MatCat.OpenSource/8sa1-binutils-gdb
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
105,775 Commits 1 Branch 0 Tags 372 MiB
master
Commit Graph

792 Commits

Author SHA1 Message Date
Yao Qi
1bab73830f MIPS: Provide FPU info and decode FCSR in `info float' 
This patch is the V2.  V1 can be found in
https://sourceware.org/ml/gdb-patches/2012-05/msg00938.html
V2 is to address Joel's comment
<https://sourceware.org/ml/gdb-patches/2012-06/msg00289.html> about
keeping dumping floating point registers.  Additionally, command
'info float' prints bits on nan2008 and abs2008.

------------------------------------------------------------------

 The change below provides a MIPS-specific handler for the:

(gdb) info float

command.  It provides information about the FPU type available (if any),
the FPU register width, and decodes the CP1 Floating Point Control and
Status Register (FCSR):

(gdb) print /x $fsr
$1 = 0xff83ffff
(gdb) info float
fpu type: double-precision
reg size: 32 bits
cond    : 0 1 2 3 4 5 6 7
cause   : inexact uflow oflow div0 inval unimp
mask    : inexact uflow oflow div0 inval
flags   : inexact uflow oflow div0 inval
rounding: -inf
flush   : zero

 One point to note about CP1.FCSR are the non-standard Flush-to-Nearest
and Flush-Override bits.  They are not a part of the MIPS architecture and
take two positions reserved for an implementation-dependent use in the
architecture.  They are present in all the FPU implementations made by
MIPS Technologies since the spin-off from SGI.

 I haven't been able to track down a single other MIPS FPU implementation
that would make any use of these bits and they are required to be
hardwired to zero by the architecture specification if unimplemented.
Therefore I think it makes sense to report them in the current way.

 GDB has no guaranteed access to the CP0 Processor Identification (PRId)
register to validate this feature properly and the ID information stored
in the CP1 Floating Point Implementation Register (FIR) is from my
experience not reliable enough (there's no Company ID available there for
once unlike in CP0.PRId and Processor ID is not guaranteed to be unique).

 As a side note we should probably dump CP1.FIR information as well, as
there's useful stuff indicating some FPU features there.  That's material
for another change however.

gdb/

2014-12-18  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-tdep.c (print_fpu_flags): New function.
	(mips_print_float_info): Likewise.
	(mips_gdbarch_init): Install mips_print_float_info as gdbarch
	print_float_info routine.

gdb/testsuite/

2014-12-18  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

	* gdb.base/float.exp: Handle the new output from "info float" on
	MIPS targets.
 2014-12-18 20:47:28 +08:00
Maciej W. Rozycki
f161c17134 MIPS: Define aliases for MSYMBOL_TARGET_FLAG macros 
* mips-tdep.h (MSYMBOL_TARGET_FLAG_MIPS16): New macro.
	(MSYMBOL_TARGET_FLAG_MICROMIPS): Likewise.
	* mips-tdep.c (mips_elf_make_msymbol_special): Use the new
	macros.
	(msymbol_is_mips, msymbol_is_mips16, msymbol_is_micromips):
	Likewise.
 2014-12-12 16:36:10 +00:00
Maciej W. Rozycki
3e29f34a4e MIPS: Keep the ISA bit in compressed code addresses 
1. Background information

The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned.  As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception.  This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.

Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI).  The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.

As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2.  That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.

So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit.  Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.

To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution.  They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.

This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.

A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture.  Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes.  The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.

2. Statement of the problem

To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time.  This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged.  Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.

A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected.  This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.

While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle.  This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).

This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.

This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:

(short *) main

will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.

This is probably best illustrated with a simple real program example.
Let's consider the following simple program:

$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
  return 1;
}

int __attribute__ ((mips16)) bar (void)
{
  return 2;
}

int __attribute__ ((nomips16)) foo32 (void)
{
  return 3;
}

int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;

int
main (void)
{
  return foop ();
}
$

This is plain C with no odd tricks, except from the instruction mode
attributes.  They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.

Let's try it with Linux, so that everyone can repeat this experiment:

$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$

Let's have a look at some interesting symbols:

$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
    55: 00000000     0 FILE    LOCAL  DEFAULT  ABS foobar.c
    66: 0040068c     4 FUNC    GLOBAL DEFAULT [MIPS16]    12 bar
    68: 00410848     4 OBJECT  GLOBAL DEFAULT   21 foo32p
    70: 00410844     4 OBJECT  GLOBAL DEFAULT   21 foop
    78: 00400684     8 FUNC    GLOBAL DEFAULT   12 foo32
    80: 00400680     4 FUNC    GLOBAL DEFAULT [MIPS16]    12 foo
    88: 00410840     4 OBJECT  GLOBAL DEFAULT   21 fooi
$

Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).

So let's try to run and poke at this program with GDB.  I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):

$ ./foobar
$ echo $?
1
$

So far, so good.

$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar

Breakpoint 1, main () at foobar.c:23
23        return foop ();
(gdb)

Yay, it worked!  OK, so let's poke at it:

(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)

A-ha!  Here's the difference and finally the ISA bit!

(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)

And here as well...

(gdb) advance foo
foo () at foobar.c:4
4       }
(gdb) disassemble
Dump of assembler code for function foo:
   0x00400680 <+0>:     jr      ra
   0x00400682 <+2>:     li      v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0  foo () at foobar.c:4
main () at foobar.c:24
24      }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)

So let's be a bit inquisitive...

(gdb) run
Starting program: .../foobar

Breakpoint 1, main () at foobar.c:23
23        return foop ();
(gdb)

Actually we do not like to run foo here at all.  Let's run bar instead!

(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)

Hmm, no ISA bit.  Is it going to work?

(gdb) advance bar
bar () at foobar.c:9
9       }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>:     jr      ra
   0x0040068e <+2>:     li      v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0  bar () at foobar.c:9

Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9       }
(gdb)

Oops!

(gdb) p/x $pc
$12 = 0x40068c
(gdb)

We're still there!

(gdb) continue
Continuing.

Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)

So let's try something else:

(gdb) run
Starting program: .../foobar

Breakpoint 1, main () at foobar.c:23
23        return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4       }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>:     jr      ra
   0x00400682 <+2>:     li      v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0  foo () at foobar.c:4

Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4       }
(gdb) continue
Continuing.

Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)

The same problem!

(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar

Breakpoint 1, main () at foobar.c:23
23        return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14      }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>:     jr      ra
   0x00400688 <+4>:     li      v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0  foo32 () at foobar.c:14
main () at foobar.c:24
24      }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)

That did work though, so it's the ISA bit only!

(gdb) quit

Enough!

That's the tip of the iceberg only though.  So let's rebuild the
executable with some dynamic symbols:

$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
     6: 004009cd     4 FUNC    GLOBAL DEFAULT   12 bar
     8: 00410b88     4 OBJECT  GLOBAL DEFAULT   21 foo32p
     9: 00410b84     4 OBJECT  GLOBAL DEFAULT   21 foop
    15: 004009c4     8 FUNC    GLOBAL DEFAULT   12 foo32
    17: 004009c1     4 FUNC    GLOBAL DEFAULT   12 foo
    25: 00410b80     4 OBJECT  GLOBAL DEFAULT   21 fooi
Symbol table '.symtab' contains 95 entries:
    55: 00000000     0 FILE    LOCAL  DEFAULT  ABS foobar.c
    69: 004009cd     4 FUNC    GLOBAL DEFAULT   12 bar
    71: 00410b88     4 OBJECT  GLOBAL DEFAULT   21 foo32p
    72: 00410b84     4 OBJECT  GLOBAL DEFAULT   21 foop
    79: 004009c4     8 FUNC    GLOBAL DEFAULT   12 foo32
    81: 004009c1     4 FUNC    GLOBAL DEFAULT   12 foo
    89: 00410b80     4 OBJECT  GLOBAL DEFAULT   21 fooi
$

OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm...  What does `objdump' do then:

$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn:     file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l    df *ABS*  00000000              foobar.c
004009cc g     F .text  00000004              0xf0 bar
00410b88 g     O .data  00000004              foo32p
00410b84 g     O .data  00000004              foop
004009c4 g     F .text  00000008              foo32
004009c0 g     F .text  00000004              0xf0 foo
00410b80 g     O .data  00000004              fooi
DYNAMIC SYMBOL TABLE:
004009cc g    DF .text  00000004  Base        0xf0 bar
00410b88 g    DO .data  00000004  Base        foo32p
00410b84 g    DO .data  00000004  Base        foop
004009c4 g    DF .text  00000008  Base        foo32
004009c0 g    DF .text  00000004  Base        0xf0 foo
00410b80 g    DO .data  00000004  Base        fooi
$

Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.

Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:

$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
  Compilation Unit @ offset 0x88:
   Length:        0xbb (32-bit)
   Version:       4
   Abbrev Offset: 62
   Pointer Size:  4
 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
    <94>   DW_AT_producer    : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
    <98>   DW_AT_language    : 1        (ANSI C)
    <99>   DW_AT_name        : (indirect string, offset: 0x190): foobar.c
    <9d>   DW_AT_comp_dir    : (indirect string, offset: 0x225): [...]
    <a1>   DW_AT_ranges      : 0x0
    <a5>   DW_AT_low_pc      : 0x0
    <a9>   DW_AT_stmt_list   : 0x27
 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
    <ae>   DW_AT_external    : 1
    <ae>   DW_AT_name        : foo
    <b2>   DW_AT_decl_file   : 1
    <b3>   DW_AT_decl_line   : 1
    <b4>   DW_AT_prototyped  : 1
    <b4>   DW_AT_type        : <0xc2>
    <b8>   DW_AT_low_pc      : 0x400680
    <bc>   DW_AT_high_pc     : 0x400684
    <c0>   DW_AT_frame_base  : 1 byte block: 9c         (DW_OP_call_frame_cfa)
    <c2>   DW_AT_GNU_all_call_sites: 1
 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
    <c3>   DW_AT_byte_size   : 4
    <c4>   DW_AT_encoding    : 5        (signed)
    <c5>   DW_AT_name        : int
 <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
    <ca>   DW_AT_external    : 1
    <ca>   DW_AT_name        : (indirect string, offset: 0x18a): foo32
    <ce>   DW_AT_decl_file   : 1
    <cf>   DW_AT_decl_line   : 11
    <d0>   DW_AT_prototyped  : 1
    <d0>   DW_AT_type        : <0xc2>
    <d4>   DW_AT_low_pc      : 0x400684
    <d8>   DW_AT_high_pc     : 0x40068c
    <dc>   DW_AT_frame_base  : 1 byte block: 9c         (DW_OP_call_frame_cfa)
    <de>   DW_AT_GNU_all_call_sites: 1
 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
    <df>   DW_AT_external    : 1
    <df>   DW_AT_name        : bar
    <e3>   DW_AT_decl_file   : 1
    <e4>   DW_AT_decl_line   : 6
    <e5>   DW_AT_prototyped  : 1
    <e5>   DW_AT_type        : <0xc2>
    <e9>   DW_AT_low_pc      : 0x40068c
    <ed>   DW_AT_high_pc     : 0x400690
    <f1>   DW_AT_frame_base  : 1 byte block: 9c         (DW_OP_call_frame_cfa)
    <f3>   DW_AT_GNU_all_call_sites: 1
 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
    <f4>   DW_AT_external    : 1
    <f4>   DW_AT_name        : (indirect string, offset: 0x199): main
    <f8>   DW_AT_decl_file   : 1
    <f9>   DW_AT_decl_line   : 21
    <fa>   DW_AT_prototyped  : 1
    <fa>   DW_AT_type        : <0xc2>
    <fe>   DW_AT_low_pc      : 0x400490
    <102>   DW_AT_high_pc     : 0x4004a4
    <106>   DW_AT_frame_base  : 1 byte block: 9c        (DW_OP_call_frame_cfa)
    <108>   DW_AT_GNU_all_tail_call_sites: 1
[...]
$

-- no sign of the ISA bit anywhere -- frame info:

$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:

00000000 0000000c ffffffff CIE
  Version:               1
  Augmentation:          ""
  Code alignment factor: 1
  Data alignment factor: -4
  Return address column: 31

  DW_CFA_def_cfa_register: r29
  DW_CFA_nop

00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684

00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c

00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690

00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
  DW_CFA_advance_loc: 6 to 00400496
  DW_CFA_def_cfa_offset: 32
  DW_CFA_offset: r31 at cfa-4
  DW_CFA_advance_loc: 6 to 0040049c
  DW_CFA_restore: r31
  DW_CFA_def_cfa_offset: 0
  DW_CFA_nop
  DW_CFA_nop
  DW_CFA_nop
[...]
$

-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):

$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:

    Offset   Begin    End
    00000000 00400680 00400690
    00000000 00400490 004004a4
    00000000 <End of list>

$

-- no sign of the ISA bit anywhere -- line info:

$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
  Offset:                      0x27
  Length:                      78
  DWARF Version:               2
  Prologue Length:             31
  Minimum Instruction Length:  1
  Initial value of 'is_stmt':  1
  Line Base:                   -5
  Line Range:                  14
  Opcode Base:                 13

 Opcodes:
  Opcode 1 has 0 args
  Opcode 2 has 1 args
  Opcode 3 has 1 args
  Opcode 4 has 1 args
  Opcode 5 has 1 args
  Opcode 6 has 0 args
  Opcode 7 has 0 args
  Opcode 8 has 0 args
  Opcode 9 has 1 args
  Opcode 10 has 0 args
  Opcode 11 has 0 args
  Opcode 12 has 1 args

 The Directory Table is empty.

 The File Name Table:
  Entry Dir     Time    Size    Name
  1     0       0       0       foobar.c

 Line Number Statements:
  Extended opcode 2: set Address to 0x400681
  Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
  Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
  Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
  Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
  Advance Line by -7 to 7
  Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
  Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
  Advance PC by 3 to 0x400690
  Extended opcode 1: End of Sequence

  Extended opcode 2: set Address to 0x400491
  Advance Line by 21 to 22
  Copy
  Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
  Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
  Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
  Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
  Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
  Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
  Advance PC by 7 to 0x4004a4
  Extended opcode 1: End of Sequence
[...]

-- a-ha, the ISA bit is there!  However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:

00019630 <__libc_init_first>:
   19630:       e8a0            jrc     ra
   19632:       6500            nop

00019634 <_init>:
   19634:       f000 6a11       li      v0,17
   19638:       f7d8 0b08       la      v1,15e00 <_DYNAMIC+0x15c54>
   1963c:       f400 3240       sll     v0,16
   19640:       e269            addu    v0,v1
   19642:       659a            move    gp,v0
   19644:       64f6            save    48,ra,s0-s1
   19646:       671c            move    s0,gp
   19648:       d204            sw      v0,16(sp)
   1964a:       f352 984c       lw      v0,-27828(s0)
   1964e:       6724            move    s1,a0

and the corresponding DWARF-2 line info:

 Line Number Statements:
  Extended opcode 2: set Address to 0x19631
  Advance Line by 44 to 45
  Copy
  Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
  Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
  Advance PC by constant 17 to 0x19646
  Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
  Advance Line by -6 to 53
  Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
  Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
  Advance Line by -6 to 53
  Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53

-- see that "Advance PC by constant 17" there?  It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all.  For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?

3. Solution:

I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.

In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.

All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down.  This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.

Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places.  Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.

I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB.  I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.

Here's the resulting change.  It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed.  The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.

With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).

4. Results obtained

The change fixes the example above -- to repeat only the crucial steps:

(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar

Breakpoint 1, main () at foobar.c:23
23        return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9       }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>:     jr      ra
   0x0040068f <+2>:     li      v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0  bar () at foobar.c:9
main () at foobar.c:24
24      }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)

-- excellent!

The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:

                === gdb Summary ===

# of expected passes            14299
# of unexpected failures        187
# of expected failures          56
# of known failures             58
# of unresolved testcases       11
# of untested testcases         52
# of unsupported tests          174

MIPS16:

                === gdb Summary ===

# of expected passes            14298
# of unexpected failures        187
# of unexpected successes       2
# of expected failures          54
# of known failures             58
# of unresolved testcases       12
# of untested testcases         52
# of unsupported tests          174

microMIPS:

                === gdb Summary ===

# of expected passes            14149
# of unexpected failures        201
# of unexpected successes       2
# of expected failures          54
# of known failures             58
# of unresolved testcases       7
# of untested testcases         53
# of unsupported tests          175

2014-12-12  Maciej W. Rozycki  <macro@codesourcery.com>
            Maciej W. Rozycki  <macro@mips.com>
            Pedro Alves  <pedro@codesourcery.com>

	gdb/
	* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
	remove `predefault' and `invalid_p' initializers.
	(make_symbol_special): New architecture method.
	(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
	(objfile, symbol): New declarations.
	* arch-utils.h (default_elf_make_msymbol_special): Remove
	prototype.
	(default_make_symbol_special): New prototype.
	(default_adjust_dwarf2_addr): Likewise.
	(default_adjust_dwarf2_line): Likewise.
	* mips-tdep.h (mips_unmake_compact_addr): New prototype.
	* arch-utils.c (default_elf_make_msymbol_special): Remove
	function.
	(default_make_symbol_special): New function.
	(default_adjust_dwarf2_addr): Likewise.
	(default_adjust_dwarf2_line): Likewise.
	* dwarf2-frame.c (decode_frame_entry_1): Call
	`gdbarch_adjust_dwarf2_addr'.
	* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
	* dwarf2read.c (create_addrmap_from_index): Likewise.
	(process_psymtab_comp_unit_reader): Likewise.
	(add_partial_symbol): Likewise.
	(add_partial_subprogram): Likewise.
	(process_full_comp_unit): Likewise.
	(read_file_scope): Likewise.
	(read_func_scope): Likewise.  Call `gdbarch_make_symbol_special'.
	(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
	(read_call_site_scope): Likewise.
	(dwarf2_ranges_read): Likewise.
	(dwarf2_record_block_ranges): Likewise.
	(read_attribute_value): Likewise.
	(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
	(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
	* elfread.c (elf_symtab_read): Don't call
	`gdbarch_elf_make_msymbol_special' if unset.
	* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
	the ISA bit from the PC.
	* mips-tdep.c (mips_unmake_compact_addr): New function.
	(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
	address appropriately.
	(mips_make_symbol_special): New function.
	(mips_pc_is_mips): Set the ISA bit before symbol lookup.
	(mips_pc_is_mips16): Likewise.
	(mips_pc_is_micromips): Likewise.
	(mips_pc_isa): Likewise.
	(mips_adjust_dwarf2_addr): New function.
	(mips_adjust_dwarf2_line): Likewise.
	(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
	(mips_addr_bits_remove): Likewise.
	(mips_skip_trampoline_code): Likewise.
	(mips_write_pc): Don't set the ISA bit.
	(mips_eabi_push_dummy_call): Likewise.
	(mips_o64_push_dummy_call): Likewise.
	(mips_gdbarch_init): Install `mips_make_symbol_special',
	`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
	handlers.
	* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
	target-specific symbol address adjustments.
	* gdbarch.h: Regenerate.
	* gdbarch.c: Regenerate.

2014-12-12  Maciej W. Rozycki  <macro@codesourcery.com>

	gdb/testsuite/
	* gdb.base/func-ptrs.c: New file.
	* gdb.base/func-ptrs.exp: New file.
 2014-12-12 13:49:06 +00:00
Maciej W. Rozycki
484933d11f MIPS: Rewrite `add_offset_16' to match its name 
A helper function called `add_offset_16' is used by
`extended_mips16_next_pc' to calculate branch destinations.  Weirdly
enough the helper does not do what the name suggests and rather than
doing its work for a 16-bit immediate branch offset it makes its
calculations on a 26-bit immediate target used by JAL and JALX
instructions.  Furthermore the JAL/JALX calculation is only needed once
by `extended_mips16_next_pc' while a 16-bit branch offset calculation
is made inline several times across `extended_mips16_next_pc'.

This change therefore replaces the contents of `add_offset_16' with the
16-bit branch offset calculation and updates `extended_mips16_next_pc'
accordingly.

	* mips-tdep.c (add_offset_16): Rewrite to implement what the
	name implies.
	(extended_mips16_next_pc): Update accordingly.
 2014-10-05 23:37:53 +01:00
Maciej W. Rozycki
ab50adb6a6 MIPS: Correct heuristic prologue termination conditions 
This change addresses a regression in gdb.dwarf2/dw2-skip-prologue.exp
across MIPS16 multilibs:

(gdb) file .../gdb.dwarf2/dw2-skip-prologue
Reading symbols from .../gdb.d/gdb.dwarf2/dw2-skip-prologue...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
warning: Breakpoint address adjusted from 0x00400725 to 0x00400721.
Breakpoint 1 at 0x400721
(gdb) set remotetimeout 5
(gdb) kill
The program is not being run.
(gdb)
[...]
target remote ...:2345
Reading symbols from .../mips16/lib/ld.so.1...done.
warning: Breakpoint address adjusted from 0x00400725 to 0x00400721.
warning: Breakpoint address adjusted from 0x00400725 to 0x00400721.
0x2aaa8e81 in __start () from .../mips16/lib/ld.so.1
(gdb) continue
Continuing.
warning: Breakpoint address adjusted from 0x00400725 to 0x00400721.
warning: Breakpoint 1 address previously adjusted from 0x00400725 to
0x00400721.
Breakpoint 1, 0x00400721 in main ()
(gdb) break func
Breakpoint 2 at 0x4006a1: func. (2 locations)
(gdb) continue
Continuing.
warning: GDB can't find the start of the function at 0x4006dd.

    GDB is unable to find the start of the function at 0x4006dd
and thus can't determine the size of that function's stack frame.
This means that GDB may be unable to access that stack frame, or
the frames below it.
    This problem is most likely caused by an invalid program counter or
stack pointer.
    However, if you think GDB should simply search farther back
from 0x4006dd for code which looks like the beginning of a
function, you can increase the range of the search using the `set
heuristic-fence-post' command.

Program received signal SIGBUS, Bus error.
0x0040072b in main ()
(gdb) FAIL: gdb.dwarf2/dw2-skip-prologue.exp: continue to breakpoint: func

-- notice the breakpoint adjustment messages that are already a bad
sign.  These happen when a breakpoint is requested in a branch delay
slot and are not supposed to happen unless explicitly requested with an
address pointing to a branch delay slot instruction.  No symbol or line
debug information is supposed to direct GDB to place a breakpoint in a
delay slot.

Here's how `main' looks like:

00400718 <main>:
  400718:	64f5      	save	40,ra,s0-s1
  40071a:	1a00 01a8 	jal	4006a0 <func>
  40071e:	0104      	addiu	s1,sp,16
  400720:	1a00 01b7 	jal	4006dc <func+0x3c>
  400724:	6702      	move	s0,v0
  400726:	e049      	addu	v0,s0,v0
  400728:	65b9      	move	sp,s1
  40072a:	6473      	restore	24,ra,s0-s1
  40072c:	e8a0      	jrc	ra
  40072e:	6500      	nop

-- so 0x400725 is the MIPS16 instruction address of the first MOVE
instruction seen above, in a delay slot of the preceding JAL instruction
indeed.  This test case arranges for `main' to have no debug information
so it is one of the heuristic prologue scanners, `mips16_scan_prologue'
specifically in this case, that is responsible for finding the right
location for the breakpoint to place.

In this case the prologue really ends with the ADDIU instruction,
reordered into the delay slot of the first JAL instruction.  Of course
we can't place the breakpoint for `main' after it as by doing so we'll
let `func' to be called before hitting this breakpoint.  So the
breakpoint has to go at the JAL instruction instead, or 0x40071b.

To make a general case out of it we must never consider any jump or
branch instruction to be a part of a function's prologue.  In the
presence of a jump or branch at the beginning of a function the furthest
instruction examined for the purpose of constructing frame information
can be one in the delay slot of that jump or branch if present, and
otherwise -- that is when the jump or branch is compact and has no delay
slot -- the instruction immediately preceding the jump or branch.

This change implements that approach across prologue scanners for the
three instruction ISAs.  In implementing it I have factored out code
from the existing `*_instruction_has_delay_slot' handlers to be shared
and a side effect for the microMIPS implementation is it now always
fetches the second 16-bit halfword of 32-bit instructions even if it
eventually is not going to be needed.  I think it's an acceptable
tradeoff for the purpose of code sharing.

To make things more consistent I also carried logic from
`micromips_scan_prologue' over to the other two scanners to accept (and
ignore) a single non-prologue non-control transfer instruction reordered
by the compiler into the prologue.  While doing this I simplified the
exit path from the scan loop such that `end_prologue_addr' is set only
once.  This made some concerns expressed in comments no longer
applicable, although even before they were not valid.

I have not fixed the logic around `load_immediate_bytes' in
`mips32_scan_prologue' though, it remains broken, although I took care
not to break it more.  An approach similar to one taken for handling
larger stack adjustments in `micromips_scan_prologue' will have to be
eventually implemented here.

For regression testing I used my usual choice of the mips-linux-gnu
target and the following multilibs:

-EB
-EB -msoft-float
-EB -mips16
-EB -mips16 -msoft-float
-EB -mmicromips
-EB -mmicromips -msoft-float
-EB -mabi=n32
-EB -mabi=n32 -msoft-float
-EB -mabi=64
-EB -mabi=64 -msoft-float

and the -EL variants of same.

That removed gdb.dwarf2/dw2-skip-prologue.exp failures across MIPS16
multilibs, the test log now shows:

(gdb) file .../gdb.dwarf2/dw2-skip-prologue
Reading symbols from .../gdb.d/gdb.dwarf2/dw2-skip-prologue...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
Breakpoint 1 at 0x40071b
(gdb) set remotetimeout 5
(gdb) kill
The program is not being run.
(gdb)
[...]
target remote ...:2345
Reading symbols from .../mips16/lib/ld.so.1...done.
0x2aaa8e81 in __start () from .../mips16/lib/ld.so.1
(gdb) continue
Continuing.

Breakpoint 1, 0x0040071b in main ()
(gdb) break func
Breakpoint 2 at 0x4006a1: func. (2 locations)
(gdb) continue
Continuing.

Breakpoint 2, func (param=0) at main.c:5
5	   This program is free software; you can redistribute it and/or modify
(gdb) PASS: gdb.dwarf2/dw2-skip-prologue.exp: continue to breakpoint: func

-- so things look like intended.

That also did regress, again across MIPS16 multilibs, another test case,
gdb.base/step-symless.exp:

(gdb) file .../gdb.d/gdb.base/step-symless
Reading symbols from .../gdb.base/step-symless...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
Breakpoint 1 at 0x4006d3
(gdb) set remotetimeout 5
(gdb) kill
The program is not being run.
(gdb)
[...]
target remote ...:2345
Reading symbols from .../mips16/lib/ld.so.1...done.
0x2aaa8e81 in __start () from .../mips16/lib/ld.so.1
(gdb) continue
Continuing.

Breakpoint 1, 0x004006d3 in main ()
(gdb) break symful
Breakpoint 2 at 0x4006a5
(gdb) step
Single stepping until exit from function main,
which has no line number information.
warning: GDB can't find the start of the function at 0x4006b9.

    GDB is unable to find the start of the function at 0x4006b9
and thus can't determine the size of that function's stack frame.
This means that GDB may be unable to access that stack frame, or
the frames below it.
    This problem is most likely caused by an invalid program counter or
stack pointer.
    However, if you think GDB should simply search farther back
from 0x4006b9 for code which looks like the beginning of a
function, you can increase the range of the search using the `set
heuristic-fence-post' command.
0x004006b9 in ?? ()
(gdb) FAIL: gdb.base/step-symless.exp: step

-- but that is actually a good sign.  Here `main', again, has no debug
information and code involved looks like:

004006a0 <symful>:
  4006a0:	6491      	save	8,s1
  4006a2:	673d      	move	s1,sp
  4006a4:	b204      	lw	v0,4006b4 <symful+0x14>
  4006a6:	9a40      	lw	v0,0(v0)
  4006a8:	4261      	addiu	v1,v0,1
  4006aa:	b203      	lw	v0,4006b4 <symful+0x14>
  4006ac:	da60      	sw	v1,0(v0)
  4006ae:	65b9      	move	sp,s1
  4006b0:	6411      	restore	8,s1
  4006b2:	e8a0      	jrc	ra
  4006b4:	0041      	addiu	s0,sp,260
  4006b6:	0860      	la	s0,400834 <__libc_start_main@mips16plt+0x54>
  4006b8:	6491      	save	8,s1
  4006ba:	673d      	move	s1,sp
  4006bc:	b204      	lw	v0,4006cc <symful+0x2c>
  4006be:	9a40      	lw	v0,0(v0)
  4006c0:	4261      	addiu	v1,v0,1
  4006c2:	b203      	lw	v0,4006cc <symful+0x2c>
  4006c4:	da60      	sw	v1,0(v0)
  4006c6:	65b9      	move	sp,s1
  4006c8:	6411      	restore	8,s1
  4006ca:	e8a0      	jrc	ra
  4006cc:	0041      	addiu	s0,sp,260
  4006ce:	0860      	la	s0,40084c <__libc_start_main@mips16plt+0x6c>

004006d0 <main>:
  4006d0:	64d4      	save	32,ra,s1
  4006d2:	1a00 01ae 	jal	4006b8 <symful+0x18>
  4006d6:	0104      	addiu	s1,sp,16
  4006d8:	1a00 01a8 	jal	4006a0 <symful>
  4006dc:	6500      	nop
  4006de:	6740      	move	v0,zero
  4006e0:	65b9      	move	sp,s1
  4006e2:	6452      	restore	16,ra,s1
  4006e4:	e8a0      	jrc	ra
  4006e6:	6500      	nop
  4006e8:	6500      	nop
  4006ea:	6500      	nop
  4006ec:	6500      	nop
  4006ee:	6500      	nop

-- and the original log:

(gdb) file .../gdb.base/step-symless
Reading symbols from .../gdb.base/step-symless...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
warning: Breakpoint address adjusted from 0x004006dd to 0x004006d9.
Breakpoint 1 at 0x4006d9
(gdb) set remotetimeout 5
(gdb) kill
The program is not being run.
(gdb)
[...]
target remote ...:2345
Reading symbols from .../mips16/lib/ld.so.1...done.
warning: Breakpoint address adjusted from 0x004006dd to 0x004006d9.
warning: Breakpoint address adjusted from 0x004006dd to 0x004006d9.
0x2aaa8e81 in __start () from .../mips16/lib/ld.so.1
(gdb) continue
Continuing.
warning: Breakpoint address adjusted from 0x004006dd to 0x004006d9.
warning: Breakpoint 1 address previously adjusted from 0x004006dd to
0x004006d9.
Breakpoint 1, 0x004006d9 in main ()
(gdb) break symful
Breakpoint 2 at 0x4006a5
(gdb) step
Single stepping until exit from function main,
which has no line number information.

Breakpoint 2, 0x004006a5 in symful ()
(gdb) PASS: gdb.base/step-symless.exp: step

So the breakpoint at `main' was actually set at an instruction after the
call to `symful+0x18' aka `symless' and the test only passed because
single-stepping through `symless' wasn't actually done at all.  With
this change in place this test fails for MIPS16 multilibs consistently
with all the other multilibs where it already failed in this manner
previously.

	* mips-tdep.c (mips16_instruction_is_compact_branch): New
	function.
	(micromips_instruction_is_compact_branch): Likewise.
	(mips16_scan_prologue): Terminate scanning upon seeing a branch
	or a compact jump, reaching a jump delay slot, or seeing a
	second non-prologue instruction.
	(micromips_scan_prologue): Also terminate scanning upon seeing a
	compact branch or jump, or reaching a branch or jump delay slot.
	(mips32_scan_prologue): Terminate scanning upon reaching a branch
	or jump delay slot, or seeing a second non-prologue instruction.
	(mips32_instruction_has_delay_slot): Retain instruction
	examination code only, update arguments accordingly and move
	instruction fetch pieces to...
	(mips32_insn_at_pc_has_delay_slot): ... this new function.
	(micromips_instruction_has_delay_slot): Likewise and to...
	(micromips_insn_at_pc_has_delay_slot): ... this new function.
	(mips16_instruction_has_delay_slot): Likewise and to...
	(mips16_insn_at_pc_has_delay_slot): ... this new function.
	(mips_single_step_through_delay): Update accordingly.
	(mips_adjust_breakpoint_address): Likewise.
 2014-10-05 23:20:10 +01:00
Maciej W. Rozycki
ae79065284 MIPS: Correct MUSTBE32 interpretation in delay slot handling 
This change addresses `micromips_instruction_has_delay_slot' and
`mips16_instruction_has_delay_slot' that both incorrectly interpret
their MUSTBE32 argument.  Their callers assume that when the flag is
clear these functions will return 1 when any non-compact jump or branch
instruction is present at ADDR, while in fact they will only return 1
for 16-bit such instructions only.  This change makes the implementation
match the expectations.

	* mips-tdep.c (micromips_instruction_has_delay_slot): When
	!mustbe32 also return 1 for 32-bit instructions.
	(mips16_instruction_has_delay_slot): Likewise.  Add an
	explanatory comment.
 2014-10-05 21:50:47 +01:00
Pedro Alves
9a0dc9e369 Handle partially optimized out values similarly to unavailable values 
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:

 2014-07-22  Pedro Alves  <palves@redhat.com>

 	* value.c (allocate_optimized_out_value): Don't mark value as
 	non-lazy.

The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.

Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>".  Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.

So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents.  That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.

Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.

This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents.  It does now, and because of
that it's been renamed to value_contents_eq.

