a0dc02a6df
358 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Pedro Alves
|
f37f681c2b |
[IRIX] eliminate deprecated_insert_raw_breakpoint uses
The IRIX support wants to set a breakpoint to be hit when the startup
phase is complete, which is where shared libraries have been mapped
in. AFAIU, for most IRIX ports, that location is the entry point.
For MIPS IRIX however, GDB needs to set a breakpoint earlier, in
__dbx_link, as explained by:
#ifdef SYS_syssgi
/* On mips-irix, we need to stop the inferior early enough during
the startup phase in order to be able to load the shared library
symbols and insert the breakpoints that are located in these shared
libraries. Stopping at the program entry point is not good enough
because the -init code is executed before the execution reaches
that point.
So what we need to do is to insert a breakpoint in the runtime
loader (rld), more precisely in __dbx_link(). This procedure is
called by rld once all shared libraries have been mapped, but before
the -init code is executed. Unfortuantely, this is not straightforward,
as rld is not part of the executable we are running, and thus we need
the inferior to run until rld itself has been mapped in memory.
For this, we trace all syssgi() syscall exit events. Each time
we detect such an event, we iterate over each text memory maps,
get its associated fd, and scan the symbol table for __dbx_link().
When found, we know that rld has been mapped, and that we can insert
the breakpoint at the symbol address. Once the dbx_link() breakpoint
has been inserted, the syssgi() notifications are no longer necessary,
so they should be canceled. */
proc_trace_syscalls_1 (pi, SYS_syssgi, PR_SYSEXIT, FLAG_SET, 0);
#endif
The loop in irix_solib_create_inferior_hook then runs until whichever
breakpoint is hit first, the one set by solib-irix.c or the one set by
procfs.c.
Note the comment in disable_break talks about __dbx_init, but I think
that's a typo for __dbx_link:
- /* Note that it is possible that we have stopped at a location that
- is different from the location where we inserted our breakpoint.
- On mips-irix, we can actually land in __dbx_init(), so we should
- not check the PC against our breakpoint address here. See procfs.c
- for more details. */
This looks very much like referring to the loop in
irix_solib_create_inferior_hook stopping at __dbx_link instead of at
the entry point.
What this patch does is convert these deprecated raw breakpoints to
standard solib_event breakpoints. When the first solib-event
breakpoint is hit, we delete all solib-event breakpoints. We do that
in the so_ops->handle_event hook.
This allows getting rid of the loop in irix_solib_create_inferior_hook
completely, which should allow properly handling signals and other
events in the early startup phase, like in SVR4.
Built on x86_64 Fedora 20 with --enable-targets=all (builds
solib-irix.c).
Joel tested that with an earlier version of this patch "info shared"
after starting a program gave the same list of shared libraries as
before.
gdb/ChangeLog:
2014-09-12 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_solib_event_breakpoints_at_next_stop)
(create_and_insert_solib_event_breakpoint): New functions.
* breakpoint.h (create_and_insert_solib_event_breakpoint)
(remove_solib_event_breakpoints_at_next_stop): New declarations.
* procfs.c (dbx_link_bpt_addr, dbx_link_bpt): Delete globals.
(remove_dbx_link_breakpoint): Delete function.
(insert_dbx_link_bpt_in_file): Use
create_and_insert_solib_event_breakpoint instead of
deprecated_insert_raw_breakpoint.
(procfs_wait): Don't check whether we hit __dbx_link here.
(procfs_mourn_inferior): Don't delete the __dbx_link breakpoint
here.
* solib-irix.c (base_breakpoint): Delete global.
(disable_break): Delete function.
(enable_break): Use create_solib_event_breakpoint
instead of deprecated_insert_raw_breakpoint.
(irix_solib_handle_event): New function.
(irix_solib_create_inferior_hook): Don't run the target or disable
the mapping-complete breakpoint here.
(_initialize_irix_solib): Install irix_solib_handle_event as
so_ops->handle_event hook.
|
||
Gary Benson
|
bb974a2493 |
Move errno.h to common-defs.h
This commit moves the inclusion of errno.h to common-defs.h and removes all other inclusions. Note that prior to this commit server.h included errno.h protected by "#ifdef HAVE_ERRNO_H". This protection was added with the Windows CE port, which is currently broken. Since no other platform needs this, I have removed the protection and the configury to support it. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include errno.h. * defs.h: Do not include errno.h. * ada-typeprint.c: Likewise. * c-typeprint.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * event-loop.c: Likewise. * f-typeprint.c: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * m2-typeprint.c: Likewise. * nat/linux-btrace.c: Likewise. * p-typeprint.c: Likewise. * procfs.c: Likewise. * remote-sim.c: Likewise. * rs6000-nat.c: Likewise. * target.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * configure.ac (AC_CHECK_HEADERS): Remove errno.h. * configure: Regenerate. * config.in: Likewise. * server.h: Do not include errno.h. * event-loop.c: Likewise. * hostio-errno.c: Likewise. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * gdbreplay.c: Unconditionally include errno.h. |
||
|
Gary Benson
|
6d3d12ebef |
Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. |
||
|
Gary Benson
|
dccbb60975 |
Include gdb_assert.h in common-defs.h
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h. |
||
Tom Tromey
|
e75fdfcad1 |
clean up some target delegation cases
This patch cleans up some minor inconsistencies in target delegation. It's primary purpose is to avoid confusion in the code. A few spots were checking the "beneath" target; however this can only be NULL for the dummy target, so such tests are not needed. Some other spots were iterating over the beneath targets, looking for a method implementation. This is not needed for methods handled by make-target-delegates, as there is always an implementation. 2014-07-18 Tom Tromey <tromey@redhat.com> PR gdb/17130: * spu-multiarch.c (spu_region_ok_for_hw_watchpoint) (spu_fetch_registers, spu_store_registers, spu_xfer_partial) (spu_search_memory, spu_mourn_inferior): Simplify delegation. * linux-thread-db.c (thread_db_pid_to_str): Always delegate. * windows-nat.c (windows_xfer_partial): Always delegate. * record-btrace.c (record_btrace_xfer_partial): Simplify delegation. (record_btrace_fetch_registers, record_btrace_store_registers) (record_btrace_prepare_to_store, record_btrace_resume) (record_btrace_wait, record_btrace_find_new_threads) (record_btrace_thread_alive): Likewise. * procfs.c (procfs_xfer_partial): Always delegate. * corelow.c (core_xfer_partial): Always delegate. * sol-thread.c (sol_find_new_threads): Simplify delegation. |
||
Markus Metzger
|
1d1f1ccb33 |
make_corefile_notes: have caller free returned memory
The various make_corefile_notes implementations for gdbarch as well as target currently make an xfree cleanup on the data they return. This causes problems when trying to put a TRY_CATCH around the make_corefile_notes call. Specifically, we get a stale cleanup error in restore_my_cleanups. Omit the make_cleanup and have the caller free the memory. gdb/ * fbsd-nat.c (fbsd_make_corefile_notes): Remove make_cleanup call. * gcore.c (write_gcore_file): Free memory returned from make_corefile_notes. * linux-tdep.c (linux_make_corefile_notes): Remove make_cleanup call. * procfs.c (procfs_make_note_section): Remove make_cleanup call. |
||
|
Tom Tromey
|
7bc112c1b9 |
constify to_info_proc and friends
This makes a parameter of to_info_proc const and then fixes up some fallout, including parameters in a couple of gdbarch methods. I could not test the procfs.c change. I verified it by inspection. If this causes an error here, it will be trivial to fix. 2014-06-16 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_info_proc>: Make parameter const. (target_info_proc): Update. * target.c (target_info_proc): Make "args" const. * procfs.c (procfs_info_proc): Update. * linux-tdep.c (linux_info_proc): Update. (linux_core_info_proc_mappings): Make "args" const. (linux_core_info_proc): Update. * gdbarch.sh (info_proc, core_info_proc): Make "args" const. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * corelow.c (core_info_proc): Update. |
||
|
Tom Tromey
|
c0939df1ce |
constify to_attach
This constifies the "args" argument to the target_ops to_attach method. I updated all instances of the method. I could not compile all of them but I hand-inspected them. In all cases either the argument is ignored, or it is passed to parse_pid_to_attach. (linux-nat does some extra stuff, but that one I built...) If you want to try it on your host of choice, please do so. The code in parse_pid_to_attach seems a little bogus to me. If there is a platform with a broken strtoul, we have better methods for fixing the issue now. However, I left the code as is since it is clearly ok to do so. Built and regtested on x86-64 Fedora 20. 2014-06-04 Tom Tromey <tromey@redhat.com> * procfs.c (procfs_attach): Make "args" const. * windows-nat.c (windows_attach): Make "args" const. * nto-procfs.c (procfs_attach): Make "args" const. * inf-ttrace.c (inf_ttrace_attach): Make "args" const. * go32-nat.c (go32_attach): Make "args" const. * gnu-nat.c (gnu_attach): Make "args" const. * darwin-nat.c (darwin_attach): Make "args" const. * inf-ptrace.c (inf_ptrace_attach): Make "args" const. * linux-nat.c (linux_nat_attach): Make "args" const. * remote.c (extended_remote_attach_1, extended_remote_attach): Make "args" const. * target.h (struct target_ops) <to_attach>: Make "args" const. (find_default_attach): Likewise. * utils.c (parse_pid_to_attach): Make "args" const. * utils.h (parse_pid_to_attach): Update. |
||
|
Pedro Alves
|
45741a9c32 |
Add new infrun.h header.
Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h. |
||
|
Pedro Alves
|
6a3cb8e88a |
Allow making GDB not automatically connect to the native target.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
|
||
|
Pedro Alves
|
a69900ae4e |
Rename Solaris's target to "target child" like most other ports.
Note that "target procfs" is used by QNX, but the test must be failing there, as nto-procfs.c overrides to_open with a method that doesn't throw the error being tested. So I'm just removing the test completely. gdb/ 2014-03-13 Pedro Alves <palves@redhat.com> * procfs.c (procfs_target): Don't override to_shortname, to_longname or to_doc. gdb/testsuite/ 2014-03-13 Pedro Alves <palves@redhat.com> * gdb.base/default.exp: Don't test "target procfs". |
||
|
Pedro Alves
|
e96027e0d9 |
procfs.c: Don't install a deprecated_xfer_memory method
This removes yet another instance of a deprecated_xfer_memory user,
and fixes a nasty regression as a side-effect:
(gdb) start
Temporary breakpoint 1 at 0x19070: file simple_main.adb, line 4.
Starting program: /[...]/simple_main
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x19070
Cannot insert breakpoint -3.
Temporarily disabling shared library breakpoints:
breakpoint #-3
The regression was introduced by the to_xfer_partial transition
to return a status enum. procfs_xfer_partial was updated but
not the case where object is TARGET_OBJECT_MEMORY. As result,
procfs_xfer_partial was returning the length xfered rather than
the status, and the xfered buffer was left uninitialized.
gdb/
2014-02-19 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_target): Don't install procfs_xfer_memory as
deprecated_xfer_memory hook.
(procfs_xfer_partial): Call procfs_xfer_memory instead
of the deprecated_xfer_memory target hook.
(procfs_xfer_memory): Adjust interface as a to_xfer_partial
helper.
|
||
|
Tom Tromey
|
fc6691b259 |
Add target_ops argument to to_make_corefile_notes
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_make_corefile_notes>: Add argument. (target_make_corefile_notes): Add argument. * target.c (dummy_make_corefile_notes): Add 'self' argument. * procfs.c (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. * linux-nat.c (linux_nat_make_corefile_notes): Add 'self' argument. * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument. * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument. * exec.c (exec_make_note_section): Add 'self' argument. (exec_make_note_section): Add 'self' argument. |
||
|
Tom Tromey
|
2e73927ca5 |
Add target_ops argument to to_find_memory_regions
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_find_memory_regions>: Add argument. (target_find_memory_regions): Add argument. * target.c (dummy_find_memory_regions): Add 'self' argument. * procfs.c (proc_find_memory_regions): Add 'self' argument. * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument. * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument. * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument. * exec. (exec_do_find_memory_regions): New global. (exec_set_find_memory_regions): Rewrite. (exec_find_memory_regions): New function. (init_exec_ops): Use exec_find_memory_regions. |
||
|
Tom Tromey
|
1eab8a48bf |
Add target_ops argument to to_stop
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_stop): Add 'self' argument. * target.h (struct target_ops) <to_stop>: Add argument. * target.c (target_stop): Add argument. (debug_to_stop): Add argument. (update_current_target): Update. * remote.c (remote_stop): Add 'self' argument. * remote-sim.c (gdbsim_stop): Add 'self' argument. (gdbsim_cntrl_c): Update. * remote-m32r-sdi.c (m32r_stop): Add 'self' argument. * procfs.c (procfs_stop): Add 'self' argument. * nto-procfs.c (procfs_stop): Add 'self' argument. * monitor.c (monitor_stop): Add 'self' argument. (monitor_open): Update. * linux-nat.c (linux_nat_stop): Add argument. * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument. * gnu-nat.c (gnu_stop): Add 'self' argument. * darwin-nat.c (darwin_stop): Add 'self' argument. |
||
|
Tom Tromey
|
94bedb42a7 |
Add target_ops argument to to_pass_signals
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_pass_signals>: Add argument. * target.c (target_pass_signals): Add argument. * remote.c (remote_pass_signals): Add 'self' argument. (remote_start_remote): Update. * procfs.c (procfs_pass_signals): Add 'self' argument. * nto-procfs.c (procfs_pass_signals): Add 'self' argument. * linux-nat.c (linux_nat_pass_signals): Add 'self' argument. (linux_nat_create_inferior, linux_nat_attach): Update. |
||
|
Tom Tromey
|
31568a15a2 |
Add target_ops argument to to_region_ok_for_hw_watchpoint
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>: Add argument. (target_region_ok_for_hw_watchpoint): Add argument. * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument. (default_region_ok_for_hw_watchpoint): Add argument. * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument. * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self' argument. * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add 'self' argument. * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint): Add 'self' argument. |
||
|
Tom Tromey
|
7bb99c5383 |
Add target_ops argument to to_insert_watchpoint
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_insert_watchpoint>: Add argument. (target_insert_watchpoint): Add argument. * target.c (debug_to_insert_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument. * remote.c (remote_insert_watchpoint): Add 'self' argument. * remote-mips.c (mips_insert_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument. * procfs.c (procfs_insert_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument. (procfs_insert_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self' argument. * i386-nat.c (i386_insert_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add 'self' argument. |
||
|
Tom Tromey
|
11b5219af5 |
Add target_ops argument to to_remove_watchpoint
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_remove_watchpoint>: Add argument. (target_remove_watchpoint): Add argument. * target.c (debug_to_remove_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument. * remote.c (remote_remove_watchpoint): Add 'self' argument. * remote-mips.c (mips_remove_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument. * procfs.c (procfs_remove_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self' argument. * i386-nat.c (i386_remove_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add 'self' argument. |
||
|
Tom Tromey
|
5461485a87 |
Add target_ops argument to to_can_use_hw_breakpoint
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add argument. (target_can_use_hardware_watchpoint): Add argument. * target.c (debug_to_can_use_hw_breakpoint): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self' argument. * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self' argument. * remote.c (remote_check_watch_resources): Add 'self' argument. * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self' argument. * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add 'self' argument. |
||
|
Tom Tromey
|
6a109b6b2c |
add "this" pointers to more target APIs
A subsequent pass introduces delegation helper functions to the target API. This delegation is much cleaner if the target_ops pointer is directly available at delegation time. This patch adds the "this" pointer to various to_* methods for this purpose. This updates a number of ports which I am unable to test. Please give them a look-over. Any possible problem here is trivial, though, as all that is required is adding an argument to a function. 2014-02-19 Tom Tromey <tromey@redhat.com> * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint): Add 'ops' argument. * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add 'ops' argument. * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument. * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add 'ops' argument. * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops' argument. * linux-nat.c (save_sigtrap): Update. (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p) (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument. (linux_nat_close): Update. * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops' argument. * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops' argument. * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument. * record-full.c (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint) (tmp_to_async): Add 'ops' argument. (record_full_stopped_by_watchpoint, record_full_async) (record_full_can_async_p, record_full_is_async_p): Add 'ops' argument. * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint) (m32r_stopped_by_watchpoint): Add 'ops' argument. * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument. * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p) (remote_is_async_p, remote_async): Add 'ops' argument. (remote_stopped_data_address): Update. * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument. * target.c (update_current_target) (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Update. (debug_to_stopped_by_watchpoint): Add 'ops' argument. * target.h (struct target_ops) <to_stopped_by_watchpoint, to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument. (target_can_async_p, target_is_async_p, target_async) (target_stopped_by_watchpoint): Update. |
||
Yao Qi
|
9b409511d0 |
Return target_xfer_status in to_xfer_partial
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
|
||
|
Yao Qi
|
2ed4b5488f |
Replace -1 with TARGET_XFER_E_IO
Hi, This patch replaces -1 with TARGET_XFER_E_IO in the implementations of to_xfer_partial and their callees. This change is quite mechanical, and makes the next patch shorter. gdb: 2014-02-07 Yao Qi <yao@codesourcery.com> * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO. (ld_so_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (exec_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_proc_xfer_spu): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_qxfer): Likewise. (remote_write_qxfer, remote_read_qxfer): Likewise. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * target.c (memory_xfer_partial_1): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. |
||
Joel Brobecker
|
25790f6fc1 |
Remove assert in procfs.c::procfs_make_note_section (x86-solaris)
On x86-solaris, the gcore command sometimes triggers the following
internal error:
(gdb) gcore
/[...]/procfs.c:5523: internal-error: procfs_make_note_section: Assertion `thread_args.note_data != note_data' failed.
The problem is extremely elusive, for reasons that will become clearer
as I explain what is going on.
The program used to produce this issue was really simple:
| void break_me (void) { }
|
| int
| main (void)
| {
| break_me ();
| return 0;
| }
The procfs_make_note_section builds a buffer incrementally with
the contents of the core's notes section. The interesting bits are:
char *note_data = NULL;
[...]
note_data = (char *) elfcore_write_prpsinfo (obfd,
note_data,
note_size,
fname,
psargs);
This is the first call to bfd's elfcore which initializes note_data.
