_native_target instead. (inf_child_target::open): Delete. (add_inf_child_target): New. * inf-child.h (inf_child_target) <shortname, longname, doc, open>: Delete. <info>: New. (add_inf_child_target): Declare. (inf_child_open_target): Declare. * linux-thread-db.c (thread_db_target_info): New. (thread_db_target) <shortname, longname, doc>: Delete. <info>: New. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Use add_inf_child_target. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use add_inf_child_target. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Use add_inf_child_target. * m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use add_inf_child_target. * make-target-delegates (print_class): Adjust. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use add_inf_child_target. * mips-linux-nat.c (_initialize_mips_linux_nat): Use add_inf_child_target. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use add_inf_child_target. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use add_inf_child_target. * nto-procfs.c (nto_native_target_info): New. (nto_procfs_target_native) <shortname, longname, doc>: Delete. <info>: New. (nto_procfs_target_info): New. (nto_procfs_target_procfs) <shortname, longname, doc>: Delete. <info>: New. (init_procfs_targets): Adjust. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use add_inf_child_target. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Use add_inf_child_target. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use add_inf_child_target. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use add_inf_child_target. * ravenscar-thread.c (ravenscar_target_info): New. (ravenscar_thread_target) <shortname, longname, doc>: Delete. <info>: New. * record-btrace.c (record_btrace_target_info): (record_btrace_target) <shortname, longname, doc>: Delete. <info>: New. (record_btrace_target::open): Rename to ... (record_btrace_target_open): ... this. Adjust. * record-full.c (record_longname, record_doc): New. (record_full_base_target) <shortname, longname, doc>: Delete. <info>: New. (record_full_target_info): New. (record_full_target): <shortname>: Delete. <info>: New. (record_full_core_open_1, record_full_open_1): Update comments. (record_full_base_target::open): Rename to ... (record_full_open): ... this. (cmd_record_full_restore): Update. (_initialize_record_full): Update. * remote-sim.c (remote_sim_target_info): New. (gdbsim_target) <shortname, longname, doc>: Delete. <info>: New. (gdbsim_target::open): Rename to ... (gdbsim_target_open): ... this. (_initialize_remote_sim): Adjust. * remote.c (remote_doc): New. (remote_target_info): New. (remote_target) <shortname, longname, doc>: Delete. <info>: New. (extended_remote_target_info): New. (extended_remote_target) <shortname, longname, doc>: Delete. <info>: New. (remote_target::open_1): Make static. Adjust. * rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target. * s390-linux-nat.c (_initialize_s390_nat): Use add_inf_child_target. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Use add_inf_child_target. * sol-thread.c (thread_db_target_info): New. (sol_thread_target) <shortname, longname, doc>: Delete. <info>: New. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Use add_inf_child_target. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use add_inf_child_target. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use add_inf_child_target. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use add_inf_child_target. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use add_inf_child_target. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use add_inf_child_target. * spu-linux-nat.c (_initialize_spu_nat): Use add_inf_child_target. * spu-multiarch.c (spu_multiarch_target_info): New. (spu_multiarch_target) <shortname, longname, doc>: Delete. <info>: New. * target-delegates.c: Regenerate. * target.c: Include <unordered_map>. (target_ops_p): Delete. (DEF_VEC_P(target_ops_p)): Delete. (target_factories): New. (test_target_info): New. (test_target_ops::info): New. (open_target): Adjust to use target_factories. (add_target_with_completer): Rename to ... (add_target): ... this. Change prototype. Register target_info and open callback in target_factories. Register target_info in command context instead of target_ops. (add_target): Delete old implementation. (add_deprecated_target_alias): Change prototype. Adjust. (the_native_target): New. (set_native_target, get_native_target): New. (find_default_run_target): Use the_native_target. (find_attach_target, find_run_target): Simplify. (target_ops::open): Delete. (dummy_target_info): New. (dummy_target::shortname, dummy_target::longname) (dummy_target::doc): Delete. (dummy_target::info): New. (debug_target::shortname, debug_target::longname) (debug_target::doc): Delete. (debug_target::info): New. * target.h (struct target_info): New. (target_ops::~target_ops): Add comment. (target_ops::info): New. (target_ops::shortname, target_ops::longname, target_ops::doc): No longer virtual. Implement in terms of target_info. (set_native_target, get_native_target): Declare. (target_open_ftype): New. (add_target, add_target_with_completer) (add_deprecated_target_alias): Change prototype. (test_target) <shortname, longname, doc>: Delete. <info>: New. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Use add_inf_child_target. * tracefile-tfile.c (tfile_target_info): New. (tfile_target) <shortname, longname, doc>: Delete. <info>: New. (tfile_target::open): Rename to ... (tfile_target_open): ... this. (_initialize_tracefile_tfile): Adjust. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Use add_inf_child_target. * windows-nat.c (_initialize_windows_nat): Use add_inf_child_target. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use add_inf_child_target. |
||
|
Pedro Alves
|
57810aa7e8 |
target_ops: Use bool throughout
After the previous target_ops/C++ patches are all squashed and merged, this one can go in separately. This patch adjusts all the target methods to return bool instead of int when they're returning a boolean. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * target.h (target_ops) <stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint, stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint, stopped_by_watchpoint, have_continuable_watchpoint, stopped_data_address, watchpoint_addr_within_range, can_accel_watchpoint_condition, can_run, thread_alive, has_all_memory, has_memory, has_stack, has_registers, has_execution, can_async_p, is_async_p, supports_non_stop, always_non_stop_p, can_execute_reverse, supports_multi_process, supports_enable_disable_tracepoint, supports_disable_randomization, supports_string_tracing, supports_evaluation_of_breakpoint_conditions, can_run_breakpoint_commands, filesystem_is_local, can_download_tracepoint, get_trace_state_variable_value, set_trace_notes, get_tib_address, use_agent, can_use_agent, record_is_replaying, record_will_replay, augmented_libraries_svr4_read>: Adjust to return bool. * aarch64-linux-nat.c: All implementations adjusted. * aix-thread.c: All implementations adjusted. * arm-linux-nat.c: All implementations adjusted. * breakpoint.c: All implementations adjusted. * bsd-kvm.c: All implementations adjusted. * bsd-uthread.c: All implementations adjusted. * corelow.c: All implementations adjusted. * ctf.c: All implementations adjusted. * darwin-nat.c: All implementations adjusted. * darwin-nat.h: All implementations adjusted. * exec.c: All implementations adjusted. * fbsd-nat.c: All implementations adjusted. * fbsd-nat.h: All implementations adjusted. * gnu-nat.c: All implementations adjusted. * gnu-nat.h: All implementations adjusted. * go32-nat.c: All implementations adjusted. * ia64-linux-nat.c: All implementations adjusted. * inf-child.c: All implementations adjusted. * inf-child.h: All implementations adjusted. * inf-ptrace.c: All implementations adjusted. * inf-ptrace.h: All implementations adjusted. * linux-nat.c: All implementations adjusted. * linux-nat.h: All implementations adjusted. * mips-linux-nat.c: All implementations adjusted. * nto-procfs.c: All implementations adjusted. * ppc-linux-nat.c: All implementations adjusted. * procfs.c: All implementations adjusted. * ravenscar-thread.c: All implementations adjusted. * record-btrace.c: All implementations adjusted. * record-full.c: All implementations adjusted. * remote-sim.c: All implementations adjusted. * remote.c: All implementations adjusted. * s390-linux-nat.c: All implementations adjusted. * sol-thread.c: All implementations adjusted. * spu-multiarch.c: All implementations adjusted. * target-delegates.c: All implementations adjusted. * target.c: All implementations adjusted. * target.h: All implementations adjusted. * tracefile-tfile.c: All implementations adjusted. * tracefile.c: All implementations adjusted. * tracefile.h: All implementations adjusted. * windows-nat.c: All implementations adjusted. * x86-linux-nat.h: All implementations adjusted. * x86-nat.h: All implementations adjusted. |
||
|
Pedro Alves
|
f6ac5f3d63 |
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
||
Markus Metzger
|
4a4495d62d |
btrace: set/show record btrace cpu
Add new set/show commands to set the processor that is used for enabling errata workarounds when decoding branch trace. The general format is "<vendor>:<identifier>" but we also allow two special values "auto" and "none". The default is "auto", which is the current behaviour of having GDB determine the processor on which the trace was recorded. If that cpu is not known to the trace decoder, e.g. when using an old decoder on a new system, decode may fail with "unknown cpu". In most cases it should suffice to 'downgrade' decode to assume an older cpu. Unfortunately, we can't do this automatically. The other special value, "none", disables errata workarounds. gdb/ * NEWS (New options): announce set/show record btrace cpu. * btrace.c: Include record-btrace.h. (btrace_compute_ftrace_pt): Skip enabling errata workarounds if the vendor is unknown. (btrace_compute_ftrace_1): Add cpu parameter. Update callers. Maybe overwrite the btrace configuration's cpu. (btrace_compute_ftrace): Add cpu parameter. Update callers. (btrace_fetch): Add cpu parameter. Update callers. (btrace_maint_update_pt_packets): Call record_btrace_get_cpu. Maybe overwrite the btrace configuration's cpu. Skip enabling errata workarounds if the vendor is unknown. * python/py-record-btrace.c: Include record-btrace.h. (recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history) (recpy_bt_function_call_history): Call record_btrace_get_cpu. * record-btrace.c (record_btrace_cpu_state_kind): New. (record_btrace_cpu): New. (set_record_btrace_cpu_cmdlist): New. (record_btrace_get_cpu): New. (require_btrace_thread, record_btrace_info) (record_btrace_resume_thread): Call record_btrace_get_cpu. (cmd_set_record_btrace_cpu_none): New. (cmd_set_record_btrace_cpu_auto): New. (cmd_set_record_btrace_cpu): New. (cmd_show_record_btrace_cpu): New. (_initialize_record_btrace): Initialize set/show record btrace cpu commands. * record-btrace.h (record_btrace_get_cpu): New. testsuite/ * gdb.btrace/cpu.exp: New. doc/ * gdb.texinfo: Document set/show record btrace cpu. |
||
|
Markus Metzger
|
b85310e1ec |
btrace: fix output of "set record btrace"
Instead of giving a message that "set record btrace" needs a sub-command, GDB crashed. Fix it. A regression test comes with the next patch. gdb/ * record-btrace.c (cmd_set_record_btrace): Print sub-commands. |
||
|
Tom Tromey
|
76727919ce |
Convert observers to C++
This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove. |
||
Simon Marchi
|
7ea78b5973 |
btrace: Remove ui_out cleanups
This patch replaces the cleanups that close the list and tuple of the btrace instruction history output with ui_out_emit_tuple and ui_out_emit_list. This allows removing make_cleanup_ui_out_tuple_begin_end and make_cleanup_ui_out_list_begin_end. This patch (along with the previous ones in the series) was regtested on the buildbot. gdb/ChangeLog: * record-btrace.c (btrace_print_lines): Replace cleanup parameter with RAII equivalents. (btrace_insn_history): Replace cleanup with RAII equivalents. * ui-out.h (make_cleanup_ui_out_list_begin_end, make_cleanup_ui_out_tuple_begin_end): Remove. * ui-out.c (struct ui_out_end_cleanup_data, do_cleanup_end, make_cleanup_ui_out_end, make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end): Remove. |
||
|
Simon Marchi
|
5312700841 |
btrace: Remove VEC cleanups
This patch replaces two VEC(tp_t) with std::vector<thread_info *>, which allows to remove two cleanups. To make it easier to map the old code to the new code, I added the ordered_remove and unordered_remove functions, which operate on std::vector and do the same as VEC's ordered_remove/unordered_remove. gdb/ChangeLog: * record-btrace.c (record_btrace_maybe_mark_async_event): Change parameter types to std::vector. Use bool. (record_btrace_wait): Replace VEC(tp_t) with std::vector<thread_info *>. * common/gdb_vecs.h (unordered_remove, ordered_remove): New. |
||
|
Simon Marchi
|
228f15081e |
btrace: Remove btrace disable cleanup
This patch removes a cleanup that disables btrace on threads in case of failure, so we don't leave it enabled for some the threads and disabled for the rest. gdb/ChangeLog: * record-btrace.c (record_btrace_disable_callback): Remove. (struct scoped_btrace_disable): New. (record_btrace_open): Use scoped_btrace_disable. |
||
|
Simon Marchi
|
3dea1ef72c |
Propagate gdb_disassembly_flags to btrace_print_lines
This function can take the flags as the gdb_disassembly_flags type instead of int. gdb/ChangeLog: * record-btrace.c (btrace_print_lines): Change type of flags to gdb_disassembly_flags. |
||
|
Simon Marchi
|
0cb7c7b0bb |
Propagate record_print_flags
These flags are returned as an int by get_call_history_modifiers, and get cast back to record_print_flags in the btrace code. Instead, we can make the arguments of that type from start to end. gdb/ChangeLog: * record.c (get_call_history_modifiers): Return a record_print_flags. (cmd_record_call_history): Adjust. * record-btrace.c (record_btrace_call_history): Adjust. (record_btrace_call_history_range): Adjust. (record_btrace_call_history_from): Adjust. * target-debug.h (target_debug_print_record_print_flags): New. * target-delegates.c: Re-generate. * target.c (target_call_history): Change flags type. (target_call_history_from): Likewise. (target_call_history_range): Likewise. * target.h (struct target_ops) <target_call_history>: Likewise. (target_call_history_from): Likewise. (target_call_history_range): Likewise. |
||
Joel Brobecker
|
e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
||
|
Simon Marchi
|
798a7429f9 |
Remove some unused variables