A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.

gdb/
	PR symtab/14604
	PR symtab/14605
	* ada-lang.c (coerce_unspec_val_to_type): Use
	value_contents_copy_raw.
	* ada-valprint.c (val_print_packed_array_elements): Adjust.
	* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
	* cp-valprint.c (cp_print_value_fields): Let the common printing
	code handle optimized out values.
	(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
	* d-valprint.c (dynamic_array_type): Use
	value_bits_any_optimized_out.
	* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
	check_any_valid fields.
	(check_pieced_value_bits): Delete and inline ...
	(check_pieced_synthetic_pointer): ... here.
	(check_pieced_value_validity): Delete.
	(check_pieced_value_invalid): Delete.
	(pieced_value_funcs): Remove check_validity and check_any_valid
	fields.
	(read_pieced_value): Use mark_value_bits_optimized_out.
	(write_pieced_value): Switch to use
	mark_value_bytes_optimized_out.
	(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
	of assuming the whole value is optimized out.
	* findvar.c (read_frame_register_value): Remove special handling
	of optimized out registers.
	(value_from_register): Use mark_value_bytes_optimized_out.
	* frame-unwind.c (frame_unwind_got_optimized): Use
	mark_value_bytes_optimized_out.
	* jv-valprint.c (java_value_print): Adjust.
	(java_print_value_fields): Let the common printing code handle
	optimized out values.
	* mips-tdep.c (mips_print_register): Remove special handling of
	optimized out registers.
	* opencl-lang.c (lval_func_check_validity): Delete.
	(lval_func_check_any_valid): Delete.
	(opencl_value_funcs): Remove check_validity and check_any_valid
	fields.
	* p-valprint.c (pascal_object_print_value_fields): Let the common
	printing code handle optimized out values.
	* stack.c (read_frame_arg): Remove special handling of optimized
	out values.  Fetch both VAL and ENTRYVAL before comparing
	contents.  Adjust to value_available_contents_eq rename.
	* valprint.c (valprint_check_validity)
	(val_print_scalar_formatted): Use value_bits_any_optimized_out.
	(val_print_array_elements): Adjust.
	* value.c (struct value) <optimized_out>: Now a VEC(range_s).
	(value_bits_any_optimized_out): New function.
	(value_entirely_covered_by_range_vector): New function, factored
	out from value_entirely_unavailable.
	(value_entirely_unavailable): Reimplement.
	(value_entirely_optimized_out): New function.
	(insert_into_bit_range_vector): New function, factored out from
	mark_value_bits_unavailable.
	(mark_value_bits_unavailable): Reimplement.
	(struct ranges_and_idx): New struct.
	(find_first_range_overlap_and_match): New function, factored out
	from value_available_contents_bits_eq.
	(value_available_contents_bits_eq): Rename to ...
	(value_contents_bits_eq): ... this.  Check both unavailable
	contents and optimized out contents.
	(value_available_contents_eq): Rename to ...
	(value_contents_eq): ... this.
	(allocate_value_lazy): Remove reference to the old optimized_out
	boolean.
	(allocate_optimized_out_value): Use
	mark_value_bytes_optimized_out.
	(require_not_optimized_out): Adjust to check whether the
	optimized_out vec is empty.
	(ranges_copy_adjusted): New function, factored out from
	value_contents_copy_raw.
	(value_contents_copy_raw): Also copy the optimized out ranges.
	Assert the destination ranges aren't optimized out.
	(value_contents_copy): Update comment, remove call to
	require_not_optimized_out.
	(value_contents_equal): Adjust to check whether the optimized_out
	vec is empty.
	(set_value_optimized_out, value_optimized_out_const): Delete.
	(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
	New functions.
	(value_entirely_optimized_out, value_bits_valid): Delete.
	(value_copy): Take a VEC copy of the 'optimized_out' field.
	(value_primitive_field): Remove special handling of optimized out.
	(value_fetch_lazy): Assert that lazy values have no unavailable
	regions.  Use value_bits_any_optimized_out.  Remove some special
	handling for optimized out values.
	* value.h: Add intro comment about <optimized out> and
	<unavailable>.
	(struct lval_funcs): Remove check_validity and check_any_valid
	fields.
	(set_value_optimized_out, value_optimized_out_const): Remove.
	(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
	New declarations.
	(value_bits_any_optimized_out): New declaration.
	(value_bits_valid): Delete declaration.
	(value_available_contents_eq): Rename to ...
	(value_contents_eq): ... this, and extend comments.

gdb/testsuite/
	PR symtab/14604
	PR symtab/14605
	* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
	gdb_test.
 2014-08-20 00:07:40 +01:00
Gary Benson
6d3d12ebef Include string.h in common-defs.h 
This commit includes string.h in common-defs.h and removes all other
inclusions.

gdb/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* common/common-defs.h: Include string.h.
	* aarch64-tdep.c: Do not include string.h.
	* ada-exp.y: Likewise.
	* ada-lang.c: Likewise.
	* ada-lex.l: Likewise.
	* ada-typeprint.c: Likewise.
	* ada-valprint.c: Likewise.
	* aix-thread.c: Likewise.
	* alpha-linux-tdep.c: Likewise.
	* alpha-mdebug-tdep.c: Likewise.
	* alpha-nat.c: Likewise.
	* alpha-osf1-tdep.c: Likewise.
	* alpha-tdep.c: Likewise.
	* alphanbsd-tdep.c: Likewise.
	* amd64-dicos-tdep.c: Likewise.
	* amd64-linux-tdep.c: Likewise.
	* amd64-nat.c: Likewise.
	* amd64-sol2-tdep.c: Likewise.
	* amd64fbsd-tdep.c: Likewise.
	* amd64obsd-tdep.c: Likewise.
	* arch-utils.c: Likewise.
	* arm-linux-nat.c: Likewise.
	* arm-linux-tdep.c: Likewise.
	* arm-tdep.c: Likewise.
	* arm-wince-tdep.c: Likewise.
	* armbsd-tdep.c: Likewise.
	* armnbsd-nat.c: Likewise.
	* armnbsd-tdep.c: Likewise.
	* armobsd-tdep.c: Likewise.
	* avr-tdep.c: Likewise.
	* ax-gdb.c: Likewise.
	* ax-general.c: Likewise.
	* bcache.c: Likewise.
	* bfin-tdep.c: Likewise.
	* breakpoint.c: Likewise.
	* build-id.c: Likewise.
	* buildsym.c: Likewise.
	* c-exp.y: Likewise.
	* c-lang.c: Likewise.
	* c-typeprint.c: Likewise.
	* c-valprint.c: Likewise.
	* charset.c: Likewise.
	* cli-out.c: Likewise.
	* cli/cli-cmds.c: Likewise.
	* cli/cli-decode.c: Likewise.
	* cli/cli-dump.c: Likewise.
	* cli/cli-interp.c: Likewise.
	* cli/cli-logging.c: Likewise.
	* cli/cli-script.c: Likewise.
	* cli/cli-setshow.c: Likewise.
	* cli/cli-utils.c: Likewise.
	* coffread.c: Likewise.
	* common/agent.c: Likewise.
	* common/buffer.c: Likewise.
	* common/buffer.h: Likewise.
	* common/common-utils.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/format.c: Likewise.
	* common/print-utils.c: Likewise.
	* common/rsp-low.c: Likewise.
	* common/signals.c: Likewise.
	* common/vec.h: Likewise.
	* common/xml-utils.c: Likewise.
	* core-regset.c: Likewise.
	* corefile.c: Likewise.
	* corelow.c: Likewise.
	* cp-abi.c: Likewise.
	* cp-name-parser.y: Likewise.
	* cp-support.c: Likewise.
	* cp-valprint.c: Likewise.
	* cris-tdep.c: Likewise.
	* d-exp.y: Likewise.
	* darwin-nat.c: Likewise.
	* dbxread.c: Likewise.
	* dcache.c: Likewise.
	* demangle.c: Likewise.
	* dicos-tdep.c: Likewise.
	* disasm.c: Likewise.
	* doublest.c: Likewise.
	* dsrec.c: Likewise.
	* dummy-frame.c: Likewise.
	* dwarf2-frame.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* elfread.c: Likewise.
	* environ.c: Likewise.
	* eval.c: Likewise.
	* event-loop.c: Likewise.
	* exceptions.c: Likewise.
	* exec.c: Likewise.
	* expprint.c: Likewise.
	* f-exp.y: Likewise.
	* f-lang.c: Likewise.
	* f-typeprint.c: Likewise.
	* f-valprint.c: Likewise.
	* fbsd-nat.c: Likewise.
	* findcmd.c: Likewise.
	* findvar.c: Likewise.
	* fork-child.c: Likewise.
	* frame.c: Likewise.
	* frv-linux-tdep.c: Likewise.
	* frv-tdep.c: Likewise.
	* gdb.c: Likewise.
	* gdb_bfd.c: Likewise.
	* gdbarch.c: Likewise.
	* gdbarch.sh: Likewise.
	* gdbtypes.c: Likewise.
	* gnu-nat.c: Likewise.
	* gnu-v2-abi.c: Likewise.
	* gnu-v3-abi.c: Likewise.
	* go-exp.y: Likewise.
	* go-lang.c: Likewise.
	* go32-nat.c: Likewise.
	* guile/guile.c: Likewise.
	* guile/scm-auto-load.c: Likewise.
	* hppa-hpux-tdep.c: Likewise.
	* hppa-linux-nat.c: Likewise.
	* hppanbsd-tdep.c: Likewise.
	* hppaobsd-tdep.c: Likewise.
	* i386-cygwin-tdep.c: Likewise.
	* i386-dicos-tdep.c: Likewise.
	* i386-linux-tdep.c: Likewise.
	* i386-nto-tdep.c: Likewise.
	* i386-sol2-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* i386bsd-tdep.c: Likewise.
	* i386gnu-nat.c: Likewise.
	* i386nbsd-tdep.c: Likewise.
	* i386obsd-tdep.c: Likewise.
	* i387-tdep.c: Likewise.
	* ia64-libunwind-tdep.c: Likewise.
	* ia64-linux-nat.c: Likewise.
	* inf-child.c: Likewise.
	* inf-ptrace.c: Likewise.
	* inf-ttrace.c: Likewise.
	* infcall.c: Likewise.
	* infcmd.c: Likewise.
	* inflow.c: Likewise.
	* infrun.c: Likewise.
	* interps.c: Likewise.
	* iq2000-tdep.c: Likewise.
	* irix5-nat.c: Likewise.
	* jv-exp.y: Likewise.
	* jv-lang.c: Likewise.
	* jv-typeprint.c: Likewise.
	* jv-valprint.c: Likewise.
	* language.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Likewise.
	* lm32-tdep.c: Likewise.
	* m2-exp.y: Likewise.
	* m2-typeprint.c: Likewise.
	* m32c-tdep.c: Likewise.
	* m32r-linux-nat.c: Likewise.
	* m32r-linux-tdep.c: Likewise.
	* m32r-rom.c: Likewise.
	* m32r-tdep.c: Likewise.
	* m68hc11-tdep.c: Likewise.
	* m68k-tdep.c: Likewise.
	* m68kbsd-tdep.c: Likewise.
	* m68klinux-nat.c: Likewise.
	* m68klinux-tdep.c: Likewise.
	* m88k-tdep.c: Likewise.
	* machoread.c: Likewise.
	* macrocmd.c: Likewise.
	* main.c: Likewise.
	* mdebugread.c: Likewise.
	* mem-break.c: Likewise.
	* memattr.c: Likewise.
	* memory-map.c: Likewise.
	* mep-tdep.c: Likewise.
	* mi/mi-cmd-break.c: Likewise.
	* mi/mi-cmd-disas.c: Likewise.
	* mi/mi-cmd-env.c: Likewise.
	* mi/mi-cmd-stack.c: Likewise.
	* mi/mi-cmd-var.c: Likewise.
	* mi/mi-cmds.c: Likewise.
	* mi/mi-console.c: Likewise.
	* mi/mi-getopt.c: Likewise.
	* mi/mi-interp.c: Likewise.
	* mi/mi-main.c: Likewise.
	* mi/mi-parse.c: Likewise.
	* microblaze-rom.c: Likewise.
	* microblaze-tdep.c: Likewise.
	* mingw-hdep.c: Likewise.
	* minidebug.c: Likewise.
	* minsyms.c: Likewise.
	* mips-irix-tdep.c: Likewise.
	* mips-linux-tdep.c: Likewise.
	* mips-tdep.c: Likewise.
	* mips64obsd-tdep.c: Likewise.
	* mipsnbsd-tdep.c: Likewise.
	* mipsread.c: Likewise.
	* mn10300-linux-tdep.c: Likewise.
	* mn10300-tdep.c: Likewise.
	* monitor.c: Likewise.
	* moxie-tdep.c: Likewise.
	* mt-tdep.c: Likewise.
	* nat/linux-btrace.c: Likewise.
	* nat/linux-osdata.c: Likewise.
	* nat/linux-procfs.c: Likewise.
	* nat/linux-ptrace.c: Likewise.
	* nat/linux-waitpid.c: Likewise.
	* nbsd-tdep.c: Likewise.
	* nios2-linux-tdep.c: Likewise.
	* nto-procfs.c: Likewise.
	* nto-tdep.c: Likewise.
	* objc-lang.c: Likewise.
	* objfiles.c: Likewise.
	* opencl-lang.c: Likewise.
	* osabi.c: Likewise.
	* osdata.c: Likewise.
	* p-exp.y: Likewise.
	* p-lang.c: Likewise.
	* p-typeprint.c: Likewise.
	* parse.c: Likewise.
	* posix-hdep.c: Likewise.
	* ppc-linux-nat.c: Likewise.
	* ppc-sysv-tdep.c: Likewise.
	* ppcfbsd-tdep.c: Likewise.
	* ppcnbsd-tdep.c: Likewise.
	* ppcobsd-tdep.c: Likewise.
	* printcmd.c: Likewise.
	* procfs.c: Likewise.
	* prologue-value.c: Likewise.
	* python/py-auto-load.c: Likewise.
	* python/py-gdb-readline.c: Likewise.
	* ravenscar-thread.c: Likewise.
	* regcache.c: Likewise.
	* registry.c: Likewise.
	* remote-fileio.c: Likewise.
	* remote-m32r-sdi.c: Likewise.
	* remote-mips.c: Likewise.
	* remote-notif.c: Likewise.
	* remote-sim.c: Likewise.
	* remote.c: Likewise.
	* reverse.c: Likewise.
	* rs6000-aix-tdep.c: Likewise.
	* ser-base.c: Likewise.
	* ser-go32.c: Likewise.
	* ser-mingw.c: Likewise.
	* ser-pipe.c: Likewise.
	* ser-tcp.c: Likewise.
	* ser-unix.c: Likewise.
	* serial.c: Likewise.
	* sh-tdep.c: Likewise.
	* sh64-tdep.c: Likewise.
	* shnbsd-tdep.c: Likewise.
	* skip.c: Likewise.
	* sol-thread.c: Likewise.
	* solib-dsbt.c: Likewise.
	* solib-frv.c: Likewise.
	* solib-osf.c: Likewise.
	* solib-som.c: Likewise.
	* solib-spu.c: Likewise.
	* solib-target.c: Likewise.
	* solib.c: Likewise.
	* somread.c: Likewise.
	* source.c: Likewise.
	* sparc-nat.c: Likewise.
	* sparc-sol2-tdep.c: Likewise.
	* sparc-tdep.c: Likewise.
	* sparc64-tdep.c: Likewise.
	* sparc64fbsd-tdep.c: Likewise.
	* sparc64nbsd-tdep.c: Likewise.
	* sparcnbsd-tdep.c: Likewise.
	* spu-linux-nat.c: Likewise.
	* spu-multiarch.c: Likewise.
	* spu-tdep.c: Likewise.
	* stabsread.c: Likewise.
	* stack.c: Likewise.
	* std-regs.c: Likewise.
	* symfile.c: Likewise.
	* symmisc.c: Likewise.
	* symtab.c: Likewise.
	* target.c: Likewise.
	* thread.c: Likewise.
	* tilegx-linux-nat.c: Likewise.
	* tilegx-tdep.c: Likewise.
	* top.c: Likewise.
	* tracepoint.c: Likewise.
	* tui/tui-command.c: Likewise.
	* tui/tui-data.c: Likewise.
	* tui/tui-disasm.c: Likewise.
	* tui/tui-file.c: Likewise.
	* tui/tui-layout.c: Likewise.
	* tui/tui-out.c: Likewise.
	* tui/tui-regs.c: Likewise.
	* tui/tui-source.c: Likewise.
	* tui/tui-stack.c: Likewise.
	* tui/tui-win.c: Likewise.
	* tui/tui-windata.c: Likewise.
	* tui/tui-winsource.c: Likewise.
	* typeprint.c: Likewise.
	* ui-file.c: Likewise.
	* ui-out.c: Likewise.
	* user-regs.c: Likewise.
	* utils.c: Likewise.
	* v850-tdep.c: Likewise.
	* valarith.c: Likewise.
	* valops.c: Likewise.
	* valprint.c: Likewise.
	* value.c: Likewise.
	* varobj.c: Likewise.
	* vax-tdep.c: Likewise.
	* vaxnbsd-tdep.c: Likewise.
	* vaxobsd-tdep.c: Likewise.
	* windows-nat.c: Likewise.
	* xcoffread.c: Likewise.
	* xml-support.c: Likewise.
	* xstormy16-tdep.c: Likewise.
	* xtensa-linux-nat.c: Likewise.

gdb/gdbserver/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* server.h: Do not include string.h.
	* event-loop.c: Likewise.
	* linux-low.c: Likewise.
	* regcache.c: Likewise.
	* remote-utils.c: Likewise.
	* spu-low.c: Likewise.
	* utils.c: Likewise.
 2014-08-07 09:06:47 +01:00
Gary Benson
dccbb60975 Include gdb_assert.h in common-defs.h 
This commit includes gdb_assert.h in common-defs.h and removes all
other inclusions.

gdb/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* common/common-defs.h: Include gdb_assert.h.
	* aarch64-tdep.c: Do not include gdb_assert.h.
	* addrmap.c: Likewise.
	* aix-thread.c: Likewise.
	* alpha-linux-tdep.c: Likewise.
	* alpha-mdebug-tdep.c: Likewise.
	* alphanbsd-tdep.c: Likewise.
	* amd64-nat.c: Likewise.
	* amd64-tdep.c: Likewise.
	* amd64bsd-nat.c: Likewise.
	* amd64fbsd-nat.c: Likewise.
	* amd64fbsd-tdep.c: Likewise.
	* amd64nbsd-nat.c: Likewise.
	* amd64nbsd-tdep.c: Likewise.
	* amd64obsd-nat.c: Likewise.
	* amd64obsd-tdep.c: Likewise.
	* arch-utils.c: Likewise.
	* arm-tdep.c: Likewise.
	* armbsd-tdep.c: Likewise.
	* auxv.c: Likewise.
	* bcache.c: Likewise.
	* bfin-tdep.c: Likewise.
	* blockframe.c: Likewise.
	* breakpoint.c: Likewise.
	* bsd-kvm.c: Likewise.
	* bsd-uthread.c: Likewise.
	* buildsym.c: Likewise.
	* c-exp.y: Likewise.
	* c-lang.c: Likewise.
	* charset.c: Likewise.
	* cleanups.c: Likewise.
	* cli-out.c: Likewise.
	* cli/cli-decode.c: Likewise.
	* cli/cli-dump.c: Likewise.
	* cli/cli-logging.c: Likewise.
	* cli/cli-script.c: Likewise.
	* cli/cli-utils.c: Likewise.
	* coffread.c: Likewise.
	* common/common-utils.c: Likewise.
	* common/queue.h: Likewise.
	* common/signals.c: Likewise.
	* common/vec.h: Likewise.
	* complaints.c: Likewise.
	* completer.c: Likewise.
	* corelow.c: Likewise.
	* cp-abi.c: Likewise.
	* cp-name-parser.y: Likewise.
	* cp-namespace.c: Likewise.
	* cp-support.c: Likewise.
	* cris-tdep.c: Likewise.
	* dbxread.c: Likewise.
	* dictionary.c: Likewise.
	* doublest.c: Likewise.
	* dsrec.c: Likewise.
	* dummy-frame.c: Likewise.
	* dwarf2-frame-tailcall.c: Likewise.
	* dwarf2-frame.c: Likewise.
	* dwarf2expr.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* eval.c: Likewise.
	* event-loop.c: Likewise.
	* exceptions.c: Likewise.
	* expprint.c: Likewise.
	* f-valprint.c: Likewise.
	* fbsd-nat.c: Likewise.
	* findvar.c: Likewise.
	* frame-unwind.c: Likewise.
	* frame.c: Likewise.
	* frv-tdep.c: Likewise.
	* gcore.c: Likewise.
	* gdb-dlfcn.c: Likewise.
	* gdb_bfd.c: Likewise.
	* gdbarch.c: Likewise.
	* gdbarch.sh: Likewise.
	* gdbtypes.c: Likewise.
	* gnu-nat.c: Likewise.
	* gnu-v3-abi.c: Likewise.
	* go-lang.c: Likewise.
	* guile/scm-exception.c: Likewise.
	* guile/scm-gsmob.c: Likewise.
	* guile/scm-lazy-string.c: Likewise.
	* guile/scm-math.c: Likewise.
	* guile/scm-pretty-print.c: Likewise.
	* guile/scm-safe-call.c: Likewise.
	* guile/scm-utils.c: Likewise.
	* guile/scm-value.c: Likewise.
	* h8300-tdep.c: Likewise.
	* hppa-hpux-nat.c: Likewise.
	* hppa-tdep.c: Likewise.
	* hppanbsd-tdep.c: Likewise.
	* hppaobsd-tdep.c: Likewise.
	* i386-darwin-nat.c: Likewise.
	* i386-darwin-tdep.c: Likewise.
	* i386-nto-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* i386bsd-nat.c: Likewise.
	* i386fbsd-tdep.c: Likewise.
	* i386gnu-nat.c: Likewise.
	* i386nbsd-tdep.c: Likewise.
	* i386obsd-tdep.c: Likewise.
	* i387-tdep.c: Likewise.
	* ia64-libunwind-tdep.c: Likewise.
	* ia64-tdep.c: Likewise.
	* inf-ptrace.c: Likewise.
	* inf-ttrace.c: Likewise.
	* infcall.c: Likewise.
	* infcmd.c: Likewise.
	* infrun.c: Likewise.
	* inline-frame.c: Likewise.
	* interps.c: Likewise.
	* jv-lang.c: Likewise.
	* jv-typeprint.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Likewise.
	* linux-thread-db.c: Likewise.
	* m32c-tdep.c: Likewise.
	* m32r-linux-nat.c: Likewise.
	* m32r-tdep.c: Likewise.
	* m68k-tdep.c: Likewise.
	* m68kbsd-nat.c: Likewise.
	* m68kbsd-tdep.c: Likewise.
	* m88k-tdep.c: Likewise.
	* machoread.c: Likewise.
	* macroexp.c: Likewise.
	* macrotab.c: Likewise.
	* maint.c: Likewise.
	* mdebugread.c: Likewise.
	* memory-map.c: Likewise.
	* mep-tdep.c: Likewise.
	* mi/mi-common.c: Likewise.
	* microblaze-tdep.c: Likewise.
	* mingw-hdep.c: Likewise.
	* mips-linux-nat.c: Likewise.
	* mips-linux-tdep.c: Likewise.
	* mips-tdep.c: Likewise.
	* mips64obsd-tdep.c: Likewise.
	* mipsnbsd-tdep.c: Likewise.
	* mn10300-linux-tdep.c: Likewise.
	* mn10300-tdep.c: Likewise.
	* moxie-tdep.c: Likewise.
	* mt-tdep.c: Likewise.
	* nat/linux-btrace.c: Likewise.
	* nat/linux-osdata.c: Likewise.
	* nat/linux-ptrace.c: Likewise.
	* nat/mips-linux-watch.c: Likewise.
	* nios2-linux-tdep.c: Likewise.
	* nios2-tdep.c: Likewise.
	* objc-lang.c: Likewise.
	* objfiles.c: Likewise.
	* obsd-nat.c: Likewise.
	* opencl-lang.c: Likewise.
	* osabi.c: Likewise.
	* parse.c: Likewise.
	* ppc-linux-nat.c: Likewise.
	* ppc-sysv-tdep.c: Likewise.
	* ppcfbsd-nat.c: Likewise.
	* ppcfbsd-tdep.c: Likewise.
	* ppcnbsd-nat.c: Likewise.
	* ppcnbsd-tdep.c: Likewise.
	* ppcobsd-nat.c: Likewise.
	* ppcobsd-tdep.c: Likewise.
	* printcmd.c: Likewise.
	* procfs.c: Likewise.
	* prologue-value.c: Likewise.
	* psymtab.c: Likewise.
	* python/py-lazy-string.c: Likewise.
	* python/py-value.c: Likewise.
	* regcache.c: Likewise.
	* reggroups.c: Likewise.
	* registry.c: Likewise.
	* remote-sim.c: Likewise.
	* remote.c: Likewise.
	* rs6000-aix-tdep.c: Likewise.
	* rs6000-tdep.c: Likewise.
	* s390-linux-tdep.c: Likewise.
	* score-tdep.c: Likewise.
	* ser-base.c: Likewise.
	* ser-mingw.c: Likewise.
	* sh-tdep.c: Likewise.
	* sh64-tdep.c: Likewise.
	* solib-darwin.c: Likewise.
	* solib-spu.c: Likewise.
	* solib-svr4.c: Likewise.
	* source.c: Likewise.
	* sparc-nat.c: Likewise.
	* sparc-sol2-tdep.c: Likewise.
	* sparc-tdep.c: Likewise.
	* sparc64-sol2-tdep.c: Likewise.
	* sparc64-tdep.c: Likewise.
	* sparc64fbsd-tdep.c: Likewise.
	* sparc64nbsd-tdep.c: Likewise.
	* sparc64obsd-tdep.c: Likewise.
	* sparcnbsd-tdep.c: Likewise.
	* sparcobsd-tdep.c: Likewise.
	* spu-multiarch.c: Likewise.
	* spu-tdep.c: Likewise.
	* stabsread.c: Likewise.
	* stack.c: Likewise.
	* symfile.c: Likewise.
	* symtab.c: Likewise.
	* target-descriptions.c: Likewise.
	* target-memory.c: Likewise.
	* target.c: Likewise.
	* tic6x-linux-tdep.c: Likewise.
	* tic6x-tdep.c: Likewise.
	* tilegx-linux-nat.c: Likewise.
	* tilegx-tdep.c: Likewise.
	* top.c: Likewise.
	* tramp-frame.c: Likewise.
	* tui/tui-out.c: Likewise.
	* tui/tui-winsource.c: Likewise.
	* ui-out.c: Likewise.
	* user-regs.c: Likewise.
	* utils.c: Likewise.
	* v850-tdep.c: Likewise.
	* valops.c: Likewise.
	* value.c: Likewise.
	* varobj.c: Likewise.
	* vax-nat.c: Likewise.
	* xml-syscall.c: Likewise.
	* xml-tdesc.c: Likewise.
	* xstormy16-tdep.c: Likewise.
	* xtensa-linux-nat.c: Likewise.
	* xtensa-tdep.c: Likewise.

gdb/gdbserver/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* server.h: Do not include gdb_assert.h.
 2014-08-07 09:06:45 +01:00
Maciej W. Rozycki
d54398a79e MIPS: Respect the "set mips compression" command 
This fixes gdbarch matching, making sure one for the opposite compressed
ISA variation is not chosen.  That in turn makes "set mips compression"
work; right now the setting sticks to the initial value, either inferred
from the ELF header of the binary first loaded or the default value if
no binary has been used.  This only affects debugging with no symbol
table available or no binary chosen at all, as otherwise symbol
annotations determine the compressed ISA variation.

	* mips-tdep.c (mips_gdbarch_init): Also check the compressed ISA
	variation in gdbarch matching.
 2014-07-25 18:57:06 +01:00
Andreas Arnez
b7195f2786 MIPS: Replace regset_alloc() invocations by static regset structures. 
After removal of the regset_alloc invocations, the appropriate tdep
fields become obsolete and are thus removed.
 2014-05-21 17:49:16 +02:00
Tom Tromey
77e371c079 start change to progspace independence 
This patch starts changing minimal symbols to be independent of the
program space.

Specifically, it adds a new objfile parameter to MSYMBOL_VALUE_ADDRESS
and changes all the code to use it.  This is needed so we can change
gdb to apply the section offset when a minsym's address is computed,
as opposed to baking the offsets into the symbol itself.

A few spots still need the unrelocated address.  For these, we
introduce MSYMBOL_VALUE_RAW_ADDRESS.

As a convenience, we also add the new macro BMSYMBOL_VALUE_ADDRESS,
which computes the address of a bound minimal symbol.  This just does
the obvious thing with the fields.

Note that this change does not actually enable program space
independence.  That requires more changes to gdb.  However, to ensure
that these changes compile properly, this patch does add the needed
section lookup code to MSYMBOL_VALUE_ADDRESS -- it just ensures it has
no effect at runtime by multiplying the offset by 0.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* ada-lang.c (ada_main_name): Update.
	(ada_add_standard_exceptions): Update.
	* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
	* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
	* arm-tdep.c (skip_prologue_function, arm_skip_stub): Update.
	* auxv.c (ld_so_xfer_auxv): Update.
	* avr-tdep.c (avr_scan_prologue): Update.
	* ax-gdb.c (gen_var_ref): Update.
	* blockframe.c (get_pc_function_start)
	(find_pc_partial_function_gnu_ifunc): Update.
	* breakpoint.c (create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Update.
	* bsd-uthread.c (bsd_uthread_lookup_address): Update.
	* c-valprint.c (c_val_print): Update.
	* coff-pe-read.c (add_pe_forwarded_sym): Update.
	* common/agent.c (agent_look_up_symbols): Update.
	* dbxread.c (find_stab_function_addr, end_psymtab): Update.
	* dwarf2loc.c (call_site_to_target_addr): Update.
	* dwarf2read.c (dw2_find_pc_sect_symtab): Update.
	* elfread.c (elf_gnu_ifunc_record_cache)
	(elf_gnu_ifunc_resolve_by_got): Update.
	* findvar.c (default_read_var_value): Update.
	* frame.c (inside_main_func): Update.
	* frv-tdep.c (frv_frame_this_id): Update.
	* glibc-tdep.c (glibc_skip_solib_resolver): Update.
	* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
	Update.
	* hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence)
	(hppa_hpux_find_dummy_bpaddr): Update.
	* hppa-tdep.c (hppa_symbol_address): Update.
	* infcmd.c (until_next_command): Update.
	* jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal):
	Update.
	* linespec.c (minsym_found, add_minsym): Update.
	* linux-nat.c (get_signo): Update.
	* linux-thread-db.c (inferior_has_bug): Update.
	* m32c-tdep.c (m32c_return_value)
	(m32c_m16c_address_to_pointer): Update.
	* m32r-tdep.c (m32r_frame_this_id): Update.
	* m68hc11-tdep.c (m68hc11_get_register_info): Update.
	* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
	* maint.c (maintenance_translate_address): Update.
	* minsyms.c (lookup_minimal_symbol_by_pc_name): Update.
	(frob_address): New function.
	(lookup_minimal_symbol_by_pc_section_1): Use raw addresses,
	frob_address.  Rename parameter to "pc_in".
	(compare_minimal_symbols, compact_minimal_symbols): Use raw
	addresses.
	(find_solib_trampoline_target, minimal_symbol_upper_bound):
	Update.
	* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
	* mips-tdep.c (mips_skip_pic_trampoline_code): Update.
	* objc-lang.c (find_objc_msgsend): Update.
	* objfiles.c (objfile_relocate1): Update.
	* obsd-tdep.c (obsd_skip_solib_resolver): Update.
	* p-valprint.c (pascal_val_print): Update.
	* parse.c (write_exp_msymbol): Update.
	* ppc-linux-tdep.c (ppc_linux_spe_context_lookup)
	(ppc_elfv2_skip_entrypoint): Update.
	* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
	* printcmd.c (build_address_symbolic, msym_info)
	(address_info): Update.
	* proc-service.c (ps_pglobal_lookup): Update.
	* psymtab.c (find_pc_sect_psymtab_closer)
	(find_pc_sect_psymtab, find_pc_sect_symtab_from_partial):
	Change msymbol parameter to bound_minimal_symbol.
	* ravenscar-thread.c (get_running_thread_id): Update.
	* remote.c (remote_check_symbols): Update.
	* sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw
	address.
	* sol2-tdep.c (sol2_skip_solib_resolver): Update.
	* solib-dsbt.c (lm_base): Update.
	* solib-frv.c (lm_base, main_got): Update.
	* solib-irix.c (locate_base): Update.
	* solib-som.c (som_solib_create_inferior_hook)
	(link_map_start): Update.
	* solib-spu.c (spu_enable_break, ocl_enable_break): Update.
	* solib-svr4.c (elf_locate_base, enable_break): Update.
	* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
	(flush_ea_cache): Update.
	* stabsread.c (define_symbol, scan_file_globals): Update.
	* stack.c (find_frame_funname): Update.
	* symfile-debug.c (debug_qf_expand_symtabs_matching)
	(debug_qf_find_pc_sect_symtab): Update.
	* symfile.c (simple_read_overlay_table)
	(simple_overlay_update): Update.
	* symfile.h (struct quick_symbol_functions)
	<find_pc_sect_symtab>: Change type of msymbol to
	bound_minimal_symbol.
	* symmisc.c (dump_msymbols): Update.
	* symtab.c (find_pc_sect_symtab_via_partial)
	(find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal)
	(search_symbols, print_msymbol_info): Update.
	* symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro.
	(MSYMBOL_VALUE_ADDRESS): Redefine.
	(BMSYMBOL_VALUE_ADDRESS): New macro.
	* tracepoint.c (scope_info): Update.
	* tui/tui-disasm.c (tui_find_disassembly_address)
	(tui_get_begin_asm_address): Update.
	* valops.c (find_function_in_inferior): Update.
	* value.c (value_static_field, value_fn_field): Update.
 2014-02-26 12:11:17 -07:00
Tom Tromey
efd66ac669 change minsym representation 
In a later patch we're going to change the minimal symbol address
calculation to apply section offsets at the point of use.  To make it
simpler to catch potential problem spots, this patch changes the
representation of minimal symbols and introduces new
minimal-symbol-specific variants of the various accessors.  This is
necessary because it would be excessively ambitious to try to convert
all the symbol types at once.