After that, we have a few more calls, which keep updating notes_data
and note_size, but our interest lies in the following part of
the function:
thread_args.note_data = note_data;
[...]
proc_iterate_over_threads (pi, procfs_corefile_thread_callback,
&thread_args);
/* There should be always at least one thread. */
gdb_assert (thread_args.note_data != note_data);
The comment implies that the assert is to verify that our loop
iterated over at least one thread. The check is relying on the
fact that the notes_data returned by the elfcore module changes
at each iteration, via (in procfs_corefile_thread_callback):
args->note_data = procfs_do_thread_registers (args->obfd, ptid,
args->note_data,
args->note_size,
args->stop_signal);
(which calls elfcore_write_lwpstatus).
But, while it happens most of the time, thanks to a call to realloc
in elfcore_write_note (the function that actually appends the data
at the end of the notes buffer),...
buf = (char *) realloc (buf, *bufsiz + newspace);
... this is by no means guarantied. In fact, under the right
circumstances, the buffer was grown twice without changing
addresses. Unfortunately, the circumstances are very sensitive,
thus making this bug very elusive.
This patch fixes the problem by simply removing the assert.
This means we're losing the assertion that there is at least one
thread, but I think that's OK. If we still want to keep the
assertion, we have the option of either checking the buffer
size, or else adding a boolean flag in the context structure
that we'd set to true as soon as we have a thread.
gdb/ChangeLog:
* procfs.c (procfs_make_note_section): Remove assertion and
associated comment.
|
||
|
Yao Qi
|
b55e14c72c |
Change to_xfer_partial 'len' type to ULONGEST.
This patch changes to_xfer_partial's len's type to ULONGEST, and adjust its implementations. gdb: 2014-01-14 Yao Qi <yao@codesourcery.com> * target.h (target_xfer_partial_ftype): Update. (struct target_ops) <to_xfer_partial>: Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise. |
||
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | ||
|
Yao Qi
|
4ac248ca0b |
Add target_xfer_partial_ftype
This patch adds a typedef target_xfer_partial_ftype. When we change the signature of xfer_partial functions (for example, adding a new parameter), we don't have to modify all of their declarations. This patch also updates the type of parameters of target_xfer_partial from "void *" to "gdb_byte *". gdb: 2013-12-18 Yao Qi <yao@codesourcery.com> * target.h (target_xfer_partial_ftype): New typedef. (target_xfer_partial): Update declaration. * auxv.h (memory_xfer_auxv): Likewise. * ia64-hpux-nat.c (super_xfer_partial): Likewise. * ia64-linux-nat.c (super_xfer_partial): Likewise. * linux-nat.c (super_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_beneath_to_xfer_partial): (tmp_to_xfer_partial): Likewise. * sparc-nat.c (inf_ptrace_xfer_partial): Likewise. * target.c (default_xfer_partial): Likewise. (current_xfer_partial): Likewise. (target_xfer_partial): Change parameter type to 'gdb_byte *'. |
||
|
Tom Tromey
|
53ce3c3929 |
remove gdb_stat.h
This patch is purely mechanical. It removes gdb_stat.h and changes the code to use sys/stat.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_stat.h: Remove. * ada-lang.c: Use sys/stat.h, not gdb_stat.h. * common/filestuff.c: Use sys/stat.h, not gdb_stat.h. * common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h. * corefile.c: Use sys/stat.h, not gdb_stat.h. * ctf.c: Use sys/stat.h, not gdb_stat.h. * darwin-nat.c: Use sys/stat.h, not gdb_stat.h. * dbxread.c: Use sys/stat.h, not gdb_stat.h. * dwarf2read.c: Use sys/stat.h, not gdb_stat.h. * exec.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h. * inf-child.c: Use sys/stat.h, not gdb_stat.h. * jit.c: Use sys/stat.h, not gdb_stat.h. * linux-nat.c: Use sys/stat.h, not gdb_stat.h. * m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h. * main.c: Use sys/stat.h, not gdb_stat.h. * mdebugread.c: Use sys/stat.h, not gdb_stat.h. * mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h. * nto-tdep.c: Use sys/stat.h, not gdb_stat.h. * objfiles.c: Use sys/stat.h, not gdb_stat.h. * procfs.c: Use sys/stat.h, not gdb_stat.h. * remote-fileio.c: Use sys/stat.h, not gdb_stat.h. * remote-mips.c: Use sys/stat.h, not gdb_stat.h. * remote.c: Use sys/stat.h, not gdb_stat.h. * rs6000-nat.c: Use sys/stat.h, not gdb_stat.h. * sol-thread.c: Use sys/stat.h, not gdb_stat.h. * solib-spu.c: Use sys/stat.h, not gdb_stat.h. * source.c: Use sys/stat.h, not gdb_stat.h. * symfile.c: Use sys/stat.h, not gdb_stat.h. * symmisc.c: Use sys/stat.h, not gdb_stat.h. * symtab.c: Use sys/stat.h, not gdb_stat.h. * top.c: Use sys/stat.h, not gdb_stat.h. * xcoffread.c: Use sys/stat.h, not gdb_stat.h. |
||
|
Tom Tromey
|
2978b11100 |
remove gdb_dirent.h
This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. |
||
|
Tom Tromey
|
0e9f083f4c |
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
||
|
Tom Tromey
|
52554a0e32 |
constify to_detach
This patch constifies the target_ops method to_detach. This is a small cleanup, but also, I think, a bug-prevention fix, since gdb already acts as if the "args" argument here was const. In particular, top.c:quit_force calls kill_or_detach via iterate_over_inferiors. kill_or_detach calls target_detach, passing the same argument each time. So, if one of these methods was not const-correct, then kill_or_detach would change its behavior in a strange way. I could not build every target I modified in this patch. I've inspected them all by hand, though. Many targets do not use the "args" parameter; a couple pass it to atoi; and a few pass it on to the to_detach method of the target beneath. The only code that required a real change was in linux-nat.c, and that only needed the introduction of a temporary variable for const-correctness. 2013-11-08 Tom Tromey <tromey@redhat.com> * aix-thread.c (aix_thread_detach): Update. * corelow.c (core_detach): Update. * darwin-nat.c (darwin_detach): Update. * dec-thread.c (dec_thread_detach): Update. * gnu-nat.c (gnu_detach): Update. * go32-nat.c (go32_detach): Update. * inf-ptrace.c (inf_ptrace_detach): Update. * inf-ttrace.c (inf_ttrace_detach): Update. * linux-fork.c (linux_fork_detach): Update. * linux-fork.h (linux_fork_detach): Update. * linux-nat.c (linux_nat_detach): Update. Introduce "tem" local for const-correctness. * linux-thread-db.c (thread_db_detach): Update. * monitor.c (monitor_detach): Update. * nto-procfs.c (procfs_detach): Update. * procfs.c (procfs_detach): Update. * record.c (record_detach): Update. * record.h (record_detach): Update. * remote-m32r-sdi.c (m32r_detach): Update. * remote-mips.c (mips_detach): Update. * remote-sim.c (gdbsim_detach): Update. * remote.c (remote_detach_1, remote_detach) (extended_remote_detach): Update. * sol-thread.c (sol_thread_detach): Update. * target.c (target_detach): Make "args" const. (init_dummy_target): Update. * target.h (struct target_ops) <to_detach>: Make argument const. (target_detach): Likewise. * windows-nat.c (windows_detach): Update. |
||
|
Pedro Alves
|
98882a2651 |
Make STARTUP_WITH_SHELL a runtime toggle -- add new "set/show startup-with-shell" option.
Occasionaly we hear about people having problems with GDB not being able to start programs (with "run"/"start"). GDB spawns a shell to start the program, and most often, it'll be the case that the problem is actually with the user's shell setup. GDB has code to disable the use of the shell to start programs. That's the STARTUP_WITH_SHELL macro that native targets could set to 0 in their nm.h file (though no target actually uses it nowadays). This patch makes that setting a run-time knob instead. This will be useful to quickly diagnose such shell issues, and might also come in handy at other times (such as when debugging the shell itself, if you don't have a different shell handy). gdb/ 2013-10-24 Pedro Alves <palves@redhat.com> * NEWS (New options): Mention set/show startup-with-shell. * config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2 instead of 3. * fork-child.c (fork_inferior, startup_inferior): Handle 'set startup-with-shell'. (show_startup_with_shell): New function. (_initialize_fork_child): Register the set/show startup-with-shell commands. * inf-ptrace.c (inf_ptrace_create_inferior): Remove comment. * inf-ttrace.c (inf_ttrace_him): Remove comment. * procfs.c (procfs_init_inferior): Remove comment. * infcmd.c (startup_with_shell): New global. * inferior.h (startup_with_shell): Declare global. (STARTUP_WITH_SHELL): Delete. (START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2. gdb/doc/ 2013-10-24 Pedro Alves <palves@redhat.com> * gdb.texinfo (Starting): Document set/show startup-with-shell. |
||
Joel Brobecker
|
793e1c063f |
Fix build failure in procfs.c after MERGEPID -> ptid_build conversion.
gdb/ChangeLog:
* procfs.c (procfs_init_inferior): Fix typo causing the build
to fail.