This patch removes some unused variables, found with -Wunused. I have not removed everything reported by -Wunused, because some expressions such as struct type *arg_type = check_typedef (value_type); in bfin-tdep.c could have an unexpected but important side-effect. I removed others that I considered more low-risk, such as: struct gdbarch *gdbarch = get_objfile_arch (objfile); I tested building with Python 2/Python 3/no Python, with/without expat, with/without libipt and with/without babeltrace. gdb/ChangeLog: * ada-lang.c (ada_collect_symbol_completion_matches): Remove unused variables. (ada_is_redundant_range_encoding): Likewise. * ada-varobj.c (ada_varobj_get_value_of_array_variable): Likewise. * alpha-tdep.c (alpha_software_single_step): Likewise. * arm-tdep.c (_initialize_arm_tdep): Likewise. * auto-load.c (info_auto_load_cmd): Likewise. * break-catch-syscall.c (insert_catch_syscall): Likewise. (remove_catch_syscall): Likewise. * breakpoint.c (condition_completer): Likewise. (clear_command): Likewise. (update_breakpoint_locations): Likewise. * btrace.c (btrace_disable): Likewise. (btrace_teardown): Likewise. (btrace_maint_update_pt_packets): Likewise. (maint_btrace_clear_cmd): Likewise. * cli/cli-decode.c (lookup_cmd_1): Likewise. (lookup_cmd_composition): Likewise. * cli/cli-dump.c (scan_filename): Likewise. (restore_command): Likewise. * compile/compile-loc2c.c (compute_stack_depth): Likewise. * compile/compile-object-load.c (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (compile_to_object): Likewise. * completer.c (filename_completer): Likewise. (complete_files_symbols): Likewise. (complete_expression): Likewise. * corelow.c (core_open): Likewise. * ctf.c (ctf_start): Likewise. (ctf_write_status): Likewise. (ctf_write_uploaded_tsv): Likewise. (ctf_write_definition_end): Likewise. (ctf_open_dir): Likewise. (ctf_xfer_partial): Likewise. (ctf_trace_find): Likewise. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. (indirect_pieced_value): Likewise. (dwarf2_evaluate_loc_desc_full): Likewise. * dwarf2read.c (dw2_expand_marked_cus): Likewise. (dw2_expand_symtabs_matching): Likewise. (dw2_map_symbol_filenames): Likewise. (read_and_check_comp_unit_head): Likewise. (read_cutu_die_from_dwo): Likewise. (lookup_dwo_unit): Likewise. (read_comp_units_from_section): Likewise. (dwarf2_compute_name): Likewise. (handle_DW_AT_stmt_list): Likewise. (create_cus_hash_table): Likewise. (create_dwp_v2_section): Likewise. (dwarf2_rnglists_process): Likewise. (dwarf2_ranges_process): Likewise. (dwarf2_record_block_ranges): Likewise. (is_vtable_name): Likewise. (read_formatted_entries): Likewise. (skip_form_bytes): Likewise. * elfread.c (elf_symtab_read): Likewise. * exec.c (exec_file_command): Likewise. * f-valprint.c (f_val_print): Likewise. (info_common_command_for_block): Likewise. * guile/guile.c (initialize_scheme_side): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-cmd.c (cmdscm_completer): Likewise. (gdbscm_register_command_x): Likewise. * guile/scm-frame.c (gdbscm_frame_read_var): Likewise. * guile/scm-param.c (gdbscm_parameter_value): Likewise. * guile/scm-ports.c (file_port_magic): Likewise. * guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise. (ppscm_pretty_print_one_value): Likewise. (ppscm_print_children): Likewise. * guile/scm-string.c (gdbscm_string_to_argv): Likewise. * guile/scm-symtab.c (gdbscm_sal_symtab): Likewise. * guile/scm-type.c (gdbscm_type_next_field_x): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * i386-tdep.c (i386_register_reggroup_p): Likewise. * infcmd.c (run_command_1): Likewise. (until_next_fsm_clean_up): Likewise. * linespec.c (linespec_complete): Likewise. (find_label_symbols): Likewise. * m2-valprint.c (m2_val_print): Likewise. * memattr.c (require_user_regions): Likewise. (lookup_mem_region): Likewise. (disable_mem_command): Likewise. (mem_delete): Likewise. * mep-tdep.c (mep_register_name): Likewise. (mep_analyze_prologue): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise. * mi/mi-interp.c (mi_on_sync_execution_done): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (lookup_minimal_symbol): Likewise. * mips-linux-tdep.c (mips64_fill_fpregset): Likewise. * mips-tdep.c (mips_stub_frame_sniffer): Likewise. (mips_o64_return_value): Likewise. (mips_single_step_through_delay): Likewise. (_initialize_mips_tdep): Likewise. * nios2-tdep.c (nios2_push_dummy_call): Likewise. (nios2_software_single_step): Likewise. * parse.c (find_minsym_type_and_address): Likewise. * psymtab.c (psym_relocate): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. (gdbpy_breakpoint_modified): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-record-btrace.c (btpy_list_item): Likewise. * python/py-type.c (typy_str): Likewise. * python/py-value.c (valpy_call): Likewise. * python/python.c (do_start_initialization): Likewise. * record-btrace.c (record_btrace_insn_history_range): Likewise. (record_btrace_call_history_range): Likewise. (record_btrace_record_method): Likewise. (record_btrace_xfer_partial): Likewise. (btrace_get_frame_function): Likewise. * record-full.c (record_full_open): Likewise. * record.c (get_context_size): Likewise. * registry.h (DEFINE_REGISTRY): Likewise. * remote-fileio.c (remote_fileio_request): Likewise. * remote.c (remote_update_thread_list): Likewise. (remote_check_symbols): Likewise. (remote_commit_resume): Likewise. (remote_interrupt): Likewise. (remote_insert_breakpoint): Likewise. (compare_sections_command): Likewise. * rust-exp.y (super_name): Likewise. (lex_string): Likewise. (convert_ast_to_type): Likewise. (convert_ast_to_expression): Likewise. * rust-lang.c (rust_print_struct_def): Likewise. (rust_print_type): Likewise. (rust_evaluate_subexp): Likewise. * rx-tdep.c (rx_register_type): Likewise. * ser-event.c (serial_event_clear): Likewise. * serial.c (serial_open): Likewise. * spu-tdep.c (spu_overlay_new_objfile): Likewise. * symfile.c (section_is_overlay): Likewise. (overlay_unmapped_address): Likewise. (overlay_mapped_address): Likewise. (simple_overlay_update_1): Likewise. (simple_overlay_update): Likewise. * symtab.c (symbol_find_demangled_name): Likewise. (search_symbols): Likewise. * target-descriptions.c (tdesc_predefined_type): Likewise. * target.c (target_commit_resume): Likewise. * thread.c (print_selected_thread_frame): Likewise. * top.c (new_ui_command): Likewise. (gdb_readline_no_editing): Likewise. * tracefile-tfile.c (tfile_open): Likewise. * tracepoint.c (create_tsv_from_upload): Likewise. * utils.c (quit): Likewise. (defaulted_query): Likewise. * valarith.c (value_concat): Likewise. * xml-syscall.c (xml_list_syscalls_by_group): Likewise. * xml-tdesc.c (target_fetch_description_xml): Likewise. * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise. gdb/gdbserver/ChangeLog: * regcache.c (registers_to_string): Remove unused variable. |
||
|
Tom Tromey
|
95a6b0a106 |
Constify execute_command
This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify. |
||
Yao Qi
|
ac7936dfd0 |
s/get_regcache_arch (regcache)/regcache->arch ()/g
This patches removes get_regcache_arch, and use regache->arch () instead. The motivation of this change is that I am going to move some basic stuff into a base class of regcache. I don't need to update "client" code regcache->arch (). On the other hand, this patch shortens the code a little bit. gdb: 2017-10-25 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use regcache->arch () instead get_regcache_arch. * aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers): Likewise. (aarch64_fbsd_store_inferior_registers): Likewise. * aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. * aarch64-tdep.c (aarch64_extract_return_value): Likewise. (aarch64_store_return_value): Likewise. (aarch64_software_single_step): Likewise. * aix-thread.c (aix_thread_wait): Likewise. (supply_reg32): Likewise. (supply_sprs64): Likewise. (supply_sprs32): Likewise. (fill_gprs64): Likewise. (fill_gprs32): Likewise. (fill_sprs64): Likewise. (fill_sprs32): Likewise. (store_regs_user_thread): Likewise. (store_regs_kernel_thread): Likewise. * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise. (alphabsd_store_inferior_registers): Likewise. * alpha-tdep.c (alpha_extract_return_value): Likewise. (alpha_store_return_value): Likewise. (alpha_deal_with_atomic_sequence): Likewise. (alpha_next_pc): Likewise. (alpha_software_single_step): Likewise. * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise. (amd64bsd_store_inferior_registers): Likewise. * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise. (amd64_linux_store_inferior_registers): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise. (amd64obsd_collect_uthread): Likewise. * amd64-tdep.c (amd64_supply_fpregset): Likewise. (amd64_collect_fpregset): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * arc-tdep.c (arc_write_pc): Likewise. * arch-utils.c (default_skip_permanent_breakpoint): Likewise. * arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise. (arm_fbsd_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_vfp_regs): Likewise. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-nbsd-nat.c (arm_supply_gregset): Likewise. (fetch_register): Likewise. (store_register): Likewise. * arm-tdep.c (arm_is_thumb): Likewise. (displaced_in_arm_mode): Likewise. (bx_write_pc): Likewise. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_software_single_step): Likewise. (arm_extract_return_value): Likewise. (arm_store_return_value): Likewise. (arm_write_pc): Likewise. * bfin-tdep.c (bfin_extract_return_value): Likewise. * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * corelow.c (get_core_registers): Likewise. * cris-tdep.c (cris_store_return_value): Likewise. (cris_extract_return_value): Likewise. (find_step_target): Likewise. (find_step_target): Likewise. (cris_software_single_step): Likewise. * ctf.c (ctf_fetch_registers): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * fbsd-tdep.c (fbsd_collect_thread_registers): Likewise. * frv-tdep.c (frv_extract_return_value): Likewise. * ft32-tdep.c (ft32_store_return_value): Likewise. (ft32_extract_return_value): Likewise. * go32-nat.c (fetch_register): Likewise. (go32_fetch_registers): Likewise. (go32_store_registers): Likewise. (store_register): Likewise. * h8300-tdep.c (h8300_extract_return_value): Likewise. (h8300_store_return_value): Likewise. * hppa-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (hppa_linux_fetch_inferior_registers): Likewise. (hppa_linux_store_inferior_registers): Likewise. * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise. (i386_darwin_store_inferior_registers): Likewise. * i386-gnu-nat.c (gnu_fetch_registers): Likewise. (gnu_store_registers): Likewise. * i386-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (supply_gregset): Likewise. (fill_gregset): Likewise. (i386_linux_fetch_inferior_registers): Likewise. (i386_linux_store_inferior_registers): Likewise. (i386_linux_resume): Likewise. * i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Likewise. * i386-obsd-nat.c (i386obsd_supply_pcb): Likewise. * i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise. (i386obsd_collect_uthread): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. (i386_mpx_bd_base): Likewise. * i386-v4-nat.c (supply_fpregset): Likewise. (fill_fpregset): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise. (ia64_linux_store_registers): Likewise. * ia64-tdep.c (ia64_access_rse_reg): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (find_func_descr): Likewise. * inf-child.c (inf_child_fetch_inferior_registers): Likewise. * inf-ptrace.c (inf_ptrace_fetch_registers): Likewise. (inf_ptrace_store_registers): Likewise. * infrun.c (use_displaced_stepping): Likewise. (displaced_step_prepare_throw): Likewise. (resume): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (save_infcall_suspend_state): Likewise. (restore_infcall_suspend_state): Likewise. * iq2000-tdep.c (iq2000_extract_return_value): Likewise. * jit.c (jit_frame_prev_register): Likewise. * linux-nat.c (save_stop_reason): Likewise. (linux_nat_wait_1): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (record_linux_system_call): Likewise. * linux-tdep.c (linux_collect_thread_registers): Likewise. * lm32-tdep.c (lm32_extract_return_value): Likewise. (lm32_store_return_value): Likewise. * m32c-tdep.c (m32c_read_flg): Likewise. (m32c_pseudo_register_read): Likewise. (m32c_pseudo_register_write): Likewise. * m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_store_return_value): Likewise. (m32r_extract_return_value): Likewise. * m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_collect_fpregset): Likewise. * m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise. * m68k-linux-nat.c (fetch_register): Likewise. (old_fetch_inferior_registers): Likewise. (old_store_inferior_registers): Likewise. (store_regs): Likewise. * m68k-tdep.c (m68k_svr4_extract_return_value): Likewise. (m68k_svr4_store_return_value): Likewise. * m88k-tdep.c (m88k_store_arguments): Likewise. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_write_register_values): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise. (mips_fbsd_store_inferior_registers): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. (mips_fbsd_supply_fpregset): Likewise. (mips_fbsd_collect_fpregset): Likewise. (mips_fbsd_supply_gregset): Likewise. (mips_fbsd_collect_gregset): Likewise. * mips-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (supply_fpregset): Likewise. (fill_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset): Likewise. (mips_fill_gregset): Likewise. (mips_supply_fpregset): Likewise. (mips_fill_fpregset): Likewise. (mips64_supply_gregset): Likewise. (micromips_linux_sigframe_validate): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_store_inferior_registers): Likewise. * mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. (mipsnbsd_iterate_over_regset_sections): Likewise. (mipsnbsd_supply_reg): Likewise. (mipsnbsd_supply_fpreg): Likewise. * mips-tdep.c (mips_in_frame_stub): Likewise. (mips_dummy_id): Likewise. (is_octeon_bbit_op): Likewise. (micromips_bc1_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (deal_with_atomic_sequence): Likewise. * moxie-tdep.c (moxie_process_readu): Likewise. * nios2-tdep.c (nios2_get_next_pc): Likewise. * nto-procfs.c (procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise. (ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (fetch_vsx_register): Likewise. (fetch_altivec_register): Likewise. (get_spe_registers): Likewise. (fetch_spe_register): Likewise. (fetch_altivec_registers): Likewise. (fetch_all_gp_regs): Likewise. (fetch_all_fp_regs): Likewise. (store_vsx_register): Likewise. (store_altivec_register): Likewise. (set_spe_registers): Likewise. (store_spe_register): Likewise. (store_altivec_registers): Likewise. (store_all_gp_regs): Likewise. (store_all_fp_regs): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppc_canonicalize_syscall): Likewise. (ppc_linux_record_signal): Likewise. (ppu2spu_prev_register): Likewise. * ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise. (ppcobsd_store_registers): Likewise. * ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers): Likewise. (ppc_ravenscar_generic_store_registers): Likewise. * procfs.c (procfs_fetch_registers): Likewise. (procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers): Likewise. (ravenscar_store_registers): Likewise. (ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers): Likewise. * record-full.c (record_full_wait_1): Likewise. (record_full_registers_change): Likewise. (record_full_store_registers): Likewise. (record_full_core_fetch_registers): Likewise. (record_full_save): Likewise. (record_full_goto_insn): Likewise. * regcache.c (regcache_register_size): Likewise. (get_regcache_arch): Remove. (regcache_read_pc): Likewise. * regcache.h (get_regcache_arch): Remove. * remote-sim.c (gdbsim_fetch_register): Likewise. (gdbsim_store_register): Likewise. * remote.c (fetch_register_using_p): Likewise. (send_g_packet): Likewise. (remote_prepare_to_store): Likewise. (store_registers_using_G): Likewise. * reverse.c (save_bookmark_command): Likewise. (goto_bookmark_command): Likewise. * rs6000-aix-tdep.c (branch_dest): Likewise. * rs6000-nat.c (rs6000_ptrace64): Likewise. (fetch_register): Likewise. * rs6000-tdep.c (ppc_supply_reg): Likewise. (ppc_collect_reg): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (ppc_displaced_step_hw_singlestep): Likewise. (rs6000_pseudo_register_read): Likewise. (rs6000_pseudo_register_write): Likewise. * s390-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (s390_linux_fetch_inferior_registers): Likewise. * s390-linux-tdep.c (s390_write_pc): Likewise. (s390_software_single_step): Likewise. (s390_all_but_pc_registers_record): Likewise. (s390_linux_syscall_record): Likewise. * sentinel-frame.c (sentinel_frame_prev_arch): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise. (shnbsd_store_inferior_registers): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. (sh_extract_return_value_fpu): Likewise. (sh_store_return_value_nofpu): Likewise. (sh_corefile_supply_regset): Likewise. (sh_corefile_collect_regset): Likewise. * sh64-tdep.c (sh64_extract_return_value): Likewise. (sh64_store_return_value): Likewise. * sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers): Likewise. (sparc_store_inferior_registers): Likewise. * sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise. (sparc_ravenscar_prepare_to_store): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc_analyze_control_transfer): Likewise. (sparc_step_trap): Likewise. (sparc_software_single_step): Likewise. (sparc32_gdbarch_init): Likewise. (sparc_supply_rwindow): Likewise. (sparc_collect_rwindow): Likewise. * sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise. * sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise. (sparc64nbsd_collect_gregset): Likewise. (sparc64nbsd_supply_fpregset): Likewise. (sparc64nbsd_collect_fpregset): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-tdep.c (spu_unwind_sp): Likewise. (spu2ppu_prev_register): Likewise. (spu_memory_remove_breakpoint): Likewise. * stack.c (return_command): Likewise. * tic6x-tdep.c (tic6x_extract_signed_field): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (trace_save_ctf): Likewise. * windows-nat.c (do_windows_fetch_inferior_registers): Likewise. (do_windows_store_inferior_registers): Likewise. (windows_resume): Likewise. * xtensa-linux-nat.c (fill_gregset): Likewise. (supply_gregset_reg): Likewise. * xtensa-tdep.c (xtensa_register_write_masked): Likewise. (xtensa_register_read_masked): Likewise. (xtensa_supply_gregset): Likewise. (xtensa_extract_return_value): Likewise. (xtensa_store_return_value): Likewise. |
||
|
Tom Tromey
|
981a3fb359 |
Constify add_prefix_cmd
This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify. |
||
|
Tom Tromey
|
cdb34d4a1c |
Constify some commands in record-btrace.c
gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * record-btrace.c (cmd_record_btrace_bts_start) (cmd_record_btrace_pt_start): Constify. |
||
John Baldwin
|
481695ed5f |
Remove unnecessary function prototypes.