The core of this change is just renaming a field in minimal_symbol;
the rest is just a fairly mechanical rewording.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo.
	(MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
	(MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
	(MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
	(MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME)
	(MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME)
	(MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros.
	* ada-lang.c (ada_main_name): Update.
	(ada_lookup_simple_minsym): Update.
	(ada_make_symbol_completion_list): Update.
	(ada_add_standard_exceptions): Update.
	* ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update.
	* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
	* amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
	* arm-tdep.c (skip_prologue_function): Update.
	(arm_skip_stack_protector, arm_skip_stub): Update.
	* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
	(arm_wince_skip_main_prologue): Update.
	* auxv.c (ld_so_xfer_auxv): Update.
	* avr-tdep.c (avr_scan_prologue): Update.
	* ax-gdb.c (gen_var_ref): Update.
	* block.c (call_site_for_pc): Update.
	* blockframe.c (get_pc_function_start): Update.
	(find_pc_partial_function_gnu_ifunc): Update.
	* breakpoint.c (create_overlay_event_breakpoint): Update.
	(create_longjmp_master_breakpoint): Update.
	(create_std_terminate_master_breakpoint): Update.
	(create_exception_master_breakpoint): Update.
	(resolve_sal_pc): Update.
	* bsd-uthread.c (bsd_uthread_lookup_address): Update.
	* btrace.c (ftrace_print_function_name, ftrace_function_switched):
	Update.
	* c-valprint.c (c_val_print): Update.
	* coff-pe-read.c (add_pe_forwarded_sym): Update.
	* coffread.c (coff_symfile_read): Update.
	* common/agent.c (agent_look_up_symbols): Update.
	* dbxread.c (find_stab_function_addr): Update.
	(end_psymtab): Update.
	* dwarf2loc.c (call_site_to_target_addr): Update.
	(func_verify_no_selftailcall): Update.
	(tailcall_dump): Update.
	(call_site_find_chain_1): Update.
	(dwarf_expr_reg_to_entry_parameter): Update.
	* elfread.c (elf_gnu_ifunc_record_cache): Update.
	(elf_gnu_ifunc_resolve_by_got): Update.
	* f-valprint.c (info_common_command): Update.
	* findvar.c (read_var_value): Update.
	* frame.c (get_prev_frame_1): Update.
	(inside_main_func): Update.
	* frv-tdep.c (frv_skip_main_prologue): Update.
	(frv_frame_this_id): Update.
	* glibc-tdep.c (glibc_skip_solib_resolver): Update.
	* gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
	* gnu-v3-abi.c (gnuv3_rtti_type): Update.
	(gnuv3_skip_trampoline): Update.
	* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update.
	(hppa64_hpux_in_solib_call_trampoline): Update.
	(hppa_hpux_skip_trampoline_code): Update.
	(hppa64_hpux_search_dummy_call_sequence): Update.
	(hppa_hpux_find_import_stub_for_addr): Update.
	(hppa_hpux_find_dummy_bpaddr): Update.
	* hppa-tdep.c (hppa_symbol_address)
	(hppa_lookup_stub_minimal_symbol): Update.
	* i386-tdep.c (i386_skip_main_prologue): Update.
	(i386_pe_skip_trampoline_code): Update.
	* ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
	* infcall.c (get_function_name): Update.
	* infcmd.c (until_next_command): Update.
	* jit.c (jit_breakpoint_re_set_internal): Update.
	(jit_inferior_init): Update.
	* linespec.c (minsym_found): Update.
	(add_minsym): Update.
	* linux-fork.c (info_checkpoints_command): Update.
	* linux-nat.c (get_signo): Update.
	* linux-thread-db.c (inferior_has_bug): Update.
	* m32c-tdep.c (m32c_return_value): Update.
	(m32c_m16c_address_to_pointer): Update.
	(m32c_m16c_pointer_to_address): Update.
	* m32r-tdep.c (m32r_frame_this_id): Update.
	* m68hc11-tdep.c (m68hc11_get_register_info): Update.
	* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
	* maint.c (maintenance_translate_address): Update.
	* minsyms.c (add_minsym_to_hash_table): Update.
	(add_minsym_to_demangled_hash_table): Update.
	(msymbol_objfile): Update.
	(lookup_minimal_symbol): Update.
	(iterate_over_minimal_symbols): Update.
	(lookup_minimal_symbol_text): Update.
	(lookup_minimal_symbol_by_pc_name): Update.
	(lookup_minimal_symbol_solib_trampoline): Update.
	(lookup_minimal_symbol_by_pc_section_1): Update.
	(lookup_minimal_symbol_and_objfile): Update.
	(prim_record_minimal_symbol_full): Update.
	(compare_minimal_symbols): Update.
	(compact_minimal_symbols): Update.
	(build_minimal_symbol_hash_tables): Update.
	(install_minimal_symbols): Update.
	(terminate_minimal_symbol_table): Update.
	(find_solib_trampoline_target): Update.
	(minimal_symbol_upper_bound): Update.
	* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
	* mips-tdep.c (mips_stub_frame_sniffer): Update.
	(mips_skip_pic_trampoline_code): Update.
	* msp430-tdep.c (msp430_skip_trampoline_code): Update.
	* objc-lang.c (selectors_info): Update.
	(classes_info): Update.
	(find_methods): Update.
	(find_imps): Update.
	(find_objc_msgsend): Update.
	* objfiles.c (objfile_relocate1): Update.
	* objfiles.h (ALL_OBJFILE_MSYMBOLS): Update.
	* obsd-tdep.c (obsd_skip_solib_resolver): Update.
	* p-valprint.c (pascal_val_print): Update.
	* parse.c (write_exp_msymbol): Update.
	* ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code)
	(ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update.
	* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
	* printcmd.c (build_address_symbolic): Update.
	(sym_info): Update.
	(address_info): Update.
	* proc-service.c (ps_pglobal_lookup): Update.
	* psymtab.c (find_pc_sect_psymtab_closer): Update.
	(find_pc_sect_psymtab): Update.
	* python/py-framefilter.c (py_print_frame): Update.
	* ravenscar-thread.c (get_running_thread_id): Update.
	* record-btrace.c (btrace_call_history, btrace_get_bfun_name):
	Update.
	* remote.c (remote_check_symbols): Update.
	* rs6000-tdep.c (rs6000_skip_main_prologue): Update.
	(rs6000_skip_trampoline_code): Update.
	* sh64-tdep.c (sh64_elf_make_msymbol_special): Update.
	* sol2-tdep.c (sol2_skip_solib_resolver): Update.
	* solib-dsbt.c (lm_base): Update.
	* solib-frv.c (lm_base): Update.
	(main_got): Update.
	* solib-irix.c (locate_base): Update.
	* solib-som.c (som_solib_create_inferior_hook): Update.
	(som_solib_desire_dynamic_linker_symbols): Update.
	(link_map_start): Update.
	* solib-spu.c (spu_enable_break): Update.
	(ocl_enable_break): Update.
	* solib-svr4.c (elf_locate_base): Update.
	(enable_break): Update.
	* spu-tdep.c (spu_get_overlay_table): Update.
	(spu_catch_start): Update.
	(flush_ea_cache): Update.
	* stabsread.c (define_symbol): Update.
	(scan_file_globals): Update.
	* stack.c (find_frame_funname): Update.
	(frame_info): Update.
	* symfile.c (simple_read_overlay_table): Update.
	(simple_overlay_update): Update.
	* symmisc.c (dump_msymbols): Update.
	* symtab.c (fixup_section): Update.
	(find_pc_sect_line): Update.
	(skip_prologue_sal): Update.
	(search_symbols): Update.
	(print_msymbol_info): Update.
	(rbreak_command): Update.
	(MCOMPLETION_LIST_ADD_SYMBOL): New macro.
	(completion_list_objc_symbol): Update.
	(default_make_symbol_completion_list_break_on): Update.
	* tracepoint.c (scope_info): Update.
	* tui/tui-disasm.c (tui_find_disassembly_address): Update.
	(tui_get_begin_asm_address): Update.
	* valops.c (find_function_in_inferior): Update.
	* value.c (value_static_field): Update.
	(value_fn_field): Update.
 2014-02-26 12:11:16 -07:00
Joel Brobecker
ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Tom Tromey
0e9f083f4c remove gdb_string.h 
This removes gdb_string.h.  This patch is purely mechanical.  I
created it by running the two commands:

    git rm common/gdb_string.h
    perl -pi -e's/"gdb_string.h"/<string.h>/;'  *.[chyl] */*.[chyl]

2013-11-18  Tom Tromey  <tromey@redhat.com>

	* common/gdb_string.h: Remove.
	* aarch64-tdep.c: Use string.h, not gdb_string.h.
	* ada-exp.y: Use string.h, not gdb_string.h.
	* ada-lang.c: Use string.h, not gdb_string.h.
	* ada-lex.l: Use string.h, not gdb_string.h.
	* ada-typeprint.c: Use string.h, not gdb_string.h.
	* ada-valprint.c: Use string.h, not gdb_string.h.
	* aix-thread.c: Use string.h, not gdb_string.h.
	* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
	* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
	* alpha-nat.c: Use string.h, not gdb_string.h.
	* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
	* alpha-tdep.c: Use string.h, not gdb_string.h.
	* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
	* amd64-linux-nat.c: Use string.h, not gdb_string.h.
	* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
	* amd64-nat.c: Use string.h, not gdb_string.h.
	* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
	* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
	* arch-utils.c: Use string.h, not gdb_string.h.
	* arm-linux-nat.c: Use string.h, not gdb_string.h.
	* arm-linux-tdep.c: Use string.h, not gdb_string.h.
	* arm-tdep.c: Use string.h, not gdb_string.h.
	* arm-wince-tdep.c: Use string.h, not gdb_string.h.
	* armbsd-tdep.c: Use string.h, not gdb_string.h.
	* armnbsd-nat.c: Use string.h, not gdb_string.h.
	* armnbsd-tdep.c: Use string.h, not gdb_string.h.
	* armobsd-tdep.c: Use string.h, not gdb_string.h.
	* avr-tdep.c: Use string.h, not gdb_string.h.
	* ax-gdb.c: Use string.h, not gdb_string.h.
	* ax-general.c: Use string.h, not gdb_string.h.
	* bcache.c: Use string.h, not gdb_string.h.
	* bfin-tdep.c: Use string.h, not gdb_string.h.
	* breakpoint.c: Use string.h, not gdb_string.h.
	* build-id.c: Use string.h, not gdb_string.h.
	* buildsym.c: Use string.h, not gdb_string.h.
	* c-exp.y: Use string.h, not gdb_string.h.
	* c-lang.c: Use string.h, not gdb_string.h.
	* c-typeprint.c: Use string.h, not gdb_string.h.
	* c-valprint.c: Use string.h, not gdb_string.h.
	* charset.c: Use string.h, not gdb_string.h.
	* cli-out.c: Use string.h, not gdb_string.h.
	* cli/cli-cmds.c: Use string.h, not gdb_string.h.
	* cli/cli-decode.c: Use string.h, not gdb_string.h.
	* cli/cli-dump.c: Use string.h, not gdb_string.h.
	* cli/cli-interp.c: Use string.h, not gdb_string.h.
	* cli/cli-logging.c: Use string.h, not gdb_string.h.
	* cli/cli-script.c: Use string.h, not gdb_string.h.
	* cli/cli-setshow.c: Use string.h, not gdb_string.h.
	* cli/cli-utils.c: Use string.h, not gdb_string.h.
	* coffread.c: Use string.h, not gdb_string.h.
	* common/common-utils.c: Use string.h, not gdb_string.h.
	* common/filestuff.c: Use string.h, not gdb_string.h.
	* common/linux-procfs.c: Use string.h, not gdb_string.h.
	* common/linux-ptrace.c: Use string.h, not gdb_string.h.
	* common/signals.c: Use string.h, not gdb_string.h.
	* common/vec.h: Use string.h, not gdb_string.h.
	* core-regset.c: Use string.h, not gdb_string.h.
	* corefile.c: Use string.h, not gdb_string.h.
	* corelow.c: Use string.h, not gdb_string.h.
	* cp-abi.c: Use string.h, not gdb_string.h.
	* cp-support.c: Use string.h, not gdb_string.h.
	* cp-valprint.c: Use string.h, not gdb_string.h.
	* cris-tdep.c: Use string.h, not gdb_string.h.
	* d-lang.c: Use string.h, not gdb_string.h.
	* dbxread.c: Use string.h, not gdb_string.h.
	* dcache.c: Use string.h, not gdb_string.h.
	* demangle.c: Use string.h, not gdb_string.h.
	* dicos-tdep.c: Use string.h, not gdb_string.h.
	* disasm.c: Use string.h, not gdb_string.h.
	* doublest.c: Use string.h, not gdb_string.h.
	* dsrec.c: Use string.h, not gdb_string.h.
	* dummy-frame.c: Use string.h, not gdb_string.h.
	* dwarf2-frame.c: Use string.h, not gdb_string.h.
	* dwarf2loc.c: Use string.h, not gdb_string.h.
	* dwarf2read.c: Use string.h, not gdb_string.h.
	* elfread.c: Use string.h, not gdb_string.h.
	* environ.c: Use string.h, not gdb_string.h.
	* eval.c: Use string.h, not gdb_string.h.
	* event-loop.c: Use string.h, not gdb_string.h.
	* exceptions.c: Use string.h, not gdb_string.h.
	* exec.c: Use string.h, not gdb_string.h.
	* expprint.c: Use string.h, not gdb_string.h.
	* f-exp.y: Use string.h, not gdb_string.h.
	* f-lang.c: Use string.h, not gdb_string.h.
	* f-typeprint.c: Use string.h, not gdb_string.h.
	* f-valprint.c: Use string.h, not gdb_string.h.
	* fbsd-nat.c: Use string.h, not gdb_string.h.
	* findcmd.c: Use string.h, not gdb_string.h.
	* findvar.c: Use string.h, not gdb_string.h.
	* fork-child.c: Use string.h, not gdb_string.h.
	* frame.c: Use string.h, not gdb_string.h.
	* frv-linux-tdep.c: Use string.h, not gdb_string.h.
	* frv-tdep.c: Use string.h, not gdb_string.h.
	* gdb.c: Use string.h, not gdb_string.h.
	* gdb_bfd.c: Use string.h, not gdb_string.h.
	* gdbarch.c: Use string.h, not gdb_string.h.
	* gdbtypes.c: Use string.h, not gdb_string.h.
	* gnu-nat.c: Use string.h, not gdb_string.h.
	* gnu-v2-abi.c: Use string.h, not gdb_string.h.
	* gnu-v3-abi.c: Use string.h, not gdb_string.h.
	* go-exp.y: Use string.h, not gdb_string.h.
	* go-lang.c: Use string.h, not gdb_string.h.
	* go32-nat.c: Use string.h, not gdb_string.h.
	* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
	* hppa-linux-nat.c: Use string.h, not gdb_string.h.
	* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
	* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
	* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
	* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
	* i386-linux-nat.c: Use string.h, not gdb_string.h.
	* i386-linux-tdep.c: Use string.h, not gdb_string.h.
	* i386-nto-tdep.c: Use string.h, not gdb_string.h.
	* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
	* i386-tdep.c: Use string.h, not gdb_string.h.
	* i386bsd-tdep.c: Use string.h, not gdb_string.h.
	* i386gnu-nat.c: Use string.h, not gdb_string.h.
	* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
	* i386obsd-tdep.c: Use string.h, not gdb_string.h.
	* i387-tdep.c: Use string.h, not gdb_string.h.
	* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
	* ia64-linux-nat.c: Use string.h, not gdb_string.h.
	* inf-child.c: Use string.h, not gdb_string.h.
	* inf-ptrace.c: Use string.h, not gdb_string.h.
	* inf-ttrace.c: Use string.h, not gdb_string.h.
	* infcall.c: Use string.h, not gdb_string.h.
	* infcmd.c: Use string.h, not gdb_string.h.
	* inflow.c: Use string.h, not gdb_string.h.
	* infrun.c: Use string.h, not gdb_string.h.
	* interps.c: Use string.h, not gdb_string.h.
	* iq2000-tdep.c: Use string.h, not gdb_string.h.
	* irix5-nat.c: Use string.h, not gdb_string.h.
	* jv-exp.y: Use string.h, not gdb_string.h.
	* jv-lang.c: Use string.h, not gdb_string.h.
	* jv-typeprint.c: Use string.h, not gdb_string.h.
	* jv-valprint.c: Use string.h, not gdb_string.h.
	* language.c: Use string.h, not gdb_string.h.
	* linux-fork.c: Use string.h, not gdb_string.h.
	* linux-nat.c: Use string.h, not gdb_string.h.
	* lm32-tdep.c: Use string.h, not gdb_string.h.
	* m2-exp.y: Use string.h, not gdb_string.h.
	* m2-typeprint.c: Use string.h, not gdb_string.h.
	* m32c-tdep.c: Use string.h, not gdb_string.h.
	* m32r-linux-nat.c: Use string.h, not gdb_string.h.
	* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
	* m32r-rom.c: Use string.h, not gdb_string.h.
	* m32r-tdep.c: Use string.h, not gdb_string.h.
	* m68hc11-tdep.c: Use string.h, not gdb_string.h.
	* m68k-tdep.c: Use string.h, not gdb_string.h.
	* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
	* m68klinux-nat.c: Use string.h, not gdb_string.h.
	* m68klinux-tdep.c: Use string.h, not gdb_string.h.
	* m88k-tdep.c: Use string.h, not gdb_string.h.
	* macrocmd.c: Use string.h, not gdb_string.h.
	* main.c: Use string.h, not gdb_string.h.
	* mdebugread.c: Use string.h, not gdb_string.h.
	* mem-break.c: Use string.h, not gdb_string.h.
	* memattr.c: Use string.h, not gdb_string.h.
	* memory-map.c: Use string.h, not gdb_string.h.
	* mep-tdep.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
	* mi/mi-cmds.c: Use string.h, not gdb_string.h.
	* mi/mi-console.c: Use string.h, not gdb_string.h.
	* mi/mi-getopt.c: Use string.h, not gdb_string.h.
	* mi/mi-interp.c: Use string.h, not gdb_string.h.
	* mi/mi-main.c: Use string.h, not gdb_string.h.
	* mi/mi-parse.c: Use string.h, not gdb_string.h.
	* microblaze-rom.c: Use string.h, not gdb_string.h.
	* microblaze-tdep.c: Use string.h, not gdb_string.h.
	* mingw-hdep.c: Use string.h, not gdb_string.h.
	* minidebug.c: Use string.h, not gdb_string.h.
	* minsyms.c: Use string.h, not gdb_string.h.
	* mips-irix-tdep.c: Use string.h, not gdb_string.h.
	* mips-linux-tdep.c: Use string.h, not gdb_string.h.
	* mips-tdep.c: Use string.h, not gdb_string.h.
	* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsread.c: Use string.h, not gdb_string.h.
	* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
	* mn10300-tdep.c: Use string.h, not gdb_string.h.
	* monitor.c: Use string.h, not gdb_string.h.
	* moxie-tdep.c: Use string.h, not gdb_string.h.
	* mt-tdep.c: Use string.h, not gdb_string.h.
	* nbsd-tdep.c: Use string.h, not gdb_string.h.
	* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
	* nto-procfs.c: Use string.h, not gdb_string.h.
	* nto-tdep.c: Use string.h, not gdb_string.h.
	* objc-lang.c: Use string.h, not gdb_string.h.
	* objfiles.c: Use string.h, not gdb_string.h.
	* opencl-lang.c: Use string.h, not gdb_string.h.
	* osabi.c: Use string.h, not gdb_string.h.
	* osdata.c: Use string.h, not gdb_string.h.
	* p-exp.y: Use string.h, not gdb_string.h.
	* p-lang.c: Use string.h, not gdb_string.h.
	* p-typeprint.c: Use string.h, not gdb_string.h.
	* parse.c: Use string.h, not gdb_string.h.
	* posix-hdep.c: Use string.h, not gdb_string.h.
	* ppc-linux-nat.c: Use string.h, not gdb_string.h.
	* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
	* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
	* printcmd.c: Use string.h, not gdb_string.h.
	* procfs.c: Use string.h, not gdb_string.h.
	* prologue-value.c: Use string.h, not gdb_string.h.
	* python/py-auto-load.c: Use string.h, not gdb_string.h.
	* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
	* ravenscar-thread.c: Use string.h, not gdb_string.h.
	* regcache.c: Use string.h, not gdb_string.h.
	* registry.c: Use string.h, not gdb_string.h.
	* remote-fileio.c: Use string.h, not gdb_string.h.
	* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
	* remote-mips.c: Use string.h, not gdb_string.h.
	* remote-sim.c: Use string.h, not gdb_string.h.
	* remote.c: Use string.h, not gdb_string.h.
	* reverse.c: Use string.h, not gdb_string.h.
	* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
	* ser-base.c: Use string.h, not gdb_string.h.
	* ser-go32.c: Use string.h, not gdb_string.h.
	* ser-mingw.c: Use string.h, not gdb_string.h.
	* ser-pipe.c: Use string.h, not gdb_string.h.
	* ser-tcp.c: Use string.h, not gdb_string.h.
	* ser-unix.c: Use string.h, not gdb_string.h.
	* serial.c: Use string.h, not gdb_string.h.
	* sh-tdep.c: Use string.h, not gdb_string.h.
	* sh64-tdep.c: Use string.h, not gdb_string.h.
	* shnbsd-tdep.c: Use string.h, not gdb_string.h.
	* skip.c: Use string.h, not gdb_string.h.
	* sol-thread.c: Use string.h, not gdb_string.h.
	* solib-dsbt.c: Use string.h, not gdb_string.h.
	* solib-frv.c: Use string.h, not gdb_string.h.
	* solib-osf.c: Use string.h, not gdb_string.h.
	* solib-spu.c: Use string.h, not gdb_string.h.
	* solib-target.c: Use string.h, not gdb_string.h.
	* solib.c: Use string.h, not gdb_string.h.
	* somread.c: Use string.h, not gdb_string.h.
	* source.c: Use string.h, not gdb_string.h.
	* sparc-nat.c: Use string.h, not gdb_string.h.
	* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
	* sparc-tdep.c: Use string.h, not gdb_string.h.
	* sparc64-tdep.c: Use string.h, not gdb_string.h.
	* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* spu-linux-nat.c: Use string.h, not gdb_string.h.
	* spu-multiarch.c: Use string.h, not gdb_string.h.
	* spu-tdep.c: Use string.h, not gdb_string.h.
	* stabsread.c: Use string.h, not gdb_string.h.
	* stack.c: Use string.h, not gdb_string.h.
	* std-regs.c: Use string.h, not gdb_string.h.
	* symfile.c: Use string.h, not gdb_string.h.
	* symmisc.c: Use string.h, not gdb_string.h.
	* symtab.c: Use string.h, not gdb_string.h.
	* target.c: Use string.h, not gdb_string.h.
	* thread.c: Use string.h, not gdb_string.h.
	* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
	* tilegx-tdep.c: Use string.h, not gdb_string.h.
	* top.c: Use string.h, not gdb_string.h.
	* tracepoint.c: Use string.h, not gdb_string.h.
	* tui/tui-command.c: Use string.h, not gdb_string.h.
	* tui/tui-data.c: Use string.h, not gdb_string.h.
	* tui/tui-disasm.c: Use string.h, not gdb_string.h.
	* tui/tui-file.c: Use string.h, not gdb_string.h.
	* tui/tui-layout.c: Use string.h, not gdb_string.h.
	* tui/tui-out.c: Use string.h, not gdb_string.h.
	* tui/tui-regs.c: Use string.h, not gdb_string.h.
	* tui/tui-source.c: Use string.h, not gdb_string.h.
	* tui/tui-stack.c: Use string.h, not gdb_string.h.
	* tui/tui-win.c: Use string.h, not gdb_string.h.
	* tui/tui-windata.c: Use string.h, not gdb_string.h.
	* tui/tui-winsource.c: Use string.h, not gdb_string.h.
	* typeprint.c: Use string.h, not gdb_string.h.
	* ui-file.c: Use string.h, not gdb_string.h.
	* ui-out.c: Use string.h, not gdb_string.h.
	* user-regs.c: Use string.h, not gdb_string.h.
	* utils.c: Use string.h, not gdb_string.h.
	* v850-tdep.c: Use string.h, not gdb_string.h.
	* valarith.c: Use string.h, not gdb_string.h.
	* valops.c: Use string.h, not gdb_string.h.
	* valprint.c: Use string.h, not gdb_string.h.
	* value.c: Use string.h, not gdb_string.h.
	* varobj.c: Use string.h, not gdb_string.h.
	* vax-tdep.c: Use string.h, not gdb_string.h.
	* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
	* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
	* windows-nat.c: Use string.h, not gdb_string.h.
	* xcoffread.c: Use string.h, not gdb_string.h.
	* xml-support.c: Use string.h, not gdb_string.h.
	* xstormy16-tdep.c: Use string.h, not gdb_string.h.
	* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
 2013-11-18 13:29:00 -07:00
Maciej W. Rozycki
3373342d64 * mips-tdep.c (micromips_deal_with_atomic_sequence): Correct 
formatting.
 2013-07-24 22:23:12 +00:00
Maciej W. Rozycki
d929bc19b9 include/elf/ 
* mips.h (Tag_GNU_MIPS_ABI_FP): Remove comment.
	(Val_GNU_MIPS_ABI_FP_ANY, Val_GNU_MIPS_ABI_FP_DOUBLE,
	Val_GNU_MIPS_ABI_FP_SINGLE, Val_GNU_MIPS_ABI_FP_SOFT,
	Val_GNU_MIPS_ABI_FP_64): New enum.

	bfd/
	* elfxx-mips.c (mips_elf_merge_obj_attributes): Replace hardcoded
	magic numbers with enum values.

	binutils/
	* readelf.c (display_mips_gnu_attribute): Replace hardcoded magic
	numbers with enum values.

	gdb/
	* mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic
	numbers with enum values.
 2013-07-15 15:07:30 +00:00
Maciej W. Rozycki
a2fb2cee96 * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr. 2013-06-26 15:37:49 +00:00
Maciej W. Rozycki
1aee363c16 * mips-tdep.c (mips_next_pc): Fix a typo. 2013-06-26 15:10:33 +00:00
Maciej W. Rozycki
3356937a9d * mips-tdep.c (micromips_scan_prologue): Fix a typo. 2013-06-26 15:00:10 +00:00
Maciej W. Rozycki
1bbce13264 bfd/ 
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
	prototype.
	* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
	(bfd_elf32_get_synthetic_symtab): New macro.
	* elfxx-mips.c (plt_entry): New structure.
	(mips_elf_link_hash_entry): Add use_plt_entry member.
	(mips_elf_link_hash_table): Rename plt_entry_size member to
	plt_mips_entry_size.  Add plt_comp_entry_size, plt_mips_offset,
	plt_comp_offset, plt_got_index entries and plt_header_is_comp
	members.
	(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
	(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
	(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
	(STUB_LI16S_MICROMIPS): Likewise.
	(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
	(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
	(micromips_o32_exec_plt0_entry): New variable.
	(mips16_o32_exec_plt_entry): Likewise.
	(micromips_o32_exec_plt_entry): Likewise.
	(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
	(mips_elf_output_extsym): Update to use gotplt_union's plist
	member rather than offset.
	(mips_elf_gotplt_index): Likewise.  Remove the VxWorks
	restriction.  Use MIPS_ELF_GOT_SIZE to calculate GOT address.
	(mips_elf_count_got_symbols): Update to use gotplt_union's plist
	member rather than offset.
	(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
	entries.
	(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
	here.
	(mips_elf_make_plt_record): New function.
	(_bfd_mips_elf_check_relocs): Update comment.  Record occurences
	of JAL relocations that might need a PLT entry.
	(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
	gotplt_union's plist member rather than offset.  Set individual
	PLT entry sizes here.  Handle MIPS16/microMIPS PLT entries.
	Don't set the symbol's value in the symbol table for PLT
	references here.  Don't set the PLT or PLT GOT section sizes
	here.
	(mips_elf_estimate_stub_size): Handle microMIPS stubs.
	(mips_elf_allocate_lazy_stub): Likewise.
	(mips_elf_lay_out_lazy_stubs): Likewise.  Define a _MIPS_STUBS_
	magic symbol.
	(mips_elf_set_plt_sym_value): New function.
	(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
	PLT and PLT GOT section sizes here.  Set the symbol values in
	the symbol table for PLT references here.  Handle microMIPS
	annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
	(_bfd_mips_elf_finish_dynamic_symbol): Update to use
	gotplt_union's plist member rather than offset.  Handle
	MIPS16/microMIPS PLT entries.  Handle microMIPS stubs.
	(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
	gotplt_union's plist member rather than offset.  Use
	MIPS_ELF_GOT_SIZE to calculate GOT address.
	(mips_finish_exec_plt): Handle microMIPS PLT.  Return status.
	(_bfd_mips_elf_finish_dynamic_sections): Handle result from
	mips_finish_exec_plt.
	(_bfd_mips_elf_link_hash_table_create): Update to use
	gotplt_union's plist member rather than offset.
	(_bfd_mips_elf_get_synthetic_symtab): New function.

	include/elf/
	* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
	(ELF_ST_SET_MIPS_PLT): Likewise.

	gdb/
	* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
	microMIPS synthetic symbols.

	ld/
	* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
	as close to .plt as possible.
	* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
	$PLT_NEXT_DATA variables.

	ld/testsuite/
	* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
	* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
	magic symbol.
	* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
	* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
	* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
	* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
	* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
	* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
	* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
	* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
	* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
	* ld-mips-elf/tlslib-o32.d: Likewise.

	opcodes/
	* mips-dis.c (is_mips16_plt_tail): New function.
	(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
	word.
	(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
 2013-06-24 23:55:46 +00:00
Maciej W. Rozycki
3e5d3a5aaf * objfiles.h (pc_in_section): New prototype. 
(in_plt_section): Remove name argument, replace prototype with
	static inline function.
	* mips-tdep.h: Include "objfiles.h".
	(in_mips_stubs_section): New function.
	* hppa-tdep.h (gdbarch_tdep): Remove name argument of
	in_solib_call_trampoline member.
	(hppa_in_solib_call_trampoline): Remove name argument.
	* objfiles.c (pc_in_section): New function.
	(in_plt_section): Remove function.
	* mips-linux-tdep.c: Include "objfiles.h".
	(mips_linux_in_dynsym_stub): Call in_mips_stubs_section.  Remove
	name argument.  Return 1 rather than the low 16-bit halfword of
	any instruction examined.
	(mips_linux_in_dynsym_resolve_code): Update
	mips_linux_in_dynsym_stub call accordingly.
	* mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
	rather than an equivalent hand-coded sequence.
	* hppa-hpux-tdep.c (in_opd_section): Remove function.
	(hppa32_hpux_in_solib_call_trampoline): Remove name argument.
	(hppa64_hpux_in_solib_call_trampoline): Likewise.
	(hppa64_hpux_find_global_pointer): Use pc_in_section rather than
	in_opd_section.
	* hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
	on call to tdep->in_solib_call_trampoline.
	(hppa_in_solib_call_trampoline): Remove name argument, update
	according to in_plt_section change.
	(hppa_skip_trampoline_code): Update according to in_plt_section
	change.
	* aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
	* arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
	Likewise.
	* arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
	* hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
	* hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
	* nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
	* nto-tdep.c (nto_relocate_section_addresses): Likewise.
	* s390-tdep.c (s390_stub_frame_sniffer): Likewise.
	* sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
	* solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
	* solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
	* solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
	* solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
	* sparc-tdep.c (sparc_analyze_prologue): Likewise.
	* tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
 2013-06-24 22:18:32 +00:00
Pedro Alves
70242eb16c mips-tdep.c: Wrong signness for local holding PC register. 
Addresses on MIPS are signed, and we're indeed using
regcache_cooked_read_signed to read the PC, but, we're passing it the
address of an unsigned variable, which triggers a -Wpointer-sign
warning.  I've chosen to change the variable's type.  I believe this
will end up being the same (though I can't test it).

gdb/
2013-04-19  Pedro Alves  <palves@redhat.com>

	* mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
 2013-04-19 15:21:24 +00:00
Pedro Alves
44096aee2e alpha-tdep.c/mips-tdep.c: "set heuristic-fence-post" is signed/zinteger. 
These commands are currently var_zinteger, hence their control
variable is signed.

gdb/
2013-04-19  Pedro Alves  <palves@redhat.com>

	* alpha-tdep.c (heuristic_fence_post): Change type to int.
	(alpha_heuristic_proc_start): Adjust to check -1 instead of
	UINT_MAX.
	* mips-tdep.c (heuristic_fence_post): Change type to int.
	(heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
 2013-04-19 15:15:21 +00:00
Tom Tromey
7cbd4a934e * minsyms.h (struct bound_minimal_symbol): New. 
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
	Remove objfile argument.
	(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
	Return bound_minimal_symbol.
	* minsyms.c (lookup_minimal_symbol_by_pc_1)
	(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
	Return bound_minimal_symbol.
	(in_gnu_ifunc_stub): Update.
	(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
	Remove 'objfile_p' argument.
	(lookup_solib_trampoline_symbol_by_pc): Update.
	* ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
	arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
	c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
	glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
	i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
	linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
	mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
	ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
	stack.c, symtab.c, tui/tui-disasm.c: Update.
 2013-04-08 19:59:09 +00:00
Maciej W. Rozycki
ca9c94efe7 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero 
if $fp is used as the virtual frame pointer.
 2013-02-24 12:54:04 +00:00
Joel Brobecker
28e7fd6234 Update years in copyright notice for the GDB files. 
Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.
 2013-01-01 06:33:28 +00:00
Andreas Tobler
4b844a3875 2012-12-19 Andreas Tobler <andreast@neon.andreas.nets> 
* mips-tdep.c (micromips_deal_with_atomic_sequence): Initialize
        branch_bp to keep gcc happy.
 2012-12-19 20:57:55 +00:00
Joel Brobecker
ca9d61b90f rename frame_register_read into deprecated_frame_register_read. 
gdb/ChangeLog:

        * frame.h (deprecated_frame_register_read): Renames
        frame_register_read.
        * frame.c (deprecated_frame_register_read): Renames
        frame_register_read.  Update all callers.
        * i386-tdep.c: Update all callers of frame_register_read.
        * infcmd.c: Likewise.
        * jit.c: Likewise.
        * mips-tdep.c: Likewise.
        * mt-tdep.c: Likewise.
        * sh64-tdep.c: Likewise.
 2012-11-12 21:59:07 +00:00
Tom Tromey
f5656eadf4 * gdbarch.sh (target_gdbarch): Remove macro. 
(get_target_gdbarch): Rename to target_gdbarch.
	* gdbarch.c, gdbarch.h: Rebuild.
	* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
	arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
	darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
	filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
	ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
	linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
	mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
	mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
	nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
	procfs.c, progspace.c, ravenscar-thread.c, record.c,
	remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
	rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
	solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
	solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
	solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
	spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
	target-descriptions.c, target.c, target.h, tracepoint.c,
	windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
	common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
	python/py-inferior.c, python/python.c: Update.
 2012-11-09 19:58:03 +00:00
Siddhesh Poyarekar
354ecfd5f7 * m2-valprint.c (m2_print_array_contents): Eliminate variable 
ELTLEN and use TYPE_LENGTH directly.
	(m2_val_print): Likewise.
	* m68k-tdep.c (m68k_svr4_extract_return_value): Eliminate
	variable LEN and use TYPE_LENGTH directly.
	(m68k_svr4_store_return_value): Likewise.
	* mips-tdep.c (mips_o32_push_dummy_call): Eliminate variable
	ARGLEN and use TYPE_LENGTH directly.
	(mips_o64_push_dummy_call): Likewise.
	* s390-tdep (s390_function_arg_pass_by_reference): Eliminate
	variable LENGTH and use TYPE_LENGTH directly.
	(s390_function_arg_float): Likewise.
	(s390_function_arg_integer): Likewise.
	(s390_push_dummy_call): Likewise.
	(s390_return_value_convention): Likewise.
	* spu-tdep.c (spu_push_dummy_call): Eliminate LEN and use
	TYPE_LENGTH directly.
 2012-09-17 08:52:18 +00:00
Andrew Pinski
f94363d720 2012-08-19 Andrew Pinski <apinski@cavium.com> 
* mips-tdep.c (is_octeon): New function.
	(is_octeon_bbit_op): New function.
	(mips32_next_pc): Handle Octeon's bbit instructions.
	(mips32_instruction_has_delay_slot): Likewise.