|
||
Luis Machado
|
dfd4cc6311 |
* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build. |
||
|
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
||
|
Pedro Alves
|
3e3420f6a1 |
2012-12-11 Pedro Alves <pedro@codesourcery.com>
Pedro Alves <palves@redhat.com> * procfs.c (procfs_make_note_section) [NEW_PROC_API]: Output a NT_PSTATUS note. * sol2-tdep.c (sol2_core_pid_to_str): Print process IDs differently from LWP IDs. |
||
|
Pedro Alves
|
05b4bd799a |
gdb/
2012-12-11 Pedro Alves <palves@redhat.com> * configure.ac (detect type of /proc): Remove Unixware handling. * configure: Regenerate. * proc-api.c (ioctl_table) [PIOCLSTATUS]: Don't mention Unixware. (ioctl_table) [PCRESET]: Remove entry. * proc-events.c (SYS_lwp_create, SYS_lwp_exit, SYS_lwp_wait) (SYS_lwp_self, SYS_lwp_info, SYS_lwp_private, SYS_lwp_kill) (SYS_lwp_suspend, SYS_lwp_continue): Don't define. * proc-why.c (pr_why_table) [PR_SUSPENDED]: Don't mention Unixware. * procfs.c: Remove all UNIXWARE guarded code, and all traces of Unixware in comments throughout. * i386-tdep.c (i386_svr4_sigtramp_p): Don't match _sigacthandler, and remove mention of Unixware. gdb/doc/ 2012-12-11 Pedro Alves <palves@redhat.com> * gdb.texinfo: Remove all mentions of Unixware throughout. |
||
|
Tom Tromey
|
f5656eadf4 |
* gdbarch.sh (target_gdbarch): Remove macro.
(get_target_gdbarch): Rename to target_gdbarch. * gdbarch.c, gdbarch.h: Rebuild. * ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c, arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c, darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c, filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c, ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c, mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c, mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c, nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c, procfs.c, progspace.c, ravenscar-thread.c, record.c, remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c, rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c, solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c, solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c, solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c, spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c, target-descriptions.c, target.c, target.h, tracepoint.c, windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c, common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/python.c: Update. |
||
|
Joel Brobecker
|
337c776f02 |
Make procfs.c:proc_get_LDT_entry static
This function is not used outside of procfs.c.
gdb/ChangeLog:
* procfs.c (proc_get_LDT_entry): Make static.
|
||
|
Joel Brobecker
|
1a04d88fbc |
Fix declaration of proc_find_memory_regions
This function is used as a target_ops callback. The function
implemention was recently changed, but the declaration wasn't
updated accordingly.
This fixes a build failure on Solaris.
gdb/ChangeLog:
* procfs.c (proc_find_memory_regions): Fix declaration.
|
||
Pierre Muller
|
9210735600 |
* procfs.c: Add gdb_bfd header.
* rs6000-nat.c: Likewise. * solib-pa64.c: Likewise. * spu-linux-nat.c: Likewise. * windows-nat.c: Likewise. |
||
Jan Kratochvil
|
4f69f4c267 |
gdb/
PR 11804 * defs.h (find_memory_region_ftype): New comment. New arg modified. * fbsd-nat.c (fbsd_find_memory_regions): Add the passed modified value. * gcore.c (gcore_create_callback): New function comment. Add modified parameter. Only write modified regions. Set SEC_READONLY exactly according to MODIFIED. (objfile_find_memory_regions): Ignore separate debug info files. Ass the passed modified value to FUNC. * gnu-nat.c (gnu_find_memory_regions): Add the passed modified value. * linux-tdep.c (linux_find_memory_regions): Try to reads smaps file first. New variables modified and has_anonymous. Parse the lines of smaps file. Add the passed MODIFIED value to FUNC. * procfs.c (find_memory_regions_callback): Add the passed modified value. gdb/testsuite/ PR 11804 * gdb.base/gcore-relro.exp: New file. * gdb.base/gcore-relro-main.c: New file. * gdb.base/gcore-relro-lib.c: New file. |
||
|
Tom Tromey
|
64c311498e |
* cli/cli-dump.c (bfd_openr_with_cleanup): Use gdb_bfd_openr.
(bfd_openw_with_cleanup): Use gdb_bfd_openw. * corelow.c (core_open): Use gdb_bfd_fopen. * dsrec.c (load_srec): Use gdb_bfd_openr. * exec.c (exec_file_attach): Use gdb_bfd_fopen. * gcore.c (gcore_memory_sections): Use gdb_bfd_openw. * gdb_bfd.c (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw) (gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file) (gdb_bfd_fdopenr): New functions. * gdb_bfd.h (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw) (gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file) (gdb_bfd_fdopenr): Declare. * jit.c (bfd_open_from_target_memory): Use gdb_bfd_openr_iovec. * m32-rom.c (m32r_load, m32r_upload_command): Use gdb_bfd_openr. * machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_openr, gdb_bfd_openr_next_archived_file. (macho_check_dsym): Use gdb_bfd_openr. (macho_add_oso_symfile): Don't call gdb_bfd_stash_filename. * procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_fdopenr. * remote-m32r-sdi.c (m32r_load): Use gdb_bfd_openr. * remote-mips.c (mips_load_srec, pmon_load_fast): Use gdb_bfd_openr. * remote.c (remote_bfd_open): Use gdb_bfd_openr_iovec. * rs6000-nat.c (add_vmap): Use gdb_bfd_openr, gdb_bfd_fdopenr, gdb_bfd_openr_next_archived_file. * solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_openr. * solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_openr. * solib-spu.c (spu_bfd_fopen): Use gdb_bfd_openr_iovec. * solib.c (solib_bfd_fopen): Use gdb_bfd_fopen. * spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_openr_iovec. * symfile.c (bfd_open_maybe_remote): Use gdb_bfd_openr. (symfile_bfd_open): Use gdb_bfd_fopen. (generic_load): Use gdb_bfd_openr. * windows-nat.c (windows_make_so): Use gdb_bfd_openr. |
||
|
Tom Tromey
|
520b0001c1 |
* bfd-target.c (target_bfd_reopen): Update.
* cli/cli-dump.c (bfd_openr_with_cleanup) (bfd_openw_with_cleanup): Update. * corelow.c (core_open): Update. * dsrec.c (load_srec): Update. * exec.c (exec_file_attach): Update. * gcore.c (create_gcore_bfd): Update. * gdb_bfd.c (gdb_bfd_ref): Return void. (gdb_bfd_open): Update. * gdb_bfd.h (gdb_bfd_ref): Return void. Update comments. * jit.c (jit_bfd_try_read_symtab): Update. * m32r-rom.c (m32r_load, m32r_upload_command): Update. * machoread.c (macho_symfile_read_all_oso): Update. (macho_check_dsym): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * remote-m32r-sdi.c (m32r_load): Update. * remote-mips.c (mips_load_srec, pmon_load_fast): Update. * rs6000-nat.c (add_vmap): Update. * solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-spu.c (spu_bfd_open): Update. * solib.c (solib_bfd_fopen, solib_read_symbols): Update. * spu-linux-nat.c (spu_bfd_open): Update. * symfile.c (bfd_open_maybe_remote, symfile_bfd_open) (generic_load): Update. * windows-nat.c (windows_make_so): Update. |
||
|
Tom Tromey
|
cbb099e886 |
* dwarf2read.c (try_open_dwo_file): Use gdb_bfd_ref and