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype. |
||
|
Pedro Alves
|
9a24775b97 |
Introduce gdb_disassembly_flags
For some reason I ended up staring at some of the "int flags" in btrace-related code, and I got confused because I had no clue what the flags where supposed to indicate. Fix that by using enum_flags, so that: #1 - it's clear from the type what the flags are about, and #2 - the compiler can catch mismatching mistakes gdb/ChangeLog: 2017-09-04 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (print_disassembly, disassemble_current_function) (disassemble_command): Use gdb_disassembly_flags instead of bare int. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn) (dump_insns, do_mixed_source_and_assembly_deprecated) (do_mixed_source_and_assembly, do_assembly_only, gdb_disassembly): Use gdb_disassembly_flags instead of bare int. * disasm.h (DISASSEMBLY_SOURCE_DEPRECATED, DISASSEMBLY_RAW_INSN) (DISASSEMBLY_OMIT_FNAME, DISASSEMBLY_FILENAME) (DISASSEMBLY_OMIT_PC, DISASSEMBLY_SOURCE) (DISASSEMBLY_SPECULATIVE): No longer macros. Instead they're... (enum gdb_disassembly_flag): ... values of this new enumeration. (gdb_disassembly_flags): Define. (gdb_disassembly) (gdb_pretty_print_disassembler::pretty_print_insn): Use it. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Use gdb_disassembly_flags instead of bare int. * record-btrace.c (btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range) (record_btrace_insn_history_from): Use gdb_disassembly_flags instead of bare int. * record.c (get_insn_history_modifiers, cmd_record_insn_history): Use gdb_disassembly_flags instead of bare int. * target-debug.h (target_debug_print_gdb_disassembly_flags): Define. * target-delegates.c: Regenerate. * target.c (target_insn_history, target_insn_history_from) (target_insn_history_range): Use gdb_disassembly_flags instead of bare int. * target.h: Include "disasm.h". (struct target_ops) <to_insn_history, to_insn_history_from, to_insn_history_range>: Use gdb_disassembly_flags instead of bare int. (target_insn_history, target_insn_history_from) (target_insn_history_range): Use gdb_disassembly_flags instead of bare int. |
||
|
Simon Marchi
|
0860c437cb |
btrace: Store btrace_insn in an std::vector
Because it contains a non-POD type field (flags), the type btrace_insn should be new'ed/delete'd. Replace the VEC (btrace_insn_s) in btrace_function with an std::vector. gdb/ChangeLog: * btrace.h (btrace_insn_s, DEF_VEC_O (btrace_insn_s)): Remove. (btrace_function) <insn>: Change type to use std::vector. * btrace.c (ftrace_debug, ftrace_call_num_insn, ftrace_find_call, ftrace_new_gap, ftrace_update_function, ftrace_update_insns, ftrace_compute_global_level_offset, btrace_stitch_bts, btrace_clear, btrace_insn_get, btrace_insn_end, btrace_insn_next, btrace_insn_prev): Adjust to change to std::vector. (ftrace_update_insns): Adjust to change to std::vector, change type of INSN parameter. (btrace_compute_ftrace_bts): Adjust call to ftrace_update_insns. * record-btrace.c (btrace_call_history_insn_range, btrace_compute_src_line_range, record_btrace_frame_prev_register): Adjust to change to std::vector. * python/py-record-btrace.c (recpy_bt_func_instructions): Adjust to change to std::vector. |
||
|
Simon Marchi
|
23fdd69e42 |
Make target_waitstatus_to_string return an std::string
A quite straightforward change. It does "fix" leaks in record-btrace.c, although since this is only used in debug printing code, it has no real world impact. gdb/ChangeLog: * target/waitstatus.h (target_waitstatus_to_string): Change return type to std::string. * target/waitstatus.c (target_waitstatus_to_string): Return std::string. * target.h (target_waitstatus_to_string): Remove declaration. * infrun.c (resume, clear_proceed_status_thread, print_target_wait_results, do_target_wait, save_waitstatus, stop_all_threads): Adjust. * record-btrace.c (record_btrace_wait): Adjust. * target-debug.h (target_debug_print_struct_target_waitstatus_p): Adjust. gdb/gdbserver/ChangeLog: * linux-low.c (linux_wait_1): Adjust. * server.c (queue_stop_reply_callback): Adjust. |
||
Tim Wiederhake
|
08c3f6d234 | btrace: Store function segments as objects. | ||
|
Tim Wiederhake
|
4aeb0dfcc4 |
btrace: Replace struct btrace_function::segment.
This used to hold a pair of pointers to the previous and next function segment that belong to this function call. Replace with a pair of indices into the vector of function segments. |
||
|
Tim Wiederhake
|
42bfe59e3a |
btrace: Replace struct btrace_function::up.
This used to hold a function segment pointer. Change it to hold an index into the vector of function segments instead. |
||
|
Tim Wiederhake
|
b54b03bd87 |
btrace: Remove struct btrace_thread_info::{begin,end}.
These are no longer needed and might hold invalid addresses once we change the vector of function segment pointers into a vector of function segment objects where a reallocation of the vector changes the address of its elements. |
||
|
Tim Wiederhake
|
a0f1b96332 |
btrace: Use function segment index in insn iterator.
Remove FUNCTION pointer in struct btrace_insn_iterator and use an index into the list of function segments instead. |
||
|
Tim Wiederhake
|
f158f20875 |
btrace: Use function segment index in call iterator.
Remove FUNCTION pointer in struct btrace_call_iterator and use an index into the list of function segments instead. |
||
|
Tom Tromey
|
2e78302469 |
Use ui_out_emit_tuple
This patch changes various places to use ui_out_emit_tuple, eliminating a number of cleanups. This patch only tackles "easy" cases, which are ones where the cleanups in question were block-structured and did not involve any changes other than the obvious replacement. ChangeLog 2017-04-22 Tom Tromey <tom@tromey.com> * record-btrace.c (record_btrace_insn_history) (record_btrace_insn_history_range, record_btrace_call_history) (record_btrace_call_history_range): Use ui_out_emit_tuple. * thread.c (do_captured_list_thread_ids, print_thread_info_1): Use ui_out_emit_tuple. * stack.c (print_frame_info): Use ui_out_emit_tuple. * solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple. * skip.c (skip_info): Use ui_out_emit_tuple. * remote.c (show_remote_cmd): Use ui_out_emit_tuple. * progspace.c (print_program_space): Use ui_out_emit_tuple. * probe.c (info_probes_for_ops): Use ui_out_emit_tuple. * osdata.c (info_osdata): Use ui_out_emit_tuple. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use ui_out_emit_tuple. * mi/mi-main.c (print_one_inferior, list_available_thread_groups) (output_register, mi_cmd_data_read_memory) (mi_cmd_data_read_memory_bytes, mi_load_progress) (mi_cmd_trace_frame_collected): Use ui_out_emit_tuple. * mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one): Use ui_out_emit_tuple. * mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use ui_out_emit_tuple. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions) (mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple. * linux-thread-db.c (info_auto_load_libthread_db): Use ui_out_emit_tuple. * inferior.c (print_inferior): Use ui_out_emit_tuple. * gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple. * disasm.c (do_mixed_source_and_assembly_deprecated) (do_mixed_source_and_assembly): Use ui_out_emit_tuple. * cp-abi.c (list_cp_abis): Use ui_out_emit_tuple. * cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple. * breakpoint.c (print_one_breakpoint_location) (print_one_breakpoint): Use ui_out_emit_tuple. * auto-load.c (print_script, info_auto_load_cmd): Use ui_out_emit_tuple. * ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple. |
||
|
Pedro Alves
|
9b2eba3dcc |
-Wwrite-strings: execute_command calls with string literals
This is ugly, but it's just making the uglyness explicit. All these places would better be calling some API function directly instead of going through execute_command & friends... gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * event-top.c (command_line_handler): Add cast to execute_command call. * record-btrace.c (cmd_record_btrace_bts_start) (cmd_record_btrace_pt_start, cmd_record_btrace_start) (cmd_record_btrace_start): Add cast to execute_command call. * record-full.c (record_full_goto_insn): * record.c (record_start, record_stop): Add cast to execute_command_to_string calls. (cmd_record_start): Add cast to execute_command calls. |
||
|
Simon Marchi
|
bcc0c096d5 |
Use ptid from regcache in almost all remaining nat files
This patch contains almost all of the remaining changes needed to make to_fetch_registers/to_store_registers/to_prepare_to_store independent of inferior_ptid. It contains only some "trivial" changes, the more complicated ones are in separate patches. gdb/ChangeLog: * i386-linux-nat.c (fetch_register, store_register, i386_linux_fetch_inferior_registers, i386_linux_store_inferior_registers): Use ptid from regcache. * ia64-linux-nat.c (ia64_linux_fetch_register, ia64_linux_store_register): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register, inf_ptrace_store_register): Likewise. * m32r-linux-nat.c (m32r_linux_fetch_inferior_registers, m32r_linux_store_inferior_registers): Likewise. * m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers, m68kbsd_store_inferior_registers): Likewise. * m68k-linux-nat.c (fetch_register, store_register, m68k_linux_fetch_inferior_registers, m68k_linux_store_inferior_registers): Likewise. * m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers, m88kbsd_store_inferior_registers): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers, mips_fbsd_store_inferior_registers): Likewise. * mips-linux-nat.c (mips64_linux_regsets_fetch_registers, mips64_linux_regsets_store_registers): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers, mipsnbsd_store_inferior_registers): Likewise. * mips-obsd-nat.c (mips64obsd_fetch_inferior_registers, mips64obsd_store_inferior_registers): Likewise. * nto-procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers, ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (ppc_linux_fetch_inferior_registers, ppc_linux_store_inferior_registers): Likewise. * ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers, ppcnbsd_store_inferior_registers): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers, ppcobsd_store_registers): Likewise. * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers, ravenscar_store_registers, ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers, record_btrace_store_registers, record_btrace_prepare_to_store): Likewise. * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Lookup inferior using ptid from regcache, instead of current_inferior. * remote.c (remote_fetch_registers, remote_store_registers): Use ptid from regcache. * rs6000-nat.c (fetch_register, store_register): Likewise. * s390-linux-nat.c (s390_linux_fetch_inferior_registers, s390_linux_store_inferior_registers): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Likewise. * sol-thread.c (sol_thread_fetch_registers, sol_thread_store_registers): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers, sparc_store_inferior_registers): Likewise. * tilegx-linux-nat.c (fetch_inferior_registers, store_inferior_registers): Likewise. * vax-bsd-nat.c (vaxbsd_fetch_inferior_registers, vaxbsd_store_inferior_registers): Likewise. * xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs, store_xtregs): Likewise. |
||
|
Tim Wiederhake
|
b158a20f26 |
Add method to query current recording method to target_ops.
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog * record-btrace.c (record_btrace_record_method): New function. (init_record_btrace_ops): Initialize to_record_method. * record-full.c (record_full_record_method): New function. (init_record_full_ops, init_record_full_core_ops): Add record_full_record_method. * record.h (enum record_method): New enum. * target-debug.h (target_debug_print_enum_record_method: New define. * target-delegates.c: Regenerate. * target.c (target_record_method): New function. * target.h: Include record.h. (struct target_ops) <to_record_method>: New field. (target_record_method): New export. Change-Id: I05daa70e4e08a19901e848c731bb7d60cd87cc5a |
||
|
Tim Wiederhake
|
508352a9bf |
btrace: Export btrace_decode_error function.
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * record-btrace.c (btrace_ui_out_decode_error): Move most of it ... * btrace.c (btrace_decode_error): ... here. New function. * btrace.h (btrace_decode_error): New export. Change-Id: I2b4b43a55dbfd9f526a540d2ad52a6708f31feba |
||
|
Tim Wiederhake
|
69090ceead |
btrace: Count gaps as one instruction explicitly.