012-08-19  Andrew Pinski  <apinski@cavium.com>

        * gdb.arch/mips-octeon-bbit.c: New file.
        * gdb.arch/mips-octeon-bbit.exp: New Test.
 2012-08-19 22:22:49 +00:00
Andrew Pinski
78a59c2fea 2012-08-19 Andrew Pinski <apinski@cavium.com> 
* mips-tdep.c (mips32_next_pc): Fix line spacing of the comment
	before the function.
 2012-08-19 22:21:21 +00:00
Andrew Pinski
4f5bcb5090 2012-08-19 Andrew Pinski <apinski@cavium.com> 
* mips-tdep.c (mips32_next_pc): Consolidate calls to itype_op.
 2012-08-19 22:20:29 +00:00
Yao Qi
ccce17b060 gdb/ 
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
	(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
	* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
	(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
	(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* frame.c (frame_debug): Add 'unsigned'.
	(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* frame.h: Update the declaration of 'frame_debug'.
	* gdbtypes.c (overload_debug): Add 'unsigned'.
	(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* inferior.h: Update declaration of 'debug_infrun'.
	* infrun.c (debug_infrun): Add 'unsigned'.
	(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* jit.c (jit_debug): Add 'unsigned'.
	(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* linux-nat.c (debug_linux_nat): Add 'unsigned'.
	(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
	(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* machoread.c (mach_o_debug_level): Add 'unsigned'.
	(_initialize_machoread): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
	* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
	(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
	intead of add_setshow_zinteger_cmd.
	* mips-tdep.c (mips_debug): Add 'unsigned'.
	(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* monitor.c (monitor_debug): Add 'unsigned'.
	(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* observer.c (observer_debug): Add 'unsigned'.
	(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* parse.c (expressiondebug): Add 'unsigned'.
	(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* record.c (record_debug): Add 'unsigned'.
	(_initialize_record): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* record.h: Update the declaration of 'record_debug'.
	* stap-probe.c (stap_expression_debug): Add 'unsigned'.
	(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* serial.c (global_serial_debug_p): Add 'unsigned'.
	(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
	(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* solib-frv.c (solib_frv_debug): Add 'unsigned'.
	(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* target.c (targetdebug): Add 'unsigned'.
	(initialize_targets): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* valops.c (overload_debug): Add 'unsigned'.
	* varobj.c (varobjdebug): Add 'unsigned'.
	(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
	(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.

	* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
	* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
	(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* gdbarch.c, gdbarch.h: Re-generated.
 2012-08-02 09:36:40 +00:00
Maciej W. Rozycki
2e81047f91 * mips-tdep.c (mips_push_dummy_code): Handle microMIPS code. 2012-06-11 10:11:14 +00:00
Maciej W. Rozycki
6a00aa1e22 * mips-tdep.c (mips_pseudo_register_type): Remove tdep local 
variable.
	(mips_eabi_push_dummy_call): Likewise.
	(mips_n32n64_push_dummy_call): Likewise.
	(mips_o32_push_dummy_call): Likewise.
	(mips_o64_push_dummy_call): Likewise.
 2012-06-06 21:34:12 +00:00
Maciej W. Rozycki
eaa05d599e * mips-tdep.c (mips_convert_register_p): Correct coding style. 2012-06-06 21:27:37 +00:00
Maciej W. Rozycki
de13fcf2f4 * mips-tdep.c (mips_pseudo_register_type): Use 
mips_float_register_p.
 2012-06-06 19:34:31 +00:00
Maciej W. Rozycki
d467df4e86 * mips-tdep.c (mips_reg3_to_reg): Optimize storage. 2012-05-18 23:53:19 +00:00
Maciej W. Rozycki
4cc0665f24 gdb/ 
* NEWS: Add microMIPS support and "set mips compression",
	"show mips compression" commands.
	* mips-tdep.h (mips_isa): New enum.
	(gdbarch_tdep): Add mips_isa.
	(mips_pc_is_mips16): Update prototype.
	(mips_pc_is_mips, mips_pc_is_micromips): New prototypes.
	* mips-tdep.c (mips_compression_mips16): New variable.
	(mips_compression_micromips): Likewise.
	(mips_compression_strings): Likewise.
	(mips_compression_string): Likewise.
	(is_mips16_isa, is_micromips_isa): New functions.
	(is_mips16_addr): Rename to...
	(is_compact_addr): ... this.
	(unmake_mips16_addr): Likewise to...
	(unmake_compact_addr): ... this.
	(make_mips16_addr): Likewise to...
	(make_compact_addr): ... this.
	(is_mips_addr, is_mips16_addr, is_micromips_addr): New
	functions.
	(mips_elf_make_msymbol_special): Handle microMIPS code.
	(msymbol_is_special): Rename to...
	(msymbol_is_mips16): ... this.
	(mips_make_symbol_special, mips_pc_is_mips16): Update
	accordingly.
	(msymbol_is_mips, msymbol_is_micromips): New functions.
	(mips16_to_32_reg): Rename to...
	(mips_reg3_to_reg): ... this.
	(mips_pc_is_mips, mips_pc_is_micromips): New functions.
	(mips_pc_isa): Likewise.
	(mips_read_pc, mips_unwind_pc, mips_write_pc): Handle microMIPS
	code.
	(mips_fetch_instruction): Pass return status instead of printing
	an error message if requested.  Handle microMIPS code.  Bail out
	on an invalid ISA.
	(micromips_op): New macro.
	(b0s4_imm, b0s5_imm, b0s5_reg, b0s7_imm, b0s10_imm): Likewise.
	(b1s9_imm, b2s3_cc, b4s2_regl, b5s5_op, b5s5_reg): Likewise.
	(b6s4_op, b7s3_reg): Likewise.
	(b0s6_op, b0s11_op, b0s12_imm, b0s16_imm, b0s26_imm): Likewise.
	(b6s10_ext, b11s5_reg, b12s4_op): Likewise.
	(mips_insn_size): New function.
	(mips32_next_pc): Update mips_fetch_instruction call.
	(micromips_relative_offset7): New function.
	(micromips_relative_offset10): Likewise.
	(micromips_relative_offset16): Likewise.
	(micromips_pc_insn_size): Likewise.
	(micromips_bc1_pc): Likewise.
	(micromips_next_pc): Likewise.
	(unpack_mips16): Update mips_fetch_instruction call.
	(extended_mips16_next_pc): Update according to change to
	mips16_to_32_reg.
	(mips_next_pc): Update mips_pc_is_mips16 call.  Handle microMIPS
	code.
	(mips16_scan_prologue): Update mips_fetch_instruction call.
	Update according to change to mips16_to_32_reg.
	(mips_insn16_frame_sniffer): Update mips_pc_is_mips16 call.
	(mips_insn16_frame_base_sniffer): Likewise.
	(micromips_decode_imm9): New function.
	(micromips_scan_prologue): Likewise.
	(mips_micro_frame_cache): Likewise.
	(mips_micro_frame_this_id): Likewise.
	(mips_micro_frame_prev_register): Likewise.
	(mips_micro_frame_sniffer): Likewise.
	(mips_micro_frame_unwind): New variable.
	(mips_micro_frame_base_address): New function.
	(mips_micro_frame_base): New variable.
	(mips_micro_frame_base_sniffer): New function.
	(mips32_scan_prologue): Update mips_fetch_instruction call.
	(mips_insn32_frame_sniffer): Check for the standard MIPS ISA
	rather than for MIPS16.
	(mips_insn32_frame_base_sniffer): Likewise.
	(mips_addr_bits_remove): Handle microMIPS code.
	(deal_with_atomic_sequence): Rename to...
	(mips_deal_with_atomic_sequence): ... this.  Update the type
	of the variable used to hold an instruction.  Remove the ISA bit
	check.  Update mips_fetch_instruction call.
	(micromips_deal_with_atomic_sequence): New function.
	(deal_with_atomic_sequence): Likewise.
	(mips_about_to_return): Handle microMIPS code.  Update
	mips_fetch_instruction call.
	(heuristic_proc_start): Check for the standard MIPS ISA rather
	than for MIPS16.  Update mips_pc_is_mips16 and
	mips_fetch_instruction calls.  Handle microMIPS code.
	(mips_push_dummy_code): Handle microMIPS code.
	(mips_eabi_push_dummy_call): Likewise.
	(mips_o32_return_value): Update mips_pc_is_mips16 call.
	(mips_o64_push_dummy_call): Handle microMIPS code.
	(mips_o64_return_value): Update mips_pc_is_mips16 call.
	(is_delayed): Remove function.
	(mips_single_step_through_delay): Replace the call to is_delayed
	with mips32_instruction_has_delay_slot.  Correct MIPS16 handling.
	Handle microMIPS code.
	(mips_skip_prologue): Update mips_pc_is_mips16 call.  Handle
	microMIPS code.
	(mips32_in_function_epilogue_p): Update mips_fetch_instruction
	call.
	(micromips_in_function_epilogue_p): New function.
	(mips16_in_function_epilogue_p): Update mips_fetch_instruction
	call.
	(mips_in_function_epilogue_p): Update mips_pc_is_mips16 call.
	Handle microMIPS.
	(gdb_print_insn_mips): Likewise.
	(mips_breakpoint_from_pc): Likewise.
	(mips_remote_breakpoint_from_pc): New function.
	(mips32_instruction_has_delay_slot): Simplify making use of the
	updated mips_fetch_instruction interface.
	(micromips_instruction_has_delay_slot): New function.
	(mips16_instruction_has_delay_slot): Simplify making use of the
	updated mips_fetch_instruction interface.
	(mips_adjust_breakpoint_address): Check for the standard MIPS
	ISA rather than for MIPS16 ISA.  Update for unmake_compact_addr
	calls.  Handle microMIPS code.
	(mips_get_mips16_fn_stub_pc): Update mips_fetch_instruction call.
	(mips_skip_trampoline_code): Handle microMIPS code.
	(global_mips_compression): New function.
	(mips_gdbarch_init): Handle the compressed ISA setting from ELF
	file flags.  Register the microMIPS remote breakpoint handler
	and heuristic frame unwinder.
	(show_mips_compression): New function.
	(_initialize_mips_tdep): Add the "set mips compression" and
	"show mips compression" commands.

	gdb/doc/
	* gdb.texinfo (MIPS): Document "set mips compression" and "show
	mips compression".
	(MIPS Breakpoint Kinds): New subsubsection.
 2012-05-18 23:46:40 +00:00
Sergio Durigan Junior
22e048c9dd 2012-05-18 Sergio Durigan Junior <sergiodj@redhat.com> 
* ada-lang.c:
	* ada-tasks.c:
	* ada-varobj.c:
	* amd64-darwin-tdep.c:
	* arm-symbian-tdep.c:
	* arm-tdep.c:
	* avr-tdep.c:
	* ax-gdb.c:
	* bfin-linux-tdep.c:
	* breakpoint.c:
	* c-valprint.c:
	* cli/cli-cmds.c:
	* coffread.c:
	* cp-support.c:
	* cris-tdep.c:
	* dwarf2-frame-tailcall.c:
	* dwarf2-frame.c:
	* dwarf2expr.c:
	* dwarf2loc.c:
	* dwarf2read.c:
	* elfread.c:
	* eval.c:
	* expprint.c:
	* f-valprint.c:
	* frv-tdep.c:
	* h8300-tdep.c:
	* hppa-hpux-tdep.c:
	* hppa-tdep.c:
	* hppanbsd-tdep.c:
	* i386-nto-tdep.c:
	* i386-tdep.c:
	* i387-tdep.c:
	* ia64-tdep.c:
	* jit.c:
	* linespec.c:
	* linux-tdep.c:
	* lm32-tdep.c:
	* m2-valprint.c:
	* m32c-tdep.c:
	* m32r-rom.c:
	* m32r-tdep.c:
	* m68k-tdep.c:
	* m68klinux-tdep.c:
	* mi/mi-main.c:
	* microblaze-tdep.c:
	* mips-linux-tdep.c:
	* mips-tdep.c:
	* mn10300-tdep.c:
	* p-valprint.c:
	* parse.c:
	* ppc-linux-tdep.c:
	* ppc-sysv-tdep.c:
	* printcmd.c:
	* python/py-finishbreakpoint.c:
	* python/py-inferior.c:
	* python/py-infthread.c:
	* python/py-type.c:
	* python/python.c:
	* remote-fileio.c:
	* remote-m32r-sdi.c:
	* remote-mips.c:
	* reverse.c:
	* rl78-tdep.c:
	* rs6000-aix-tdep.c:
	* rs6000-tdep.c:
	* s390-tdep.c:
	* score-tdep.c:
	* sh64-tdep.c:
	* skip.c:
	* solib-darwin.c:
	* solib-dsbt.c:
	* solib-frv.c:
	* sparc-tdep.c:
	* spu-multiarch.c:
	* spu-tdep.c:
	* stack.c:
	* symfile.c:
	* symtab.c:
	* tic6x-tdep.c:
	* tracepoint.c:
	* v850-tdep.c:
	* valarith.c:
	* valprint.c:
	* value.c:
	* xcoffread.c:
	* xtensa-tdep.c:
	* ada-lang.c:
	* ada-tasks.c:
	* ada-varobj.c:
	* amd64-darwin-tdep.c:
	* arm-symbian-tdep.c:
	* arm-tdep.c: Delete unused variables.
 2012-05-18 21:02:52 +00:00
Maciej W. Rozycki
5a4398495b * mips-tdep.h (mips_write_pc): New prototype. 
* mips-tdep.c (mips_write_pc): Make external, add description.
	* mips-linux-tdep.c (mips_linux_write_pc): Use mips_write_pc,
	add description.
 2012-05-18 12:43:05 +00:00
Maciej W. Rozycki
8376de048f * mips-tdep.c (mips_read_pc): Use gdbarch_pc_regnum instead of 
mips_regnum->pc.
	(mips_unwind_pc, mips_write_pc): Likewise.
	(mips_gdbarch_init): Remove a comment on gdbarch_pc_regnum and
	gdbarch_read_pc.
 2012-05-18 12:30:26 +00:00
Maciej W. Rozycki
6a3a010ba6 gdb/ 
* breakpoint.h (bp_location): Add related_address member.
	* inferior.h (get_return_value): Take a pointer to struct value
	instead of struct type for the function requested.
	* value.h (using_struct_return): Likewise.
	* gdbarch.sh (return_value): Take a pointer to struct value
	instead of struct type for the function requested.
	* breakpoint.c (set_breakpoint_location_function): Initialize
	related_address for bp_gnu_ifunc_resolver breakpoints.
	* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
	requested function's address to gdbarch_return_value.
	* eval.c (evaluate_subexp_standard): Pass the requested
	function's address to using_struct_return.
	* infcall.c (call_function_by_hand): Pass the requested
	function's address to using_struct_return and
	gdbarch_return_value.
	* infcmd.c (get_return_value): Take a pointer to struct value
	instead of struct type for the function requested.
	(print_return_value): Update accordingly.
	(finish_command_continuation): Likewise.
	* stack.c (return_command): Pass the requested function's
	address to using_struct_return and gdbarch_return_value.
	* value.c (using_struct_return): Take a pointer to struct value
	instead of struct type for the function requested.  Pass the
	requested function's address to gdbarch_return_value.
	* python/py-finishbreakpoint.c (finish_breakpoint_object):
	New function_value member, replacing function_type.
	(bpfinishpy_dealloc): Update accordingly.
	(bpfinishpy_pre_stop_hook): Likewise.
	(bpfinishpy_init): Likewise.  Record the requested function's
	address.
	* mips-tdep.c (mips_fval_reg): New enum.
	(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
	words put in GP registers.
	(mips_o64_push_dummy_call): Update a comment.
	(mips_o32_return_value): Take a pointer to struct value instead
	of struct type for the function requested and use it to check if
	using the MIPS16 calling convention.  Return the designated
	general purpose registers for floating-point values returned in
	MIPS16 mode.
	(mips_o64_return_value): Likewise.
	* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
	(ppc_sysv_abi_broken_return_value): Likewise.
	(ppc64_sysv_abi_return_value): Likewise.
	* alpha-tdep.c (alpha_return_value): Take a pointer to struct
	value instead of struct type for the function requested.
	* amd64-tdep.c (amd64_return_value): Likewise.
	* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
	* arm-tdep.c (arm_return_value): Likewise.
	* avr-tdep.c (avr_return_value): Likewise.
	* bfin-tdep.c (bfin_return_value): Likewise.
	* cris-tdep.c (cris_return_value): Likewise.
	* frv-tdep.c (frv_return_value): Likewise.
	* h8300-tdep.c (h8300_return_value): Likewise.
	(h8300h_return_value): Likewise.
	* hppa-tdep.c (hppa32_return_value): Likewise.
	(hppa64_return_value): Likewise.
	* i386-tdep.c (i386_return_value): Likewise.
	* ia64-tdep.c (ia64_return_value): Likewise.
	* iq2000-tdep.c (iq2000_return_value): Likewise.
	* lm32-tdep.c (lm32_return_value): Likewise.
	* m32c-tdep.c (m32c_return_value): Likewise.
	* m32r-tdep.c (m32r_return_value): Likewise.
	* m68hc11-tdep.c (m68hc11_return_value): Likewise.
	* m68k-tdep.c (m68k_return_value): Likewise.
	(m68k_svr4_return_value): Likewise.
	* m88k-tdep.c (m88k_return_value): Likewise.
	* mep-tdep.c (mep_return_value): Likewise.
	* microblaze-tdep.c (microblaze_return_value): Likewise.
	* mn10300-tdep.c (mn10300_return_value): Likewise.
	* moxie-tdep.c (moxie_return_value): Likewise.
	* mt-tdep.c (mt_return_value): Likewise.
	* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
	* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
	(ppc_sysv_abi_broken_return_value): Likewise.
	(ppc64_sysv_abi_return_value): Likewise.
	* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
	* rl78-tdep.c (rl78_return_value): Likewise.
	* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
	* rx-tdep.c (rx_return_value): Likewise.
	* s390-tdep.c (s390_return_value): Likewise.
	* score-tdep.c (score_return_value): Likewise.
	* sh-tdep.c (sh_return_value_nofpu): Likewise.
	(sh_return_value_fpu): Likewise.
	* sh64-tdep.c (sh64_return_value): Likewise.
	* sparc-tdep.c (sparc32_return_value): Likewise.
	* sparc64-tdep.c (sparc64_return_value): Likewise.
	* spu-tdep.c (spu_return_value): Likewise.
	* tic6x-tdep.c (tic6x_return_value): Likewise.
	* v850-tdep.c (v850_return_value): Likewise.
	* vax-tdep.c (vax_return_value): Likewise.
	* xstormy16-tdep.c (xstormy16_return_value): Likewise.
	* xtensa-tdep.c (xtensa_return_value): Likewise.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

	gdb/testsuite/
	* gdb.base/return-nodebug.exp: Also test float and double types.
 2012-05-16 14:35:09 +00:00
Maciej W. Rozycki
8ae38c14cc * mips-tdep.c (mips_push_dummy_code): Correct description typo. 2012-05-14 09:32:03 +00:00
Joel Brobecker
2c76a0c7f1 mips: Switch inferior function calls to ON_STACK method. 
This patch switches the mips code to use the ON_STACK method
for function calls instead of AT_SYMBOL, which we want to remove.

gdb/ChangeLog:

        * mips-tdep.c (mips_push_dummy_code): New function.
        (mips_gdbarch_init): Set the gdbarch call_dummy_location to
        ON_STACK and install mips_push_dummy_code as our gdbarch
        push_dummy_code routine.
 2012-05-09 14:29:02 +00:00
Maciej W. Rozycki
14132e8924 gdb/ 
* infrun.c (handle_inferior_event): Move the check for return
	trampolines ahead of the check for function trampolines.
	* mips-tdep.h (MIPS_S2_REGNUM, MIPS_GP_REGNUM): New macros.
	* mips-tdep.c (mips_str_mips16_call_stub): New variable.
	(mips_str_mips16_ret_stub): Likewise.
	(mips_str_call_fp_stub): Likewise.
	(mips_str_call_stub): Likewise.
	(mips_str_fn_stub): Likewise.
	(mips_str_pic): Likewise.
	(mips_in_frame_stub): New function.
	(mips_unwind_pc): Return the return address rather than the PC
	if the PC of an intermediate frame is inside a call thunk.
	(mips_is_stub_suffix): New function.
	(mips_is_stub_mode): Likewise.
	(mips_get_mips16_fn_stub_pc): Likewise.
	(mips_skip_mips16_trampoline_code): Update to handle all the
	currently generated stub types.  Don't recurse into __fn_stub
	thunks.  Remove heuristics to handle stubs beyond etext/_etext.
	Use cooked register accesses.
	(mips_in_return_stub): Reintroduce function.
	(mips_skip_trampoline_code): Traverse trampolines recursively.
	(mips_gdbarch_init): Handle MIPS16 return trampolines.

	gdb/testsuite/
	* gdb.arch/mips16-thunks-inmain.c: New file.
	* gdb.arch/mips16-thunks-main.c: New file.
	* gdb.arch/mips16-thunks-sin.c: New file.
	* gdb.arch/mips16-thunks-sinfrob.c: New file.
	* gdb.arch/mips16-thunks-sinfrob16.c: New file.
	* gdb.arch/mips16-thunks-sinmain.c: New file.
	* gdb.arch/mips16-thunks-sinmips16.c: New file.
	* gdb.arch/mips16-thunks.exp: New file.
 2012-04-26 16:56:18 +00:00
Maciej W. Rozycki
6321c22a8c * mips-tdep.c (mips_about_to_return): Remove dead MIPS16 support 
code.  Handle JR.HB correctly.
 2012-04-24 19:56:02 +00:00
Maciej W. Rozycki
742c84f629 * mips-tdep.c 
(is_mips16_addr, unmake_mips16_addr, make_mips16_addr): Group
	with the other MIPS16 helpers.
 2012-04-24 19:44:16 +00:00
Maciej W. Rozycki
dca9aa3ad4 * mips-tdep.c (mips_n32n64_return_value): Fix coding style. 
(mips_o32_return_value): Likewise.
	(mips_o64_return_value): Likewise.
 2012-04-23 16:00:19 +00:00
Maciej W. Rozycki
004159a2dc * mips-tdep.c (mips_float_register_p): New function. 
(mips_convert_register_float_case_p): Use mips_float_register_p.
	(mips_register_type): Likewise.
	(mips_print_register): Likewise.
	(print_gp_register_row): Likewise.
	(mips_print_registers_info): Likewise.
 2012-04-20 23:31:39 +00:00
Maciej W. Rozycki
7f0e6aaed2 * mips-tdep.c (mips_elf_make_msymbol_special): Fix identification 
of mips16 symbols.
 2012-04-20 23:01:51 +00:00
Maciej W. Rozycki
34b192ce9c * mips-tdep.c (mips_skip_pic_trampoline_code): Correct sign 
extension in jump target calculation.
 2012-04-10 23:06:57 +00:00
Maciej W. Rozycki
9e8da49c01 * mips-tdep.c (mips32_next_pc): Handle JALX. 2012-04-10 22:54:24 +00:00
Joel Brobecker
44099a67be Fix ARI violations in mips-linux-nat.c and mips-tdep.c 
gdb/ChangeLog:

        * mips-linux-nat.c (mips_linux_read_description): Add missing i18n
        marker.
        * mips-tdep.c (mips_linux_reg_names): Improve comment to avoid ARI
        violation.
 2012-03-02 19:14:30 +00:00
Maciej W. Rozycki
1908093124 * mips-tdep.c (mips32_scan_prologue): Correct indentation. 2012-03-01 23:35:46 +00:00
Maciej W. Rozycki
9aac7884c5 * mips-tdep.c (mips_gdbarch_init): Only set pc_regnum and 
sp_regnum once the gdbarch_init_osabi hook has been called.
 2012-03-01 22:52:03 +00:00
Maciej W. Rozycki
a385295e2c * mips-tdep.c (mips32_bc1_pc): New function. 
(mips32_next_pc): Handle BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T,
	BPOSGE32 and BPOSGE64 instructions.
	(deal_with_atomic_sequence): Likewise.
	(mips32_instruction_has_delay_slot): Likewise.
 2012-03-01 22:37:51 +00:00
Maciej W. Rozycki
1faeff088b gdb/ 
* features/mips-dsp.xml: New file.
	* features/mips64-dsp.xml: New file.
	* features/mips-dsp-linux.xml: New file.
	* features/mips64-dsp-linux.xml: New file.
	* features/Makefile (WHICH): Add mips-dsp-linux and
	mips64-dsp-linux.
	(mips-dsp-expedite, mips64-dsp-expedite): New variables.
	* features/mips-dsp-linux.c: New file.
	* features/mips64-dsp-linux.c: New file.
	* regformats/mips-dsp-linux.dat: New file.
	* regformats/mips64-dsp-linux.dat: New file.
	* mips-linux-nat.c (mips_linux_register_addr): Handle DSP
	registers.
	(mips64_linux_register_addr): Likewise.
	(mips64_linux_regsets_fetch_registers): Likewise.
	(mips64_linux_regsets_store_registers): Likewise.
	(mips64_linux_fetch_registers): Update call to
	mips64_linux_regsets_fetch_registers.
	(mips64_linux_store_registers): Update call to
	mips64_linux_regsets_store_registers.
	(mips_linux_read_description): Probe for DSP registers.
	(_initialize_mips_linux_nat): Call initialize_tdesc_mips_dsp_linux
	and initialize_tdesc_mips64_dsp_linux.
	* mips-linux-tdep.c (supply_gregset, mips64_supply_gregset):
	Remove padding of no longer used embedded register slots.
	* mips-linux-tdep.h (DSP_BASE, DSP_CONTROL): New macros.
	(MIPS_RESTART_REGNUM): Redefine enum value.
	* mips-tdep.c (mips_generic_reg_names): Remove trailing null
	strings.
	(mips_tx39_reg_names): Likewise.
	(mips_linux_reg_names): New array of register names for Linux
	targets.
	(mips_register_name): Check for a null pointer in
	mips_processor_reg_names and return an empty string.
	(mips_register_type): Exclude embedded registers for the IRIX
	and Linux ABIs.
	(mips_pseudo_register_type): Likewise.  Use dynamic numbers to
	refer to FP registers, LO, HI, BadVAddr, Cause and PC.  Handle
	DSP registers.
	(mips_stab_reg_to_regnum): Handle DSP accumulators.
	(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
	(mips_gdbarch_init): Likewise.  Initialize internal register
	indices for the Linux ABI.  Use dynamic numbers to refer to
	registers, as applicable, while parsing the target description.
	* mips-tdep.h (struct mips_regnum): Add dspacc/dspctl offsets.

	gdb/doc/
	* gdb.texinfo (MIPS Features): Add org.gnu.gdb.mips.dsp.

	gdb/gdbserver/
	* linux-low.h (linux_target_ops): Add regset_bitmap member.
	* linux-low.c (use_linux_regsets): New macro.
	[!HAVE_LINUX_REGSETS] (regsets_fetch_inferior_registers): Likewise.
	[!HAVE_LINUX_REGSETS] (regsets_store_inferior_registers): Likewise.
	(linux_register_in_regsets): New function.
	(usr_fetch_inferior_registers): Skip registers covered by
	regsets.
	(usr_store_inferior_registers): Likewise.
	(usr_fetch_inferior_registers): New macro.
	(usr_store_inferior_registers): Likewise.
	(linux_fetch_registers): Handle mixed regset/non-regset targets.
	(linux_store_registers): Likewise.
	* linux-mips-low.c (init_registers_mips_dsp_linux): New
	prototype.
	(init_registers_mips64_dsp_linux): Likewise.
	(init_registers_mips_linux): New macro.
	(init_registers_mips_dsp_linux): Likewise.
	(mips_dsp_num_regs): Likewise.
	(DSP_BASE, DSP_CONTROL): New fallback macros.
	(mips_base_regs): New macro.
	(mips_regmap): Use it.  Fix the size.
	(mips_dsp_regmap): New variable.
	(mips_dsp_regset_bitmap): Likewise.
	(mips_arch_setup): New function.
	(mips_cannot_fetch_register): Use the_low_target.regmap rather
	than mips_regmap.
	(mips_cannot_store_register): Likewise.
	(the_low_target): Update .arch_setup, .num_regs and .regmap
	initializers.  Add .regset_bitmap initializer.
	* linux-arm-low.c (the_low_target): Add .regset_bitmap
	initializer.
	* linux-bfin-low.c (the_low_target): Likewise.
	* linux-cris-low.c (the_low_target): Likewise.
	* linux-crisv32-low.c (the_low_target): Likewise.
	* linux-ia64-low.c (the_low_target): Likewise.
	* linux-m32r-low.c (the_low_target): Likewise.
	* linux-m68k-low.c (the_low_target): Likewise.
	* linux-ppc-low.c (the_low_target): Likewise.
	* linux-s390-low.c (the_low_target): Likewise.
	* linux-sh-low.c (the_low_target): Likewise.
	* linux-sparc-low.c (the_low_target): Likewise.
	* linux-tic6x-low.c (the_low_target): Likewise.
	* linux-x86-low.c (the_low_target): Likewise.
	* linux-xtensa-low.c (the_low_target): Likewise.
	* configure.srv <mips*-*-linux*>: Add mips-dsp-linux.o and
	mips64-dsp-linux.o to srv_regobj.  Add mips-dsp-linux.xml,
	mips64-dsp-linux.xml, mips-dsp.xml and mips64-dsp.xml to
	srv_xmlfiles.
	* Makefile.in (mips-dsp-linux.o, mips-dsp-linux.c): New targets.
	(mips64-dsp-linux.o, mips64-dsp-linux.c): Likewise.

	gdb/testsuite/
	* gdb.xml/tdesc-regs.exp: Add "mips-dsp.xml" to the list of MIPS
	core registers.
 2012-03-01 22:19:48 +00:00
Maciej W. Rozycki
c8cef75f3f * mips-tdep.c (mips32_instruction_has_delay_slot): New function. 
(mips16_instruction_has_delay_slot): Likewise.
	(mips_segment_boundary): Likewise.
	(mips_adjust_breakpoint_address): Likewise.
	(mips_gdbarch_init): Use mips_adjust_breakpoint_address.
 2012-02-27 23:05:40 +00:00
Doug Evans
2c02bd7290 * blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of 
"name" parameter to const char ** from char **.  All callers updated.
	(find_pc_partial_function): Ditto.
	(cache_pc_function_name): Change type to const char * from char *.
	* symtab.h ((find_pc_partial_function_gnu_ifunc): Update.
	(find_pc_partial_function): Update.
	* alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change
	type of "name" parameter to const char * from char *.
	All uses updated.
	* arch-utils.c (generic_in_solib_return_trampoline): Change
	type of "name" parameter to const char * from char *.
	* arch-utils.h (generic_in_solib_return_trampoline): Update.
	* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change
	type of "name" parameter to const char * from char *.
	* gdbarch.sh (in_solib_return_trampoline): Ditto.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.
	* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update.
	* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update.
	* m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change
	type of "name" parameter to const char * from char *.
	* skip.c (skip_function_pc): Ditto.
	* sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto.
	* sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update.
	* sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto.
	* sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto.
	* sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto.
	* sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto.
	* sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto.
	* nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name".
	* nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
 2012-02-02 20:19:17 +00:00
Jan Kratochvil
4047852192 gdb/ 
Code cleanup: Make 1440 bytes of data segment read-only.
	* arch-utils.c (endian_enum): Make it const char *const [].
	* arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
	Likewise.
	* breakpoint.c (always_inserted_enums): Likewise.
	* cli/cli-cmds.c (script_ext_enums): Likewise.
	* cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
	enumlist parameter const char *const *.
	* cli/cli-decode.h (struct cmd_list_element): Make the enums field
	const char *const *.
	* command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
	parameter const char *const *.
	* cris-tdep.c (cris_modes): Make it const char *const [].
	* filesystem.c (target_file_system_kinds): Likewise.
	* i386-tdep.c (valid_flavors, valid_conventions): Likewise.
	* infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
	(can_use_displaced_stepping_enum, scheduler_enums)
	(exec_direction_names): Likewise.
	* language.c (_initialize_language): Make the type_or_range_names and
	case_sensitive_names variables const char *const [].
	* mips-tdep.c (mips_abi_strings): Make it const char *const [].
	* python/python.c (python_excp_enums): Likewise.
	* remote.c (interrupt_sequence_modes): Likewise.
	* rs6000-tdep.c (powerpc_vector_strings): Likewise.
	* serial.c (logbase_enums): Likewise.
	* sh-tdep.c (sh_cc_enum): Likewise.
	* stack.c (print_frame_arguments_choices, print_entry_values_choices):
	Likewise.
	* symtab.c (multiple_symbols_modes): Likewise.
	* tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
	Likewise.
	* utils.c (internal_problem_modes): Likewise.
 2012-01-28 18:08:22 +00:00
Joel Brobecker
0b30217134 Copyright year update in most files of the GDB Project. 
gdb/ChangeLog:

        Copyright year update in most files of the GDB Project.
 2012-01-04 08:17:56 +00:00
Maciej W. Rozycki
280711e76c * mips-tdep.c (mips_skip_mips16_trampoline_code): Sign-extend 
address chunks retrieved from decoded lui/addiu pairs.
 2011-12-08 19:03:24 +00:00
Maciej W. Rozycki
4c2051c6c9 * mips-tdep.c (extended_offset): Correct calculation. 
(unpack_mips16): Correct bitfield positions used for extraction
	of the immediate argument; fix sign-extension of same.
	(extended_mips16_next_pc): Correct B instruction's offset
	calculation.  Correct register decoding of the BEQZ and BNEZ
	as well as jump-register instructions.  Handle compact jumps.
 2011-12-08 18:55:48 +00:00
Maciej W. Rozycki
5436df9582 * mips-tdep.c (mips32_scan_prologue): Only update the immediate 
load adjustment if still within the prologue.
 2011-12-07 00:17:23 +00:00
Maciej W. Rozycki
040dff2af8 * mips-tdep.c (mips32_next_pc): Fix floating point condition 
code mask.
 2011-12-06 23:49:56 +00:00
Maciej W. Rozycki
754d7c7860 * mips-tdep.c (deal_with_atomic_sequence): Fix the handling 
of BLTZ* and BGEZ* instructions.
 2011-12-06 23:36:58 +00:00
Maciej W. Rozycki
91912e4d08 * mips-tdep.c (mips_pc_is_mips16): Reverse the order of checks 
performed to determine whether an address refers to standard
	MIPS or MIPS16 code.
	(mips16_next_pc): Use mips_pc_is_mips16 instead of
	is_mips16_addr.
 2011-12-06 23:19:43 +00:00
Maciej W. Rozycki
130854dfe4 * mips-tdep.c (extended_offset): Fix formatting. 2011-11-24 15:56:25 +00:00
Pedro Alves
8fbca658f0 gdb/ 
* frame.c (frame_unwind_register): Throw an error if unwinding the
	register failed.
	* get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
	an unwind stop reason.
	(frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
	* frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
	UNWIND_UNAVAILABLE>: New.
	* inline-frame.c (inline_frame_unwind): Install
	default_frame_unwind_stop_reason.
	* frame-unwind.c: Include "exceptions.h".
	(frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
	(default_frame_unwind_stop_reason): New.
	* frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
	(default_frame_unwind_stop_reason): Declare.
	(struct frame_unwind) <stop_reason>: New function pointer.