gdb_bfd_unref. (free_dwo_file): Use gdb_bfd_unref. * cli/cli-dump.c: Include gdb_bfd.h. (bfd_openw_with_cleanup): Use gdb_bfd_ref. (bfd_openr_with_cleanup): Likewise. * windows-nat.c (windows_make_so): Use gdb_bfd_ref, gdb_bfd_unref. * utils.c: Include gdb_bfd.h. (do_bfd_close_cleanup): Use gdb_bfd_unref. * symfile.c: Include gdb_bfd.h. (separate_debug_file_exists): Use gdb_bfd_unref. (bfd_open_maybe_remote): Use gdb_bfd_ref. (symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref. (generic_load): Use gdb_bfd_ref. (reread_symbols): Use gdb_bfd_unref. * symfile-mem.c: Include gdb_bfd.h. (symbol_file_add_from_memory): Use make_cleanup_bfd_close. * spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref. * solib.c: Include gdb_bfd.h. (solib_bfd_fopen): Use gdb_bfd_ref. (solib_bfd_open): Use gdb_bfd_unref. (free_so_symbols): Use gdb_bfd_unref. (reload_shared_libraries_1): Use gdb_bfd_unref. * solib-spu.c: Include gdb_bfd.h. (spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref. * solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref, gdb_bfd_unref. * solib-frv.c: Include gdb_bfd.h. (enable_break2): Use gdb_bfd_unref. * solib-dsbt.c: Include gdb_bfd.h. (enable_break2): Use gdb_bfd_unref. * solib-darwin.c: Include gdb_bfd.h. (darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref, gdb_bfd_unref. (darwin_bfd_open): Use gdb_bfd_unref. * rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref. * remote-mips.c: Include gdb_bfd.h. (mips_load_srec): Use gdb_bfd_ref. (pmon_load_fast): Use gdb_bfd_ref. * remote-m32r-sdi.c: Include gdb_bfd.h. (m32r_load): Use gdb_bfd_ref. * record.c: Include gdb_bfd.h. (record_save_cleanups): Use gdb_bfd_unref. (cmd_record_save): Use gdb_bfd_unref. * procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref, gdb_bfd_unref. * objfiles.h (gdb_bfd_close_or_warn): Remove. (gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h. * objfiles.c: Include gdb_bfd.h. (free_objfile): Use gdb_bfd_unref. (gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.c. * machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref. (macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref. (macho_check_dsym): Likewise. * m32r-rom.c: Include gdb_bfd.h. (m32r_load): Use gdb_bfd_ref. (m32r_upload_command): Use gdb_bfd_ref. * jit.c: Include gdb_bfd.h. (jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref. * gdb_bfd.h: New file. * gdb_bfd.c: New file. * gcore.c: Include gdb_bfd.h. (create_gcore_bfd): Use gdb_bfd_ref. (do_bfd_delete_cleanup): Use gdb_bfd_unref. (gcore_command): Use gdb_bfd_unref. * exec.c: Include gdb_bfd.h. (exec_close): Use gdb_bfd_unref. (exec_close_1): Use gdb_bfd_unref. (exec_file_attach): Use gdb_bfd_ref. * elfread.c: Include gdb_bfd.h. (build_id_verify): Use gdb_bfd_unref. * dsrec.c: Include gdb_bfd.h. (load_srec): Use gdb_bfd_ref. * corelow.c: Include gdb_bfd.h. (core_close): Use gdb_bfd_unref. (core_open): Use gdb_bfd_ref. * bfd-target.c: Include gdb_bfd.h. (target_bfd_xclose): Use gdb_bfd_unref. (target_bfd_reopen): Use gdb_bfd_ref. * Makefile.in (SFILES): Add gdb_bfd.c. (HFILES_NO_SRCDIR): Add gdb_bfd.h. (COMMON_OBS): Add gdb_bfd.o. |
||
|
Pedro Alves
|
a493e3e2e4 |
gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
|
||
|
Pedro Alves
|
2ea286498f |
gdb/
2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. |
||
|
Joel Brobecker
|
d3581e618a |
procfs.c: Remove unused functions and make many functions static
gdb/ChangeLog:
* procfs.c (procfs_find_new_threads, procfs_pid_to_str,
proc_warn, proc_error, proc_get_status, proc_flags,
proc_why, proc_what, proc_nsysarg, proc_sysargs,
proc_set_run_on_last_close, proc_unset_run_on_last_close,
proc_unset_inherit_on_fork, proc_set_async, proc_unset_async,
proc_stop_process, proc_wait_for_stop, proc_run_process,
proc_set_traced_signals, proc_set_traced_faults,
proc_set_traced_sysentry, proc_set_traced_sysexit,
proc_set_held_signals, proc_get_held_signals,
proc_get_traced_signals, proc_get_traced_faults,
proc_get_traced_sysentry, proc_get_traced_sysexit,
proc_clear_current_fault, proc_set_current_signal,
proc_clear_current_signal, proc_get_gregs, proc_get_fpregs,
proc_set_gregs, proc_set_fpregs, proc_kill, proc_parent_pid,
proc_get_nthreads, proc_get_nthreads, proc_get_nthreads,
proc_get_current_thread, proc_get_current_thread,
proc_get_current_thread, proc_update_threads,
proc_update_threads, proc_update_threads, proc_update_threads,
proc_iterate_over_threads, procfs_find_new_threads,
procfs_pid_to_str): Make static. Remove advance declaration.
(proc_cursig): Make static. Conditionalized defintion on
PROCFS_DONT_PIOCSSIG_CURSIG being defined.
(proc_syscall, proc_set_kill_on_last_close,
proc_unset_kill_on_last_close, proc_set_inherit_on_fork,
proc_get_pending_signals, proc_get_signal_actions,
proc_trace_signal, proc_ignore_signal): Delete.
|
||
Maciej W. Rozycki
|
a0911fd020 |
* proc-utils.h (proc_prettyprint_signalset): New prototype.
(proc_prettyprint_signal): Likewise. (proc_prettyprint_faultset): Likewise. (proc_prettyprint_fault): Likewise. (proc_prettyprint_actionset): Likewise. (proc_prettyprint_flags): Move to new proc-flags.c section. (proc_prettyfprint_flags): New prototype. * procfs.c (proc_nsysarg, proc_sysargs): Add prototypes. (proc_syscall, proc_cursig): Likewise. (proc_set_kill_on_last_close): Likewise. (proc_unset_kill_on_last_close): Likewise. (proc_set_watchpoint): Make static. (proc_delete_dead_threads): Likewise. (procfs_set_watchpoint): Likewise. (_initialize_procfs): Add prototype. * proc-events.c: Include proc-utils.h. (init_syscall_table): Make static. * proc-api.c (_initialize_proc_api): Add prototype. * proc-flags.c: Include proc-utils.h. |
||
Jim Meyering
|
4e2af517f1 |
avoid a few strncpy-induced buffer overruns
* procfs.c (procfs_make_note_section): Be sure to NUL-terminate fname and psargs before trying to concatenate. * tui/tui-stack.c (tui_get_function_from_frame): NUL-terminate "name" before applying strchr. |
||
Thomas Schwinge
|
a5362b9aa4 |
struct siginfo vs. siginfo_t
gdb/ * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Use siginfo_t instead of struct siginfo. * arm-linux-nat.c (arm_linux_stopped_data_address): Likewise. * ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise. * linux-nat.c (linux_nat_siginfo_fixup, siginfo_fixup) (linux_xfer_siginfo, linux_nat_set_siginfo_fixup) (linux_nat_get_siginfo): Likewise. * linux-nat.h (struct lwp_info, linux_nat_set_siginfo_fixup) (linux_nat_get_siginfo): Likewise. * linux-tdep.c (linux_get_siginfo_type): Likewise. * ppc-linux-nat.c (ppc_linux_stopped_data_address): Likewise. * procfs.c (gdb_siginfo_t): Likewise. gdbserver/ * linux-arm-low.c (arm_stopped_by_watchpoint): Use siginfo_t instead of struct siginfo. * linux-low.c (siginfo_fixup, linux_xfer_siginfo): Likewise. * linux-x86-low.c (x86_siginfo_fixup): Likewise. * linux-low.h: Include <signal.h>. (struct siginfo): Remove forward declaration. (struct linux_target_ops) <siginfo_fixup>: Use siginfo_t instead of struct siginfo. |
||
Ulrich Weigand
|
145b16a97a |
ChangeLog:
* defs.h (enum info_proc_what): Moved here from linux-nat.c * infcmd.c: (info_proc_cmd_1): New function. (info_proc_cmd): New function, moved here from equivalent routine orignally in linux-nat.c. (info_proc_cmd_mappings): Likewise. (info_proc_cmd_stat): Likewise. (info_proc_cmd_status): Likewise. (info_proc_cmd_cwd): Likewise. (info_proc_cmd_cmdline): Likewise. (info_proc_cmd_exe): Likewise. (info_proc_cmd_all): Likewise. (_initialize_infcmd): Install "info proc" command and subcommands. * target.h (struct target_ops): Add to_info_proc. (target_info_proc): Add prototype. * target.c (target_info_proc): New function. * procfs.c (procfs_info_proc): Add prototype. (info_proc_cmd): Rename into ... (procfs_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. Handle "what" argument. (procfs_target): Install procfs_info_proc. (_initialize_procfs): No longer install "info proc" command. * linux-nat.c: (enum info_proc_what): Remove. (linux_nat_info_proc_cmd_1): Rename into ... (linux_nat_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. (linux_nat_info_proc_cmd): Remove. (linux_nat_info_proc_cmd_mappings): Likewise. (linux_nat_info_proc_cmd_stat): Likewise. (linux_nat_info_proc_cmd_status): Likewise. (linux_nat_info_proc_cmd_cwd): Likewise. (linux_nat_info_proc_cmd_cmdline): Likewise. (linux_nat_info_proc_cmd_exe): Likewise. (linux_nat_info_proc_cmd_all): Likewise. (linux_target_install_ops): Install linux_nat_info_proc. (_initialize_linux_nat): No longer install "info proc" command and subcommands. testsuite/ChangeLog: * gdb.base/info-proc.exp: Also run on remote targets. Main "info proc" command is now always present; whether target supports actual info proc operation is detected when attempting to issue the command. |
||
|
Joel Brobecker
|
0b30217134 |
Copyright year update in most files of the GDB Project.