This gives all instructions, including gaps, a unique number. Add a function to retrieve the error code if a btrace instruction iterator points to an invalid instruction. Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * btrace.c (ftrace_call_num_insn, btrace_insn_get_error): New function. (ftrace_new_function, btrace_insn_number, btrace_insn_cmp, btrace_find_insn_by_number): Remove special case for gaps. * btrace.h (btrace_insn_get_error): New export. (btrace_insn_number, btrace_find_insn_by_number): Adjust comment. * record-btrace.c (btrace_insn_history): Print number for gaps. (record_btrace_info, record_btrace_goto): Handle gaps. Change-Id: I8eb0e48a95f4278522fea74ea13526bfe6898ecc |
||
|
Pedro Alves
|
8b172ce7c9 |
Reuse buffers across gdb_pretty_print_insn calls
gdb_pretty_print_insn allocates and destroys a couple local buffers each time it is called, which can be many times when disassembling a region of memory. Avoid that overhead by adding a new class that holds the buffers and making gdb_pretty_print_insn a method of that class, so that the buffers can be reused across calls. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * disasm.c (gdb_pretty_print_insn): Rename to ... (gdb_pretty_print_disassembler::pretty_print_insn): ... this. Remove gdbarch parameter. Adapt to clear the object's buffers instead of allocating new buffers, and to print using the object's gdb_disassembler instead of calling gdb_print_insn. (dump_insns): Use gdb_pretty_print_disassembler. * disasm.h (gdb_pretty_print_insn): Delete declaration. (gdb_pretty_print_disassembler): New class. * record-btrace.c (btrace_insn_history): Use gdb_pretty_print_disassembler. |
||
|
Pedro Alves
|
187808b04f |
Add back gdb_pretty_print_insn
ui_file_rewind is a ui_file method that only really works with mem buffer files, and is a nop on other ui_file types. It'd be desirable to eliminate it from the base ui_file interface, and move it to the "mem_fileopen" subclass of ui_file instead. A following patch does just that. Unfortunately, there are a couple references to ui_file_rewind inside gdb_disassembler::pretty_print_insn that were made harder to eliminate with the recent addition of the gdb_disassembler wrapper. Before the gdb_disassembler wrapper was added, in commit |
||
|
Markus Metzger
|
cd4007e434 |
btrace: allow recording to be started (and stopped) for running threads
When recording is started for a running thread, GDB was able to start tracing but then failed to read registers to insert the initial entry for the current PC. We don't really need that initial entry if we don't know where exactly we started recording. Skip that step to allow recording to be started while threads are running. If we do run into errors, we need to undo the tracing enable to not leak this thread. The operation did not complete so our caller won't clean up this thread. For the BTRACE_FORMAT_PT btrace format, we don't need that initial entry since it will be recorded in the trace. We can omit the call to btrace_add_pc. gdb/ * btrace.c (btrace_enable): Do not call btrace_add_pc for BTRACE_FORMAT_PT or if can_access_registers_ptid returns false. (btrace_fetch): Assert can_access_registers_ptid. * record-btrace.c (require_btrace_thread, record_btrace_info): Call validate_registers_access. testsuite/ * gdb.btrace/enable-running.c: New. * gdb.btrace/enable-running.exp: New. |
||
|
Yao Qi
|
e47ad6c0bd |
Refactor disassembly code
This patch addes class gdb_disassembler, and refactor code to use it. The gdb_disassembler object is saved in disassember_info.application_data. However, disassember_info.application_data is already used by gdb for arm, mips spu, and scm-disasm. In arm and mips, .application_data is gdbarch, but we can still get gdbarch from gdb_disassember. The use of application_data in spu is a little bit complicated. It creates its own disassemble_info, and save spu_dis_asm_data in .application_data. This will overwrite the pointer to gdb_disassembler, so we need to find another place to save spu_dis_asm_data. I extend disassemble_info, and put "id" there. gdb: 2017-01-26 Pedro Alves <palves@redhat.com> Yao Qi <yao.qi@linaro.org> * arm-tdep.c: Include "disasm.h". (gdb_print_insn_arm): Update code to get gdbarch. * disasm.c (dis_asm_read_memory): Change it to gdb_disassembler::dis_asm_read_memory. (dis_asm_memory_error): Likewise. (dis_asm_print_address): Likewise. (gdb_pretty_print_insn): Change it to gdb_disassembler::pretty_print_insn. (dump_insns): Add one argument gdb_disassemlber. All callers updated. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. (do_assembly_only): Likewise. (gdb_disassembler::gdb_disassembler): New. (gdb_disassembler::print_insn): New. * disasm.h (class gdb_disassembler): New. (gdb_pretty_print_insn): Remove declaration. (gdb_disassemble_info): Likewise. * guile/scm-disasm.c (class gdbscm_disassembler): New. (gdbscm_disasm_read_memory_worker): Update. (gdbscm_disasm_read_memory): Update. (gdbscm_disasm_memory_error): Remove. (gdbscm_disasm_print_address): Remove. (gdbscm_disassembler::gdbscm_disassembler): New. (gdbscm_print_insn_from_port): Update. * mips-tdep.c: Include disasm.h. (gdb_print_insn_mips): Update code to get gdbarch. * record-btrace.c (btrace_insn_history): Update. * spu-tdep.c: Include disasm.h. (struct spu_dis_asm_data): Remove. (struct spu_dis_asm_info): New. (spu_dis_asm_print_address): Use spu_dis_asm_info to get SPU id. (gdb_print_insn_spu): Cast disassemble_info to spu_dis_asm_info. |
||
|
Joel Brobecker
|
61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
|
Simon Marchi
|
112e8700a6 |
Class-ify ui_out
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
|
||
|
Markus Metzger
|
b61ce85cc5 |
btrace: allow leading trace gaps
GDB ignores trace gaps from decode errors or overflows at the beginning of the
trace. There isn't really a gap in the trace; the trace just starts a bit
later than expected.
In cases where there is no trace at all or where the trace is smaller than
expected, this may hide the reason for the missing trace.
Allow leading trace gaps. They will be shown as decode warnings and by the
record function-call-history command.
(gdb) info record
Active record target: record-btrace
Recording format: Intel Processor Trace.
Buffer size: 16kB.
warning: Decode error (-6) at instruction 0 (offset = 0x58, pc = 0x0): unexpected packet context.
warning: Decode error (-6) at instruction 0 (offset = 0xb0, pc = 0x0): unexpected packet context.
warning: Decode error (-6) at instruction 0 (offset = 0x168, pc = 0x0): unexpected packet context.
warning: Decode error (-6) at instruction 54205 (offset = 0xe08, pc = 0x0): unexpected packet context.
warning: Decode error (-6) at instruction 54205 (offset = 0xe60, pc = 0x0): unexpected packet context.
warning: Decode error (-6) at instruction 54205 (offset = 0xed8, pc = 0x0): unexpected packet context.
Recorded 91582 instructions in 1111 functions (6 gaps) for thread 1 (process 15710).
(gdb) record function-call-history /c 1
1 [decode error (-6): unexpected packet context]
2 [decode error (-6): unexpected packet context]
3 [decode error (-6): unexpected packet context]
4 _dl_addr
5 ??
6 _dl_addr
7 ??
8 ??
9 ??
10 ??
Leading trace gaps will not be shown by the record instruction-history command
without further changes.
gdb/
* btrace.c (btrace_compute_ftrace_bts, ftrace_add_pt): Allow leading gaps.
* record-btrace.c (record_btrace_single_step_forward)
(record_btrace_single_step_backward): Jump back to last instruction if
step ends at a gap.
(record_btrace_goto_begin): Skip gaps.
|
||
|
Pedro Alves
|
85ad3aaf40 |
gdb: Coalesce/aggregate (async) vCont packets/actions
Currently, with "maint set target-non-stop on", that is, when gdb
connects with the non-stop/asynchronous variant of the remote
protocol, even with "set non-stop off", GDB always sends one vCont
packet per thread resumed. This patch makes GDB aggregate and
coalesce vCont packets, so we send vCont packets like "vCont;s:p1.1;c"
in non-stop mode too.
Basically, this is done by:
- Adding a new target method target_commit_resume that is called
after calling target_resume one or more times. When resuming a
batch of threads, we'll only call target_commit_resume once after
calling target_resume for all threads.
- Making the remote target defer sending the actual vCont packet to
target_commit_resume.
Special care must be taken to avoid sending a vCont action with a
"wildcard" thread-id (all threads of process / all threads) when that
would resume threads/processes that should not be resumed. See
remote_commit_resume comments for details.
Unlike all-stop's remote_resume implementation, this handles the case
of too many actions resulting in a too-big vCont packet, by flushing
the vCont packet and starting a new one.
E.g., imagining that the "c" action in:
vCont;s:1;c
overflows the packet buffer, we split the actions like:
vCont;s:1
vCont;c
Tested on x86_64 Fedora 20, with and without "maint set
target-non-stop on".
Also tested with a hack that makes remote_commit_resume flush the vCont
packet after every action appended (which caught a few bugs).
gdb/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
* infrun.c (do_target_resume): Call target_commit_resume.
(proceed): Defer target_commit_resume while looping over threads,
resuming them. Call target_commit_resume at the end.
* record-btrace.c (record_btrace_commit_resume): New function.
(init_record_btrace_ops): Install it as to_commit_resume method.
* record-full.c (record_full_commit_resume): New function.
(record_full_wait_1): Call the beneath target's to_commit_resume
method.
(init_record_full_ops): Install record_full_commit_resume as
to_commit_resume method.
* remote.c (struct private_thread_info) <last_resume_step,
last_resume_sig, vcont_resumed>: New fields.
(remote_add_thread): Set the new thread's vcont_resumed flag.
(demand_private_info): Delete.
(get_private_info_thread, get_private_info_ptid): New functions.
(remote_update_thread_list): Adjust.
(process_initial_stop_replies): Clear the thread's vcont_resumed
flag.
(remote_resume): If connected in non-stop mode, record the resume
request and return early.
(struct private_inferior): New.
(struct vcont_builder): New.
(vcont_builder_restart, vcont_builder_flush)
(vcont_builder_push_action): New functions.
(MAX_ACTION_SIZE): New macro.
(remote_commit_resume): New function.
(thread_pending_fork_status, is_pending_fork_parent_thread): New
functions.
(check_pending_event_prevents_wildcard_vcont_callback)
(check_pending_events_prevent_wildcard_vcont): New functions.
(process_stop_reply): Adjust. Clear the thread's vcont_resumed
flag.
(init_remote_ops): Install remote_commit_resume.
* target-delegates.c: Regenerate.
* target.c (defer_target_commit_resume): New global.
(target_commit_resume, make_cleanup_defer_target_commit_resume):
New functions.
* target.h (struct target_ops) <to_commit_resume>: New field.
(target_resume): Update comments.
(target_commit_resume): New declaration.
|
||
|
Pedro Alves
|
325fac504a |
gdb: Use std::min and std::max throughout
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
||
|
Pedro Alves
|
7397181903 |
Plumb enum remove_bp_reason all the way to target_remove_breakpoint
So the target knows whether we're detaching breakpoints. Nothing uses the parameter in this patch yet. gdb/ChangeLog: 2016-08-10 Pedro Alves <palves@redhat.com> PR gdb/19187 * break-catch-sig.c (signal_catchpoint_remove_location): Adjust interface. * break-catch-syscall.c (remove_catch_syscall): * breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h. (remove_breakpoint_1): Pass 'reason' down. (remove_catch_fork, remove_catch_vfork, remove_catch_solib) (remove_catch_exec, remove_watchpoint, remove_masked_watchpoint) (base_breakpoint_remove_location, bkpt_remove_location) (bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust interface. * breakpoint.h (enum remove_bp_reason): Moved here from breakpoint.c. (struct breakpoint_ops) <remove_location>: Add 'reason' parameter. * corelow.c (core_remove_breakpoint): New function. (init_core_ops): Install it as to_remove_breakpoint method. * exec.c (exec_remove_breakpoint): New function. (init_exec_ops): Install it as to_remove_breakpoint method. * mem-break.c (memory_remove_breakpoint): Adjust interface. * record-btrace.c (record_btrace_remove_breakpoint): Adjust interface. * record-full.c (record_full_remove_breakpoint) (record_full_core_remove_breakpoint): Adjust interface. * remote.c (remote_remove_breakpoint): Adjust interface. * target-debug.h (target_debug_print_enum_remove_bp_reason): New macro. * target-delegates.c: Regenerate. * target.c (target_remove_breakpoint): Add 'reason' parameter. * target.h (struct target_ops) <to_remove_breakpoint>: Add 'reason' parameter. (target_remove_breakpoint, memory_remove_breakpoint): Add 'reason' parameter. |
||
|
Tim Wiederhake
|
c0272db585 |
btrace: Resume recording after disconnect.