	* dummy-frame.c: Install default_frame_unwind_stop_reason.
	* dwarf2-frame.c: Include exceptions.h.
	(struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
	(dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
	computing the CFA.  If such an error was thrown, set
	unavailable_retaddr.
	(dwarf2_frame_unwind_stop_reason): New.
	(dwarf2_frame_this_id): Don't build a frame id if the CFA was
	unavailable.
	(dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
	(dwarf2_signal_frame_unwind): Ditto.

	* amd64-tdep.c: Include "exceptions.h".
	(struct amd64_frame_cache): New field "base_p".
	(amd64_init_frame_cache): Clear it.
	(amd64_frame_cache_1): New, factored out from amd64_frame_cache.
	Avoid reading registers with functions that throw if the register
	is not necessary to compute the frame base.
	(amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
	swallowing NOT_AVAILABLE_ERROR.
	(amd64_frame_unwind_stop_reason): New.
	(amd64_frame_this_id): Don't build a frame id if the frame base
	was unavailable.
	(amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
	(amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(amd64_sigtramp_frame_unwind_stop_reason): New.
	(amd64_sigtramp_frame_this_id): Don't build a frame id if the
	frame base was unavailable.
	(amd64_sigtramp_frame_unwind): Install
	amd64_sigtramp_frame_unwind_stop_reason.
	(amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(amd64_epilogue_frame_unwind_stop_reason): New.
	(amd64_epilogue_frame_this_id): Don't build a frame id if the
	frame base was unavailable.
	(amd64_epilogue_frame_unwind): Install
	amd64_epilogue_frame_unwind_stop_reason.
	* i386-tdep.c: Include "exceptions.h".
	(struct i386_frame_cache): New field "base_p".
	(i386_init_frame_cache): Clear it.
	(i386_frame_cache_1): New, factored out from amd64_frame_cache.
	Avoid reading registers with functions that throw if the register
	is not necessary to compute the frame base.
	(i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
	swallowing NOT_AVAILABLE_ERROR.
	(i386_frame_unwind_stop_reason): New.
	(i386_frame_this_id): Don't build a frame id if the frame base was
	unavailable.
	(i386_frame_prev_register): Handle unavailable SP.
	(i386_frame_unwind): Install i386_frame_unwind_stop_reason.
	(i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(i386_epilogue_frame_unwind_stop_reason): New.
	(i386_epilogue_frame_this_id): Don't build a frame id if the frame
	base was unavailable.
	(i386_epilogue_frame_unwind): Install
	i386_epilogue_frame_unwind_stop_reason.
	(i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(i386_sigtramp_frame_unwind_stop_reason): New.
	(i386_sigtramp_frame_this_id): Don't build a frame id if the frame
	base was unavailable.
	(i386_sigtramp_frame_unwind): Install
	i386_sigtramp_frame_unwind_stop_reason.
	* sentinel-frame.c (sentinel_frame_prev_register): Use the value
	type's size, not the register's.
	(sentinel_frame_unwind): Install default_frame_unwind_stop_reason.

	* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
	default_frame_unwind_stop_reason.
	* alpha-tdep.c (alpha_sigtramp_frame_unwind)
	(alpha_heuristic_frame_unwind): Ditto.
	* amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
	* arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
	* avr-tdep.c (avr_frame_unwind): Ditto.
	* cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
	Ditto.
	* frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
	* frv-tdep.c (frv_frame_unwind): Ditto.
	* h8300-tdep.c (h8300_frame_unwind): Ditto.
	* hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
	* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
	* hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
	(hppa_stub_frame_unwind): Ditto.
	* i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
	* ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
	(ia64_libunwind_frame_unwind)
	(ia64_libunwind_sigtramp_frame_unwind): Ditto.
	* iq2000-tdep.c (iq2000_frame_unwind): Ditto.
	* lm32-tdep.c (lm32_frame_unwind): Ditto.
	* m32c-tdep.c (m32c_unwind): Ditto.
	* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
	* m32r-tdep.c (m32r_frame_unwind): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
	* m68k-tdep.c (m68k_frame_unwind): Ditto.
	* m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
	* m88k-tdep.c (m88k_frame_unwind): Ditto.
	* mep-tdep.c (mep_frame_unwind): Ditto.
	* microblaze-tdep.c (microblaze_frame_unwind): Ditto.
	* mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
	(mips_stub_frame_unwind): Ditto.
	* mn10300-tdep.c (mn10300_frame_unwind): Ditto.
	* moxie-tdep.c (moxie_frame_unwind): Ditto.
	* mt-tdep.c (mt_frame_unwind): Ditto.
	* ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
	* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
	* rs6000-tdep.c (rs6000_frame_unwind): Ditto.
	* s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
	(s390_sigtramp_frame_unwind): Ditto.
	* score-tdep.c (score_prologue_unwind): Ditto.
	* sh-tdep.c (sh_frame_unwind): Ditto.
	* sh64-tdep.c (sh64_frame_unwind): Ditto.
	* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
	* sparc-tdep.c (sparc32_frame_unwind): Ditto.
	* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
	* sparc64-tdep.c (sparc64_frame_unwind): Ditto.
	* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
	* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
	* sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
	(sparc64obsd_trapframe_unwind): Ditto.
	* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
	* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
	* spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
	* v850-tdep.c (v850_frame_unwind): Ditto.
	* vax-tdep.c (vax_frame_unwind): Ditto.
	* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
	* xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
	* xtensa-tdep.c (xtensa_unwind): Ditto.
 2011-03-18 18:52:32 +00:00
Pedro Alves
8dccd430c9 gdb/ 
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
	returning that the register piece is unavailable/optimized out.
	(write_pieced_value): Handle get_frame_register_bytes returning
	that the register piece is unavailable/optimized out when doing a
	read-modify write of a bitfield.
	* findvar.c (value_from_register): Handle get_frame_register_bytes
	returning that the register piece is unavailable/optimized out.
	* frame.c (get_frame_register_bytes): New parameters `optimizedp'
	and `unavailablep'.  Throw error on bad debug info.  Use
	frame_register instead of frame_register_read, to fill in the new
	arguments.
	* frame.h (get_frame_register_bytes): New parameters `optimizedp'
	and `unavailablep'.
	* valops.c: (value_assign): Adjust, and handle
	get_frame_register_bytes failing.
	* spu-tdep.c: Include exceptions.h.
	(spu_software_single_step): Adjust, and handle
	get_frame_register_bytes failing.
	(spu_get_longjmp_target): Ditto.
	* gdbarch.sh (register_to_value): Change to return int.  New
	parameters `optimizedp' and `unavailablep'.
	* gdbarch.h, gdbarch.c: Regenerate.
	* i386-tdep.c (i386_register_to_value): Adjust to new
	gdbarch_register_to_value interface.
	* i387-tdep.c (i387_register_to_value): Ditto.
	* i387-tdep.h (i387_register_to_value): Ditto.
	* alpha-tdep.c (alpha_register_to_value): Ditto.
	* ia64-tdep.c (ia64_register_to_value): Ditto.
	* m68k-tdep.c (m68k_register_to_value): Ditto.
	* mips-tdep.c (mips_register_to_value): Ditto.
	* rs6000-tdep.c (rs6000_register_to_value): Ditto.
 2011-03-18 18:42:41 +00:00
Pedro Alves
05d1431c1e gdb/ 
* regcache.h (regcache_raw_read, regcache_raw_read_signed)
	(regcache_raw_read_unsigned, regcache_raw_read_signed)
	(regcache_raw_read_unsigned, regcache_raw_read_part)
	(regcache_cooked_read, regcache_cooked_read_signed)
	(regcache_cooked_read_unsigned, regcache_cooked_read_part)
	(regcache_cooked_read_ftype): Change return to enum
	register_status.
	* regcache.c: Include exceptions.h
	(regcache_save): Adjust to handle REG_UNAVAILABLE registers.
	(do_cooked_read): Change return to enum register_status.  Always
	forward to regcache_cooked_read.
	(regcache_raw_read): Change return to enum register_status.  If
	the register is not REG_VALID, memset the buffer.  Return the
	register's status.
	(regcache_raw_read_signed): Handle non-REG_VALID registers and
	return the register's status.
	(regcache_raw_read_unsigned): Ditto.
	(regcache_cooked_read): Change return to enum register_status.
	Assert that with read-only regcaches, the register's status must
	be known.  If the regcache is read-only, and the register is not
	REG_VALID, memset the buffer.  Return the register's status.
	(regcache_cooked_read_signed): Change return to enum
	register_status.  Handle non-REG_VALID registers and return the
	register's status.
	(regcache_cooked_read_unsigned): Change return to enum
	register_status.  Handle non-REG_VALID registers and return the
	register's status.
	(regcache_xfer_part, regcache_raw_read_part)
	(regcache_cooked_read_part): Change return to enum
	register_status.  Return the register's status.
	(regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
	unavailable.
	(regcache_dump): Handle unavailable cooked registers.
	* frame.c (do_frame_register_read): Adjust interface to match
	regcache_cooked_read_ftype.
	* gdbarch.sh (pseudo_register_read): Change return to enum
	register_status.
	* gdbarch.h, gdbarch.c: Regenerate.

	* i386-tdep.h (i386_pseudo_register_read): Change return to enum
	register_status.
	* i386-tdep.c (i386_pseudo_register_read): Change return to enum
	register_status.  If reading a raw register indicates the raw
	register is not valid, return the raw register's status,
	otherwise, return REG_VALID.
	* amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
	register_status.  Handle non-REG_VALID raw registers and return
	the register's status.
	* arm-tdep.c (arm_neon_quad_read)
	(arm_pseudo_read): Change return to enum register_status.  Handle
	non-REG_VALID raw registers and return the register's status.
	* avr-tdep.c (avr_pseudo_register_read): Ditto.
	* frv-tdep.c (frv_pseudo_register_read): Ditto.
	* h8300-tdep.c (h8300_pseudo_register_read): Ditto.
	* hppa-tdep.c (hppa_pseudo_register_read): Ditto.
	* m32c-tdep.c (m32c_move_reg_t): Change return to enum
	register_status.
	(m32c_raw_read, m32c_raw_write, m32c_banked_read)
	(m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
	(m32c_part_write, m32c_cat_read, m32c_cat_write)
	(m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
	(m32c_pseudo_register_read): Change return to enum
	register_status.  Adjust.
	* m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
	enum register_status.  Return the register's status.
	* mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
	register_status.  Return the register's status.
	(mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
	* mips-tdep.c (mips_pseudo_register_read): Ditto.
	* mt-tdep.c (mt_pseudo_register_read): Ditto.
	* rs6000-tdep.c (move_ev_register_func): New typedef.
	(e500_move_ev_register): Use it.  Change return to enum
	register_status.  Return the register's status.
	(do_regcache_raw_read): New function.
	(do_regcache_raw_write): New function.
	(e500_pseudo_register_read): Change return to enum
	register_status.  Return the register's status.  Use
	do_regcache_raw_read.
	(e500_pseudo_register_write): Adjust.  Use do_regcache_raw_write.
	(dfp_pseudo_register_read): Change return to enum register_status.
	Return the register's status.
	(vsx_pseudo_register_read): Ditto.
	(efpr_pseudo_register_read): Ditto.
	(rs6000_pseudo_register_read): Ditto.
	* s390-tdep.c (s390_pseudo_register_read): Change return to enum
	register_status.  Return the register's status.
	* sh64-tdep.c (pseudo_register_read_portions): New function.
	(sh64_pseudo_register_read): Change return to enum
	register_status.  Use pseudo_register_read_portions.  Return the
	register's status.
	* ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
	register_status.  Return the register's status.
	* sh-tdep.c (pseudo_register_read_portions): New function.
	(sh_pseudo_register_read): Change return to enum register_status.
	Use pseudo_register_read_portions.  Return the register's status.
	* sparc-tdep.c (sparc32_pseudo_register_read): Change return to
	enum register_status.  Return the register's status.
	* sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
	* spu-tdep.c (spu_pseudo_register_read_spu)
	(spu_pseudo_register_read): Ditto.
	* xtensa-tdep.c (xtensa_register_read_masked)
	(xtensa_pseudo_register_read): Ditto.
	* bfin-tdep.c (bfin_pseudo_register_read): Ditto.
 2011-03-18 18:38:44 +00:00
Michael Snyder
b021a22166 2011-02-25 Michael Snyder <msnyder@vmware.com> 
* arm-tdep.c: Fix typos in comments.
	* bsd-uthread.c: Ditto.
	* completer.c: Ditto.
	* corelow.c: Ditto.
	* cp-namespace.c: Ditto.
	* cp-support.c: Ditto.
	* cris-tdep.c: Ditto.
	* dbxread.c: Ditto.
	* dwarf2read.c: Ditto.
	* frame.h: Ditto.
	* gdbtypes.h: Ditto.
	* inferior.h: Ditto.
	* mdebugread.c: Ditto.
	* mips-tdep.c: Ditto.
	* ppc-linux-nat.c: Ditto.
	* ppc-linux-tdep.c: Ditto.
	* printcmd.c: Ditto.
	* sol-thread.c: Ditto.
	* solib-frv.c: Ditto.
	* solist.h: Ditto.
	* sparc64-tdep.c: Ditto.
	* spu-tdep.c: Ditto.
	* stabsread.c: Ditto.
	* symfile.c: Ditto.
	* valops.c: Ditto.
	* varobj.c: Ditto.
	* vax-nat.c: Ditto.
	* python/py-block.c: Ditto.
	* python/py-symbol.c: Ditto.
	* python/py-symtab.c: Ditto.
	* python/py-value.c: Ditto.
	* tui/tui-win.c: Ditto.
 2011-02-26 02:07:10 +00:00
Pedro Alves
de15c4ab2d gdb/ 
* mips-tdep.c (mips_print_register): Use get_frame_register_value
	and val_print_scalar_formatted.
 2011-01-28 15:42:01 +00:00
Michael Snyder
025bb325db 2011-01-08 Michael Snyder <msnyder@vmware.com> 
* m2-exp.y: Comment cleanup, mostly periods and spaces.
	* m2-lang.c: Ditto.
	* m2-typeprint.c: Ditto.
	* m2-valprint.c: Ditto.
	* m32c-tdep.c: Ditto.
	* m32r-linux-nat.c: Ditto.
	* m32r-rom.c: Ditto.
	* m32r-tdep.c: Ditto.
	* m32r-tdep.h: Ditto.
	* m68hc11-tdep.c: Ditto.
	* m58klinux-nat.c: Ditto.
	* m68k-tdep.c: Ditto.
	* m88k-tdep.c: Ditto.
	* m88k-tdep.h: Ditto.
	* machoread.c: Ditto.
	* macrocmd.c: Ditto.
	* macroexp.c: Ditto.
	* macrotab.c: Ditto.
	* main.c: Ditto.
	* maint.c: Ditto.
	* mdebugread.c: Ditto.
	* mdebugread.h: Ditto.
	* memattr.c: Ditto.
	* memattr.h: Ditto.
	* memory-map.h: Ditto.
	* mep-tdep.c: Ditto.
	* microblaze-rom.c: Ditto.
	* microblaze-tdep.c: Ditto.
	* minsyms.c: Ditto.
	* mips-irix-tdep.c: Ditto.
	* mips-linux-nat.c: Ditto.
	* mips-linux-tdep.c: Ditto.
	* mips-linux-tdep.h: Ditto.
	* mipsnbsd-nat.c: Ditto.
	* mipsnbsd-tdep.c: Ditto.
	* mipsread.c: Ditto.
	* mips-tdep.c: Ditto.
	* mips-tdep.h: Ditto.
	* mn10300-linux-tdep.c: Ditto.
	* mn10300-tdep.c: Ditto.
	* mn10300-tdep.h: Ditto.
	* monitor.c: Ditto.
	* monitor.h: Ditto.
	* moxie-tdep.c: Ditto.
	* moxie-tdep.h: Ditto.
	* mt-tdep.c: Ditto.
 2011-01-09 03:20:33 +00:00
Joel Brobecker
7b6bb8daac run copyright.sh for 2011. 2011-01-01 15:34:07 +00:00
Hui Zhu
175ff332d0 2010-12-28 Hui Zhu <teawater@gmail.com> 
* gdbarch.sh (ax_pseudo_register_collect,
	ax_pseudo_register_push_stack): new callbacks.
	(agent_expr): Forward declare.
	* gdbarch.h, gdbarch.c: Regenerate.
	* ax-gdb.c (gen_expr): Remove pseudo-register check code.
	* ax-general.c (user-regs.h): New include.
	(ax_reg): Call gdbarch_ax_pseudo_register_push_stack.
	(ax_reg_mask): Call gdbarch_ax_pseudo_register_collect.
	* mips-tdep.c (ax.h): New include.
	(mips_ax_pseudo_register_collect,
	mips_ax_pseudo_register_push_stack): New functions.
	(mips_gdbarch_init): Set mips_ax_pseudo_register_collect and
	mips_ax_pseudo_register_push_stack.
 2010-12-28 16:00:13 +00:00
Hui Zhu
6229fbeaa6 2010-12-27 Kevin Buettner <kevinb@redhat.com> 
Hui Zhu  <teawater@gmail.com>

	* mips-tedp.c (mips_register_name): Add comments.
 2010-12-27 08:17:34 +00:00
Kevin Buettner
930bd0e01a * mips-tdep.c (make_mips16_addr): New function. 
(mips_elf_make_msymbol_special): Don't set the low bit in the
	symbol's address.
	(mips_read_pc, mips_unwind_pc, mips_addr_bits_remove): Strip bit
	indicating mips16 address, if present.
	(mips_write_pc): Set bit indicating mips16 address when in a mips16
	function.
	(mips_eabi_push_dummy_call, mips_o64_push_dummy_call): Likewise,
	but for each function pointer argument to inferior function call.
 2010-12-17 21:39:27 +00:00
Kevin Buettner
ee51a8c7e1 * mips-tdep.c (mips_convert_register_float_case_p) 
(mips_convert_register_gpreg_case_p): New functions.
	(mips_convert_register_p): Invoke new functions above.
	(mips_register_to_value): Add case for fetching value shorter
	than 64 bits from a 64-bit register.
	(mips_value_to_register): Add case for storing value shorter
	than 64 bits into a 64-bit register.
 2010-12-16 22:50:48 +00:00
Kevin Buettner
8bdf35dcae * mips-tdep.c (mips_pseudo_register_write): Sign extend 32-bit 
cooked values that are being transferred to 64-bit raw registers.
	(mips_pseudo_register_read): Revise to preserve symmetry with
	mips_pseudo_register_write().
 2010-12-15 20:53:08 +00:00
Kevin Buettner
a8852dc55e * mips-tdep.c (mips_eabi_push_dummy_call): Place signed, rather 
than unsigned, values in registers.
 2010-12-14 21:07:50 +00:00
Jan Kratochvil
16c381f058 gdb/ 
Rename and move inferior_thread_state and inferior_status.
	* gdbthread.h (struct thread_control_state): New struct, move fields
	step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
	trap_expected, proceed_to_finish, in_infcall, step_over_calls,
	stop_step and stop_bpstat here from struct thread_info.
	(struct thread_suspend_state): New struct, move field stop_signal here
	from struct thread_info.
	(struct thread_info): Move the fields above from this struct.
	* inferior.h: Move the inferior_thread_state and inferior_status
	declarations comment to their definitions at infrun.c.
	(struct inferior_control_state): New struct, move field stop_soon from
	struct inferior here.
	(struct inferior_suspend_state): New empty struct.
	(struct inferior): New fields control and suspend.  Move out field
	stop_soon.
	* infrun.c (struct inferior_thread_state): Rename to ...
	(infcall_suspend_state): ... here.  Replace field stop_signal by
	fields thread_suspend and inferior_suspend.
	(save_inferior_thread_state): Rename to ...
	(save_infcall_suspend_state): ... here.  New variable inf.  Update the
	code for new fields.
	(restore_inferior_thread_state): Rename to ...
	(restore_infcall_suspend_state): ... here.  New variable inf.  Update
	the code for new fields.
	(do_restore_inferior_thread_state_cleanup): Rename to ...
	(do_restore_infcall_suspend_state_cleanup): ... here.
	(make_cleanup_restore_inferior_thread_state): Rename to ...
	(make_cleanup_restore_infcall_suspend_state): ... here.
	(discard_inferior_thread_state): Rename to ...
	(discard_infcall_suspend_state): ... here.
	(get_inferior_thread_state_regcache): Rename to ...
	(get_infcall_suspend_state_regcache): ... here.
	(struct inferior_status): Rename to ...
	(struct infcall_control_state): ... here.  Replace fields
	step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
	trap_expected, proceed_to_finish, in_infcall, step_over_calls,
	stop_step, stop_bpstat and stop_soon by fields thread_control and
	inferior_control.
	(save_inferior_status): Rename to ...
	(save_infcall_control_state): ... here.  Update the code for new
	fields.
	(restore_inferior_status): Rename to ...
	(restore_infcall_control_state): ... here.  Update the code for new
	fields.
	(do_restore_inferior_status_cleanup): Rename to ...
	(do_restore_infcall_control_state_cleanup): ... here.
	(make_cleanup_restore_inferior_status): Rename to ...
	(make_cleanup_restore_infcall_control_state): ... here.
	(discard_inferior_status): Rename to ...
	(discard_infcall_control_state): ... here.
	* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
	exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
	inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
	mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
	solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
	references to the moved fields and renamed functions.
 2010-11-28 04:31:25 +00:00
Hui Zhu
50e8a0d53b 2010-08-05 Hui Zhu <teawater@gmail.com> 
* mips-linux-tdep.c(regset.h): New include.
	(mips_supply_gregset_wrapper, mips_fill_gregset_wrapper,
	mips_supply_fpregset_wrapper, mips_fill_fpregset_wrapper,
	mips64_supply_gregset_wrapper, mips64_fill_gregset_wrapper,
	mips64_supply_fpregset_wrapper, mips64_fill_fpregset_wrapper,
	mips_linux_regset_from_core_section): New functions.
	(fetch_core_registers, regset_core_fns): Deleted.
	(mips_linux_init_abi): Add mips_linux_regset_from_core_section.
	Deleted regset_core_fns.
	* mips-tdep.c(mips_gdbarch_init): Initialize tdep->gregset,
	tdep->gregset64, tdep->fpregset and tdep->fpregset64.
	* mips-tdep.h(gdbarch_tdep): Add gregset, gregset64, fpregset
	and fpregset64.
 2010-08-05 03:03:36 +00:00
Pedro Alves
cce7e648b9 * breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove 
unnecessary space in string.
	* filesystem.c (_initialize_filesystem): Ditto.
	* frame.c (_initialize_frame): Ditto.
	* infcmd.c (step_once): Ditto.
	* infrun.c (_initialize_infrun): Ditto.
	* linux-nat.c (linux_child_follow_fork): Ditto.
	* maint.c (maintenance_deprecate): Ditto.
	* memattr.c (_initialize_mem): Ditto.
	* mips-tdep.c (_initialize_mips_tdep): Ditto.
	* monitor.c (monitor_open): Ditto.
	* procfs.c (procfs_xfer_memory): Ditto.
	* reverse.c (bookmarks_info): Ditto.
	* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto.
	* stack.c (_initialize_stack): Ditto.
	* tracepoint.c (_initialize_tracepoint): Ditto.
	* xtensa-tdep.c (xtensa_supply_gregset,
	xtensa_regset_from_core_section): Ditto.
 2010-07-01 15:36:18 +00:00
Joel Brobecker
f08877ba09 Wrong return convention for arrays (mips-irix). 
* mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
        128 bits or smaller are returned the same way as structs
        and unions of the the same size.
 2010-01-09 04:42:54 +00:00
Joel Brobecker
f2ec0ecff6 * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable 
containing the correct breakpoint instruction to use on mips-irix.
        Use it when the osabi is GDB_OSABI_IRIX.
 2010-01-09 04:38:29 +00:00
Joel Brobecker
4c38e0a4fc Update copyright year in most headers. 
Automatic update by copyright.sh.
 2010-01-01 07:32:07 +00:00
Daniel Jacobowitz
21327321a0 2009-11-13 Maciej W. Rozycki <macro@codesourcery.com> 
* mips-tdep.c (mips_insn16_frame_this_id): Mark the outermost
	frame.
	(mips_insn32_frame_this_id): Likewise.
 2009-11-13 22:48:11 +00:00
Pedro Alves
6c95b8df7f 2009-10-19 Pedro Alves <pedro@codesourcery.com> 
Stan Shebs	<stan@codesourcery.com>

	Add base multi-executable/process support to GDB.

	gdb/
	* Makefile.in (SFILES): Add progspace.c.
	(COMMON_OBS): Add progspace.o.
	* progspace.h: New.
	* progspace.c: New.

	* breakpoint.h (struct bp_target_info) <placed_address_space>: New
	field.
	(struct bp_location) <pspace>: New field.
	(struct breakpoint) <pspace>: New field.
	(bpstat_stop_status, breakpoint_here_p)
	(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
	(regular_breakpoint_inserted_here_p)
	(software_breakpoint_inserted_here_p, breakpoint_thread_match)
	(set_default_breakpoint): Adjust prototypes.
	(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
	(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
	Adjust prototypes.
	* breakpoint.c (executing_startup): Delete.
	(default_breakpoint_sspace): New.
	(breakpoint_restore_shadows): Skip if the address space doesn't
	match.
	(update_watchpoint): Record the frame's program space in the
	breakpoint location.
	(insert_bp_location): Record the address space in target_info.
	Adjust to pass the symbol space to solib_name_from_address.
	(breakpoint_program_space_exit): New.
	(insert_breakpoint_locations): Switch the symbol space and thread
	when inserting breakpoints.  Don't insert breakpoints in a vfork
	parent waiting for vfork done if we're not attached to the vfork
	child.
	(remove_breakpoints_pid): New.
	(reattach_breakpoints): Switch to a thread of PID.  Ignore
	breakpoints of other symbol spaces.
	(create_internal_breakpoint): Store the symbol space in the sal.
	(create_longjmp_master_breakpoint): Iterate over all symbol
	spaces.
	(update_breakpoints_after_exec): Ignore breakpoints for other
	symbol spaces.
	(remove_breakpoint): Rename to ...
	(remove_breakpoint_1): ... this.  Pass the breakpoints symbol
	space to solib_name_from_address.
	(remove_breakpoint): New.
	(mark_breakpoints_out): Ignore breakpoints from other symbol
	spaces.
	(breakpoint_init_inferior): Ditto.
	(breakpoint_here_p): Add an address space argument and adjust to
	use breakpoint_address_match.
	(moribund_breakpoint_here_p): Ditto.
	(regular_breakpoint_inserted_here_p): Ditto.
	(breakpoint_inserted_here_p): Ditto.
	(software_breakpoint_inserted_here_p): Ditto.
	(breakpoint_thread_match): Ditto.
	(bpstat_check_location): Ditto.
	(bpstat_stop_status): Ditto.
	(print_breakpoint_location): If there's a location to print,
	switch the current symbol space.
	(print_one_breakpoint_location): Add `allflag' argument.
	(print_one_breakpoint): Ditto.	Adjust.
	(do_captured_breakpoint_query): Adjust.
	(breakpoint_1): Adjust.
	(breakpoint_has_pc): Also match the symbol space.
	(describe_other_breakpoints): Add a symbol space argument and
	adjust.
	(set_default_breakpoint): Add a symbol space argument.	Set
	default_breakpoint_sspace.
	(breakpoint_address_match): New.
	(check_duplicates_for): Add an address space argument, and adjust.
	(set_raw_breakpoint): Record the symbol space in the location and
	in the breakpoint.
	(set_longjmp_breakpoint): Skip longjmp master breakpoints from
	other symbol spaces.
	(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
	(disable_breakpoints_in_shlibs): Skip breakpoints from other
	symbol spaces.
	(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
	(create_catchpoint): Set the symbol space in the sal.
	(disable_breakpoints_before_startup): Skip breakpoints from other
	symbol spaces.	Set executing_startup in the current symbol space.
	(enable_breakpoints_after_startup): Clear executing_startup in the
	current symbol space.  Skip breakpoints from other symbol spaces.
	(clone_momentary_breakpoint): Also copy the symbol space.
	(add_location_to_breakpoint): Set the location's symbol space.
	(bp_loc_is_permanent): Switch thread and symbol space.
	(create_breakpoint): Adjust.
	(expand_line_sal_maybe): Expand comment to mention symbol spaces.
	Switch thread and symbol space when reading memory.
	(parse_breakpoint_sals): Set the symbol space in the sal.
	(break_command_really): Ditto.
	(skip_prologue_sal): Switch and space.
	(resolve_sal_pc): Ditto.
	(watch_command_1): Record the symbol space in the sal.
	(create_ada_exception_breakpoint): Adjust.
	(clear_command): Adjust.  Match symbol spaces.
	(update_global_location_list): Use breakpoint_address_match.
	(breakpoint_re_set_one): Switch thread and space.
	(breakpoint_re_set): Save symbol space.
	(breakpoint_re_set_thread): Also reset the symbol space.
	(deprecated_insert_raw_breakpoint): Add an address space argument.
	Adjust.
	(insert_single_step_breakpoint): Ditto.
	(single_step_breakpoint_inserted_here_p): Ditto.
	(clear_syscall_counts): New.
	(_initialize_breakpoint): Install it as inferior_exit observer.

	* exec.h: Include "progspace.h".
	(exec_bfd, exec_bfd_mtime): New defines.
	(exec_close): Declare.
	* exec.c: Include "gdbthread.h" and "progspace.h".
	(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
	(using_exec_ops): New.
	(exec_close_1): Rename to exec_close, and make public.
	(exec_close): Rename to exec_close_1, and adjust all callers.  Add
	description.  Remove target sections and close executables from
	all program spaces.
	(exec_file_attach): Add comment.
	(add_target_sections): Check on `using_exec_ops' to check if the
	target should be pushed.
	(remove_target_sections): Only unpush the target if there are no
	more target sections in any symbol space.
	* gdbcore.h: Include "exec.h".
	(exec_bfd, exec_bfd_mtime): Remove declarations.

	* frame.h (get_frame_program_space, get_frame_address_space)
	(frame_unwind_program_space): Declare.
	* frame.c (struct frame_info) <pspace, aspace>: New fields.
	(create_sentinel_frame): Add program space argument.  Set the
	pspace and aspace fields of the frame object.
	(get_current_frame, create_new_frame): Adjust.
	(get_frame_program_space): New.
	(frame_unwind_program_space): New.
	(get_frame_address_space): New.
	* stack.c (print_frame_info): Adjust.
	(print_frame): Use the frame's program space.

	* gdbthread.h (any_live_thread_of_process): Declare.
	* thread.c (any_live_thread_of_process): New.
	(switch_to_thread): Switch the program space as well.
	(restore_selected_frame): Don't warn if trying to restore frame
	level 0.

	* inferior.h: Include "progspace.h".
	(detach_fork): Declare.
	(struct inferior) <removable, aspace, pspace>
	<vfork_parent, vfork_child, pending_detach>
	<waiting_for_vfork_done>: New fields.
	<terminal_info>: Remove field.
	<data, num_data>: New fields.
	(register_inferior_data, register_inferior_data_with_cleanup)
	(clear_inferior_data, set_inferior_data, inferior_data): Declare.
	(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
	(inferior_appeared): Declare.
	(find_inferior_pid): Typo.
	(find_inferior_id, find_inferior_for_program_space): Declare.
	(set_current_inferior, save_current_inferior, prune_inferiors)
	(number_of_inferiors): Declare.
	(inferior_list): Declare.
	* inferior.c: Include "gdbcore.h" and "symfile.h".
	(inferior_list): Make public.
	(delete_inferior_1): Always delete thread silently.
	(find_inferior_id): Make public.
	(current_inferior_): New.
	(current_inferior): Use it.
	(set_current_inferior): New.
	(restore_inferior): New.
	(save_current_inferior): New.
	(free_inferior): Free the per-inferior data.
	(add_inferior_silent): Allocate per-inferior data.
	Call inferior_appeared.
	(delete_threads_of_inferior): New.
	(delete_inferior_1): Adjust interface to take an inferior pointer.
	(delete_inferior): Adjust.
	(delete_inferior_silent): Adjust.
	(exit_inferior_1): New.
	(exit_inferior): New.
	(exit_inferior_silent): New.
	(exit_inferior_num_silent): New.
	(detach_inferior): Adjust.
	(inferior_appeared): New.
	(discard_all_inferiors): Adjust.
	(find_inferior_id): Make public.  Assert pid is not zero.
	(find_inferior_for_program_space): New.
	(have_inferiors): Check if we have any inferior with pid not zero.
	(have_live_inferiors): Go over all pushed targets looking for
	process_stratum.
	(prune_inferiors): New.
	(number_of_inferiors): New.
	(print_inferior): Add executable column.  Print vfork parent/child
	relationships.
	(inferior_command): Adjust to cope with not running inferiors.
	(remove_inferior_command): New.
	(add_inferior_command): New.
	(clone_inferior_command): New.
	(struct inferior_data): New.
	(struct inferior_data_registration): New.
	(struct inferior_data_registry): New.
	(inferior_data_registry): New.
	(register_inferior_data_with_cleanup): New.
	(register_inferior_data): New.
	(inferior_alloc_data): New.
	(inferior_free_data): New.
	(clear_inferior_data): New.
	(set_inferior_data): New.
	(inferior_data): New.
	(initialize_inferiors): New.
	(_initialize_inferiors): Register "add-inferior",
	"remove-inferior" and "clone-inferior" commands.