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
||
|
Joel Brobecker
|
e28cade762 |
procfs file descriptor leaks
gdb/ChangeLog (from Tom Tromey): * procfs.c (load_syscalls): Make a cleanup. (open_procinfo_files): fd==0 is ok. |
||
|
Joel Brobecker
|
0a86f36427 |
[procfs] /proc/.../map file descriptor leak
When opening the procfs map file, we create a cleanup routine to make
sure that the associated file descriptor gets closed, but we never
call the cleanup. So the FD gets leaked.
gdb/ChangeLog:
* procfs.c (iterate_over_mappings): Call do_cleanups before
returning.
|
||
Tristan Gingold
|
e69860f1b6 |
2011-09-22 Tristan Gingold <gingold@adacore.com>
* fork-child.c (fork_inferior): Add exec_fun parameter. Call exec_fun or execvp. * inferior.h: Adjust prototype. * gnu-nat.c (gnu_create_inferior): Adjust fork_inferior call. * inf-ttrace.c (inf_ttrace_create_inferior): Ditto. * inf-ptrace.c (inf_ptrace_create_inferior): Ditto. * procfs.c (procfs_create_inferior): Ditto. * darwin-nat.c (darwin_execvp): New function. (darwin_create_inferior): Use it. |
||
|
Joel Brobecker
|
13bdd2e791 |
fix procfs.c:procfs_pass_signals advance declaration
gdb/ChangeLog: * procfs.c (procfs_pass_signals): Fix advance declaration. |
||
|
Ulrich Weigand
|
2455069d93 |
* target.h (struct target_ops): Remove to_notice_signals;
add to_pass_signals. (target_notice_signals): Remove. (target_pass_signals): Add prototype. * target.c (update_current_target): Remove to_notice_signals; mention to_pass_signals. (target_pass_signals): New function. (debug_to_notice_signals): Remove. (setup_target_debug): Do not install debug_to_notice_signals. * infrun.c (signal_pass): New global. (resume): Call target_pass_signals. (handle_inferior_event): Report all signals while stepping over non-steppable watchpoint. Reset trap_expected to ensure breakpoints are re-inserted when stepping over a signal handler. (signal_cache_update): New function. (signal_stop_update): Call it. (signal_print_update): Likewise. (signal_pass_update): Likewise. (handle_command): Call signal_cache_update and target_pass_signals instead of target_notice_signals. (_initialize_infrun): Initialize signal_pass. * linux-nat.c (pass_mask): New global. (linux_nat_pass_signals): New function. (linux_nat_create_inferior): Report all signals initially. (linux_nat_attach): Likewise. (linux_nat_resume): Use pass_mask to decide whether to directly handle an inferior signal. (linux_nat_wait_1): Likewise. (linux_nat_add_target): Install to_pass_signals callback. * nto-procfs.c (notice_signals): Remove. (procfs_resume): Do not call notice_signals. (procfs_notice_signals): Remove. (procfs_pass_signals): New function. (init_procfs_ops): Install to_pass_signals callback instead of to_notice_signals callback. (_initialize_procfs): Report all signals initially. * procfs.c (procfs_notice_signals): Remove. (procfs_pass_signals): New function. (procfs_target): Install to_pass_signals callback instead of to_notice_signals callback. (register_gdb_signals): Remove. (procfs_debug_inferior): Report all signals initially. (procfs_init_inferior): Remove redundant register_gdb_signals call. * remote.c (remote_pass_signals): Add numsigs and pass_signals parameters; use them instead of calling signal_..._state routines. (remote_notice_signals): Remove. (remote_start_remote): Report all signals initially. (remote_resume): Do not call remote_pass_signals. (_initialize_remote): Install to_pass_signals callback instead of to_notice_signals callback. |
||
|
Pedro Alves
|
9f37bbcca8 |
* cli/cli-cmds.c (shell_escape): Use lbasename.
* coffread.c (coff_start_symtab): Constify parameter. (complete_symtab): Constify `name' parameter. (coff_symtab_read): Constify `filestring' local. (coff_getfilename): Constify return and `result' local. Use lbasename. * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename. * linux-fork.c (info_checkpoints_command): Use lbasename. * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename. * minsyms.c (lookup_minimal_symbol): Use lbasename. * nto-tdep.c (nto_find_and_open_solib): Use lbasename. * procfs.c (procfs_make_note_section): Use lbasename. * tui/tui-io.c (printable_part): Constity return and parameter. Use lbasename. (print_filename): Constify parameters, and local `s'. (tui_rl_display_match_list): Constify local `temp'. |
||
Michael Snyder
|
9b20d036b6 |
2011-01-11 Michael Snyder <msnyder@vmware.com>
* arm-tdep.c: Internationalization. * c-lang.c: Ditto. * charset.c: Ditto. * fork-child.c: Ditto. * nto-procfs.c: Ditto. * ppc-sysv-tdep.c: Ditto. * procfs.c: Ditto. * remote-mips.c: Ditto. * remote.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto. * target.c: Ditto. * valops.c: Ditto. * value.c: Ditto. * xml-support.c: Ditto. * mi/mi-cmd-break.c: Ditto. * mi/mi-cmd-var.c: Ditto. * mi/mi-interp.c: Ditto. * mi/mi-main.c: Ditto. |
||
|
Michael Snyder
|
0df8b4180a |
2011-01-10 Michael Snyder <msnyder@vmware.com>
* nto-procfs.c: Comment cleanup, mostly periods and spaces. * nto-tdep.c: Ditto. * nto-tdep.h: Ditto. * objc-exp.y: Ditto. * objc-lang.c: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * observer.c: Ditto. * opencl-lang.c: Ditto. * osabi.c: Ditto. * parse.c: Ditto. * parser-defs.h: Ditto. * p-exp.y: Ditto. * p-lang.c: Ditto. * posix-hdep.c: Ditto. * ppcbug-rom.c: Ditto. * ppc-linux-nat.c: Ditto. * ppc-linux-tdep.c: Ditto. * ppc-linux-tdep.h: Ditto. * ppcnbsd-tdep.c: Ditto. * ppcobsd-tdep.c: Ditto. * ppcobsd-tdep.h: Ditto. * ppc-sysv-tdep.c: Ditto. * ppc-tdep.h: Ditto. * printcmd.c: Ditto. * proc-abi.c: Ditto. * proc-flags.c: Ditto. * procfs.c: Ditto. * proc-utils.h: Ditto. * progspace.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * ravenscar-sparc-thread.c: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote.c: Ditto. * remote-fileio.c: Ditto. * remote-fileio.h: Ditto. * remote.h: Ditto. * remote-m32r-sdi.c: Ditto. * remote-mips.c: Ditto. * remote-sim.c: Ditto. * rs6000-aix-tdep.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto. |
||
|
Michael Snyder
|
3e43a32aaa |
2011-01-05 Michael Snyder <msnyder@vmware.com>
* addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto. |
||
|
Joel Brobecker
|
7b6bb8daac | run copyright.sh for 2011. | ||
|
Jan Kratochvil
|
16c381f058 |
gdb/
Rename and move inferior_thread_state and inferior_status. * gdbthread.h (struct thread_control_state): New struct, move fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step and stop_bpstat here from struct thread_info. (struct thread_suspend_state): New struct, move field stop_signal here from struct thread_info. (struct thread_info): Move the fields above from this struct. * inferior.h: Move the inferior_thread_state and inferior_status declarations comment to their definitions at infrun.c. (struct inferior_control_state): New struct, move field stop_soon from struct inferior here. (struct inferior_suspend_state): New empty struct. (struct inferior): New fields control and suspend. Move out field stop_soon. * infrun.c (struct inferior_thread_state): Rename to ... (infcall_suspend_state): ... here. Replace field stop_signal by fields thread_suspend and inferior_suspend. (save_inferior_thread_state): Rename to ... (save_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (restore_inferior_thread_state): Rename to ... (restore_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (do_restore_inferior_thread_state_cleanup): Rename to ... (do_restore_infcall_suspend_state_cleanup): ... here. (make_cleanup_restore_inferior_thread_state): Rename to ... (make_cleanup_restore_infcall_suspend_state): ... here. (discard_inferior_thread_state): Rename to ... (discard_infcall_suspend_state): ... here. (get_inferior_thread_state_regcache): Rename to ... (get_infcall_suspend_state_regcache): ... here. (struct inferior_status): Rename to ... (struct infcall_control_state): ... here. Replace fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step, stop_bpstat and stop_soon by fields thread_control and inferior_control. (save_inferior_status): Rename to ... (save_infcall_control_state): ... here. Update the code for new fields. (restore_inferior_status): Rename to ... (restore_infcall_control_state): ... here. Update the code for new fields. (do_restore_inferior_status_cleanup): Rename to ... (do_restore_infcall_control_state_cleanup): ... here. (make_cleanup_restore_inferior_status): Rename to ... (make_cleanup_restore_infcall_control_state): ... here. (discard_inferior_status): Rename to ... (discard_infcall_control_state): ... here. * alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h, exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c, inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c, mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c, solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the references to the moved fields and renamed functions. |
||
|
Jan Kratochvil
|
b8edc417a7 |
gdb/