This patch allows gdbserver to continue recording after disconnect. On reconnect, the recorded data is accessible to gdb as if no disconnect happened. A possible application for this feature is remotely examine bugs that occur at irregular intervals, where maintaining a gdb connection is inconvenient. This also fixes the issue mentioned here: https://sourceware.org/ml/gdb-patches/2015-11/msg00424.html Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * NEWS: Resume btrace on reconnect. * record-btrace.c: Added record-btrace.h include. (record_btrace_open): Split into this and ... (record_btrace_push_target): ... this. (record_btrace_disconnect): New function. (init_record_btrace_ops): Use record_btrace_disconnect. * record-btrace.h: New file. * remote.c: Added record-btrace.h include. (remote_start_remote): Check recording status. (remote_btrace_maybe_reopen): New function. gdb/doc/ChangeLog: * gdb.texinfo: Resume btrace on reconnect. gdb/testsuite/ChangeLog: * gdb.btrace/reconnect.c: New file. * gdb.btrace/reconnect.exp: New file. Change-Id: I95e8b0ab8a89e58591aba0e63818cee82fd211bc |
||
|
Simon Marchi
|
38b022b445 |
Add method/format information to =record-started
Eclipse CDT now supports enabling execution recording using two methods (full and btrace) and both formats for btrace (bts and pt). In the event that recording is enabled behind the back of the GUI (by the user on the command line, or a script), we need to know which method/format are being used, so it can be correctly reflected in the interface. This patch adds this information to the =record-started async record. Before: =record-started,thread-group="i1" After: =record-started,thread-group="i1",method="btrace",format="bts" =record-started,thread-group="i1",method="btrace",format="pt" =record-started,thread-group="i1",method="full" The "format" field is only present when the current method supports multiple formats (only the btrace method as of now). gdb/ChangeLog: * NEWS: Mention the new fields in =record-started. * common/btrace-common.h (btrace_format_short_string): New function declaration. * common/btrace-common.c (btrace_format_short_string): New function. * mi/mi-interp.c (mi_record_changed): Output method and format fields in the =record-started record. * record-btrace.c (record_btrace_open): Adapt record_changed notification. * record-full.c (record_full_open): Likewise. * record.c (cmd_record_stop): Likewise. gdb/doc/ChangeLog: * gdb.texinfo (GDB/MI Async Records): Document method and format fields in =record-started. * observer.texi (record_changed): Add method and format parameters. gdb/testsuite/ChangeLog: * gdb.mi/mi-record-changed.exp: Adjust =record-started output matching. |
||
|
Pedro Alves
|
5d5658a1d3 |
Per-inferior/Inferior-qualified thread IDs
This commit changes GDB to track thread numbers per-inferior. Then, if you're debugging multiple inferiors, GDB displays "inferior-num.thread-num" instead of just "thread-num" whenever it needs to display a thread: (gdb) info inferiors Num Description Executable 1 process 6022 /home/pedro/gdb/tests/threads * 2 process 6037 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame 1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running) 1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running) 1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running) 2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running) 2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running) * 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running) (gdb) ... (gdb) thread 1.1 [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))] (gdb) ... etc. You can still use "thread NUM", in which case GDB infers you're referring to thread NUM of the current inferior. The $_thread convenience var and Python's InferiorThread.num attribute are remapped to the new per-inferior thread number. It's a backward compatibility break, but since it only matters when debugging multiple inferiors, I think it's worth doing. Because MI thread IDs need to be a single integer, we keep giving threads a global identifier, _in addition_ to the per-inferior number, and make MI always refer to the global thread IDs. IOW, nothing changes from a MI frontend's perspective. Similarly, since Python's Breakpoint.thread and Guile's breakpoint-thread/set-breakpoint-thread breakpoint methods need to work with integers, those are adjusted to work with global thread IDs too. Follow up patches will provide convenient means to access threads' global IDs. To avoid potencially confusing users (which also avoids updating much of the testsuite), if there's only one inferior and its ID is "1", IOW, the user hasn't done anything multi-process/inferior related, then the "INF." part of thread IDs is not shown. E.g,.: (gdb) info inferiors Num Description Executable * 1 process 15275 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) add-inferior Added inferior 2 (gdb) info threads Id Target Id Frame * 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * NEWS: Mention that thread IDs are now per inferior and global thread IDs. * Makefile.in (SFILES): Add tid-parse.c. (COMMON_OBS): Add tid-parse.o. (HFILES_NO_SRCDIR): Add tid-parse.h. * ada-tasks.c: Adjust to use ptid_to_global_thread_id. * breakpoint.c (insert_breakpoint_locations) (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions) (print_one_breakpoint_location, set_longjmp_breakpoint) (check_longjmp_breakpoint_for_call_dummy) (set_momentary_breakpoint): Adjust to use global IDs. (find_condition_and_thread, watch_command_1): Use parse_thread_id. (until_break_command, longjmp_bkpt_dtor) (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust to use global IDs. * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use ptid_to_global_thread_id. * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. * gdbthread.h (struct thread_info): Rename field 'num' to 'global_num. Add new fields 'per_inf_num' and 'inf'. (thread_id_to_pid): Rename thread_id_to_pid to global_thread_id_to_ptid. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (find_thread_id): Rename to ... (find_thread_global_id): ... this. (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare. (print_thread_info): Add comment. * tid-parse.h: New file. * tid-parse.c: New file. * infcmd.c (step_command_fsm_prepare) (step_command_fsm_should_stop): Adjust to use the global thread ID. (until_next_command, until_next_command) (finish_command_fsm_should_stop): Adjust to use the global thread ID. (attach_post_wait): Adjust to check the inferior number too. * inferior.h (struct inferior) <highest_thread_num>: New field. * infrun.c (handle_signal_stop) (insert_exception_resume_breakpoint) (insert_exception_resume_from_probe): Adjust to use the global thread ID. * record-btrace.c (record_btrace_open): Use global thread IDs. * remote.c (process_initial_stop_replies): Also consider the inferior number. * target.c (target_pre_inferior): Clear the inferior's highest thread num. * thread.c (clear_thread_inferior_resources): Adjust to use the global thread ID. (new_thread): New inferior parameter. Adjust to use it. Set both the thread's global ID and the thread's per-inferior ID. (add_thread_silent): Adjust. (find_thread_global_id): New. (find_thread_id): Make static. Adjust to rename. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (thread_id_to_pid): Rename to ... (global_thread_id_to_ptid): ... this. Adjust. (first_thread_of_process): Adjust. (do_captured_list_thread_ids): Adjust to use global thread IDs. (should_print_thread): New function. (print_thread_info): Rename to ... (print_thread_info_1): ... this, and add new show_global_ids parameter. Handle it. Iterate over inferiors. (print_thread_info): Reimplement as wrapper around print_thread_info_1. (show_inferior_qualified_tids): New function. (print_thread_id): Use it. (tp_array_compar): Compare inferior numbers too. (thread_apply_command): Use tid_range_parser. (do_captured_thread_select): Use parse_thread_id. (thread_id_make_value): Adjust. (_initialize_thread): Adjust "info threads" help string. * varobj.c (struct varobj_root): Update comment. (varobj_create): Adjust to use global thread IDs. (value_of_root_1): Adjust to use global_thread_id_to_ptid. * windows-tdep.c (display_tib): No longer accept an argument. * cli/cli-utils.c (get_number_trailer): Make extern. * cli/cli-utils.h (get_number_trailer): Declare. (get_number_const): Adjust documentation. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global thread IDs. * mi/mi-interp.c (mi_new_thread, mi_thread_exit) (mi_on_normal_stop, mi_output_running_pid, mi_on_resume): * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise. * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x): Likewise. * python/py-breakpoint.c (bppy_set_thread): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. * python/py-infthread.c (thpy_get_num): Add comment and return the per-inferior thread ID. (thread_object_getset): Update comment of "num". gdb/testsuite/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.base/break.exp: Adjust to output changes. * gdb.base/hbreak2.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/watch_thread_num.exp: Likewise. * gdb.linespec/keywords.exp: Likewise. * gdb.multi/info-threads.exp: Likewise. * gdb.threads/thread-find.exp: Likewise. * gdb.multi/tids.c: New file. * gdb.multi/tids.exp: New file. gdb/doc/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Document per-inferior thread IDs, qualified thread IDs, global thread IDs and thread ID lists. (Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to thread IDs. (Convenience Vars): Document the $_thread convenience variable. (Ada Tasks): Adjust to refer to thread IDs. (GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking Commands, GDB/MI Variable Objects): Update to mention global thread IDs. * guile.texi (Breakpoints In Guile) <breakpoint-thread/set-breakpoint-thread breakpoint>: Mention global thread IDs instead of thread IDs. * python.texi (Threads In Python): Adjust documentation of InferiorThread.num. (Breakpoint.thread): Mention global thread IDs instead of thread IDs. |
||
|
Pedro Alves
|
43792cf0de |
Centralize thread ID printing
Add a new function to print a thread ID, in the style of paddress, plongest, etc. and adjust all CLI-reachable paths to use it. This gives us a single place to tweak to print inferior-qualified thread IDs later: - [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))] + [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))] etc., though for now, this has no user-visible change. No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * breakpoint.c (remove_threaded_breakpoints) (print_one_breakpoint_location): Use print_thread_id. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Use print_thread_id. * common/print-utils.c (CELLSIZE): Delete. (get_cell): Rename to ... (get_print_cell): ... this and made extern. Adjust call callers. Adjust to use PRINT_CELL_SIZE. * common/print-utils.h (get_print_cell): Declare. (PRINT_CELL_SIZE): New. * gdbthread.h (print_thread_id): Declare. * infcmd.c (signal_command): Use print_thread_id. * inferior.c (print_inferior): Use print_thread_id. * infrun.c (handle_signal_stop) (insert_exception_resume_breakpoint) (insert_exception_resume_from_probe) (print_signal_received_reason): Use print_thread_id. * record-btrace.c (record_btrace_info) (record_btrace_resume_thread, record_btrace_cancel_resume) (record_btrace_step_thread, record_btrace_wait): Use print_thread_id. * thread.c (thread_apply_all_command): Use print_thread_id. (print_thread_id): New function. (thread_apply_command): Use print_thread_id. (thread_command, thread_find_command, do_captured_thread_select): Use print_thread_id. |
||
|
Pedro Alves
|
bc504a3117 |
Remove trademark acknowledgements throughout
The GNU Coding Standards say: "Please do not include any trademark acknowledgements in GNU software packages or documentation." gdb/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout. gdb/gdbserver/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout. gdb/doc/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout. |
||
|
Joel Brobecker
|
618f726fcb |
GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
||
|
Pedro Alves
|
8d297bbf60 |
Type-safe wrapper for enum flags
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
|
||
|
Markus Metzger
|
f94cc8975c |
btrace: change record instruction-history /m
The /m modifier interleaves source lines with the disassembly of recorded instructions. This calls disasm.c's gdb_disassembly once for each recorded instruction to be printed. This doesn't really work because gdb_disassembly may choose not to print anything in some situations. And if it does print something, the output interferes with btrace_insn_history's output around it. It further results in a separate asm_insns list for each instruction in MI. Even though there is no MI support for target record, yet, we fix this obvious issue. Change record instruction-history /m to use the new gdb_pretty_print_insn function for printing a single instruction and interleave source lines as appropriate. We cannot reuse the new disasm.c do_mixed_source_and_assembly function without significant changes to it. gdb/ * record-btrace.c (struct btrace_line_range): New. (btrace_mk_line_range, btrace_line_range_add) (btrace_line_range_is_empty, btrace_line_range_contains_range) (btrace_find_line_range, btrace_print_lines): New. (btrace_insn_history): Add source interleaving algorithm. |
||
|
Markus Metzger
|
04c4fe8c59 |
btrace: fix void return
record_btrace_resume returns the void return from the to_resume method of the target beneath. Split this into calling to_resume and return. gdb/ * record-btrace.c (record_btrace_resume): Fix void return. |
||
|
Simon Marchi
|
19ba03f495 |
Add some more casts (2/2)