	* objfiles.h: Include "progspace.h".
	(struct objfile) <pspace>: New field.
	(symfile_objfile, object_files): Don't declare.
	(ALL_PSPACE_OBJFILES): New.
	(ALL_PSPACE_OBJFILES_SAFE): New.
	(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
	(ALL_PSPACE_SYMTABS): New.
	(ALL_PRIMARY_SYMTABS): Adjust.
	(ALL_PSPACE_PRIMARY_SYMTABS): New.
	(ALL_PSYMTABS): Adjust.
	(ALL_PSPACE_PSYMTABS): New.
	* objfiles.c (object_files, symfile_objfile): Delete.
	(struct objfile_sspace_info): New.
	(objfiles_pspace_data): New.
	(objfiles_pspace_data_cleanup): New.
	(get_objfile_pspace_data): New.
	(objfiles_changed_p): Delete.
	(allocate_objfile): Set the objfile's program space.  Adjust to
	reference objfiles_changed_p in pspace data.
	(free_objfile): Adjust to reference objfiles_changed_p in pspace
	data.
	(objfile_relocate): Ditto.
	(update_section_map): Add pspace argument.  Adjust to iterate over
	objfiles in the passed in pspace.
	(find_pc_section): Delete sections and num_sections statics.
	Adjust to refer to program space's objfiles_changed_p.	Adjust to
	refer to sections and num_sections store in the objfile's pspace
	data.
	(objfiles_changed): Adjust to reference objfiles_changed_p in
	pspace data.
	(_initialize_objfiles): New.
	* linespec.c (decode_all_digits, decode_dollar): Set the sal's
	program space.
	* source.c (current_source_pspace): New.
	(get_current_source_symtab_and_line): Set the sal's program space.
	(set_current_source_symtab_and_line): Set current_source_pspace.
	(select_source_symtab): Ditto.	Use ALL_OBJFILES.
	(forget_cached_source_info): Iterate over all program spaces.
	* symfile.c (clear_symtab_users): Adjust.
	* symmisc.c (print_symbol_bcache_statistics): Iterate over all
	program spaces.
	(print_objfile_statistics): Ditto.
	(maintenance_print_msymbols): Ditto.
	(maintenance_print_objfiles): Ditto.
	(maintenance_info_symtabs): Ditto.
	(maintenance_info_psymtabs): Ditto.
	* symtab.h (SYMTAB_PSPACE): New.
	(struct symtab_and_line) <pspace>: New field.
	* symtab.c (init_sal): Clear the sal's program space.
	(find_pc_sect_symtab): Set the sal's program space.  Switch thread
	and space.
	(append_expanded_sal): Add program space argument.  Iterate over
	all program spaces.
	(expand_line_sal): Iterate over all program spaces.  Switch
	program space.

	* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
	(struct target_ops) <to_thread_address_space>: New field.
	(target_thread_address_space): Define.
	* target.c (target_detach): Only remove breakpoints from the
	inferior we're detaching.
	(target_thread_address_space): New.

	* defs.h (initialize_progspace): Declare.
	* top.c (gdb_init): Call it.

	* solist.h (struct so_list) <sspace>: New field.
	* solib.h (struct program_space): Forward declare.
	(solib_name_from_address): Adjust prototype.
	* solib.c (so_list_head): Replace with a macro referencing the
	program space.
	(update_solib_list): Set the so's program space.
	(solib_name_from_address): Add a program space argument and adjust.

	* solib-svr4.c (struct svr4_info) <pid>: Delete field.
	<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
	<interp_plt_sect_high>: New fields.
	(svr4_info_p, svr4_info): Delete.
	(solib_svr4_sspace_data): New.
	(get_svr4_info): Rewrite.
	(svr4_sspace_data_cleanup): New.
	(open_symbol_file_object): Adjust.
	(svr4_default_sos): Adjust.
	(svr4_fetch_objfile_link_map): Adjust.
	(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
	(interp_plt_sect_high): Delete.
	(svr4_in_dynsym_resolve_code): Adjust.
	(enable_break): Adjust.
	(svr4_clear_solib): Revert bit that removed the svr4_info here,
	and reinstate clearing debug_base, debug_loader_offset_p,
	debug_loader_offset and debug_loader_name.
	(_initialize_svr4_solib): Register solib_svr4_pspace_data.  Don't
	install an inferior_exit observer anymore.

	* printcmd.c (struct display) <pspace>: New field.
	(display_command): Set the display's sspace.
	(do_one_display): Match the display's sspace.
	(display_uses_solib_p): Ditto.

	* linux-fork.c (detach_fork): Moved to infrun.c.
	(_initialize_linux_fork): Moved "detach-on-fork" command to
	infrun.c.
	* infrun.c (detach_fork): Moved from linux-fork.c.
	(proceed_after_vfork_done): New.
	(handle_vfork_child_exec_or_exit): New.
	(follow_exec_mode_replace, follow_exec_mode_keep)
	(follow_exec_mode_names, follow_exec_mode_string)
	(show_follow_exec_mode_string): New.
	(follow_exec): New.  Reinstate the mark_breakpoints_out call.
	Remove shared libraries before attaching new executable.  If user
	wants to keep the inferior, keep it.
	(displaced_step_fixup): Adjust to pass an address space to the
	breakpoints module.
	(resume): Ditto.
	(clear_proceed_status): In all-stop mode, always clear the proceed
	status of all threads.
	(prepare_to_proceed): Adjust to pass an address space to the
	breakpoints module.
	(proceed): Ditto.
	(adjust_pc_after_break): Ditto.
	(handle_inferior_event): When handling a process exit, switch the
	program space to the inferior's that had exited.  Call
	handle_vfork_child_exec_or_exit.  Adjust to pass an address space
	to the breakpoints module.  In non-stop mode, when following a
	fork and detach-fork is off, also resume the other branch.  Handle
	TARGET_WAITKIND_VFORK_DONE.  Set the program space in sals.
	(normal_stop): Prune inferiors.
	(_initialize_infrun): Install the new "follow-exec-mode" command.
	"detach-on-fork" moved here.

	* regcache.h (get_regcache_aspace): Declare.
	* regcache.c (struct regcache) <aspace>: New field.
	(regcache_xmalloc): Clear the aspace.
	(get_regcache_aspace): New.
	(regcache_cpy): Copy the aspace field.
	(regcache_cpy_no_passthrough): Ditto.
	(get_thread_regcache): Fetch the thread's address space from the
	target, and store it in the regcache.

	* infcall.c (call_function_by_hand): Set the sal's pspace.

	* arch-utils.c (default_has_shared_address_space): New.
	* arch-utils.h (default_has_shared_address_space): Declare.

	* gdbarch.sh (has_shared_address_space): New.
	* gdbarch.h, gdbarch.c: Regenerate.

	* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
	(linux_has_shared_address_space): New.
	(_initialize_linux_tdep): Declare.

	* arm-tdep.c (arm_software_single_step): Pass the frame's address
	space to insert_single_step_breakpoint.
	* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
	frame's pspace to breakpoint functions.
	* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
	(cris_software_single_step): Ditto.
	* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
	Pass the frame's pspace to breakpoint functions.
	(mips_software_single_step): Adjust.
	(mips_single_step_through_delay): Adjust.
	* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
	* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
	* solib-irix.c (enable_break): Adjust to pass the current frame's
	address space to breakpoint functions.
	* sparc-tdep.c (sparc_software_single_step): Ditto.
	* spu-tdep.c (spu_software_single_step): Ditto.
	* alpha-tdep.c (alpha_software_single_step): Ditto.
	* record.c (record_wait): Adjust to pass an address space to the
	breakpoints module.

	* fork-child.c (fork_inferior): Set the new inferior's program and
	address spaces.
	* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
	and address spaces.
	(inf_ptrace_attach): Set the inferior's program and address spaces.
	* linux-nat.c: Include "solib.h".
	(linux_child_follow_fork): Manage parent and child's program and
	address spaces.	 Clone the parent's program space if necessary.
	Don't wait for the vfork to be done here.  Refuse to resume if
	following the vfork parent while leaving the child stopped.
	(resume_callback): Don't resume a vfork parent.
	(linux_nat_resume): Also check for pending events in the
	lp->waitstatus field.
	(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
	events to the core.
	(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
	(cancel_breakpoint): Adjust.
	* linux-thread-db.c (thread_db_wait): Don't remove thread event
	breakpoints here.
	(thread_db_mourn_inferior): Don't mark breakpoints out here.
	Remove thread event breakpoints after mourning.
	* corelow.c: Include progspace.h.
	(core_open): Set the inferior's program and address spaces.
	* remote.c (remote_add_inferior): Set the new inferior's program
	and address spaces.
	(remote_start_remote): Update address spaces.
	(extended_remote_create_inferior_1): Don't init the thread list if
	we already debugging other inferiors.
	* darwin-nat.c (darwin_attach): Set the new inferior's program and
	address spaces.
	* gnu-nat.c (gnu_attach): Ditto.
	* go32-nat.c (go32_create_inferior): Ditto.
	* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
	* monitor.c (monitor_open): Ditto.
	* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
	* procfs.c (do_attach): Ditto.
	* windows-nat.c (do_initial_windows_stuff): Ditto.

	* inflow.c (inferior_process_group)
	(terminal_init_inferior_with_pgrp, terminal_inferior,
	(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
	(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
	to use per-inferior data instead of inferior->terminal_info.
	(inflow_inferior_data): New.
	(inflow_new_inferior): Delete.
	(inflow_inferior_data_cleanup): New.
	(get_inflow_inferior_data): New.

	* mi/mi-interp.c (mi_new_inferior): Rename to...
	(mi_inferior_appeared): ... this.
	(mi_interpreter_init): Adjust.

	* tui/tui-disasm.c: Include "progspace.h".
	(tui_set_disassem_content): Pass an address space to
	breakpoint_here_p.

	* NEWS: Mention multi-program debugging support.  Mention new
	commands "add-inferior", "clone-inferior", "remove-inferior",
	"maint info program-spaces", and new option "set
	follow-exec-mode".

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/doc/
	* observer.texi (new_inferior): Rename to...
	(inferior_appeared): ... this.

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/testsuite/
	* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
	* gdb.base/foll-exec.exp: Adjust to expect a process id before
	"Executing new program".
	* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
	* gdb.base/multi-forks.exp: Ditto.  Adjust to the inferior being
	left listed after having been killed.
	* gdb.base/attach.exp: Adjust to spell out "symbol-file".
	* gdb.base/maint.exp: Adjust test.

	* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
	* gdb.multi/Makefile.in: New.
	* gdb.multi/base.exp: New.
	* gdb.multi/goodbye.c: New.
	* gdb.multi/hangout.c: New.
	* gdb.multi/hello.c: New.
	* gdb.multi/bkpt-multi-exec.c: New.
	* gdb.multi/bkpt-multi-exec.exp: New.
	* gdb.multi/crashme.c: New.

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/doc/
	* gdb.texinfo (Inferiors): Rename node to ...
	(Inferiors and Programs): ... this.  Mention running multiple
	programs in the same debug session.
	<info inferiors>: Mention the new 'Executable' column if "info
	inferiors".  Update examples.  Document the "add-inferior",
	"clone-inferior", "remove-inferior" and "maint info
	program-spaces" commands.
	(Process): Rename node to...
	(Forks): ... this.  Document "set|show follow-exec-mode".
 2009-10-19 09:51:43 +00:00
Ulrich Weigand
e17a411335 * defs.h (extract_signed_integer, extract_unsigned_integer, 
extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer): Add BYTE_ORDER parameter.
	* findvar.c (extract_signed_integer, extract_unsigned_integer,
	extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer): Add BYTE_ORDER parameter.  Use it
	instead of current_gdbarch.

	* gdbcore.h (read_memory_integer, safe_read_memory_integer,
	read_memory_unsigned_integer, write_memory_signed_integer,
	write_memory_unsigned_integer): Add BYTE_ORDER parameter.
	* corefile.c (struct captured_read_memory_integer_arguments): Add
	BYTE_ORDER member.
	(safe_read_memory_integer): Add BYTE_ORDER parameter.  Store it into
	struct captured_read_memory_integer_arguments.
	(do_captured_read_memory_integer): Pass it to read_memory_integer.
	(read_memory_integer): Add BYTE_ORDER parameter.  Pass it to
	extract_signed_integer.
	(read_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it to
	extract_unsigned_integer.
	(write_memory_signed_integer): Add BYTE_ORDER parameter.  Pass it
	to store_signed_integer.
	(write_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it
	to store_unsigned_integer.

	* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
	* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
	Pass it to extract_unsigned_integer.


	Update calls to extract_signed_integer, extract_unsigned_integer,
	extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer, read_memory_integer,
	read_memory_unsigned_integer, safe_read_memory_integer,
	write_memory_signed_integer, write_memory_unsigned_integer, and
	get_target_memory_unsigned to pass byte order:
	* ada-lang.c (ada_value_binop): Update.
	* ada-valprint.c (char_at): Update.
	* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
	* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
	alpha_extract_return_value, alpha_read_insn,
	alpha_get_longjmp_target): Update.
	* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
	* amd64obsd-tdep.c (amd64obsd_supply_uthread,
	amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
	* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
	amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
	amd64_displaced_step_fixup): Update.
	* arm-linux-tdep.c (arm_linux_sigreturn_init,
	arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
	* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
	arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
	arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
	arm_return_value): Update.
	* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
	* auxv.c (default_auxv_parse): Update.
	* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
	avr_scan_prologue, avr_extract_return_value,
	avr_frame_prev_register, avr_push_dummy_call): Update.
	* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
	bsd_uthread_wait, bsd_uthread_thread_alive,
	bsd_uthread_extra_thread_info): Update.
	* c-lang.c (c_printstr, print_wchar): Update.
	* cp-valprint.c (cp_print_class_member): Update.
	* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
	cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
	cris_extract_return_value, find_step_target, dip_prefix,
	sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
	move_mem_to_reg_movem_op, get_data_from_address): Update.
	* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
	* dwarf2-frame.c (execute_cfa_program): Update.
	* dwarf2loc.c (find_location_expression): Update.
	* dwarf2read.c (dwarf2_const_value): Update.
	* expprint.c (print_subexp_standard): Update.
	* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
	unsigned_address_to_pointer, address_to_signed_pointer,
	read_var_value): Update.
	* frame.c (frame_unwind_register_signed,
	frame_unwind_register_unsigned, get_frame_memory_signed,
	get_frame_memory_unsigned): Update.
	* frame-unwind.c (frame_unwind_got_constant): Update.
	* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
	frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
	Update.
	* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
	frv_extract_return_value, find_func_descr,
	frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
	* f-valprint.c (f_val_print): Update.
	* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
	Update.
	* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
	h8300_push_dummy_call, h8300_extract_return_value,
	h8300h_extract_return_value, h8300_store_return_value,
	h8300h_store_return_value): Update.
	* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
	* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
	Update.
	* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
	hppa64_hpux_in_solib_call_trampoline,
	hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
	hppa_hpux_sigtramp_frame_unwind_cache,
	hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
	hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
	hppa32_hpux_search_dummy_call_sequence,
	hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
	hppa_hpux_unwind_adjust_stub): Update.
	* hppa-linux-tdep.c (insns_match_pattern,
	hppa_linux_find_global_pointer): Update.
	* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
	hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
	skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
	hppa_pseudo_register_read, hppa_frame_prev_register_helper,
	hppa_match_insns): Update.
	* hpux-thread.c (hpux_thread_fetch_registers): Update.
	* i386-tdep.c (i386bsd_sigcontext_addr): Update.
	* i386-cygwin-tdep.c (core_process_module_section): Update.
	* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
	amd64_darwin_sstep_at_sigreturn): Update.
	* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
	amd64_darwin_sigcontext_addr): Likewise.
	* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
	* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
	* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
	* i386obsd-nat.c (i386obsd_supply_pcb): Update.
	* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
	i386obsd_trapframe_cache): Update.
	* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
	i386_analyze_frame_setup, i386_analyze_prologue,
	i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
	i386_get_longjmp_target, i386_push_dummy_call,
	i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
	i386_fetch_pointer_argument): Update.
	* i387-tdep.c (i387_supply_fsave): Update.
	* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
	* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
	examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
	ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
	ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
	ia64_libunwind_frame_prev_register,
	ia64_libunwind_sigtramp_frame_this_id,
	ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
	find_extant_func_descr, find_func_descr,
	ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
	ia64_unwind_pc): Update.
	* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
	iq2000_scan_prologue, iq2000_extract_return_value,
	iq2000_push_dummy_call): Update.
	* irix5nat.c (fill_gregset): Update.
	* jv-lang.c (evaluate_subexp_java): Update.
	* jv-valprint.c (java_value_print): Update.
	* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
	lm32_extract_return_value, lm32_store_return_value): Update.
	* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
	m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
	m32c_m16c_pointer_to_address): Update.
	* m32r-tdep.c (m32r_store_return_value, decode_prologue,
	m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
	Update.
	* m68hc11-tdep.c (m68hc11_pseudo_register_read,
	m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
	m68hc11_push_dummy_call): Update.
	* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
	m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
	Update.
	* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
	m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
	m68k_get_longjmp_target): Update.
	* m88k-tdep.c (m88k_fetch_instruction): Update.
	* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
	mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
	* mi/mi-main.c (mi_cmd_data_write_memory): Update.
	* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
	mips64_linux_get_longjmp_target, mips64_fill_gregset,
	mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
	* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
	* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
	mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
	mips_o32_push_dummy_call, mips_o64_push_dummy_call,
	mips_single_step_through_delay, mips_skip_pic_trampoline_code,
	mips_integer_to_address): Update.
	* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
	Update.
	* monitor.c (monitor_supply_register, monitor_write_memory,
	monitor_read_memory_single): Update.
	* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
	moxie_analyze_prologue): Update.
	* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
	mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
	mt_push_dummy_call): Update.
	* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
	read_objc_methlist_method, read_objc_object, read_objc_super,
	read_objc_class, find_implementation_from_class): Update.
	* ppc64-linux-tdep.c (ppc64_desc_entry_point,
	ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
	Update.
	* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
	ppcobsd_sigtramp_frame_cache): Update.
	* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
	do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
	ppc64_sysv_abi_return_value): Update.
	* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
	* procfs.c (procfs_auxv_parse): Update.
	* p-valprint.c (pascal_val_print): Update.
	* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
	regcache_raw_write_signed, regcache_raw_write_unsigned,
	regcache_cooked_read_signed, regcache_cooked_read_unsigned,
	regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
	* remote-m32r-sdi.c (m32r_fetch_register): Update.
	* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
	Update.
	* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
	rs6000_convert_from_func_ptr_addr, branch_dest,
	rs6000_software_single_step): Update.
	* rs6000-tdep.c (rs6000_in_function_epilogue_p,
	ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
	bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
	rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
	rs6000_frame_cache): Update.
	* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
	s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
	s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
	extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
	* scm-exp.c (scm_lreadr): Update.
	* scm-lang.c (scm_get_field, scm_unpack): Update.
	* scm-valprint.c (scm_val_print): Update.
	* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
	score_fetch_inst): Update.
	* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
	sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
	sh64_pseudo_register_read, sh64_pseudo_register_write,
	sh64_frame_prev_register): Update:
	* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
	sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
	sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
	* solib-darwin.c (darwin_load_image_infos): Update.
	* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
	find_canonical_descriptor_in_load_object): Update.
	* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
	irix_open_symbol_file_object): Update.
	* solib-som.c (som_solib_create_inferior_hook, link_map_start,
	som_current_sos, som_open_symbol_file_object): Update.
	* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
	Update.
	* solib-svr4.c (read_program_header, scan_dyntag_auxv,
	solib_svr4_r_ldsomap): Update.
	* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
	* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
	sparc64obsd_collect_uthread): Update.
	* sparc64-tdep.c (sparc64_pseudo_register_read,
	sparc64_pseudo_register_write, sparc64_supply_gregset,
	sparc64_collect_gregset): Update.
	* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
	* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
	sparc32obsd_collect_uthread): Update.
	* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
	sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
	sparc_collect_rwindow): Update.
	* spu-linux-nat.c (parse_spufs_run): Update.
	* spu-tdep.c (spu_pseudo_register_read_spu,
	spu_pseudo_register_write_spu, spu_pointer_to_address,
	spu_analyze_prologue, spu_in_function_epilogue_p,
	spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
	spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
	info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
	info_spu_dma_command, info_spu_proxydma_command): Update.
	* stack.c (print_frame_nameless_args, frame_info): Update.
	* symfile.c (read_target_long_array, simple_read_overlay_table,
	simple_read_overlay_region_table): Update.
	* target.c (debug_print_register): Update.
	* tramp-frame.c (tramp_frame_start): Update.
	* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
	v850_extract_return_value, v850_store_return_value,
	* valarith.c (value_binop, value_bit_index): Update.
	* valops.c (value_cast): Update.
	* valprint.c (val_print_type_code_int, val_print_string,
	read_string): Update.
	* value.c (unpack_long, unpack_double, unpack_field_as_long,
	modify_field, pack_long): Update.
	* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
	vax_skip_prologue): Update.
	* xstormy16-tdep.c (xstormy16_push_dummy_call,
	xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
	xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
	xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
	* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
	xtensa_pseudo_register_write, xtensa_frame_cache,
	xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.


	* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
	decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
	BYTE_ORDER parameter.
	(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
	parameters.
	(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
	(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
	* dfp.c (match_endianness): Add BYTE_ORDER parameter.  Use it
	instead of current_gdbarch.
	(decimal_to_string, decimal_from_integral, decimal_from_floating,
	decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
	Pass it to match_endianness.
	(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
	parameters.  Pass them to match_endianness.
	(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
	Pass them to match_endianness.
	(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
	Pass them to match_endianness.
	* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
	BYTE_ORDER_Y output parameters.
	(value_binop): Update call to value_args_as_decimal.

	Update calls to decimal_to_string, decimal_from_string,
	decimal_from_integral, decimal_from_floating, decimal_to_doublest,
	decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
	to pass/receive byte order:
	* c-exp.y (parse_number): Update.
	* printcmd.c (printf_command): Update.
	* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
	value_equal, value_less): Update.
	* valops.c (value_cast, value_one): Update.
	* valprint.c (print_decimal_floating): Update.
	* value.c (unpack_long, unpack_double): Update.
	* python/python-value.c (valpy_nonzero): Update.


	* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
	(printstr): Update calls to char_at.
	(ada_val_print_array): Likewise.
	* valprint.c (read_string): Add BYTE_ORDER parameter.
	(val_print_string): Update call to read_string.
	* c-lang.c (c_get_string): Likewise.
	* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
	* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
	Use it instead of current_gdbarch.
	* printcmd.c (printf_command): Update calls to target_wide_charset.
	* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
	Pass to target_wide_charset.  Use it instead of current_gdbarch.
	(classify_type): Add BYTE_ORDER parameter.  Pass to
	charset_for_string_type.  Allow NULL encoding pointer.
	(print_wchar): Add BYTE_ORDER parameter.
	(c_emit_char): Update calls to classify_type and print_wchar.
	(c_printchar, c_printstr): Likewise.


	* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
	* gdbarch.c, gdbarch.h: Regenerate.
	* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
	parameter.
	* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
	* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
	(rs6000_skip_trampoline_code): Update call.

	* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
	dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
	(alpha_read_insn): Add GDBARCH parameter.
	* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
	(alpha_register_to_value): Pass architecture to alpha_sts.
	(alpha_extract_return_value): Likewise.
	(alpha_value_to_register): Pass architecture to alpha_lds.
	(alpha_store_return_value): Likewise.
	(alpha_read_insn): Add GDBARCH parameter.
	(alpha_skip_prologue): Pass architecture to alpha_read_insn.
	(alpha_heuristic_proc_start): Likewise.
	(alpha_heuristic_frame_unwind_cache): Likewise.
	(alpha_next_pc): Likewise.
	(alpha_sigtramp_frame_this_id): Pass architecture to
	tdep->dynamic_sigtramp_offset callback.
	(alpha_sigtramp_frame_sniffer): Pass architecture to
	tdep->pc_in_sigtramp callback.
	* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
	(alphafbsd_sigtramp_offset): Likewise.
	* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
	parameter.  Pass to alpha_read_insn.
	(alpha_linux_sigtramp_offset): Add GDBARCH parameter.  Pass to
	alpha_linux_sigtramp_offset_1.
	(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alpha_linux_sigtramp_offset.
	(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
	and alpha_linux_sigtramp_offset.
	* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
	(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alphanbsd_sigtramp_offset.
	* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
	(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alpha_read_insn.
	(alphaobsd_sigcontext_addr): Pass architecture to
	alphaobsd_sigtramp_offset.
	* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
	parameter.

	* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
	(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
	(amd64_frame_cache): Likewise.

	* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
	(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
	thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
	* arm-wince-tdep.c: Include "frame.h".

	* avr-tdep.c (EXTRACT_INSN): Remove.
	(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
	(avr_skip_prologue): Pass architecture to avr_scan_prologue.
	(avr_frame_unwind_cache): Likewise.

	* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
	(find_step_target): Initialize it.
	(get_data_from_address): Add BYTE_ORDER parameter.
	(bdap_prefix): Pass byte order to get_data_from_address.
	(handle_prefix_assign_mode_for_aritm_op): Likewise.
	(three_operand_add_sub_cmp_and_or_op): Likewise.
	(handle_inc_and_index_mode_for_aritm_op): Likewise.

	* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
	(frv_linux_sigcontext_reg_addr): Pass architecture to
	frv_linux_pc_in_sigtramp.
	(frv_linux_sigtramp_frame_sniffer): Likewise.

	* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
	(h8300_analyze_prologue): Add GDBARCH parameter.  Pass to
	h8300_is_argument_spill.
	(h8300_frame_cache, h8300_skip_prologue): Pass architecture
	to h8300_analyze_prologue.

	* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
	in_solib_call_trampoline callback.
	(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
	* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
	parameter.
	(hppa64_push_dummy_call): Pass architecture to
	hppa64_convert_code_addr_to_fptr.
	(hppa_match_insns): Add GDBARCH parameter.
	(hppa_match_insns_relaxed): Add GDBARCH parameter.  Pass to
	hppa_match_insns.
	(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
	(hppa_in_solib_call_trampoline): Add GDBARCH parameter.  Pass to
	hppa_match_insns_relaxed.
	(hppa_stub_unwind_sniffer): Pass architecture to
	tdep->in_solib_call_trampoline callback.
	* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
	(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
	hppa_hpux_search_pattern.
	* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
	(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
	Pass to insns_match_pattern.
	(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
	hppa_linux_sigtramp_find_sigcontext.
	(hppa_linux_sigtramp_frame_sniffer): Likewise.
	(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
	(hppa64_hpux_in_solib_call_trampoline): Likewise.

	* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
	(i386_analyze_frame_setup): Add GDBARCH parameter.
	(i386_analyze_prologue): Add GDBARCH parameter.  Pass to
	i386_follow_jump and i386_analyze_frame_setup.
	(i386_skip_prologue): Pass architecture to i386_analyze_prologue
	and i386_follow_jump.
	(i386_frame_cache): Pass architecture to i386_analyze_prologue.
	(i386_pe_skip_trampoline_code): Add FRAME parameter.
	* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
	* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
	frame to i386_pe_skip_trampoline_code.

	* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
	to sigcontext_register_address callback.
	* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
	(ia64_find_unwind_table): Pass architecture to
	ia64_find_global_pointer.
	(find_extant_func_descr): Add GDBARCH parameter.
	(find_func_descr): Pass architecture to find_extant_func_descr
	and ia64_find_global_pointer.
	(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
	tdep->sigcontext_register_address callback.
	* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
	GDBARCH parameter.

	* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
	(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.

	* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
	(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
	lm32_analyze_prologue.

	* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
	(m32r_skip_prologue): Pass architecture to decode_prologue.

	* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
	(m68hc11_scan_prologue): Pass architecture to
	m68hc11_analyze_instruction.

	* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
	(m68k_analyze_prologue): Pass architecture to
	m68k_analyze_frame_setup.

	* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
	(m88k_analyze_prologue): Add GDBARCH parameter.  Pass byte order
	to m88k_fetch_instruction.
	(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
	(m88k_frame_cache): Likewise.

	* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
	(mep_analyze_prologue): Pass architecture to mep_get_insn.

	* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
	(mips32_next_pc): Pass architecture to mips_fetch_instruction.
	(deal_with_atomic_sequence): Likewise.
	(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
	(mips16_scan_prologue): Likewise.
	(mips32_scan_prologue): Likewise.
	(mips16_in_function_epilogue_p): Likewise.
	(mips32_in_function_epilogue_p): Likewise.
	(mips_about_to_return): Likewise.
	(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
	(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
	(mips_skip_prologue): Pass architecture to mips16_scan_prologue
	and mips32_scan_prologue.
	(mips_in_function_epilogue_p): Pass architecture to
	mips16_in_function_epilogue_p and
	mips32_in_function_epilogue_p.
	(heuristic_proc_start): Pass architecture to mips_fetch_instruction
	and mips_about_to_return.
	(mips_skip_mips16_trampoline_code): Pass architecture to
	mips_fetch_instruction.
	(fetch_mips_16): Add GDBARCH parameter.
	(mips16_next_pc): Pass architecture to fetch_mips_16.
	(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
	fetch_mips_16.

	* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
	read_objc_methlist_method, read_objc_object, read_objc_super,
	read_objc_class): Add GDBARCH parameter.
	(find_implementation_from_class): Add GDBARCH parameter, pass
	to read_objc_class, read_objc_methlist_nmethods, and
	read_objc_methlist_method.
	(find_implementation): Add GDBARCH parameter, pass to
	read_objc_object and find_implementation_from_class.
	(resolve_msgsend, resolve_msgsend_stret): Pass architecture
	to find_implementation.
	(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
	architecture to read_objc_super and find_implementation_from_class.

	* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
	(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
	ppc64_standard_linkage3_target): Pass architecture to
	ppc64_desc_entry_point.
	* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
	(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
	(rs6000_fetch_instruction): Add GDBARCH parameter.
	(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
	rs6000_fetch_instruction.
	(skip_prologue): Pass architecture to rs6000_fetch_instruction.

	* remote-mips.c (mips_store_word): Return old_contents as host
	integer value instead of target bytes.

	* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
	(s390_analyze_prologue): Initialize it.
	(extend_simple_arg): Add GDBARCH parameter.
	(s390_push_dummy_call): Pass architecture to extend_simple_arg.

	* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
	* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
	(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
	* scm-valprint.c (scm_scmval_print): Likewise.
	(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
	SCM_BYTE_ORDER.

	* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
	(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
	look_for_args_moves.
	(sh64_skip_prologue): Pass architecture to
	sh64_skip_prologue_hard_way.
	* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
	(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
	(sh_frame_cache): Likewise.

	* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
	(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
	Pass architecture to extract_mips_address.

	* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
	* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
	(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
	to sparc_fetch_wcookie.
	(sparc32_frame_prev_register): Likewise.
	* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
	* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
	* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.

	* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
	(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
	(spu_virtual_frame_pointer): Likewise.
	(spu_frame_unwind_cache): Likewise.
	(info_spu_mailbox_list): Add BYTE_ORER parameter.
	(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
	(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
	(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
	to info_spu_dma_cmdlist.

	* symfile.c (read_target_long_array): Add GDBARCH parameter.
	(simple_read_overlay_table, simple_read_overlay_region_table,
	simple_overlay_update_1): Pass architecture to read_target_long_array.

	* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
	(v850_frame_cache): Pass architecture to v850_analyze_prologue.

	* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
	parameter.
	(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
	to xstormy16_analyze_prologue.
	(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
	(xstormy16_find_jmp_table_entry): Likewise.
	(xstormy16_skip_trampoline_code): Pass architecture to
	xstormy16_resolve_jmp_table_entry.
	(xstormy16_pointer_to_address): Likewise.
	(xstormy16_address_to_pointer): Pass architecture to
	xstormy16_find_jmp_table_entry.

	* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
	(call0_analyze_prologue): Add GDBARCH parameter, pass to
	call0_track_op.
	(call0_frame_cache): Pass architecture to call0_analyze_prologue.
	(xtensa_skip_prologue): Likewise.
 2009-07-02 17:25:59 +00:00
Ulrich Weigand
5af949e350 * defs.h (strlen_paddr, paddr, paddr_nz): Remove. 
(paddress): Add GDBARCH parameter.
	* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
	(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
	* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
	* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
	use it instead of current_gdbarch.

	Update calls to ui_out_field_core_addr to pass architecture:
	* ada-lang.c (print_one_exception): Update.
	* breakpoint.c (print_one_breakpoint_location,
	print_one_exception_catchpoint): Update.
	* disasm.c (dump_insns): Update.
	* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
	* mi/mi-main.c (mi_cmd_data_read_memory): Update.
	* mi/mi-symbol-cmds.c: Include "objfiles.h".
	(mi_cmd_symbol_list_lines): Update.
	* stack.c (print_frame_info, print_frame): Update.