Code cleanup. * defs.h (find_memory_region_ftype): New typedef. (exec_set_find_memory_regions): Use it. * exec.c (exec_set_find_memory_regions): Use find_memory_region_ftype. * fbsd-nat.c (fbsd_find_memory_regions): Likewise. * gcore.c (objfile_find_memory_regions): Likewise. * gnu-nat.c (gnu_find_memory_regions): Likewise. * linux-nat.c (linux_nat_find_memory_regions): Likewise. * procfs.c (iterate_over_mappings_cb_ftype): Remove. (iterate_over_mappings): Rename iterate_over_mappings_cb_ftype to find_memory_region_ftype. (insert_dbx_link_bpt_in_region): Likewise. (iterate_over_mappings): Likewise. Drop the comment part about the function prototype. (find_memory_regions_callback): Use find_memory_region_ftype. (proc_find_memory_regions): Likewise. (info_mappings_callback): Rename iterate_over_mappings_cb_ftype to find_memory_region_ftype. * target.c (dummy_find_memory_regions): Use find_memory_region_ftype. * target.h (struct target_ops) <to_find_memory_regions>: Likewise. |
||
Thiago Jung Bauermann
|
0cf6dd1543 |
2010-07-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com> Support for hw accelerated condition watchpoints in booke powerpc. * breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value and move to eval.c. Change callers. (insert_bp_location): Pass watchpoint condition in target_insert_watchpoint. (remove_breakpoint_1) Pass watchpoint condition in target_remove_watchpoint. (watchpoint_locations_match): Call target_can_accel_watchpoint_condition. * eval.c: Include wrapper.h. (fetch_subexp_value): Moved from breakpoint.c. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Formatting fix. (can_use_watchpoint_cond_accel): New function. (calculate_dvc): Likewise. (num_memory_accesses): Likewise. (check_condition): Likewise. (ppc_linux_can_accel_watchpoint_condition): Likewise (ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel, check_condition and calculate_dvc. (ppc_linux_remove_watchpoint): Likewise. (_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to ppc_linux_can_accel_watchpoint_condition * target.c (debug_to_insert_watchpoint): Add argument for watchpoint condition. (debug_to_remove_watchpoint): Likewise. (debug_to_can_accel_watchpoint_condition): New function. (update_current_target): Set to_can_accel_watchpoint_condition. (setup_target_debug): Set to_can_accel_watchpoint_condition. * target.h: Add opaque declaration for struct expression. (struct target_ops) <to_insert_watchpoint>, <to_remove_watchpoint>: Add new arguments to pass the watchpoint <to_can_accel_watchpoint_condition>: New member. condition. Update all callers and implementations. (target_can_accel_watchpoint_condition): New macro. * value.c (free_value_chain): New function. * value.h (fetch_subexp_value): New prototype. (free_value_chain): Likewise. |
||
|
Pedro Alves
|
cce7e648b9 |
* breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove
unnecessary space in string. * filesystem.c (_initialize_filesystem): Ditto. * frame.c (_initialize_frame): Ditto. * infcmd.c (step_once): Ditto. * infrun.c (_initialize_infrun): Ditto. * linux-nat.c (linux_child_follow_fork): Ditto. * maint.c (maintenance_deprecate): Ditto. * memattr.c (_initialize_mem): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * monitor.c (monitor_open): Ditto. * procfs.c (procfs_xfer_memory): Ditto. * reverse.c (bookmarks_info): Ditto. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto. * stack.c (_initialize_stack): Ditto. * tracepoint.c (_initialize_tracepoint): Ditto. * xtensa-tdep.c (xtensa_supply_gregset, xtensa_regset_from_core_section): Ditto. |
||
|
Michael Snyder
|
f4a14ae60d |
2010-05-17 Michael Snyder <msnyder@vmware.com>
* procfs.c: White space. |
||
|
Pedro Alves
|
77382aeed2 | * procfs.c: Reformat. | ||
|
Pierre Muller
|
bf701c2c79 |
* procfs.c (proc_watchpoint_address): New function.
(procfs_stopped_by_watchpoint): Remove useless check after find_procinfo_or_die call. (procfs_stopped_data_address): New function. (procfs_use_watchpoints): Register new watchpoint related function. |
||
|
Joel Brobecker
|
1ca8fce046 |
Unused function in procfs.c on alpha-tru64.
The procfs_address_to_host_pointer function was not used outside of
alpha-tru64, and thus was triggering a compiler warning. Adjusted
accordingly.
gdb/ChangeLog:
* procfs.c (procfs_address_to_host_pointer): Only define when used.
|
||
|
Joel Brobecker
|
e9ef4f394d |
procfs.c: iterate_over_mappings callback has wrong profile.
The function proc_find_memory_regions calls iterate_over_mappings as
follow:
> return iterate_over_mappings (pi, func, data,
> find_memory_regions_callback);
The problem is that both func and find_memory_regions_callback
do not match the profile expected by iterate_over_mappings:
> iterate_over_mappings (procinfo *pi, int (*child_func) (), void *data,
> int (*func) (struct prmap *map,
> int (*child_func) (),
> void *data))
We cannot change proc_find_memory_regions such that FUNC is a pointer
to a function that takes no argument (in place of the 6 that it has).
This is because proc_find_memory_regions is used as a target_ops method.
However, it turns out that changing iterate_over_mappings to conform
to the profile imposed by the target_ops vector is possible without
much effort.
gdb/ChangeLog:
* procfs.c (iterate_over_mappings_cb_ftype): New typedef.
(iterate_over_mappings): Adjust function profile. Add declaration.
(insert_dbx_link_bpt_in_region, info_mappings_callback):
Adjust accordingly.
|
||
|
Joel Brobecker
|
e294797a88 |
procfs.c: Move solib_mappings_callback up to avoid compiler warning.
There are currently 2 issues with the placement of this routine:
- It's defined after it is being used (causing an implicit declaration);
- It looks like it's being defined all the time, whereas it is used
only on mips-irix (AFAICT) - shouldn't have this triggered a warning
on sparc-solaris, for instance???
In any case, this patch moves this function up, inside the right region,
just before the function where it is actually used.
gdb/ChangeLog:
* procfs.c (solib_mappings_callback): Move function up to avoid
a compiler warning.
|
||
|
Joel Brobecker
|
a223f1e7a0 |
procfs.c: Move find_signalled_thread and find_stop_signal.
These two functions are only used from procfs_make_note_section, which
itself is only defined if:
#if defined (UNIXWARE) || defined (PIOCOPENLWP) || defined (PCAGENT)
So these two functions are unused on mips-irix, and they get flagged
by -Wunused-function. This patch simply moves these functions closer
to the function that uses them, which also has the effect of putting
them inside the same #if block as procfs_make_note_section. Thus
they are defined only when used.
gdb/ChangeLog:
* procfs.c (find_signalled_thread, find_stop_signal): Move
these functions down to define them only when used.
|
||
|
Jan Kratochvil
|
74164c5624 |
gdb/
* defs.h (parse_pid_to_attach): New. * utils.c (parse_pid_to_attach): New. * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid. * gnu-nat.c (gnu_attach): Likewise. * nto-procfs.c (procfs_attach): Likewise. * procfs.c (procfs_attach): Likewise. * windows-nat.c (windows_attach): Likewise. * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy. * inf-ttrace.c (inf_ttrace_attach): Likewise. * remote.c (extended_remote_attach_1): Likewise. New comment on getpid check. gdb/testsuite/ * gdb.base/attach.exp (attach to nonsense is prohibited): Make the "Illegal process-id" expect string more exact. (attach to digits-starting nonsense is prohibited): New. |
||
|
Joel Brobecker
|
7434dadd5d |
Another -Wunused-function error in procfs.c (sparc-solaris)
* procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
Only define if SYS_syssgi is defined.
(remove_dbx_link_breakpoint): Delete declaration. Move up.
(dbx_link_addr, insert_dbx_link_bpt_in_file)
(insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
is itself defined.
|
||
|
Jan Kratochvil
|
9f2982ff0b |
gdb/
Support Valgrind attachments broken by the PIE support. * auxv.c: Include gdbcore.h. (procfs_xfer_auxv): Make static. Reduce its comment. Drop its parameters ops, object and annex. Remove their assertions. (ld_so_xfer_auxv, memory_xfer_auxv): New function. * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ... (memory_xfer_auxv): ... here. * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to memory_xfer_auxv. * procfs.c (procfs_xfer_partial): Likewise. * solib-svr4.c (svr4_relocate_main_executable): New prototype. (svr4_special_symbol_handling): Call svr4_relocate_main_executable. (svr4_solib_create_inferior_hook): Conditionalize the svr4_relocate_main_executable call. gdb/testsuite/ * gdb.base/valgrind-db-attach.exp, gdb.base/valgrind-db-attach.c: New. |
||
|
Joel Brobecker
|
27087a3dc2 |
Breakpoint in shared library does not work on mips-irix.
* procfs.c: #include "observer.h".
(procfs_inferior_created): New function, moving here the code
which unsets the syssgi syscall-exit notifications.
(procfs_create_inferior): Remove the code which unsets the syssgi
syscall-exit notifications. It is too early to do this here.
(_initialize_procfs): Attach the procfs_inferior_created observer.
|
||
|
Joel Brobecker
|
3c95f01cee |
-Wunused warning in procfs.c (mips-irix only).
* procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
throughout instead of using praddset and prdelset respectively.
|
||
|
Joel Brobecker
|
4c49065043 | * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus. | ||
|
Joel Brobecker
|
4c38e0a4fc |
Update copyright year in most headers.