See previous patch's description. gdb/ChangeLog: * macrocmd.c (print_macro_callback): Add cast(s). * macrotab.c (macro_bcache_str): Likewise. (new_macro_definition): Likewise. * main.c (captured_main): Likewise. * maint.c (print_bfd_section_info): Likewise. * mdebugread.c (mdebug_build_psymtabs): Likewise. (basic_type): Likewise. * memattr.c (mem_region_cmp): Likewise. * memory-map.c (memory_map_start_memory): Likewise. (memory_map_end_memory): Likewise. (memory_map_start_property): Likewise. (memory_map_end_property): Likewise. (clear_result): Likewise. * memrange.c (compare_mem_ranges): Likewise. * mep-tdep.c (mep_analyze_frame_prologue): Likewise. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise. * mi/mi-console.c (mi_console_file_delete): Likewise. (mi_console_file_fputs): Likewise. (mi_console_raw_packet): Likewise. (mi_console_file_flush): Likewise. (mi_console_set_raw): Likewise. * mi/mi-interp.c (mi_interpreter_resume): Likewise. (mi_new_thread): Likewise. (mi_thread_exit): Likewise. (mi_record_changed): Likewise. (mi_inferior_added): Likewise. (mi_inferior_appeared): Likewise. (mi_inferior_exit): Likewise. (mi_inferior_removed): Likewise. (mi_interp_data): Likewise. (mi_on_normal_stop): Likewise. (mi_traceframe_changed): Likewise. (mi_tsv_created): Likewise. (mi_tsv_deleted): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. (mi_output_running_pid): Likewise. (mi_inferior_count): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (report_initial_inferior): Likewise. (mi_ui_out): Likewise. (mi_set_logging): Likewise. * mi/mi-main.c (collect_cores): Likewise. (print_one_inferior): Likewise. (free_vector_of_ints): Likewise. (free_splay_tree): Likewise. (mi_execute_command): Likewise. * mi/mi-out.c (mi_table_body): Likewise. (mi_table_end): Likewise. (mi_table_header): Likewise. (mi_begin): Likewise. (mi_end): Likewise. (mi_field_int): Likewise. (mi_field_string): Likewise. (mi_field_fmt): Likewise. (mi_flush): Likewise. (mi_redirect): Likewise. (field_separator): Likewise. (mi_open): Likewise. (mi_close): Likewise. (mi_out_buffered): Likewise. (mi_out_rewind): Likewise. (mi_out_put): Likewise. (mi_version): Likewise. (mi_out_data_dtor): Likewise. * mi/mi-parse.c (mi_parse_cleanup): Likewise. * microblaze-tdep.c (microblaze_frame_cache): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. (lzma_close): Likewise. (lzma_stat): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-sde-tdep.c (mips_sde_frame_cache): Likewise. (mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise. * mips-tdep.c (mips_insn16_frame_cache): Likewise. (mips_micro_frame_cache): Likewise. (mips_insn32_frame_cache): Likewise. (mips_stub_frame_cache): Likewise. (gdb_print_insn_mips): Likewise. (value_of_mips_user_reg): Likewise. (mips_gdbarch_init): Likewise. * mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. * mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise. * mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise. * moxie-tdep.c (moxie_frame_cache): Likewise. * msp430-tdep.c (msp430_get_opcode_byte): Likewise. (msp430_analyze_frame_prologue): Likewise. * mt-tdep.c (mt_frame_unwind_cache): Likewise. * nios2-linux-tdep.c (nios2_supply_gregset): Likewise. (nios2_collect_gregset): Likewise. * nios2-tdep.c (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. * objc-lang.c (find_methods): Likewise. * objfiles.c (objfiles_pspace_data_cleanup): Likewise. (get_objfile_pspace_data): Likewise. (get_objfile_bfd_data): Likewise. (objfile_bfd_data_free): Likewise. (add_to_objfile_sections): Likewise. (do_free_objfile_cleanup): Likewise. (resume_section_map_updates_cleanup): Likewise. * opencl-lang.c (builtin_opencl_type): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * osdata.c (osdata_start_osdata): Likewise. (osdata_start_item): Likewise. (osdata_start_column): Likewise. (osdata_end_column): Likewise. (clear_parsing_data): Likewise. (osdata_free_cleanup): Likewise. * parse.c (type_stack_cleanup): Likewise. (exp_uses_objfile_iter): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppu2spu_prev_arch): Likewise. (ppu2spu_this_id): Likewise. (ppu2spu_prev_register): Likewise. (ppu2spu_unwind_register): Likewise. (ppu2spu_sniffer): Likewise. (ppu2spu_dealloc_cache): Likewise. (ppc_linux_init_abi): Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * progspace.c (restore_program_space): Likewise. * psymtab.c (find_pc_sect_psymtab): Likewise. (compare_psymbols): Likewise. (psymbol_bcache_full): Likewise. (allocate_psymtab): Likewise. (discard_psymtabs_upto): Likewise. * python/py-block.c (set_block): Likewise. (del_objfile_blocks): Likewise. * python/py-breakpoint.c (build_bp_list): Likewise. * python/py-inferior.c (inferior_to_inferior_object): Likewise. (build_inferior_list): Likewise. (py_free_inferior): Likewise. * python/py-objfile.c (py_free_objfile): Likewise. (objfile_to_objfile_object): Likewise. * python/py-prettyprint.c (py_restore_tstate): Likewise. * python/py-progspace.c (py_free_pspace): Likewise. (pspace_to_pspace_object): Likewise. * python/py-symbol.c (set_symbol): Likewise. (del_objfile_symbols): Likewise. * python/py-symtab.c (set_sal): Likewise. (set_symtab): Likewise. (del_objfile_symtab): Likewise. (del_objfile_sal): Likewise. * python/py-type.c (save_objfile_types): Likewise. (set_type): Likewise. * python/py-unwind.c (pyuw_prev_register): Likewise. (pyuw_on_new_gdbarch): Likewise. * python/py-utils.c (py_decref): Likewise. (py_xdecref): Likewise. (gdb_py_generic_dict): Likewise. * python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise. (gdbpy_clone_xmethod_worker_data): Likewise. (gdbpy_get_xmethod_arg_types): Likewise. (gdbpy_get_xmethod_result_type): Likewise. (gdbpy_invoke_xmethod): Likewise. * python/python.c (gdbpy_apply_type_printers): Likewise. (gdbpy_free_type_printers): Likewise. * record-btrace.c (record_btrace_disable_callback): Likewise. (bfcache_hash): Likewise. (bfcache_eq): Likewise. (btrace_get_frame_function): Likewise. (record_btrace_frame_unwind_stop_reason): Likewise. (record_btrace_frame_this_id): Likewise. (record_btrace_frame_prev_register): Likewise. (record_btrace_frame_dealloc_cache): Likewise. * record-full.c (record_full_message_wrapper): Likewise. (record_full_save_cleanups): Likewise. * regcache.c (regcache_descr): Likewise. (do_regcache_xfree): Likewise. (do_regcache_invalidate): Likewise. (do_cooked_read): Likewise. (regcache_transfer_regset): Likewise. * reggroups.c (reggroup_add): Likewise. (reggroup_next): Likewise. (reggroup_prev): Likewise. * remote-fileio.c (do_remote_fileio_request): Likewise. * remote-notif.c (remote_async_get_pending_events_handler): Likewise. (do_notif_event_xfree): Likewise. * remote.c (get_remote_arch_state): Likewise. (remote_pspace_data_cleanup): Likewise. (get_remote_exec_file): Likewise. (set_pspace_remote_exec_file): Likewise. (compare_pnums): Likewise. (clear_threads_listing_context): Likewise. (remote_newthread_step): Likewise. (start_thread): Likewise. (end_thread): Likewise. (remove_child_of_pending_fork): Likewise. (remove_stop_reply_for_inferior): Likewise. (remove_stop_reply_of_remote_state): Likewise. (remote_notif_remove_once_on_match): Likewise. (stop_reply_match_ptid_and_ws): Likewise. (kill_child_of_pending_fork): Likewise. (register_remote_g_packet_guess): Likewise. (remote_read_description_p): Likewise. (remote_read_description): Likewise. (free_actions_list_cleanup_wrapper): Likewise. (remote_async_serial_handler): Likewise. * rl78-tdep.c (rl78_get_opcode_byte): Likewise. (rl78_analyze_frame_prologue): Likewise. * rs6000-tdep.c (ppc_supply_gregset): Likewise. (ppc_supply_fpregset): Likewise. (ppc_supply_vsxregset): Likewise. (ppc_supply_vrregset): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (e500_move_ev_register): Likewise. (do_regcache_raw_write): Likewise. (rs6000_frame_cache): Likewise. (rs6000_epilogue_frame_cache): Likewise. (rs6000_gdbarch_init): Likewise. * rx-tdep.c (rx_get_opcode_byte): Likewise. (rx_analyze_frame_prologue): Likewise. (rx_frame_type): Likewise. (rx_frame_sniffer_common): Likewise. * s390-linux-tdep.c (s390_check_for_saved): Likewise. (s390_frame_unwind_cache): Likewise. (s390_stub_frame_unwind_cache): Likewise. (s390_sigtramp_frame_unwind_cache): Likewise. * score-tdep.c (score_make_prologue_cache): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. (sentinel_frame_prev_arch): Likewise. * ser-base.c (fd_event): Likewise. (push_event): Likewise. (ser_base_write): Likewise. * ser-pipe.c (pipe_close): Likewise. * serial.c (serial_write): Likewise. * sh-tdep.c (sh_frame_cache): Likewise. (sh_stub_this_id): Likewise. * sh64-tdep.c (sh64_frame_cache): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (library_list_start_list): Likewise. (solib_aix_free_library_list): Likewise. * solib-darwin.c (get_darwin_info): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-spu.c (append_ocl_sos): Likewise. * solib-svr4.c (svr4_pspace_data_cleanup): Likewise. (get_svr4_info): Likewise. (library_list_start_library): Likewise. (svr4_library_list_start_list): Likewise. (hash_probe_and_action): Likewise. (equal_probe_and_action): Likewise. (svr4_update_solib_event_breakpoint): Likewise. (set_solib_svr4_fetch_link_map_offsets): Likewise. (svr4_fetch_link_map_offsets): Likewise. (svr4_have_link_map_offsets): Likewise. * solib-target.c (library_list_start_segment): Likewise. (library_list_start_section): Likewise. (library_list_start_library): Likewise. (library_list_end_library): Likewise. (library_list_start_list): Likewise. (solib_target_free_library_list): Likewise. * solib.c (solib_ops): Likewise. (set_solib_ops): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc-tdep.c (sparc_frame_cache): Likewise. (sparc32_frame_cache): Likewise. (sparc32_supply_gregset): Likewise. (sparc32_collect_gregset): Likewise. (sparc32_supply_fpregset): Likewise. (sparc32_collect_fpregset): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * sparc64-tdep.c (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise. * sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise. (sparc64obsd_trapframe_cache): Likewise. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise. * spu-tdep.c (spu_frame_unwind_cache): Likewise. (spu2ppu_prev_arch): Likewise. (spu2ppu_this_id): Likewise. (spu2ppu_prev_register): Likewise. (spu2ppu_dealloc_cache): Likewise. (spu_dis_asm_print_address): Likewise. (gdb_print_insn_spu): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (rs6000_builtin_type): Likewise. * stack.c (do_print_variable_and_value): Likewise. * stap-probe.c (get_stap_base_address_1): Likewise. * symfile-debug.c (debug_qf_has_symbols): Likewise. (debug_qf_find_last_source_symtab): Likewise. (debug_qf_forget_cached_source_info): Likewise. (debug_qf_map_symtabs_matching_filename): Likewise. (debug_qf_lookup_symbol): Likewise. (debug_qf_print_stats): Likewise. (debug_qf_dump): Likewise. (debug_qf_relocate): Likewise. (debug_qf_expand_symtabs_for_function): Likewise. (debug_qf_expand_all_symtabs): Likewise. (debug_qf_expand_symtabs_with_fullname): Likewise. (debug_qf_map_matching_symbols): Likewise. (debug_qf_expand_symtabs_matching): Likewise. (debug_qf_find_pc_sect_compunit_symtab): Likewise. (debug_qf_map_symbol_filenames): Likewise. (debug_sym_get_probes): Likewise. (debug_sym_new_init): Likewise. (debug_sym_init): Likewise. (debug_sym_read): Likewise. (debug_sym_read_psymbols): Likewise. (debug_sym_finish): Likewise. (debug_sym_offsets): Likewise. (debug_sym_read_linetable): Likewise. (debug_sym_relocate): Likewise. (uninstall_symfile_debug_logging): Likewise. * symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise. * symfile.c (place_section): Likewise. (add_section_size_callback): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (clear_memory_write_data): Likewise. (allocate_symtab): Likewise. * symmisc.c (maintenance_expand_file_matcher): Likewise. * symtab.c (lookup_symtab_callback): Likewise. (hash_demangled_name_entry): Likewise. (eq_demangled_name_entry): Likewise. (get_symbol_cache): Likewise. (symbol_cache_cleanup): Likewise. (set_symbol_cache_size): Likewise. (symbol_cache_flush): Likewise. (maintenance_print_symbol_cache): Likewise. (maintenance_print_symbol_cache_statistics): Likewise. (delete_filename_seen_cache): Likewise. (output_partial_symbol_filename): Likewise. (search_symbols_file_matches): Likewise. (search_symbols_name_matches): Likewise. (do_free_completion_list): Likewise. (maybe_add_partial_symtab_filename): Likewise. (get_main_info): Likewise. (main_info_cleanup): Likewise. * target-dcache.c (target_dcache_cleanup): Likewise. (target_dcache_init_p): Likewise. (target_dcache_invalidate): Likewise. (target_dcache_get): Likewise. (target_dcache_get_or_init): Likewise. * target-descriptions.c (target_find_description): Likewise. (tdesc_find_type): Likewise. (tdesc_data_cleanup): Likewise. (tdesc_find_arch_register): Likewise. (tdesc_register_name): Likewise. (tdesc_register_type): Likewise. (tdesc_register_reggroup_p): Likewise. (set_tdesc_pseudo_register_name): Likewise. (set_tdesc_pseudo_register_type): Likewise. (set_tdesc_pseudo_register_reggroup_p): Likewise. (tdesc_use_registers): Likewise. (free_target_description): Likewise. * target-memory.c (compare_block_starting_address): Likewise. (cleanup_request_data): Likewise. (cleanup_write_requests_vector): Likewise. * target.c (open_target): Likewise. (cleanup_restore_target_terminal): Likewise. (free_memory_read_result_vector): Likewise. * thread.c (disable_thread_stack_temporaries): Likewise. (finish_thread_state_cleanup): Likewise. (do_restore_current_thread_cleanup): Likewise. (restore_current_thread_cleanup_dtor): Likewise. (set_thread_refcount): Likewise. (tp_array_compar): Likewise. (do_captured_thread_select): Likewise. * tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise. (tic6x_stub_this_id): Likewise. * tilegx-tdep.c (tilegx_frame_cache): Likewise. * top.c (do_restore_instream_cleanup): Likewise. (gdb_readline_wrapper_cleanup): Likewise. (kill_or_detach): Likewise. (print_inferior_quit_action): Likewise. * tracefile-tfile.c (match_blocktype): Likewise. (build_traceframe_info): Likewise. * tracefile.c (trace_file_writer_xfree): Likewise. * tracepoint.c (memrange_cmp): Likewise. (do_collect_symbol): Likewise. (do_clear_collection_list): Likewise. (do_restore_current_traceframe_cleanup): Likewise. (restore_current_traceframe_cleanup_dtor): Likewise. (free_current_marker): Likewise. (traceframe_info_start_memory): Likewise. (traceframe_info_start_tvar): Likewise. (free_result): Likewise. * tramp-frame.c (tramp_frame_cache): Likewise. * tui/tui-file.c (tui_file_delete): Likewise. (tui_fileopen): Likewise. (tui_sfileopen): Likewise. (tui_file_isatty): Likewise. (tui_file_rewind): Likewise. (tui_file_put): Likewise. (tui_file_fputs): Likewise. (tui_file_get_strbuf): Likewise. (tui_file_adjust_strbuf): Likewise. (tui_file_flush): Likewise. * tui/tui-layout.c (make_command_window): Likewise. (make_data_window): Likewise. (show_source_disasm_command): Likewise. (show_data): Likewise. (make_source_or_disasm_window): Likewise. (show_source_or_disasm_and_command): Likewise. * tui/tui-out.c (tui_field_int): Likewise. (tui_field_string): Likewise. (tui_field_fmt): Likewise. (tui_text): Likewise. * typeprint.c (hash_typedef_field): Likewise. (eq_typedef_field): Likewise. (do_free_typedef_hash): Likewise. (copy_typedef_hash_element): Likewise. (do_free_global_table): Likewise. (find_global_typedef): Likewise. (find_typedef_in_hash): Likewise. * ui-file.c (ui_file_write_for_put): Likewise. (do_ui_file_xstrdup): Likewise. (mem_file_delete): Likewise. (mem_file_rewind): Likewise. (mem_file_put): Likewise. (mem_file_write): Likewise. (stdio_file_delete): Likewise. (stdio_file_flush): Likewise. (stdio_file_read): Likewise. (stdio_file_write): Likewise. (stdio_file_write_async_safe): Likewise. (stdio_file_fputs): Likewise. (stdio_file_isatty): Likewise. (stdio_file_fseek): Likewise. (tee_file_delete): Likewise. (tee_file_flush): Likewise. (tee_file_write): Likewise. (tee_file_fputs): Likewise. (tee_file_isatty): Likewise. * ui-out.c (do_cleanup_table_end): Likewise. (do_cleanup_end): Likewise. * user-regs.c (user_reg_add): Likewise. (user_reg_map_name_to_regnum): Likewise. (usernum_to_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * utils.c (do_bfd_close_cleanup): Likewise. (do_fclose_cleanup): Likewise. (do_obstack_free): Likewise. (do_ui_file_delete): Likewise. (do_ui_out_redirect_pop): Likewise. (do_free_section_addr_info): Likewise. (restore_integer): Likewise. (do_unpush_target): Likewise. (do_htab_delete_cleanup): Likewise. (do_restore_ui_file): Likewise. (do_value_free): Likewise. (do_free_so): Likewise. (free_current_contents): Likewise. (do_regfree_cleanup): Likewise. (core_addr_hash): Likewise. (core_addr_eq): Likewise. (do_free_char_ptr_vec): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * varobj.c (do_free_variable_cleanup): Likewise. * vax-tdep.c (vax_supply_gregset): Likewise. (vax_frame_cache): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_values_cleanup): Likewise. (gdb_xml_start_element): Likewise. (gdb_xml_start_element_wrapper): Likewise. (gdb_xml_end_element): Likewise. (gdb_xml_end_element_wrapper): Likewise. (gdb_xml_cleanup): Likewise. (gdb_xml_fetch_external_entity): Likewise. (gdb_xml_parse_attr_enum): Likewise. (xinclude_start_include): Likewise. (xinclude_end_include): Likewise. (xml_xinclude_default): Likewise. (xml_xinclude_start_doctype): Likewise. (xml_xinclude_end_doctype): Likewise. (xml_xinclude_cleanup): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (free_syscalls_info): Likewise. (syscall_start_syscall): Likewise. * xml-tdesc.c (tdesc_end_arch): Likewise. (tdesc_end_osabi): Likewise. (tdesc_end_compatible): Likewise. (tdesc_start_target): Likewise. (tdesc_start_feature): Likewise. (tdesc_start_reg): Likewise. (tdesc_start_union): Likewise. (tdesc_start_struct): Likewise. (tdesc_start_flags): Likewise. (tdesc_start_field): Likewise. (tdesc_start_vector): Likewise. (fetch_available_features_from_target): Likewise. * xstormy16-tdep.c (xstormy16_frame_cache): Likewise. * xtensa-tdep.c (xtensa_supply_gregset): Likewise. (xtensa_frame_cache): Likewise. (xtensa_frame_prev_register): Likewise. (xtensa_extract_return_value): Likewise. |
||
|
Markus Metzger
|
d2939ba2b4 |
btrace: honour scheduler-locking for all-stop targets
In all-stop mode, record btrace maintains the old behaviour of an implicit scheduler-locking on. Now that we added a scheduler-locking mode to model this old behaviour, we don't need the respective code in record btrace anymore. Remove it. For all-stop targets, step inferior_ptid and continue other threads matching the argument ptid. Assert that inferior_ptid matches the argument ptid. This should make record btrace honour scheduler-locking. gdb/ * record-btrace.c (record_btrace_resume): Honour scheduler-locking. testsuite/ * gdb.btrace/multi-thread-step.exp: Test scheduler-locking on, step, and replay. |
||
|
Markus Metzger
|
f2665db5f2 |
infrun: scheduler-locking replay
Record targets behave as if scheduler-locking were on in replay mode. Add a new scheduler-locking option "replay" to make this implicit behaviour explicit. It behaves like "on" in replay mode and like "off" in record mode. By making the current behaviour a scheduler-locking option, we allow the user to change it. Since it is the current behaviour, this new option is also the new default. One caveat is that when resuming a thread that is at the end of its execution history, record btrace implicitly stops replaying other threads and resumes the entire process. This is a convenience feature to not require the user to explicitly move all other threads to the end of their execution histories before being able to resume the process. We mimick this behaviour with scheduler-locking replay and move it from record-btrace into infrun. With all-stop on top of non-stop, we can't do this in record-btrace anymore. Record full does not really support multi-threading and is therefore not impacted. If it were extended to support multi-threading, it would 'benefit' from this change. The good thing is that all record targets will behave the same with respect to scheduler-locking. I put the code for this into clear_proceed_status. It also sends the about_to_proceed notification. gdb/ * NEWS: Announce new scheduler-locking mode. * infrun.c (schedlock_replay): New. (scheduler_enums): Add schedlock_replay. (scheduler_mode): Change default to schedlock_replay. (user_visible_resume_ptid): Handle schedlock_replay. (clear_proceed_status_thread): Stop replaying if resumed thread is not replaying. (schedlock_applies): Handle schedlock_replay. (_initialize_infrun): Document new scheduler-locking mode. * record-btrace.c (record_btrace_resume): Remove code to stop other threads when not replaying the resumed thread. doc/ * gdb.texinfo (All-Stop Mode): Describe new scheduler-locking mode. |
||
|
Markus Metzger
|
7ff27e9bab |
target: add to_record_will_replay target method
Add a new target method to_record_will_replay to query if there is a record target that will replay at least one thread matching the argument PTID if it were executed in the argument execution direction. gdb/ * record-btrace.c ((record_btrace_will_replay): New. (init_record_btrace_ops): Initialize to_record_will_replay. * record-full.c ((record_full_will_replay): New. (init_record_full_ops): Initialize to_record_will_replay. * target-delegates.c: Regenerated. * target.c (target_record_will_replay): New. * target.h (struct target_ops) <to_record_will_replay>: New. (target_record_will_replay): New. Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> |
||
|
Markus Metzger
|
797094dddf |
target: add to_record_stop_replaying target method
Add a new target method to_record_stop_replaying to stop replaying. gdb/ * record-btrace.c (record_btrace_resume): Call target_record_stop_replaying. (record_btrace_stop_replaying_all): New. (init_record_btrace_ops): Initialize to_record_stop_replaying. * record-full.c (record_full_stop_replaying): New. (init_record_full_ops ): Initialize to_record_stop_replaying. * target-delegates.c: Regenerated. * target.c (target_record_stop_replaying): New. * target.h (struct target_ops) <to_record_stop_replaying>: New. (target_record_stop_replaying): New. |
||
|
Markus Metzger
|
4d10e986f4 |
btrace: allow full memory and register access for non-replaying threads
The record btrace target does not allow accessing memory and storing registers while replaying. For multi-threaded applications, this prevents those accesses also for threads that are at the end of their execution history as long as at least one thread is replaying. Change this to only check if the selected thread is replaying. This allows threads that are at the end of their execution history to read and write memory and to store registers. Also change the error message to reflect this change. gdb/ * record-btrace.c (record_btrace_xfer_partial) (record_btrace_store_registers, record_btrace_prepare_to_store): Call record_btrace_is_replaying with inferior_ptid instead of minus_one_ptid. (record_btrace_store_registers): Change error message. |
||
|
Markus Metzger
|
a52eab4808 |
target, record: add PTID argument to to_record_is_replaying
The to_record_is_replaying target method is used to query record targets if they are replaying. This is currently interpreted as "is any thread being replayed". Add a PTID argument and change the interpretation to "is any thread matching PTID being replayed". Change all users to pass minus_one_ptid to preserve the old meaning. The record full target does not really support multi-threading and ignores the PTID argument. gdb/ * record-btrace.c (record_btrace_is_replaying): Add ptid argument. Update users to pass minus_one_ptid. * record-full.c (record_full_is_replaying): Add ptid argument (ignored). * record.c (cmd_record_delete): Pass inferior_ptid to target_record_is_replaying. * target-delegates.c: Regenerated. * target.c (target_record_is_replaying): Add ptid argument. * target.h (struct target_ops) <to_record_is_replaying>: Add ptid argument. (target_record_is_replaying): Add ptid argument. |
||
|
Markus Metzger
|
cbb55fa7a1 |
btrace: non-stop
Support non-stop mode in record btrace. gdb/ * record-btrace.c (record_btrace_open): Remove non_stop check. * NEWS: Announce that record btrace supports non-stop mode. testsuite/ * gdb.btrace/non-stop.c: New. * gdb.btrace/non-stop.exp: New. |
||
|
Markus Metzger
|
a6b5be76f9 |
btrace: async
The record btrace target runs synchronous with GDB. That is, GDB steps resumed threads in record btrace's to_wait method. Without GDB calling to_wait, nothing happens 'on the target'. Check for further expected events in to_wait before reporting the current event and mark record btrace's async event handler in async mode. gdb/ * record-btrace.c (record_btrace_maybe_mark_async_event): New. (record_btrace_wait): Call record_btrace_maybe_mark_async_event. |
||
|
Markus Metzger
|
ec71cc2fc6 |
btrace: temporarily set inferior_ptid in record_btrace_start_replaying
Get_current_frame uses inferior_ptid. In record_btrace_start_replaying, we need to get the current frame of the argument thread. So far, this has always been inferior_ptid. With non-stop, this is not guaranteed. Temporarily set inferior_ptid to the ptid of the argument thread. We already temporarily set the argument thread's executing flag to false. Move both into a new function get_thread_current_frame that does the temporary adjustments, calls get_current_frame, and restores the previous values. gdb/ * record-btrace.c (get_thread_current_frame): New. (record_btrace_start_replaying): Call get_thread_current_frame. |
||
|
Markus Metzger
|
0ca912dfef |
btrace: resume all requested threads
The record targets are implicitly schedlocked. They only step the current thread and keep other threads where they are. Change record btrace to step all requested threads in to_resume. For maintenance and debugging, we keep the old behaviour when the target below is not non-stop. Enable with "maint set target-non-stop on". gdb/ * record-btrace.c (record_btrace_resume_thread): A move request overwrites a previous move request. (record_btrace_find_resume_thread): Removed. (record_btrace_resume): Resume all requested threads. |
||
|
Markus Metzger
|
e3cfc1c76d |
btrace: lock-step
Record btrace's to_wait method picks a single thread to step. When passed minus_one_ptid, it picks the current thread. All other threads remain where they are. Change this to step all resumed threads together, one step at a time, until the first thread reports an event. We do delay reporting NO_HISTORY events until there are no other events to report to prevent threads at the end of their execution history from starving other threads. We keep threads at the end of their execution history moving and replaying until we announce their stop in to_wait. This shouldn't really be user-visible but its a detail worth mentioning. Since record btrace's to_resume method also picks only a single thread to resume, there shouldn't be a difference with the current all-stop. With non-stop or all-stop on top of non-stop, we will see differences. The behaviour should be more natural as we're moving all threads. gdb/ * record-btrace.c: Include vec.h. (record_btrace_find_thread_to_move): Removed. (btrace_step_no_resumed, btrace_step_again) (record_btrace_stop_replaying_at_end): New. (record_btrace_cancel_resume): Call record_btrace_stop_replaying_at_end. (record_btrace_single_step_forward): Remove calls to record_btrace_stop_replaying. (record_btrace_step_thread): Do only one step for BTHR_CONT and BTHR_RCONT. Keep threads at the end of their history moving. (record_btrace_wait): Call record_btrace_step_thread for all threads until one reports an event. Call record_btrace_stop_replaying_at_end for the eventing thread. |
||
|
Markus Metzger
|
cf8f8f0c42 |
btrace: add missing NO_HISTORY
If a single-step ended right at the end of the execution history, we forgot to announce that. Fix it. gdb/ * record-btrace.c (record_btrace_single_step_forward): Return NO_HISTORY if a step brings us to the end of the execution history. |
||
|
Markus Metzger
|
011c71b6cb |
btrace: move breakpoint checking into stepping functions
Breakpoints are only checked for BTHR_CONT and BTHR_RCONT stepping requests.
A BTHR_STEP and BTHR_RSTEP request will always report stopped without reason.
Since breakpoints are reported correctly, I assume infrun is handling this.
Move the breakpoint check into the btrace single stepping functions. This
will cause us to report breakpoint hits now also for single-step requests.
One thing to notice is that
- when executing forwards, the breakpoint is checked before 'executing'
the instruction, i.e. before moving the PC to the next instruction.
- when executing backwards, the breakpoint is checked after 'executing'
the instruction, i.e. after moving the PC to the preceding instruction
in the recorded execution.
There is code in infrun (see, for example proceed and adjust_pc_after_break)
that handles this and also depends on this behaviour.
gdb/
* record-btrace.c (record_btrace_step_thread): Move breakpoint check
to ...
(record_btrace_single_step_forward): ... here and
(record_btrace_single_step_backward): ... here.