	Update callers of paddress to pass architecture:
	* ada-tasks.c (info_task): Update.
	* ada-valprint.c (ada_val_print_1): Update.
	* annotate.c (annotate_source, annotate_frame_begin): Update.
	* breakpoint.c (insert_bp_location, describe_other_breakpoints,
	mention): Update.
	* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
	Update.
	* corefile.c (memory_error): Update.
	* c-valprint.c (print_function_pointer_address, c_val_print): Update.
	* disasm.c (dis_asm_print_address): Update.
	* exec.c (print_section_info): Update.
	* f-valprint.c (f_val_print): Update.
	* infcmd.c: Include "arch-utils.h".
	(jump_command, program_info): Update.
	* linux-fork.c: Include "arch-utils.h".
	(info_forks_command): Update.
	* m2-valprint.c (print_function_pointer_address,
	print_unpacked_pointer, print_variable_at_address,
	m2_val_print): Update.
	* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
	Update.
	* printcmd.c (print_address, print_address_demangle, address_info):
	Update.
	* p-valprint.c (pascal_val_print): Update.
	* source.c: Include "arch-utils.h".
	(line_info): Update.
	* stack.c (frame_info, print_block_frame_labels): Update.
	* symfile.c (add_symbol_file_command, list_overlays_command): Update.
	* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
	print_symbol, print_partial_symbols, maintenance_info_psymtabs,
	maintenance_check_symtabs): Update.
	* symtab.c (find_pc_sect_symtab): Update.
	* target.c (deprecated_debug_xfer_memory): Update.
	* tracepoint.c (scope_info): Update.
	* tui/tui-stack.c (tui_make_status_line): Update.
	* valprint.c (val_print_string): Update.

	Update callers of paddr_nz to use paddress instead (keeping
	user-visible output identical):
	* alpha-tdep.c (alpha_heuristic_proc_start): Update.
	* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
	amd64_displaced_step_fixup): Update.
	* arch-utils.c (simple_displaced_step_copy_insn): Update.
	* auxv.c (fprint_target_auxv): Update.
	* breakpoint.c (insert_single_step_breakpoint): Update.
	* buildsym.c (finish_block): Update.
	* cli/cli-dump.c (restore_section_callback): Update.
	* fbsd-nat.c (fbsd_find_memory_regions): Update.
	* frame.c (frame_unwind_register_value): Update.
	* gcore.c (gcore_create_callback): Update.
	* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
	* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
	i386_record_lea_modrm_addr, i386_record_lea_modrm,
	i386_process_record): Update.
	* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
	ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
	ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
	* infrun.c (displaced_step_prepare, displaced_step_fixup,
	handle_inferior_event, insert_step_resume_breakpoint_at_sal,
	insert_longjmp_resume_breakpoint): Update.
	* linux-nat.c (linux_nat_find_memory_regions): Update.
	* linux-record.c (record_linux_system_call): Update.
	* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
	mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
	mips_o64_push_dummy_call): Update.
	* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
	* record.c (record_arch_list_add_mem, record_wait,
	record_xfer_partial): Update.
	* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
	mips_common_breakpoint): Update.
	* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
	* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
	* solib-som.c (som_current_sos): Update.
	* symfile.c (load_progress, generic_load): Update.
	* symfile-mem.c (add_vsyscall_page): Update.
	* valops.c (value_fetch_lazy): Update.
	* windows-tdep.c (windows_xfer_shared_library): Update.

	Update callers of paddr_nz to use paddress instead (changing
	user-visible output to make it more correct):
	* dwarf2loc.c (locexpr_describe_location): Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint,
	ia64_memory_remove_breakpoint): Update.
	* jv-valprint.c (java_value_print): Update.
	* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
	* monitor.c (monitor_read_memory): Update.

	Update callers of paddr to use paddress instead (changing
	user-visible output to make it more correct):
	* arm-tdep.c (arm_push_dummy_call): Update.
	* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
	create_breakpoint): Update.
	* darwin-nat-info.c (darwin_debug_regions): Update.
	* dcache.c (dcache_info): Update.
	* dsrec.c (load_srec, make_srec): Update.
	* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
	dwarf2_frame_cache): Update.
	* gcore.c (gcore_copy_callback): Update.
	* gnu-nat.c (gnu_xfer_memory): Update.
	* mips-linux-nat.c (mips_show_dr): Update.
	* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
	monitor_remove_breakpoint): Update.
	* remote.c (compare_sections_command): Update.
	* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
	m32r_remove_breakpoint, m32r_insert_watchpoint,
	m32r_remove_watchpoint): Update.
	* sol-thread.c (info_cb): Update.
	* symfile.c (load_progress): Update.

	Update callers of paddress or paddr_nz to use hex_string instead
	(changes output of internal/error/debug messages only):
	* dwarf2read.c (dump_die_shallow): Update.
	* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
	get_frame_func, create_new_frame): Update.
	* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
	* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
	ia64_get_dyn_info_list): Update.
	* maint.c (maintenance_translate_address): Update.
	* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
	* target.c (target_flash_erase): Update.

	Update callers of paddr/paddr_nz to use phex/phex_nz instead,
	using an appropriate address size.  Remove use of strlen_paddr.
	* exec.c (exec_files_info): Update.
	* i386-nat.c (i386_show_dr): Update.
	* remote.c (remote_flash_erase): Update.
	* m32r-rom.c (m32r_load_section): Update.
	* monitor.c (monitor_vsprintf, monitor_store_register): Update.
	* remote.c (remote_check_symbols, remote_search_memory): Update.
	* remote-mips.c (mips_request, mips_common_breakpoint): Update.
	* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
	* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
	* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
	sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
	sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
	sh_dsp_show_regs): Update.
	* xcoffsolib.c (sharedlibrary_command): Update.


	* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
	Use hex_string_custom instead of paddr.
	(print_bfd_section_info): Pass address size.
	(print_objfile_section_info): Likewise.

	* annotate.h (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* annotate.c (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* source.c (identify_source_line): Update call to annotate_source.
	* stack.c (print_frame_info, print_frame): Update call to
	annotate_frame_begin.

	* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
	(create_breakpoint, create_ada_exception_breakpoint): Update call.

	* stack.c (print_block_frame_labels): Add GDBARCH parameter.
	(print_frame_label_vars): Update call.

	* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
	(dump_psymtab): Update call to print_partial_symbols.
	(struct print_symbol_args): Add GDBARCH member.
	(dump_symtab_1): Set print_symbol_args architecture member.
	(print_symbol): Use it.

	* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
	parameter.
	* windows-tdep.c (windows_xfer_shared_library): Likewise.
	* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
	(core_process_module_section): Pass architecture from cpms_data to
	windows_xfer_shared_library.
	(windows_core_xfer_shared_libraries): Initialize cmps_data
	architecture member.
	* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
	to windows_xfer_shared_library.

	* defs.h (print_address): Add GDBARCH parameter.
	* printcmd.c (print_address): Add GDBARCH parameter.
	(print_scalar_formatted, do_examine): Update call.
	* findcmd.c (find_command): Update call.
	* tracepoint.c: Include "arch-utils.h".
	(trace_find_line_command): Update call.
	* tui/tui-disasm.c (tui_disassemble): Update call.

	* value.h (print_address_demangle): Add GDBARCH parameter.
	* printcmd.c (print_address_demangle): Add GDBARCH parameter.
	* c-valprint.c (print_function_pointer_address, c_val_print):
	Update call.
	* f-valprint.c (f_val_print): Update call.
	* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
	* jv-valprint.c (java_val_print): Update call.
	* m2-valprint.c (print_function_pointer_address, m2_val_print):
	Update call.
	* p-valprint.c (pascal_val_print): Update call.

	* disasm.c (gdb_disassemble_info): Install architecture into
	di.application_data field.

testsuite/ChangeLog:

	* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
	change to prefix TLS offset in hex with 0x.

doc/ChangeLog:

	* gdbint.texinfo (Item Output Functions): Update signature
	for ui_out_field_core_addr.
 2009-07-02 17:21:10 +00:00
Ulrich Weigand
a6d9a66e23 * breakpoint.h (struct breakpoint): New member GDBARCH. 
* breakpoint.c: Include "arch-utils.h".
	(set_raw_breakpoint_without_location): Add GDBARCH parameter.
	Use it to set breakpoint architecture.
	(set_raw_breakpoint): Add GDBARCH parameter.
	(create_internal_breakpoint): Likewise.
	(create_catchpoint): Likewise.
	(create_fork_vfork_event_catchpoint): Likewise.
	(create_breakpoint): Likewise.
	(create_breakpoints): Likewise.
	(break_command_really): Likewise.
	(create_ada_exception_breakpoint): Likewise.
	Update local callers to pass architecture:
	(create_internal_breakpoint): Update.
	(create_overlay_event_breakpoint): Update.
	(create_longjmp_master_breakpoint): Update.
	(create_thread_event_breakpoint): Update.
	(create_solib_event_breakpoint): Update.
	(create_catchpoint): Update.
	(create_fork_vfork_event_catchpoint): Update.
	(set_momentary_breakpoint): Update.
	(clone_momentary_breakpoint): Update.
	(create_breakpoint): Update.
	(create_breakpoints): Update.
	(break_command_really): Update.
	(break_command_1): Update.
	(set_breakpoint): Update.
	(watch_command_1): Update.
	(catch_fork_command_1): Update.
	(catch_exec_commnd_1): Update.
	(handle_gnu_v3_exceptions): Update.
	(create_ada_exception_breakpoint): Update.
	(catch_ada_exception_command): Update.
	(catch_assert_command): Update.
	(trace_command): Update.

	* breakpoint.h (struct bp_location): New member GDBARCH.
	* breakpoint.c (get_sal_arch): New function.
	(set_raw_breakpoint): Set location architecture.
	(add_location_to_breakpoint): Likewise.
	(clone_momentary_breakpoint): Likewise.
	(watch_command_1): Likewise.
	(update_watchpoint): Likewise.
	(bp_loc_is_permanent): Use location architecture instead of
	current_gdbarch.
	(adjust_breakpoint_address): Add GDBARCH parameter; use it
	instead of current_gdbarch.
	Update callers of adjust_breakpoint_address to pass
	breakpoint location architecture:
	(set_raw_breakpoint): Update.
	(watch_command_1): Update.

        * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
	of current_gdbarch.
	(add_local_symbols): Add GDBARCH parameter.  Pass to collect_symbol.
	(encode_actions): Pass tracepoint architecture to add_local_symbols
	(encode_actions): Use tracepoint architecture instead of
	current_gdbarch.  Pass it to add_local_symbols and collect_symbol.

	* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
	of print_one callback with last_loc.
	* breakpoint.c (print_one_breakpoint_location): Replace last_addr
	parameter with last_loc.
	(print_one_breakpoint): Likewise.
	(do_captured_breakpoint_query): Update call.
	(breakpoint_1): Pass last_loc instead of last_addr to
	print_one_breakpoint.  Pass last location architecture instead of
	current_gdbarch to set_next_address.
	Update all implementations of the print_one callback:
	* breakpoint.c (print_one_catch_fork): Update.
	(print_one_catch_vfork): Update.
	(print_one_catch_exec): Update.
	(print_one_exception_catchpoint): Update.
	* ada-lang.c (print_one_exception): Update.
	(print_one_catch_exception): Update.
	(print_one_catch_exception_unhandled): Update.
	(print_one_catch_assert): Update.

	* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
	parameter.  Use it instead of gdbarch_addr_bit (current_gdbarch).
	(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
	to print_one_breakpoint_location.
	(breakpoint_address_bits): New function.
	(do_captured_breakpoint_query): Compute number of address bits to print
	and pass it to print_one_breakpoint.
	(breakpoint_1): Likewise.  Use it instead of current_gdbarch.

	* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_thread_event_breakpoint): Likewise.
	Update callers to create_thread_event_breakpoint:
	* aix-thread.c (pd_enable): Update.
	* linux-thread-db.c (enable_thread_event): Update.

	* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_solib_event_breakpoint): Likewise.
	Update callers to create_solib_event_breakpoint:
	* solib-frv.c (enable_break, enable_break2): Update.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
	* solib-som.c (som_solib_create_inferior_hook): Update.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
	* solib-svr4.c (enable_break): Update.

	* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
	* breakpoint.c (insert_single_step_breakpoint): Likewise.
	Update callers to insert_single_step_breakpoint:
	* alpha-tdep.c (alpha_software_single_step): Update.
	* arm-linux-tdep.c (arm_linux_software_single_step): Update.
	* arm-tdep.c (arm_software_single_step): Update.
	* cris-tdep.c (cris_software_single_step): Update.
	* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
	* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
	* sparc-tdep.c (sparc_software_single_step): Update.
	* spu-tdep.c (spu_software_single_step): Update.
	* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
	Pass it to insert_single_step_breakpoint.
	(mips_software_single_step): Pass architecture to
	deal_with_atomic_sequence and insert_single_step_breakpoint.

	* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	Update callers to deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint:
	* breakpoint.c (single_step_gdbarch): New static variable.
	(insert_single_step_breakpoint): Pass GDBARCH parameter to
	deprecated_insert_raw_breakpoint.  Store it in single_step_gdbarch.
	(remove_single_step_breakpoints): Pass architecture stored in
	single_step_gdbarch to deprecated_remove_raw_breakpoint.
	* rs6000-nat.c (exec_one_dummy_insn): Update.
	* solib-irix.c (enable_break, disable_break): Update.
	* procfs.c (procfs_mourn_inferior): Update.
	(remove_dbx_link_breakpoint): Update.

	* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	Update callers to set_breakpoint, set_momentary_breakpoint and
	set_momentary_breakpoint_at_pc:
	* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
	(until_break_command): Update.
	* infcall.c (call_function_by_hand): Update.
	* infcmd.c (finish_backward, finish_forward): Update.
	* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
	parameter.  Pass it to set_momentary_breakpoint.
	(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
	Pass it to set_momentary_breakpoint_at_pc.
	(handle_inferior_event): Update.
	(insert_step_resume_breakpoint_at_frame): Update.
	(insert_step_resume_breakpoint_at_caller): Update..
	* mi/mi-cmd-break.c: Include "arch-utils.h".
	(mi_cmd_break_insert): Update.

	* target.h (struct target_ops): Add GDBARCH parameter to
	to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
	and to_remove_hw_breakpoint members.
	(target_insert_breakpoint, target_remove_breakpoint,
	target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
	parameter, pass to target routine.
	(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
	parameter.
	* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
	debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
	GDBARCH parameter, pass to target routine.
	(update_current_target): Update function signature.
	* breakpoint.c (insert_bp_location, remove_breakpoint,
	deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
	Pass architecture to target_ routines.
	Update all implementations of the target breakpoint routines to take
	GDBARCH parameter and use it instead of GDBARCH as appropriate:
	* corelow.c (ignore): Update.
	* exec.c (ignore): Update.
	* mem-break.c (memory_insert_breakpoint): Update.
	(memory_remove_breakpoint): Update.
	* monitor.c (monitor_insert_breakpoint): Update.
	(monitor_remove_breakpoint): Update.
	* record.c (record_insert_breakpoint): Update.
	(record_beneath_to_insert_breakpoint): Update.
	(record_remove_breakpoint): Update.
	(record_beneath_to_remove_breakpoint): Update.
	* remote.c (remote_insert_breakpoint): Update.
	(remote_remove_breakpoint): Update.
	(remote_insert_hw_breakpoint): Update.
	(remote_remove_hw_breakpoint): Update.
	* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
	(m32r_remove_breakpoint): Update.
	* remote-mips.c (mips_insert_breakpoint): Update.
	(mips_remove_breakpoint): Update.
	* i386-nat.c (i386_insert_hw_breakpoint): Update.
	(i386_remove_hw_breakpoint): Update.
	* nto-procfs.c (procfs_insert_breakpoint):  Update.
	(procfs_remove_breakpoint): Update.
	(procfs_insert_hw_breakpoint): Update.
	(procfs_remove_hw_breakpoint): Update.

doc/ChangeLog:

	* gdbint.texi (Examples of Use of @code{ui_out} functions):
	Update example code extrated from breakpoint.c.
 2009-07-02 17:12:28 +00:00
Ulrich Weigand
270677457f * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double, 
builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
	builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
	(init_float_type, init_complex_type): Add prototypes.
	* gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
	builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
	builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
	(_initialize_gdbtypes): Do not initialize them.
	(build_flt): Rename to ...
	(init_float_type): ... this.  Make global.
	(build_complex): Rename to ...
	(init_complex_type): ... this.  Make global.  Remove BIT argument.
	(gdbtypes_post_init): Update calls.

	* ada-lang.c (ada_language_arch_info): Use init_float_type.
	* jv-lang.c (build_java_types): Likewise.
	* m2-lang.c (build_m2_types): Likewise.
	* f-lang.c (build_fortran_types): Use init_float_type and
	init_complex_type.

	* target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
	of using builtin_type_ieee_single, builtin_type_ieee_double, or
	builtin_type_arm_ext.

	* ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
	* ia64-tdep.c (builtin_type_ia64_ext): Remove.
	(_initialize_ia64_tdep): Do not initialize it.
	(floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
	Move up.
	(ia64_ext_type): New function.
	(ia64_register_reggroup_p, ia64_convert_register_p,
	ia64_register_to_value, ia64_value_to_register,
	ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
	instead of builtin_type_ia64_ext.

	* i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
	(i387_ext_type): Add prototype.
	* i386-tdep.c (i387_ext_type): New function.
	(i386_extract_return_value, i386_store_return_value,
	i386_register_type): Use it instead of builtin_type_i387_ext.
	* amd64-tdep.c (amd64_register_type): Likewise.
	* i387-tdep.c (print_i387_value, i387_register_to_value,
	i387_value_to_register): Likewise.
	(print_i387_value, print_i387_ext): Add GDBARCH argument.
	(print_i387_ext, i387_print_float_info): Pass to subroutines.

	* m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
	* m68k-tdep.c (m68881_ext_type): New function.
	(m68k_register_type, m68k_convert_register_p): Use it instead
	of builtin_type_m68881_ext.

	* arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
	* arm-tdep.c (arm_ext_type): New function.
	(arm_register_type): Use it instead of builtin_type_arm_ext.

	* alpha-tdep.c (alpha_register_type): Use builtin types
	instead of builtin_type_ieee_double.

	* mips-tdep.c (mips_float_register_type, mips_double_register_type):
	Remove.
	(mips_register_type): Use builtin types instead of
	builtin_type_ieee_single and builtin_type_ieee_double.
	(mips_print_fp_register): Use builtin types instead of
	mips_float_register_type and mips_double_register_type.

	* hppa-tdep.c (hppa32_register_type, hppa64_register_type):
	Use builtin types instead of builtin_type_ieee_single and
	builtin_type_ieee_double.
 2009-07-02 12:48:54 +00:00
Ulrich Weigand
df4df182b4 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8, 
builtin_type_int16, builtin_type_uint16, builtin_type_int32,
	builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
	builtin_type_int128, builtin_type_uint128): Remove.
	(struct builtin_type): New members builtin_int0, builtin_int8,
	builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
	builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
	and builtin_uint128.
	* gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
	builtin_type_int16, builtin_type_uint16, builtin_type_int32,
	builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
	builtin_type_int128, builtin_type_uint128): Remove.
	(_initialize_gdbtypes): Do not initialize them.
	(gdbtypes_post_init): Initialize fixed-size integer types.

	* dwarf2expr.c (unsigned_address_type, signed_address_type): Add
	GDBARCH argument.  Return platform-specific type.
	(dwarf2_read_address, execute_stack_op): Update calls.

	* target-descriptions.c (tdesc_gdb_type): Use platform-specific types
	instead of global builtin_int_... variables.
	* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
	* printcmd.c (do_examine): Likewise.
	* jv-exp.y (parse_number): Likewise.

	* alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
	alpha_store_return_value): Likewise.
	* amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
	* amd64-tdep.c (amd64_register_type): Likewise.
	* arm-tdep.c (arm_register_type): Likewise.
	* avr-tdep.c (avr_register_type): Likewise.
	* cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
	* frv-tdep.c (frv_register_type): Likewise.
	* h8300-tdep.c h8300_register_type): Likewise.
	* hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
	hppa64_register_type): Likewise.
	* i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
	* iq2000-tdep.c (iq2000_register_type): Likewise.
	* lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
	* m32r-tdep.c (m32r_register_type): Likewise.
	* m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
	m68hc11_pseudo_register_write): Likewise.
	* m68k-tdep.c (m68k_register_type): Likewise.
	* m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
	* mep-tdep.c (mep_register_type): Likewise.
	* mips-tdep.c (mips_register_type, mips_pseudo_register_type,
	mips_print_fp_register): Likewise.
	* moxie-tdep.c (moxie_register_type): Likewise.
	* mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
	* rs6000-tdep.c (rs6000_builtin_type_vec64,
	rs6000_builtin_type_vec128): Likewise.
	* score-tdep.c (score_register_type): Likewise.
	* sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
	Likewise.
	* sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
	Likewise.
	* spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
	* v850-tdep.c (v850_register_type): Likewise.
	* xstormy16-tdep.c (xstormy16_register_type): Likewise.
	* xtensa-tdep.c (xtensa_register_type): Likewise.

	* mt-tdep.c (struct gdbarch_tdep): New data structure.
	(mt_gdbarch_init): Alloc TDEP structures.
	(mt_register_type): Cache coprocessor type in TDEP instead of
	static global variable.

	* xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
	* xtensa-tdep.c (type_entries): Remove.
	(xtensa_register_type): Cache fixed-size types in TDEP instead
	of in global variable.
 2009-07-02 12:46:19 +00:00
Ulrich Weigand
d80b854b33 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter, 
use it instead of current_gdbarch.
	* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
	* arm-tdep.c (arm_skip_prologue): Pass architecture to
	deprecated_pc_in_call_dummy.

	* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
	Use it instead of current_gdbarch.
	* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
	* breakpoint.c (expand_line_sal_maybe): Pass architecture to
	skip_prologue_using_sal.
	* arm-tdep.c (skip_prologue_using_sal): Likewise.
	* lm32-tdep.c (lm32_skip_prologue): Likewise.
	* m32-tdep.c (m32c_skip_prologue): Likewise.
	* mips-tdep.c (mips_skip_prologue): Likewise.
	* moxie-tdep.c (moxie_skip_prologue): Likewise.
	* mt-tdep.c (mt_frame_unwind_cache): Likewise.
	* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
	* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
	it to skip_prologue_using_sal.  Update call sites ...
	(frv_skip_prologue, frv_frame_unwind_cache): ... here.

	* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
	(check_for_saved): Use it instead of current_gdbarch.
	(mn10300_analyze_prologue): Set it.

	* value.c (using_struct_return): Add GDBARCH parameter.  Use it
	instead of current_gdbarch.
	* value.h (using_struct_return): Add GDBARCH parameter.
	* eval.c (evaluate_subexp_standard): Pass architecture to
	using_struct_return.
	* infcall.c (call_function_by_hand): Likewise.
	* stack.c (return_command): Likewise.
	* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

	* symtab.c (in_prologue): Add GDBARCH parameter.  Use it instead of
	current_gdbarch.
	* symtab.h (in_prologue): Add GDBARCH parameter.
	* infrun.c (handle_inferior_event): Pass architecture to in_prologue.

	* eval.c (evaluate_subexp_standard): Use expression architecture
	instead of current_gdbarch.

	* c-lang.c (evaluate_subexp_c): Use expression architecture and
	language instead of current_gdbarch and current_language.

	* printcmd.c (do_one_display): Use expression architecture instead
	of current_gdbarch.

	* infcmd.c (print_return_value): Use architecture of stop_regcache
	instead of current_gdbarch.
	(print_vector_info, print_float_info): Remove GDBARCH argument,
	use frame architecture instead.
	(vector_info, float_info): Update calls.

	* objc-lang.c (objc_skip_trampoline): Use frame architecture
	instead of current_gdbarch.

	* parse.c (write_dollar_variable): Use parse architecture instead
	of current_gdbarch.

	* source.c (line_info): Use objfile architecture instead of
	current_gdbarch.

	* symtab.c (find_function_start_sal): Use gdbarch instead of
	current_gdbarch.
	(print_msymbol_info): Use objfile architecture instead of
	current_gdbarch.

	* valops.c (value_assign): Use frame architecture instead of
	current_gdbarch.
 2009-06-17 18:43:24 +00:00
Tom Tromey
42ae523077 2009-05-27 Tom Tromey <tromey@redhat.com> 
Paul Pluzhnikov  <ppluzhnikov@google.com>

	* mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
	value_address.
	* cli/cli-dump.c (dump_value_to_file): Use value_address.
	* valprint.c (common_val_print): Likewise.
	* v850-tdep.c (v850_push_dummy_call): Use value_address.
	* tracepoint.c (encode_actions): Use value_address.
	* printcmd.c (print_formatted): Use value_address.
	(x_command): Likewise.
	* p-valprint.c (pascal_object_print_static_field): Use
	value_address.
	* mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
	* mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
	* m32r-tdep.c (m32r_push_dummy_call): Use value_address.
	* jv-valprint.c (java_value_print): Use value_address.
	* infcall.c (find_function_addr): Use value_address.
	* gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
	* gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
	* frv-tdep.c (frv_push_dummy_call): Use value_address.
	* frame.c (frame_register_unwind): Use value_address.
	(frame_unwind_register_value): Likewise.
	* darwin-nat-info.c (info_mach_region_command): Use
	value_address.
	* cp-valprint.c (cp_print_static_field): Use value_address.
	* c-valprint.c (c_value_print): Use value_address.
	* breakpoint.c (update_watchpoint): Use value_address.
	(can_use_hardware_watchpoint): Likewise.
	* ada-valprint.c (ada_val_print_1): Use value_address.
	(ada_value_print): Likewise.
	* ada-tasks.c (read_fat_string_value): Use value_address.
	* jv-lang.c (java_link_class_type): Use set_value_address.
	(java_link_class_type): Likewise.
	(get_java_utf8_name): Use value_address.
	(type_from_class): Likewise.
	(java_link_class_type): Likewise.
	* findvar.c (value_of_register): Use set_value_address.
	(read_var_value): Likewise.
	(read_var_value): Likewise.
	* eval.c (evaluate_subexp_standard): Use set_value_address.
	(evaluate_subexp_standard): Use value_address.
	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
	* ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
	(ada_value_primitive_packed_val): Likewise.
	(ensure_lval): Likewise.
	(thin_data_pntr): Use value_address.
	(desc_bounds): Likewise.
	(ada_value_primitive_packed_val): Likewise.
	(value_assign_to_component): Likewise.
	(ensure_lval): Likewise.
	(make_array_descriptor): Likewise.
	(ada_to_fixed_value): Likewise.
	(unwrap_value): Likewise.
	* value.c (deprecated_value_address_hack): Remove.
	(value_address): New function.
	(value_raw_address): Likewise.
	(set_value_address): Likewise.
	(value_fn_field): Use set_value_address.
	(value_from_contents_and_address): Likewise.
	(value_fn_field): Likewise.
	(allocate_value_lazy): Don't use VALUE_ADDRESS.
	(value_as_address): Use value_address.
	(value_static_field): Likewise.
	* valops.c (search_struct_field): Use set_value_address.
	(value_at): Likewise.
	(value_at_lazy): Likewise.
	(value_repeat): Likewise.
	(value_cast_structs): Use value_address.
	(value_cast): Likewise.
	(value_fetch_lazy): Likewise.
	(value_assign): Likewise.
	(value_repeat): Likewise.
	(address_of_variable): Likewise.
	(value_coerce_array): Likewise.
	(value_coerce_function): Likewise.
	(value_addr): Likewise.
	(search_struct_field): Likewise.
	(search_struct_method): Likewise.
	(find_method_list): Likewise.
	(value_struct_elt_for_reference): Likewise.
	(value_full_object): Likewise.
	* jv-valprint.c (java_value_print): Use set_value_address.
	* value.h (deprecated_value_address_hack): Remove.
	(VALUE_ADDRESS): Remove.
	(value_address): Declare.
	(value_raw_address): Declare.
	(set_value_address): Declare.
 2009-05-28 00:53:52 +00:00
Pierre Muller
d92524f1ee Unify target macros. 
* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
	(target_stoppped_by_watchpoint): New macro.
	(HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
	(target_have_steppable_watchpoint): New macro.
	(HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
	(target_have_continuable_watchpoint): New macro.
	(TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
	(target_can_use_hardware_watchpoint): New macro.
	(TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
	(target_region_ok_for_hw_watchpoint): New macro.

	* breakpoint.c (update_watchpoint): Use new macros.
	(bpstat_alloc): Likewise.
	(create_breakpoint): Likewise.
	(watch_command_1): Likewise.
	(can_use_hardware_watchpoint): Likewise.
	(do_enable_breakpoint): Likewise.
	* infrun.c (handle_inferior_event): Adapt to new macros.
	* mips-tdep.c (mips_gdbarch_init): Update comments.
	* procfs.c (procfs_set_watchpoint): Update comment.
	(procfs_insert_watchpoint): Adapt to new macros.
	* remote-m32r-sdi.c (m32r_stop):
	* remote-mips.c (mips_remove_breakpoint):
	* target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
	(debug_to_stopped_by_watchpoint): Likewise.
 2009-05-11 11:13:09 +00:00
Ulrich Weigand
fb14de7bbd * inferior.h (read_pc, write_pc): Remove. 
* regcache.c (read_pc, write_pc): Remove.

	* infrun.c (displaced_step_fixup): Use regcache_read_pc instead
	of read_pc.
	(handle_inferior_event): Use regcache_read_pc instead of read_pc
	when determining value of stop_pc.  Replace subsequent uses of
	read_pc by inspecting already-retrieved stop_pc value.
	(keep_going): Use regcache_read_pc instead of read_pc.

	* breakpoint.c (watchpoint_check): Use current frame architecture
	and PC instead of current_gdbarch and read_pc ().
	* tracepoint.c (set_traceframe_context): Replace PC argument
	with FRAME argument.
	(trace_start_command, finish_tfind_command): Update calls.
	(finish_tfind_command): Compare frame IDs to identify transitions
	between frames.
	(trace_find_pc_command): Use regcache_read_pc instead of read_pc.
	* rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
	of gdbarch.  Use regcache_read_pc and regcache_write_pc instead
	of read_pc and write_pc.
	(store_register): Make regcache argument non-const.  Update call
	to exec_one_dummy_insn.

	* thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
	* infcmd.c (post_create_inferior): Likewise.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
	* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
	* solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
	* linux-fork.c (fork_load_infrun_state): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
	* record.c (record_wait): Likewise.
	* procfs.c (procfs_wait): Likewise.
	* remote-mips.c (common_open, mips_wait): Likewise.
	* remote-m32r-sdi.c (m32r_resume): Likewise.

	* symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
	* monitor.c (monitor_create_inferior, monitor_load): Likewise.
	* m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
	* remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
	* remote-mips.c (mips_create_inferior, mips_load): Likewise.

	* solib-darwin.c: Include "regcache.h".
	* solib-pa64.c: Include "regcache.h".
	* solib-svr4.c: Include "regcache.h.".