Automatic update by copyright.sh. |
||
Daniel Jacobowitz
|
751254059d |
2009-11-10 Daniel Gutson <dgutson@codesourcery.com>
* procfs.c (procfs_do_thread_registers): Added a call to fetch register values before saving them in the core file through the gcore command. (procfs_corefile_thread_callback): Removed the backup of inferior_ptid before calling procfs_do_thread_registers since the function already saves and restores it before returning. |
||
|
Pierre Muller
|
47607d6f7c |
* rs6000-nat.c (exec_one_dummy_insn): Add missing new ASPACE parameter
to depreacted_insert_raw_breakpoint function call. * procfs.c (insert_dbx_link_bpt_in_file): Likewise. |
||
|
Pedro Alves
|
6c95b8df7f |
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode". |
||
|
Pedro Alves
|
8903eff681 |
* procfs.c (procfs_make_note_section): Go back to only outputing
an NT_PSTATUS note when UNIXWARE is defined. |
||
|
Pedro Alves
|
651c8d2d6c |
* procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
note when NEW_PROC_API is defined. |
||
Kazu Hirata
|
73930d4df0 |
* procfs.c (proc_set_current_signal): Populate mysinfo before
copying it to arg. (proc_clear_current_signal): Likewise. (proc_set_watchpoint): Populate pwatch before copying it to arg. |
||
|
Ulrich Weigand
|
e17a411335 |
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise. |
||
|
Ulrich Weigand
|
a6d9a66e23 |
* breakpoint.h (struct breakpoint): New member GDBARCH.
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
|
||
|
Ulrich Weigand
|
a97b0ac8cf |
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
of current_gdbarch. * aix-thread.c (pd_enable): Likewise. * amd64-linux-nat.c (ps_get_thread_area): Likewise. * bsd-uthread.c (bsd_uthread_activate): Likewise. * linux-nat.c (linux_nat_info_proc_cmd): Likewise. * linux-thread-db.c (enable_thread_event): Likewise. * monitor.c (monitor_write_memory, monitor_read_memory): Likewise. * nto-procfs.c (procfs_open): Likewise. * procfs.c (invalidate_cache, procfs_insert_watchpoint, info_proc_mappings, info_mappings_callback): Likewise. * record.c (record_open): Likewise. * rs6000-nat.c (ARCH64): Likewise. * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. (darwin_bfd_open): Likewise. * memattr.c (mem_info_command): Likewise. * windows-nat.c (win32_resume): Use current regcache architecture instead of current_gdbarch. * dbug-rom.c (dbug_regname): Remove check against number of registers in current_gdbarch. * solib-pa64.c (read_dynamic_info): Remove unused variable. |
||
|
Pedro Alves
|
d1a7880c77 |
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* procfs.h: New. * proc-utils.h (procfs_first_available): Don't declare here. * sol-thread.c: Include procfs.h instead of sys/procfs.h and proc-utils.h. * procfs.c: Include procfs.h. (procfs_target): Make it public. Don't register procfs_can_use_hw_breakpoint here. (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_can_use_hw_breakpoint): Remove check of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint here. (_initialize_procfs): Don't add the procfs target here. * i386-sol2-nat.c: Include target.h and procfs.h. (_initialize_amd64_sol2_nat): Install the procfs target here, customized with watchpoints support. * irix5-nat.c: Include target.h. (_initialize_core_irix5): Rename to ... (_initialize_irix5_nat): ... this. Install the procfs target here, customized with watchpoints support. * alpha-nat.c: Include procfs.h. (_initialize_core_alpha): Rename to... (_initialize_alpha_nat): ... this. Install the procfs target here, customized with watchpoints support. * sparc-sol2-nat.c: Include target.h and procfs.h. (_initialize_sparc_sol2_nat): New. * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/mips/irix5.mh (NAT_FILE): Delete. * config/mips/irix6.mh (NAT_FILE): Delete. * config/mips/nm-irix5.h: Delete. 2009-06-07 Pedro Alves <pedro@codesourcery.com> * gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all references. |
||
|
Pedro Alves
|
09d3bde977 |
* inferior.h (proc_iterate_over_mappings): Delete declaration.
* nto-tdep.h (proc_iterate_over_mappings): Delete declaration. * procfs.c (proc_iterate_over_mappings): Delete. |
||
|
Pierre Muller
|
4fcbb49441 | * procfs.c (procfs_wait): Add options parameter. | ||
|
Pedro Alves
|
7e1789f556 |
* inflow.h (our_process_group): Remove declaration.
(inferior_process_group): Delete global variable declaration. (inferior_process_group): New function declaration. * inflow.c: Include observer.h. (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours): Delete. (struct terminal_info): New struct. (our_terminal_info): New global. (inferior_process_group): New function. (inferior_thisrun_terminal): Extend description comment. (gdb_has_a_terminal): Adjust to write to our_terminal_info fields instead of globals. (terminal_init_inferior_with_pgrp): Adjust to per-inferior terminal settings. (terminal_inferior): Ditto. (terminal_ours_1): Ditto. (inflow_new_inferior, inflow_inferior_exit): New functions. (child_terminal_info): Adjust to per-inferior terminal settings. (osig_set): New global. (set_sigint_trap): Adjust to per-inferior terminal settings. Set or clear `osig_set' accordingly. (clear_sigint_trap): Check `osig_set' to decide wheater to restore SIGINT handler, instead of checking the current inferior (which may be none). (_initialize_inflow): Attach inflow_new_inferior and inflow_inferior_exit to the "new_inferior" and "inferior_exit" notifications, respectively. * inferior.h (struct terminal_info): Forward declare. (struct inferior): Add `terminal_info' field. * inferior.c (delete_inferior_1): Notify the inferior_exit observers before removing the inferior from the lists and deleting it. * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now a function instead of a variable. Adjust. * procfs.c (procfs_stop): Ditto. |
||
|
Pierre Muller
|
d92524f1ee |
Unify target macros.
* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ... (target_stoppped_by_watchpoint): New macro. (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ... (target_have_steppable_watchpoint): New macro. (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ... (target_have_continuable_watchpoint): New macro. (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ... (target_can_use_hardware_watchpoint): New macro. (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ... (target_region_ok_for_hw_watchpoint): New macro. * breakpoint.c (update_watchpoint): Use new macros. (bpstat_alloc): Likewise. (create_breakpoint): Likewise. (watch_command_1): Likewise. (can_use_hardware_watchpoint): Likewise. (do_enable_breakpoint): Likewise. * infrun.c (handle_inferior_event): Adapt to new macros. * mips-tdep.c (mips_gdbarch_init): Update comments. * procfs.c (procfs_set_watchpoint): Update comment. (procfs_insert_watchpoint): Adapt to new macros. * remote-m32r-sdi.c (m32r_stop): * remote-mips.c (mips_remove_breakpoint): * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros. (debug_to_stopped_by_watchpoint): Likewise. |
||
|
Pedro Alves
|
25513619db |
* procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
(procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New functions. (procfs_stopped_by_watchpoint): Made static, ptid argument removed. (_initialize_procfs): Register new watchpoint related target functions. * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. |
||
|
Ulrich Weigand
|
fb14de7bbd |
* inferior.h (read_pc, write_pc): Remove.
* regcache.c (read_pc, write_pc): Remove. * infrun.c (displaced_step_fixup): Use regcache_read_pc instead of read_pc. (handle_inferior_event): Use regcache_read_pc instead of read_pc when determining value of stop_pc. Replace subsequent uses of read_pc by inspecting already-retrieved stop_pc value. (keep_going): Use regcache_read_pc instead of read_pc. * breakpoint.c (watchpoint_check): Use current frame architecture and PC instead of current_gdbarch and read_pc (). * tracepoint.c (set_traceframe_context): Replace PC argument with FRAME argument. (trace_start_command, finish_tfind_command): Update calls. (finish_tfind_command): Compare frame IDs to identify transitions between frames. (trace_find_pc_command): Use regcache_read_pc instead of read_pc. * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead of gdbarch. Use regcache_read_pc and regcache_write_pc instead of read_pc and write_pc. (store_register): Make regcache argument non-const. Update call to exec_one_dummy_insn. * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc. * infcmd.c (post_create_inferior): Likewise. * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise. * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise. * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise. * linux-fork.c (fork_load_infrun_state): Likewise. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise. * record.c (record_wait): Likewise. * procfs.c (procfs_wait): Likewise. * remote-mips.c (common_open, mips_wait): Likewise. * remote-m32r-sdi.c (m32r_resume): Likewise. * symfile.c (generic_load): Use regcache_write_pc instead of write_pc. * monitor.c (monitor_create_inferior, monitor_load): Likewise. * m32r-rom.c (m32r_load, m32r_upload_command): Likewise. * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise. * remote-mips.c (mips_create_inferior, mips_load): Likewise. * solib-darwin.c: Include "regcache.h". * solib-pa64.c: Include "regcache.h". * solib-svr4.c: Include "regcache.h.". * symfile.c: Do not mention read_pc or write_pc in comments. * dink32-rom.c: Likewise. * m32r-rom.c: Likewise. * mips-tdep.c: Likewise. |
||
|
Joel Brobecker
|
bf75638ec1 |
Undo the following change. Not correct, after all:
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
|
||
|
Joel Brobecker
|
37da21bceb |
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
|
||
|
Joel Brobecker
|
7d85a9c0e3 |
Add a target_ops parameter to the to_kill method in struct target_ops.
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
|