|
||
|
Markus Metzger
|
d825d24810 |
btrace: split record_btrace_step_thread
The code for BTHR_STEP and BTHR_CONT is fairly similar. Extract the common parts into a new function record_btrace_single_step_forward. The function returns TARGET_WAITKIND_SPURIOUS to indicate that the single-step completed without triggering a trap. Same for BTHR_RSTEP and BTHR_RCONT. gdb/ * record-btrace.c (btrace_step_spurious) (record_btrace_single_step_forward) (record_btrace_single_step_backward): New. (record_btrace_step_thread): Call record_btrace_single_step_forward and record_btrace_single_step_backward. |
||
|
Markus Metzger
|
3c615f99d3 |
btrace: extract the breakpoint check from record_btrace_step_thread
There are two places where record_btrace_step_thread checks for a breakpoint at the current replay position. Move this code into its own function. gdb/ * record-btrace.c (record_btrace_replay_at_breakpoint): New. (record_btrace_step_thread): Call record_btrace_replay_at_breakpoint. |
||
|
Markus Metzger
|
987e68b1a3 |
btrace: improve stepping debugging
gdb/ * record-btrace.c (btrace_thread_flag_to_str) (record_btrace_cancel_resume): New. (record_btrace_step_thread): Call btrace_thread_flag_to_str. (record_btrace_resume): Print execution direction. (record_btrace_resume_thread): Call btrace_thread_flag_to_str. (record_btrace_wait): Call record_btrace_cancel_resume. |
||
|
Markus Metzger
|
6e4879f0eb |
btrace: support to_stop
Add support for the to_stop target method to the btrace record target. gdb/ * btrace.h (enum btrace_thread_flag) <BTHR_STOP>: New. * record-btrace (record_btrace_resume_thread): Clear BTHR_STOP. (record_btrace_find_thread_to_move): Also accept threads that have BTHR_STOP set. (btrace_step_stopped_on_request, record_btrace_stop): New. (record_btrace_step_thread): Support BTHR_STOP. (record_btrace_wait): Also clear BTHR_STOP when stopping other threads. (init_record_btrace_ops): Initialize to_stop. |
||
|
Markus Metzger
|
5953356cc4 |
btrace: fix non-stop check in to_wait
The record btrace target stops other threads in non-stop mode after stepping the to-be-resumed thread. The check is done on the non_stop variable. It should rather be done on target_is_non_stop_p (). With all-stop on top of non-stop, infrun will take care of stopping other threads. gdb/ * record-btrace.c (record_btrace_wait): Replace non_stop check with target_is_non_stop_p (). |
||
|
Simon Marchi
|
8d7493201c |
Replace some xmalloc-family functions with XNEW-family ones
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise. |
||
|
Markus Metzger
|
da8c46d296 |
btrace: indicate speculative execution
Indicate speculatively executed instructions with a leading '?'. We use the space that is normally used for the PC prefix. In the case where the instruction at the current PC had been executed speculatively before, the PC prefix will be partially overwritten resulting in "?> ". As a side-effect, the /p modifier to omit the PC prefix in the "record instruction-history" command now uses a 3-space PC prefix " " in order to have enough space for the speculative execution indication. gdb/ * btrace.c (btrace_compute_ftrace_bts): Clear insn flags. (pt_btrace_insn_flags): New. (ftrace_add_pt): Call pt_btrace_insn_flags. * btrace.h (btrace_insn_flag): New. (btrace_insn) <flags>: New. * record-btrace.c (btrace_insn_history): Print insn prefix. * NEWS: Announce it. doc/ * gdb.texinfo (Process Record and Replay): Document prefixing of speculatively executed instructions in the "record instruction-history" command. testsuite/ * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/tsx.exp: New. * gdb.btrace/tsx.c: New. * lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New. |
||
|
Markus Metzger
|
485668e5b3 |
record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
|
||
|
Markus Metzger
|
b20a652466 |
btrace: support Intel(R) Processor Trace
Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD. |
||
|
Pedro Alves
|
6a3753b34b |
Simplify target_async hook interface
All callers of target_async pass it the same callback (inferior_event_handler). Since both common code and target backends need to be able to put the target in and out of target async mode at any given time, there's really no way that a different callback could be passed. This commit simplifies things, and removes the indirection altogether. Bonus: with this, gdb's target_async method ends up with the same signature as gdbserver's. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-25 Pedro Alves <palves@redhat.com> * target.h <to_async>: Replace 'callback' and 'context' parameters with boolean 'enable' parameter. (target_async): Replace CALLBACK and CONTEXT parameters with boolean ENABLE parameter. * inf-loop.c (inferior_event_handler): Adjust. * linux-nat.c (linux_nat_attach, linux_nat_resume) (linux_nat_resume): Adjust. (async_client_callback, async_client_context): Delete. (handle_target_event): Call inferior_event_handler directly. (linux_nat_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. Remove references to async_client_callback and async_client_context. (linux_nat_close): Adjust. * record-btrace.c (record_btrace_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. (record_btrace_resume): Adjust. * record-full.c (record_full_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. (record_full_resume, record_full_core_resume): Adjust. * remote.c (struct remote_state) <async_client_callback, async_client_context>: Delete fields. (remote_start_remote, extended_remote_attach_1, remote_resume) (extended_remote_create_inferior): Adjust. (remote_async_serial_handler): Call inferior_event_handler directly. (remote_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust. * target-delegates.c: Regenerate. |
||
|
Pedro Alves
|
6c63c96a22 |
more making TRY/CATCH callers look more like real C++ try/catch blocks
All these were caught by actually making TRY/CATCH use try/catch behind the scenes, which then resulted in the build failing (on x86_64 Fedora 20) because there was code between the try and catch blocks. gdb/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> * breakpoint.c (save_breakpoints): Adjust to avoid code between TRY and CATCH. * gdbtypes.c (safe_parse_type): Remove empty line. (types_deeply_equal): * guile/scm-frame.c (gdbscm_frame_name): * linux-thread-db.c (find_new_threads_once): * python/py-breakpoint.c (bppy_get_commands): * record-btrace.c (record_btrace_insert_breakpoint) (record_btrace_remove_breakpoint, record_btrace_start_replaying) (record_btrace_start_replaying): Adjust to avoid code between TRY and CATCH. |
||
|
Pedro Alves
|
492d29ea1c |
Split TRY_CATCH into TRY + CATCH
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
||
|
Pedro Alves
|
9e8915c6ce |
record-full/record-btrace: software/hardware breakpoint trap
This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration. |
||
|
Markus Metzger
|
ce0dfbeaad |
btrace: compute line range when printing
The "record function-call-history" command prints the range of source lines for a function segment when given the /l modifier. This information is computed for the entire execution history when processing the recorded branch trace. To speed up the initial trace processing, we compute the information when we print a function segment and only if requested. The computation is fast enough (due to the limited scope) that it is not worth storing the data in struct btrace_function, anymore. gdb/ * btrace.h (btrace_function) <lbegin, lend>: Remove. * btrace.c (ftrace_debug): Do not print the line range. (ftrace_skip_file, ftrace_update_lines): Remove. (ftrace_new_function): Remove lbegin and lend initialization. (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines. * record-btrace.c (btrace_compute_src_line_range): New. (btrace_call_history_src_line): Call btrace_compute_src_line_range. |
||
|
Pedro Alves
|
928dbe0756 |
record-btrace.c: Remove redefinitions
The set_record_btrace_cmdlist and show_record_btrace_cmdlist objects are declared twice in the file, seemingly a simply copy/paste oversight. In C, the first time counts as forward declaration, but in C++, they are all definitions. That results in: src/gdb/record-btrace.c:80:33: error: redefinition of ‘cmd_list_element* set_record_btrace_cmdlist’ src/gdb/record-btrace.c:61:33: error: ‘cmd_list_element* set_record_btrace_cmdlist’ previously declared here src/gdb/record-btrace.c:81:33: error: redefinition of ‘cmd_list_element* show_record_btrace_cmdlist’ src/gdb/record-btrace.c:62:33: error: ‘cmd_list_element* show_record_btrace_cmdlist’ previously declared here gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * record-btrace.c (set_record_btrace_cmdlist) (show_record_btrace_cmdlist): Remove redefinitions. --- gdb/record-btrace.c | 4 ---- 1 file changed, 4 deletions(-) |
||
|
Markus Metzger
|
31fd9caad9 |
record-btrace: indicate gaps
Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output. |
||
|
Markus Metzger
|
d33501a51f |
record-btrace: add bts buffer size configuration option
Allow the size of the branch trace ring buffer to be defined by the user. The specified buffer size will be used when BTS tracing is enabled for new threads. The obtained buffer size may differ from the requested size. The actual buffer size for the current thread is shown in the "info record" command. Bigger buffers mean longer traces, but also longer processing time. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (parse_xml_btrace_conf_bts): Add size. (btrace_conf_bts_attributes): New. (btrace_conf_children): Add attributes. * common/btrace-common.h (btrace_config_bts): New. (btrace_config)<bts>: New. (btrace_config): Update comment. * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts): Use config. * features/btrace-conf.dtd: Increment version. Add size attribute to bts element. * record-btrace.c (set_record_btrace_bts_cmdlist, show_record_btrace_bts_cmdlist): New. (record_btrace_adjust_size, record_btrace_print_bts_conf, record_btrace_print_conf, cmd_set_record_btrace_bts, cmd_show_record_btrace_bts): New. (record_btrace_info): Call record_btrace_print_conf. (_initialize_record_btrace): Add commands. * remote.c: Add PACKET_Qbtrace_conf_bts_size enum. (remote_protocol_features): Add Qbtrace-conf:bts:size packet. (btrace_sync_conf): Synchronize bts size. (_initialize_remote): Add Qbtrace-conf:bts:size packet. * NEWS: Announce new commands and new packets. doc/ * gdb.texinfo (Branch Trace Configuration Format): Add size. (Process Record and Replay): Describe new set|show commands. (General Query Packets): Describe Qbtrace-conf:bts:size packet. testsuite/ * gdb.btrace/buffer-size: New. gdbserver/ * linux-low.c (linux_low_btrace_conf): Print size. * server.c (handle_btrace_conf_general_set): New. (hanle_general_set): Call handle_btrace_conf_general_set. (handle_query): Report Qbtrace-conf:bts:size as supported. |
||
|
Markus Metzger
|
f4abbc1682 |
record btrace: add configuration struct
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
|
||
|
Markus Metzger
|
043c357797 |
btrace: add format argument to supports_btrace
Add a format argument to the various supports_btrace functions to check for support of a specific btrace format. This is to prepare for a new format. Removed two redundant calls. The check will be made in the subsequent btrace_enable call. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS. * record-btrace.c (record_btrace_open): Remove call to target_supports_btrace. * remote.c (remote_supports_btrace): Update parameters. * target.c (target_supports_btrace): Update parameters. * target.h (to_supports_btrace, target_supports_btrace): Update parameters. * target-delegates.c: Regenerate. * target-debug.h (target_debug_print_enum_btrace_format): New. * nat/linux-btrace.c (kernel_supports_btrace): Rename into ... (kernel_supports_bts): ... this. Update users. Update warning text. (intel_supports_btrace): Rename into ... (intel_supports_bts): ... this. Update users. (cpu_supports_btrace): Rename into ... (cpu_supports_bts): ... this. Update users. (linux_supports_btrace): Update parameters. Split into this and ... (linux_supports_bts): ... this. * nat/linux-btrace.h (linux_supports_btrace): Update parameters. gdbserver/ * server.c (handle_btrace_general_set): Remove call to target_supports_btrace. (supported_btrace_packets): New. (handle_query): Call supported_btrace_packets. * target.h: include btrace-common.h. (btrace_target_info): Removed. (supports_btrace, target_supports_btrace): Update parameters. |
||
|
Pedro Alves
|
b7d2e91626 |
When disabling target async, remove all target event sources from the event loop
The sigall-reverse.exp test occasionally fails with something like this:
(gdb) PASS: gdb.reverse/sigall-reverse.exp: send signal TERM
continue
Continuing.
The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) FAIL: gdb.reverse/sigall-reverse.exp: continue to signal exit (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to handler of TERM (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to gen_TERM (timeout)
This is another event-loop/async related problem exposed by the patch
that made 'query' use gdb_readline_wrapper (
|
||
|
Joel Brobecker
|
32d0add0a6 |
Update year range in copyright notice of all files owned by the GDB project.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
||
Doug Evans
|
08be3fe322 |
Replace some symbol accessor macros with functions.
gdb/ChangeLog: * symtab.h (SYMBOL_SYMTAB): Delete (SYMBOL_OBJFILE): Delete. (symbol_symtab, symbol_set_symtab): Declare. (symbol_objfile, symbol_arch): Declare. * symtab.c (symbol_symtab): Replaces SYMBOL_SYMTAB. All uses updated. All references to symbol->symtab redirected through here. (symbol_set_symtab): New function. All assignments to SYMBOL_SYMTAB redirected through here. (symbol_arch): New function. (symbol_objfile): New function. Replaces SYMBOL_OBJFILE. All uses updated. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call symbol_arch. * findvar.c (default_read_var_value): Call symbol_arch. * guile/scm-frame.c (gdbscm_frame_block): Call symbol_objfile. * jv-lang.c (add_class_symtab_symbol): Call symbol_arch. * printcmd.c (address_info): Call symbol_arch. * tracepoint.c (scope_info): Call symbol_arch. |
||
|
Simon Marchi
|
c9657e708a |
Introduce utility function find_inferior_ptid
This patch introduces find_inferior_ptid to replace the common idiom find_inferior_pid (ptid_get_pid (...)); It replaces all the instances of that idiom that I found with the new function. No significant changes before/after the patch in the regression suite on amd64 linux. gdb/ChangeLog: * inferior.c (find_inferior_ptid): New function. * inferior.h (find_inferior_ptid): New declaration. * ada-tasks.c (ada_get_task_number): Use find_inferior_ptid. * corelow.c (core_pid_to_str): Same. * darwin-nat.c (darwin_resume): Same. * infrun.c (fetch_inferior_event): Same. (get_inferior_stop_soon): Same. (handle_inferior_event): Same. (handle_signal_stop): Same. * linux-nat.c (resume_lwp): Same. (stop_wait_callback): Same. * mi/mi-interp.c (mi_new_thread): Same. (mi_thread_exit): Same. * proc-service.c (ps_pglobal_lookup): Same. * record-btrace.c (record_btrace_step_thread): Same. * remote-sim.c (gdbsim_close_inferior): Same. (gdbsim_resume): Same. (gdbsim_stop): Same. * sol2-tdep.c (sol2_core_pid_to_str): Same. * target.c (memory_xfer_partial_1): Same. (default_thread_address_space): Same. * thread.c (thread_change_ptid): Same. (switch_to_thread): Same. (do_restore_current_thread_cleanup): Same. |
||
|
Pedro Alves
|
e8032dde10 |
Push pruning old threads down to the target
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
|
||
Gary Benson
|
c765fdb902 |
Remove spurious exceptions.h inclusions
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB .c files include defs.h as their first line, so no file other than utils.h needs to include exceptions.h. This commit removes all such inclusions. gdb/ChangeLog: * ada-lang.c: Do not include exceptions.h. * ada-valprint.c: Likewise. * amd64-tdep.c: Likewise. * auto-load.c: Likewise. * block.c: Likewise. * break-catch-throw.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * c-lang.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-script.c: Likewise. * completer.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * darwin-nat.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * event-top.c: Likewise. * f-valprint.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * gdbtypes.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * guile/scm-auto-load.c: Likewise. * guile/scm-breakpoint.c: Likewise. * guile/scm-cmd.c: Likewise. * guile/scm-frame.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-param.c: Likewise. * guile/scm-symbol.c: Likewise. * guile/scm-type.c: Likewise. * hppa-hpux-tdep.c: Likewise. * i386-tdep.c: Likewise. * inf-loop.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * interps.h: Likewise. * jit.c: Likewise. * linespec.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32r-rom.c: Likewise. * main.c: Likewise. * memory-map.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * monitor.c: Likewise. * nto-procfs.c: Likewise. * objc-lang.c: Likewise. * p-valprint.c: Likewise. * parse.c: Likewise. * ppc-linux-tdep.c: Likewise. * printcmd.c: Likewise. * probe.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-breakpoint.c: Likewise. * python/py-cmd.c: Likewise. * python/py-finishbreakpoint.c: Likewise. * python/py-frame.c: Likewise. * python/py-framefilter.c: Likewise. * python/py-function.c: Likewise. * python/py-gdb-readline.c: Likewise. * python/py-inferior.c: Likewise. * python/py-infthread.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-linetable.c: Likewise. * python/py-param.c: Likewise. * python/py-prettyprint.c: Likewise. * python/py-symbol.c: Likewise. * python/py-type.c: Likewise. * python/py-value.c: Likewise. * python/python-internal.h: Likewise. * python/python.c: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * regcache.c: Likewise. * remote-fileio.c: Likewise. * remote-mips.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-nat.c: Likewise. * skip.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-ia64-hpux.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib.c: Likewise. * spu-tdep.c: Likewise. * stack.c: Likewise. * stap-probe.c: Likewise. * symfile-mem.c: Likewise. * symmisc.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-interp.c: Likewise. * typeprint.c: Likewise. * utils.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * windows-nat.c: Likewise. * xml-support.c: Likewise. |
||
Tom Tromey
|
014f9477f4 |
constify to_open
This makes target_ops::to_open take a const string and then fixes the fallout. There were a few of these I could not build. However I eyeballed it and in any case the fixes should generally be trivial. This is based on the patch to fix up the target debugging for to_open, because that changes gdb to not directly install to_open as the target command 2014-07-30 Tom Tromey <tromey@redhat.com> * bsd-kvm.c (bsd_kvm_open): Constify. * corelow.c (core_open): Constify. * ctf.c (ctf_open): Constify. * dbug-rom.c (dbug_open): Constify. * exec.c (exec_open): Constify. * m32r-rom.c (m32r_open, mon2000_open): Constify. * microblaze-rom.c (picobug_open): Constify. * nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open): Constify. * ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify. * record-btrace.c (record_btrace_open): Constify. * record-full.c (record_full_core_open_1, record_full_open_1) (record_full_open): Constify. * remote-m32r-sdi.c (m32r_open): Constify. * remote-mips.c (common_open, mips_open, pmon_open, ddb_open) (rockhopper_open, lsi_open): Constify. * remote-sim.c (gdbsim_open): Constify. * remote.c (remote_open, extended_remote_open, remote_open_1): Constify. * target.h (struct target_ops) <to_open>: Make "arg" const. * tracefile-tfile.c (tfile_open): Constify. |