	* symfile.c: Do not mention read_pc or write_pc in comments.
	* dink32-rom.c: Likewise.
	* m32r-rom.c: Likewise.
	* mips-tdep.c: Likewise.
 2009-05-05 13:24:49 +00:00
Aleksandar Ristovski
865093a3bf * mips-tdep.c (mips_numeric_register_alieses): New definition. 
(mips_gdbarch_init): Add user registers from
mips_numeric_register_aliases.
 2009-04-01 19:13:42 +00:00
Pedro Alves
63807e1d0d Silence a few -Wmissing-prototypes warnings. 
PR build/9877:
        * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
	it static.
        * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
        * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
        * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
	(_initialize_amd64nbsd_tdep): ... this.
	* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
	(_initialize_arm_linux_tdep): Declare.
	* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
	* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
	* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
	* avr-tdep.c (avr_return_value): Make it static.
	(avr_frame_unwind_cache): Ditto.
	* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
	(bsd_uthread_solib_loaded): Ditto.
	(bsd_uthread_solib_unloaded): Ditto.
	(bsd_uthread_target): Ditto.
	(_initialize_bsd_uthread): Declare.
	* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
	(cris_frame_unwind_cache): Ditto.
	* frv-tdep.c (frv_return_value): Ditto.
	* h8300-tdep.c (h8300_use_struct_convention): Ditto.
	(h8300h_use_struct_convention): Ditto.
	* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
	Ditto.
	* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
	declarations.
	* hppabsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_find_global_pointer): Make it static.
	* hppabsd-tdep.h: New.
	* hppanbsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Remove declaration.
	(_initialize_hppabsd_tdep): Remove declaration.
	(_initialize_hppanbsd_tdep): Declare.
	* hppaobsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Delete declaration.
	(hppaobsd_init_abi): Make it static.
	* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
	* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
	* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
	* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
	* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
	* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
	(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
	(_initialize_m32c_tdep): Declare.
	* m32r-rom.c (_initialize_m32r_rom): Declare.
	* m32r-tdep.c (m32r_skip_prologue): Make it static.
	(m32r_return_value): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
	(m68hc11_return_value): Ditto.
	* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
	* m88k-tdep.c (m88k_frame_cache): Make it static.
	* mep-tdep.c (mep_gdb_print_insn): Ditto.
	(mep_return_value): Ditto.
	(_initialize_mep_tdep): Declare.
	* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
	* mips-linux-tdep.c (supply_64bit_reg): Make it static.
	(mips_linux_syscall_next_pc): Ditto.
	(_initialize_mips_linux_tdep): Declare.
	* mips-tdep.c (mips_single_step_through_delay): Make it static.
	* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
	* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
	* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
	* mt-tdep.c (_initialize_mt_tdep): Declare.
	* nbsd-tdep.c: Include nbsd-tdep.h.
	* nto-tdep.c (find_load_phdr): Make it static.
	(_initialize_nto_tdep): Declare.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
	static.
	(_initialize_ppc_linux_tdep): Declare.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
	(m32r_insert_watchpoint, m32r_remove_watchpoint)
	(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
	static.
	* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
	* rs6000-nat.c: Include xcoffread.h.
	(find_toc_address): Don't extern declare get_toc_offset.  Adjust
	to call xcoff_get_to_offset.
	* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
	(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
	(rs6000_skip_trampoline_code): Make static.
	* s390-tdep.c (s390_regset_from_core_section): Ditto.
	* sh-tdep.c (sh_register_reggroup_p): Ditto.
	* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
	(_initialize_shnbsd_tdep): Declare.
	* solib-frv.c (displacement_from_map): Make static.
	(_initialize_frv_solib): Declare.
	* solib-irix.c (fetch_lm_info): Make static.
	(_initialize_irix_solib): Declare.
	* solib-som.c: Include solib-som.h.
	(som_solib_select): Line break.
	* sparc-tdep.c (sparc_regset_from_core_section): Make static.
	* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
	(_initialize_sparcnbsd_tdep): ... this.
	* spu-tdep.c (spu_software_single_step): Make it static.
	(_initialize_spu_tdep): Declare.
	* vax-tdep.c (vax_frame_cache): Make it static.
	* xcoffread.c: Include xcoffread.h.
	(get_toc_offset): Rename to ...
	(xcoff_get_toc_offset): ... this.
	(_initialize_xcoffread): Declare.
	* xcoffread.h: New.
	* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
	* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
	static.
	(_initialize_xtensa_tdep): Declare.
 2009-02-22 01:02:20 +00:00
Joel Brobecker
0fb0cc7590 Updated copyright notices for most files. 2009-01-03 05:58:08 +00:00
Tom Tromey
79a45b7d67 gdb 
* varobj.c (value_get_print_value): Include valprint.h.
	(value_get_print_value): Use get_formatted_print_options.
	* value.h (struct value_print_options): Declare.
	(value_print, val_print, common_val_print, val_print_string):
	Update.
	* value.c: Include valprint.h.
	(show_values): Use get_user_print_options.
	(show_convenience): Likewise.
	* valprint.h (prettyprint_arrays, prettyprint_structs): Don't
	declare.
	(struct value_print_options): New type.
	(vtblprint, unionprint, addressprint, objectprint, print_max,
	inspect_it, repeat_count_threshold, output_format,
	stop_print_at_null): Don't declare.
	(user_print_options, get_user_print_options,
	get_raw_print_options, get_formatted_print_options): Declare.
	(print_array_indexes_p): Don't declare.
	(maybe_print_array_index, val_print_array_elements): Update.
	* valprint.c (print_max): Remove.
	(user_print_options): New global.
	(get_user_print_options, get_raw_print_options,
	get_formatted_print_options): New functions.
	(print_array_indexes, repeat_count_threshold, stop_print_at_null,
	prettyprint_structs, prettyprint_arrays, unionprint,
	addressprint): Remove.
	(val_print): Remove format, deref_ref, pretty arguments; add
	options.  Update.
	(common_val_print): Likewise.
	(print_array_indexes_p): Remove.
	(maybe_print_array_index): Remove format, pretty arguments; add
	options.  Update.
	(val_print_array_elements): Remove format, deref_ref, pretty
	arguments; add options.  Update.
	(val_print_string): Add options argument.  Update.
	(_initialize_valprint): Use user_print_options.
	(output_format): Remove.
	(set_output_radix_1): Use user_print_options.
	* typeprint.c: Include valprint.h.
	(objectprint): Don't declare.
	(whatis_exp): Use get_user_print_options.
	* tui/tui-regs.c: Include valprint.h.
	(tui_register_format): Use get_formatted_print_options.
	* tracepoint.c: Include valprint.h.
	(addressprint): Don't declare.
	(trace_mention): Use get_user_print_options.
	(tracepoints_info): Likewise.
	* stack.c (print_frame_args): Use get_raw_print_options.
	(print_frame_info): Use get_user_print_options.
	(print_frame): Likewise.
	* sh64-tdep.c: Include valprint.h
	(sh64_do_register): Use get_formatted_print_options.
	* scm-valprint.c (scm_inferior_print): Remove format, deref_ref,
	pretty arguments; add options.
	(scm_scmlist_print): Likewise.  Update.
	(scm_scmval_print): Likewise.
	(scm_val_print): Likewise.
	(scm_value_print): Remove format, pretty arguments; add options.
	Update.
	* scm-lang.h (scm_value_print, scm_val_print, scm_scmval_print):
	Update.
	* scm-lang.c (scm_printstr): Add options argument.
	* python/python-value.c: Include valprint.h.
	(valpy_str): Use get_user_print_options.
	* printcmd.c: Include valprint.h.
	(addressprint): Don't declare.
	(inspect_it): Remove.
	(print_formatted): Remove format option; add options.  Update.
	(print_scalar_formatted): Likewise.
	(print_address_demangle): Use get_user_print_options.
	(do_examine): Use get_formatted_print_options.
	(print_command_1): Likewise.
	(output_command): Use get_formatted_print_options.
	(do_one_display): Likewise.
	(print_variable_value): Use get_user_print_options.
	* p-valprint.c (pascal_val_print): Remove format, deref_ref,
	pretty arguments; add options.  Update.
	(pascal_value_print): Remove format, pretty arguments; add
	options.  Update.
	(vtblprint, objectprint): Don't declare.
	(pascal_static_field_print): Remove.
	(pascal_object_print_value_fields): Remove format, pretty
	arguments; add options.  Update.
	(pascal_object_print_static_field): Likewise.
	(_initialize_pascal_valprint): Use user_print_options.  Update.
	* p-lang.h (pascal_val_print, pascal_value_print,
	pascal_printstr, pascal_object_print_value_fields): Update.
	(vtblprint, static_field_print): Don't declare.
	* p-lang.c (pascal_printstr): Add options argument.  Update.
	* objc-lang.c (objc_printstr): Add options argument.  Update.
	* mt-tdep.c: Include valprint.h.
	(mt_registers_info): Use get_raw_print_options.
	* mips-tdep.c: Include valprint.h.
	(mips_print_fp_register): Use get_formatted_print_options.
	(mips_print_register): Likewise.
	* mi/mi-main.c: Include valprint.h.
	(get_register): Use get_user_print_options.
	(mi_cmd_data_evaluate_expression): Likewise.
	(mi_cmd_data_read_memory): Use get_formatted_print_options.
	* mi/mi-cmd-stack.c: Include valprint.h.
	(list_args_or_locals): Use get_raw_print_options.
	* m2-valprint.c (print_function_pointer_address): Add addressprint
	argument.
	(m2_print_long_set): Remove format, pretty arguments.
	(m2_print_unbounded_array): Remove format, deref_ref, pretty
	arguments; add options.  Update.
	(print_unpacked_pointer): Remove format argument; add options.
	Now static.  Update.
	(print_variable_at_address): Remove format, deref_ref, pretty
	arguments; add options.  Update.
	(m2_print_array_contents): Likewise.
	(m2_val_print): Likewise.
	* m2-lang.h (m2_val_print): Update.
	* m2-lang.c (m2_printstr): Add options argument. Update.
	* language.h (struct value_print_options): Declare.
	(struct language_defn) <la_printstr>: Add options argument.
	<la_val_print>: Remove format, deref_ref, pretty argument; add
	options.
	<la_value_print>: Remove format, pretty arguments; add options.
	<la_print_array_index>: Likewise.
	(LA_VAL_PRINT, LA_VALUE_PRINT, LA_PRINT_STRING,
	LA_PRINT_ARRAY_INDEX): Update.
	(default_print_array_index): Update.
	* language.c (default_print_array_index): Remove format, pretty
	arguments; add options.  Update.
	(unk_lang_printstr): Add options argument.
	(unk_lang_val_print): Remove format, deref_ref, pretty arguments;
	add options.
	(unk_lang_value_print): Remove format, pretty arguments; add
	options.
	* jv-valprint.c (java_value_print): Remove format, pretty
	arguments; add options.  Update.
	(java_print_value_fields): Likewise.
	(java_val_print): Remove format, deref_ref, pretty arguments; add
	options.  Update.
	* jv-lang.h (java_val_print, java_value_print): Declare.
	* infcmd.c: Include valprint.h.
	(print_return_value): Use get_raw_print_options.
	(default_print_registers_info): Use get_user_print_options,
	get_formatted_print_options.
	(registers_info): Use get_formatted_print_options.
	* gdbtypes.h (struct value_print_options): Declare.
	(print_scalar_formatted): Update.
	* f-valprint.c (f77_print_array_1): Remove format, deref_ref,
	pretty arguments; add options.  Update.
	(f77_print_array): Likewise.
	(f_val_print): Likewise.
	* f-lang.h (f_val_print): Update.
	* f-lang.c (f_printstr): Add options argument.  Update.
	(c_value_print): Update declaration.
	* expprint.c: Include valprint.h.
	(print_subexp_standard): Use get_raw_print_options,
	get_user_print_options.
	* eval.c: Include valprint.h.
	(objectprint): Don't declare.
	(evaluate_subexp_standard): Use get_user_print_options.
	* cp-valprint.c (vtblprint, objectprint, static_field_print):
	Remove.
	(cp_print_value_fields): Remove format, pretty arguments; add
	options.  Update.
	(cp_print_value): Likewise.
	(cp_print_static_field): Likewise.
	(_initialize_cp_valprint): Use user_print_options.  Update.
	* c-valprint.c (print_function_pointer_address): Add addressprint
	argument.
	(c_val_print): Remove format, deref_ref, pretty arguments; add
	options.  Update.
	(c_value_print): Add options argument.  Update.
	* c-lang.h (c_val_print, c_value_print, c_printstr): Update.
	(vtblprint, static_field_print): Don't declare.
	(cp_print_value_fields): Update.
	* c-lang.c (c_printstr): Add options argument.  Update.
	* breakpoint.c: Include valprint.h.
	(addressprint): Don't declare.
	(watchpoint_value_print): Use get_user_print_options.
	(print_one_breakpoint_location): Likewise.
	(breakpoint_1, print_it_catch_fork, print_it_catch_vfork, mention,
	print_exception_catchpoint): Likewise.
	* auxv.c (fprint_target_auxv): Don't declare addressprint.  Use
	get_user_print_options.
	* ada-valprint.c (struct ada_val_print_args): Remove format,
	deref_ref, and pretty; add options.
	(print_optional_low_bound): Add options argument.
	(val_print_packed_array_elements): Remove format and pretty
	arguments; add options.  Update.
	(printstr): Add options argument.  Update.
	(ada_printstr): Likewise.
	(ada_val_print): Remove format, deref_ref, pretty arguments; add
	options argument.  Update.
	(ada_val_print_stub): Update.
	(ada_val_print_array): Remove format, deref_ref, pretty arguments;
	add options.  Update.
	(ada_val_print_1): Likewise.
	(print_variant_part): Likewise.
	(ada_value_print): Remove format, pretty arguments; add options.
	Update.
	(print_record): Likewise.
	(print_field_values): Likewise.
	* ada-lang.h (ada_val_print, ada_value_print, ada_printstr):
	Update.
	* ada-lang.c (ada_print_array_index): Add options argument; remove
	format and pretty arguments.
	(print_one_exception): Use get_user_print_options.
gdb/testsuite
	* gdb.base/exprs.exp (test_expr): Add enum formatting tests.
 2008-10-28 17:19:58 +00:00
Jan Kratochvil
5bc60cfb35 * mips-tdep.c (mips_n32n64_fp_arg_chunk_p): Update TYPE_FIELD_STATIC 
removed before.
 2008-10-21 19:34:44 +00:00
Daniel Jacobowitz
db5f024ecc * mips-linux-tdep.c (mips_linux_in_dynsym_resolve_code): Update 
comments.
	(mips_linux_skip_resolver): Also use glibc_skip_solib_resolver.
	(mips_linux_init_abi): Do not override skip_trampoline_code.
	* configure.tgt (mips*-*-linux*): Add glibc-tdep.o.
	* mips-tdep.c (mips32_scan_prologue): Stop scanning at branches.
	(mips_stub_frame_sniffer): Use the stub frame sniffer for PIC stubs.
	(mips_skip_mips16_trampoline_code): Rename from
	mips_skip_trampoline_code.
	(mips_skip_pic_trampoline_code, mips_skip_trampoline_code): New.
	* infrun.c (handle_inferior_event): Do not pass zero to
	in_solib_dynsym_resolve_code.
 2008-10-02 15:48:06 +00:00
Tom Tromey
b887350fc5 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Update. 
(scan_xcoff_symtab): Update.
	* mdebugread.c (record_minimal_symbol): Update.
	(parse_partial_symbols): Update.
	* elfread.c (record_minimal_symbol): Update.
	* dbxread.c (record_minimal_symbol): Update.
	* coffread.c (record_minimal_symbol): Update.
	* sh64-tdep.c (MSYMBOL_IS_SPECIAL): Redefine.
	(sh64_elf_make_msymbol_special): Update.
	* mips-tdep.c (mips_elf_make_msymbol_special): Use
	MSYMBOL_TARGET_FLAG_1.
	(mips_elf_make_msymbol_special): Likewise.
	(msymbol_is_special): Likewise.
	* minsyms.c (prim_record_minimal_symbol_and_info): Update.
	(install_minimal_symbols): Likewise.
	(prim_record_minimal_symbol): Update.
	(prim_record_minimal_symbol_and_info): Remove 'info' argument.
	* m68hc11-tdep.c (MSYMBOL_SET_RTC): Redefine.
	(MSYMBOL_SET_RTI): Redefine.
	(MSYMBOL_IS_RTC): Redefine.
	(MSYMBOL_IS_RTI): Redefine.
	* arm-tdep.c (MSYMBOL_SET_SPECIAL): Redefine.
	(MSYMBOL_IS_SPECIAL): Redefine.
	* symtab.h (struct minimal_symbol) <info>: Remove.
	<target_flag_1, target_flag_2>: New fields.
	(MSYMBOL_INFO): Remove.
	(MSYMBOL_TARGET_FLAG_1): New macro.
	(MSYMBOL_TARGET_FLAG_2): Likewise.
	(prim_record_minimal_symbol_and_info): Update.
 2008-10-01 16:41:27 +00:00
Pedro Alves
d6b48e9c8b Make the stop_soon global be per-inferior instead. 
* infcmd.c (attach_command_post_wait): Adjust.
	(attach_command): Likewise.

	* inferior.h (stop_soon): Delete.
	(struct inferior): Add stop_soon member.

	* infrun.c (stop_soon): Delete.
	(clear_proceed_status, start_remote)
	(fetch_inferior_event, handle_inferior_event): Adjust.
	(signal_stop_state): Don't check stop_soon here.  Check in callers
	instead.
	(save_inferior_status, restore_inferior_status): Adjust.

	* linux-nat.c (linux_nat_resume, linux_nat_wait): Always pass
	signals to common code if starting up the inferior.

	* inferior.h (struct inferior_info): Added stop_soon member.
	* inferior.c (add_inferior) Clear stop_soon.

	* mips-tdep.c (heuristic_proc_start): Adjust.
	* nto-procfs.c (procfs_create_inferior): Adjust.
	* solib-irix.c (irix_solib_create_inferior_hook): Adjust.
	* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
	* solib-sunos.c (sunos_solib_create_inferior_hook): Adjust.
	* solib-svr4.c (svr4_solib_create_inferior_hook): Adjust.

	* win32-nat.c (do_initial_win32_stuff): Adjust.

	* alpha-tdep.c (alpha_heuristic_proc_start): Adjust.
 2008-09-22 15:20:08 +00:00
Ulrich Weigand
0dfff4cba7 * alpha-tdep.c (alpha_register_type): Use builtin_type (gdbarch) 
instead of builtin_type_ macros.
	* amd64-tdep.c (amd64_register_type): Likewise.
	(amd64_get_longjmp_target): Likewise.
	* arm-tdep.c (arm_register_type): Likewise.
	* avr-tdep.c (avr_register_type): Likewise.
	* cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
	* frv-tdep.c (frv_register_type): Likewise.
	* h8300-tdep.c (h8300_register_type): Likewise.
	* hppa-tdep.c (hppa32_convert_from_func_ptr_addr,
	hppa_skip_trampoline_code): Likewise.
	* i386-tdep.c (i386_register_type): Likewise.
	(i386_unwind_pc, i386_sse_type): Likewise.
	* ia64-tdep.c (ia64_register_type): Likewise.
	* m32r-tdep.c (m32r_register_type): Likewise.
	* m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise.
	* m88k-tdep.c (m88k_register_type): Likewise.
	* mep-tdep.c (mep_register_type): Likewise.
	* mips-tdep.c (mips_pseudo_register_type): Likewise.
	* mn10300-tdep.c (mn10300_register_type): Likewise.
	* mt-tdep.c (mt_copro_register_type): Likewise.
	* rs6000-tdep.c (rs6000_builtin_type_vec64): Likewise.
	(rs6000_convert_register_p, rs6000_register_to_value,
	rs6000_value_to_register): Likewise.
	* s390-tdep.c (s390_register_type): Likewise.
	* sh64-tdep.c (sh64_register_type): Likewise.
	(sh64_build_float_register_type, sh64_do_fp_register): Likewise.
	* sh-tdep.c (sh_sh2a_register_type, sh_sh3e_register_type,
	sh_sh4_build_float_register_type, sh_sh4_register_type,
	sh_default_register_type): Likewise.
	* sparc64-tdep.c (sparc64_register_type): Likewise.
	* sparc-tdep.c (sparc32_register_type): Likewise.
	* spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
	* v850-tdep.c (v850_register_type): Likewise.
	* vax-tdep.c (vax_register_type): Likewise.
	* xtensa-tdep.c (xtensa_register_type, xtensa_unwind_pc,
	xtensa_push_dummy_call): Likewise.

	* std-regs.c (value_of_builtin_frame_fp_reg,
	value_of_builtin_frame_pc_reg): Likewise.
	* target-descriptions.c (tdesc_register_type): Likewise.
 2008-09-11 14:23:15 +00:00
Ulrich Weigand
bb48619059 * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Use 
regcache architecture instead of current_gdbarch.
 2008-09-05 11:46:12 +00:00
Ulrich Weigand
9dae60cc03 * m68hc11-tdep.c (gdb_print_insn_m68hc11): Use info->arch 
instead of current_gdbarch.

	* sh64-tdep.c (gdb_print_insn_sh64): Remove.
	(sh64_gdbarch_init): Install print_insn_sh64 directly.
	* sh-tdep.c (gdb_print_insn_sh): Remove.
	(sh_gdbarch_init): Install print_insn_sh directly.

	* mips-tdep.c (gdb_print_insn_mips): Do not check mips_abi
	from current_gdbarch.
	(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): New functions.
	(mips_gdbarch_init): Install them instead of gdb_print_insn_mips
	depending on mips_abi.
 2008-09-05 11:43:10 +00:00
Ulrich Weigand
24568a2cd9 * gdbarch.sh (addr_bits_remove): Change type to 'm'. 
(smash_text_address): Likewise.
	* gdbarch.c, gdbarch.h: Regenerate.

	* arch-utils.c (core_addr_identity): Add gdbarch parameter.
	* arch-utils.h (core_addr_identity): Likewise.
	* arm-tdep.c (arm_addr_bits_remove): Likewise.
	(arm_smash_text_address): Likewise.
	* hppa-tdep.c (hppa_smash_text_address): Likewise.
	* m88k-tdep.c (m88k_addr_bits_remove): Likewise.
	* s390-tdep.c (s390_addr_bits_remove): Likewise.

	* mips-tdep.c (mips_addr_bits_remove): Add gdbarch parameter.
	Use it instead of current_gdbarch.

	* arm-tdep.c (arm_prologue_prev_register, arm_unwind_pc,
	arm_dwarf2_prev_register): Update calls.
	* m88k-tdep.c (m88k_unwind_pc): Update call.
 2008-09-05 11:42:32 +00:00
Ulrich Weigand
1cf3db46a6 * gdbarch.sh (target_gdbarch): New global variable. 
(deprecated_current_gdbarch_select_hack): Set it.
	* gdbarch.c, gdbarch.h: Regenerate.

	* arch-utils.c (gdbarch_update_p): Use target_gdbarch instead
	of current_gdbarch.
	* target-descriptions.c (target_find_description): Likewise.
	* arm-tdep.c (arm_update_current_architecture): Likewise.
	(show_fp_model, arm_show_abi, arm_show_fallback_mode,
	arm_show_force_mode): Likewise.
	* mips-tdep.c (show_mask_address, show_mipsfpu_command,
	show_mips_abi): Likewise.
	* mep-tdep.c (me_module_register_set, current_me_module): Likewise.

	* target.c (target_translate_tls_address): Use target_gdbarch
	instead of current_gdbarch.
	* remote.c (struct packet_reg): Likewise.
	(get_remote_arch_state, packet_reg_from_regnum,
	packet_reg_from_pnum, remote_check_symbols, remote_wait,
	remote_address_masked, remote_insert_breakpoint,
	remote_insert_hw_breakpoint, remote_read_description): Likewise.
	* remote-m32r-sdi.c (m32r_resume, m32r_wait): Likewise.
	* remote-mips.c (mips_open, mips_common_breakpoint): Likewise.
	* cris-tdep.c (cris_can_use_hardware_watchpoint): Likewise.

	* solib.c (solib_open, solib_map_sections, solib_read_symbols,
	solib_add, info_sharedlibrary_command, solib_address,
	solib_create_inferior_hook, in_solib_dynsym_resolve_code,
	solib_global_lookup): Likewise.
	* solib-frv.c (enable_break2, frv_relocate_main_executable): Likewise.
	* solib-irix.c (irix_current_sos, irix_open_symbol_file_object):
	Likewise.
	* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
	* solib-svr4.c (exec_entry_point, enable_break, svr4_free_so,
	set_solib_svr4_fetch_link_map_offsets, svr4_fetch_link_map_offsets):
	Likewise.
	* nto-tdep.c (nto_find_and_open_solib, nto_init_solib_absolute_prefix,
	nto_truncate_ptr): Likewise.
	* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Likewise.
 2008-08-26 17:21:29 +00:00
Daniel Jacobowitz
e38d4e1aae * mips-linux-tdep.c (mips_linux_syscall_next_pc): New function. 
(mips_linux_init_abi): Set tdep->syscall_next_pc.
	* mips-tdep.c (enum mips_fpu_type, struct gdbarch_tdep): Move to
	mips-tdep.h.
	(mips32_next_pc): Handle the syscall instruction.
	* mips-tdep.h (enum mips_fpu_type, struct gdbarch_tdep): New,
	from mips-tdep.c.  Add syscall_next_pc to gdbarch_tdep.
 2008-07-27 20:52:42 +00:00
Joseph Myers
5b68030fbd * mips-tdep.c (mips_n32n64_push_dummy_call): Handle passing 
128-bit long doubles in even-odd pairs of FPRs.  Do not
	right-align float arguments for big-endian.
	(mips_n32n64_return_value): Apply return value convention for
	structs containing one or two floating-point values to soft-float
	as well as hard-float.  Handle 128-bit long doubles in such
	structs.
	(mips_o32_push_dummy_call): Only skip one integer register for a
	float argument passed in an FPR.
 2008-07-26 01:19:34 +00:00
Markus Deuling
74ed0bb414 * mips-tdep.c (fp_register_arg_p): Add gdbarch as paramter. 
(mips_n32n64_push_dummy_call, mips_o64_return_value)
	(mips_eabi_push_dummy_call): Update call to fp_register_arg_p.

	(MIPS_FPU_TYPE): Add gdbarch as parameter and replace current_gdbarch.
	(fp_register_arg_p, mips_dump_tdep, show_mipsfpu_command)
	(mips_n32n64_fp_arg_chunk_p): Update caller.

	(mips_n32n64_fp_arg_chunk_p): Add gdbarch as paramter.
	(mips_n32n64_push_dummy_call): Update caller.

	(MIPS_LAST_ARG_REGNUM): Add gdbarch as parameter and replace
	current_gdbarch.
	(mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
	(mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update caller.


	(MIPS_LAST_FP_ARG_REGNUM): Add gdbarch as parameter and replace
	current_gdbarch.
	(mips_eabi_push_dummy_call, mips_o32_push_dummy_call)
	(mips_o64_push_dummy_call): Update caller.

	(MIPS_EABI): Add gdbarch as parameter and replace current_gdbarch.
	(fp_register_arg_p, mips_dump_tdep): Update caller.

	(set_reg_offset): Add gdbarch as parameter and replace current_gdbarch.
	(mips16_scan_prologue, mips32_scan_prologue): Update caller.

	(reset_saved_regs): Make static.  Add gdbarch as parameter.  Replace
	current_gdbarch.
	(mips32_scan_prologue): Update caller.

	(heuristic_proc_start): Add gdbarch as parameter. Replace
	current_gdbarch.
	(mips_insn16_frame_cache, mips_insn32_frame_cache): Update caller.

	* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
	(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
	the current architecture. Update call to getregs_supplies.
	(getregs_supplies): Add gdbarch as parameter and replace
	current_gdbarch.

	* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use get_frame_arch to
	get at the current architecture. Update call to NBSD_MIPS_JB_OFFSET and
	NBSD_MIPS_JB_ELEMENT_SIZE.
	(NBSD_MIPS_JB_ELEMENT_SIZE, NBSD_MIPS_JB_OFFSET): Add gdbarch and
	replace current_gdbarch.

	* remote-mips.c (mips_map_regno): Add gdbarch as parameter and replace
	current_gdbarch.
	(mips_fetch_registers, mips_store_registers): Update call
	to mips_map_regno.
	(mips_load): Use get_regcache_arch to get at the current_architecture
	and replace current_gdbarch.
 2008-07-14 11:25:12 +00:00
Joseph Myers
609ba7801a 2008-06-03 Michael Snyder <msnyder@redhat.com> 
Joseph Myers  <joseph@codesourcery.com>

	* mips-tdep.c (mips_eabi_return_value): Replace stub that always
	returned RETURN_VALUE_STRUCT_CONVENTION with a real function.
 2008-06-03 10:53:34 +00:00
Daniel Jacobowitz
ba2b1c567f * gdbarch.sh: Delete dwarf_reg_to_regnum. 
* gdbarch.c, gdbarch.h: Regenerated.
	* amd64-tdep.c, arm-tdep.c, h8300-tdep.c, hppa-linux-tdep.c,
	hppa-tdep.c, i386-tdep.c, m32c-tdep.c, m68k-tdep.c, mips-tdep.c,
	s390-tdep.c, xtensa-tdep.c: Do not set dwarf_reg_to_regnum.

	* gdbint.texinfo (Target Conditionals): Delete entry for
	gdbarch_dwarf_reg_to_regnum.
 2008-05-16 00:27:24 +00:00
Daniel Jacobowitz
b8a22b9440 * mipsnbsd-tdep.c, mips64obsd-tdep.c, mips-linux-tdep.c: Update 
for unwinder changes.
	* mips-tdep.c: Likewise.
	(mips_stub_frame_cache): Unwind the ABI stack pointer, not the
	raw one.
 2008-04-30 21:25:16 +00:00
Corinna Vinschen
c055b1010f doc/ChangeLog: 
--------------

	* gdb.texinfo (Set SH Calling convention): New @item.
	(Show SH Calling convention): Ditto.

ChangeLog:
----------

	* NEWS: Add information on calling convention and new SH CLI options.

	* sh-tdep.c (sh_cc_gcc): New static string.
	(sh_cc_renesas): Ditto.
	(sh_cc_enum): New static string array.
	(sh_active_calling_convention): New static string pointer denoting
	active user chosen ABI.
	(sh_is_renesas_calling_convention): New function to return function
	specific ABI, or user choice if necessary.
	(sh_use_struct_convention): Rename first argument and turn around its
	meaning.  Check for renesas ABI and return accordingly.
	(sh_use_struct_convention_nofpu): New function.
	(sh_next_flt_argreg): Get function type as third parameter.  Check
	for renesas ABI and choose floating registers accordingly.
	(sh_push_dummy_call_fpu): Check for ABI and choose argument slot and
	struct return slot accordingly.
	(sh_push_dummy_call_nofpu): Ditto.
	(sh_return_value_nofpu): Call sh_use_struct_convention_nofpu from here.
	Evaluate ABI and give to sh_use_struct_convention_nofpu.
	(sh_return_value_fpu):  Evaluate ABI and give to
	sh_use_struct_convention.
	(show_sh_command): New function.
	(set_sh_command): Ditto.
	(_initialize_sh_tdep): Initialize `set/show sh calling-convention
	CLI command.

	* gdbarch.sh (return_value): Add func_type argument.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Ditto.
	* eval.c (evaluate_subexp_standard): Rename local variable value_type to
	val_type so as not to collide with value_type function.  Call
	using_struct_return with additional function type argument.
	* infcall.c (call_function_by_hand): Call using_struct_return and
	gdbarch_return_value with additional function type argument.
	* infcmd.c (print_return_value): Take addition func_type argument.
	Call gdbarch_return_value with additional function type argument.
	(finish_command_continuation): Call print_return_value with additional
	function type argument.
	(finish_command): Ditto.
	* sparc-tdep.c (sparc32_push_dummy_code): Call using_struct_return with
	additional function type argument.
	* stack.c (return_command): Call using_struct_return and
	gdbarch_return_value with additional function type argument.
	* value.c (using_struct_return): Take additional function type argument.
	* value.h (using_struct_return): Accommodate declaration.
	* alpha-tdep.c (alpha_return_value): Add func_type argument.
	* amd64-tdep.c (amd64_return_value): Ditto.
	* arm-tdep.c (arm_return_value): Ditto.
	* avr-tdep.c (avr_return_value): Ditto.
	* cris-tdep.c (cris_return_value): Ditto.
	* frv-tdep.c (frv_return_value): Ditto.
	* h8300-tdep.c (h8300_return_value): Ditto.
	(h8300h_return_value): Ditto.
	* hppa-tdep.c (hppa32_return_value): Ditto.
	(hppa64_return_value): Ditto.
	* i386-tdep.c (i386_return_value): Ditto.
	* ia64-tdep.c (ia64_return_value): Ditto.
	* iq2000-tdep.c (iq2000_return_value): Ditto.
	* m32c-tdep.c (m32c_return_value): Ditto.
	* m32r-tdep.c (m32r_return_value): Ditto.
	* m68hc11-tdep.c (m68hc11_return_value): Ditto.
	* m68k-tdep.c (m68k_return_value): Ditto.
	(m68k_svr4_return_value): Ditto.
	* m88k-tdep.c  (m88k_return_value): Ditto.
	* mep-tdep.c (mep_return_value): Ditto.
	* mips-tdep.c (mips_eabi_return_value): Ditto.
	(mips_n32n64_return_value): Ditto.
	(mips_o32_return_value): Ditto.
	(mips_o64_return_value): Ditto.
	* mn10300-tdep.c (mn10300_return_value): Ditto.
	* mt-tdep.c (mt_return_value): Ditto.
	* ppc-linux-tdep.c (ppc_linux_return_value): Ditto.
	* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Ditto.
	(ppc_sysv_abi_broken_return_value): Ditto.
	(ppc64_sysv_abi_return_value): Ditto.
	* ppc-tdep.h (ppc_sysv_abi_return_value): Ditto.
	(ppc_sysv_abi_broken_return_value): Ditto.
	(ppc64_sysv_abi_return_value): Ditto.
	* ppcnbsd-tdep.c (ppcnbsd_return_value): Ditto.
	* rs6000-tdep.c (rs6000_return_value): Ditto.
	* s390-tdep.c (s390_return_value): Ditto.
	* score-tdep.c (score_return_value): Ditto.
	* sh-tdep.c (sh_return_value_nofpu): Ditto.
	(sh_return_value_fpu): Ditto.
	* sh64-tdep.c (sh64_return_value): Ditto.
	* sparc-tdep.c (sparc32_return_value): Ditto.
	* sparc64-tdep.c (sparc64_return_value): Ditto.
	* spu-tdep.c (spu_return_value): Ditto.
	* v850-tdep.c (v850_return_value): Ditto.
	* vax-tdep.c (vax_return_value): Ditto.
	* xstormy16-tdep.c (xstormy16_return_value): Ditto.
	* xtensa-tdep.c (xtensa_return_value): Ditto.

	* gdbtypes.h (struct type): Add calling_convention member.
	* dwarf2read.c (read_subroutine_type): Add calling convention read
	from DW_AT_calling_convention attribute to function type.
 2008-04-22 11:03:42 +00:00
Kevin Buettner
7d1e6fb863 * mips-tdep.c (mips32_scan_prologue): Use the ABI register size 
to decide whether to match instruction patterns using "sw" and "sd".
 2008-03-15 00:00:48 +00:00
Daniel Jacobowitz
8defab1af7 * breakpoint.h (breakpoint_restore_shadows): New 
declaration.
	* breakpoint.c (breakpoint_restore_shadows): New.
	(read_memory_nobpt): Delete.
	* gdbcore.h (read_memory_nobpt): Delete declaration.
	* target.c (memory_xfer_partial): Call
	breakpoint_restore_shadows.
	(restore_show_memory_breakpoints)
	(make_show_memory_beakpoints_cleanup): New.
	(show_memory_breakpoints): New.
	* target.h (make_show_memory_beakpoints_cleanup): Declare.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
	Make sure we see memory breakpoints when checking if
	breakpoint is still there.
	* alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
	hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
	m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
	sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
 2008-03-13 12:22:14 +00:00
Markus Deuling
40887e1a6e * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess 
from disassemble_info instead of gdbarch_byte_order.

	* mips-tdep.c (gdb_print_insn_mips): Likewise.
	* arm-tdep.c (gdb_print_insn_arm): Likewise.
 2008-02-20 14:34:43 +00:00
Markus Deuling
6093d2eb3a * gdbarch.sh (skip_prologue): Add gdbarch 
as parameter.
	* gdbarch.{c,h}: Regenerate.

	* alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
	* amd64-tdep.c (amd64_skip_prologue): Likewise.
	* avr-tdep.c (avr_skip_prologue): Likewise.
	* cris-tdep.c (cris_skip_prologue): Likewise.
	* frv-tdep.c (frv_skip_prologue): Likewise.
	* h8300-tdep.c (h8300_skip_prologue): Likewise.
	* hppa-tdep.c (hppa_skip_prologue): Likewise.
	* i386-tdep.c (i386_skip_prologue): Likewise.
	* ia64-tdep.c (ia64_skip_prologue): Likewise.
	* iq2000-tdep.c (iq2000_skip_prologue): Likewise.
	* m32r-tdep.c (m32r_skip_prologue): Likewise.
	* m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
	* m68k-tdep.c (m68k_skip_prologue): Likewise.
	* m88k-tdep.c (m88k_skip_prologue): Likewise.
	* mep-tdep.c (mep_skip_prologue): Likewise.
	* mips-tdep.c (mips_skip_prologue): Likewise.
	* mn10300-tdep.c (mn10300_skip_prologue): Likewise.
	* mt-tdep.c (mt_skip_prologue): Likewise.
	* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
	* score-tdep.c (score_skip_prologue): Likewise.
	* sh64-tdep.c (sh64_skip_prologue): Likewise.
	* sh-tdep.c (sh_skip_prologue): Likewise.
	* sparc64-tdep.c (sparc64_skip_prologue): Likewise.
	* sparc-tdep.c (sparc32_skip_prologue): Likewise.
	* spu-tdep.c (spu_skip_prologue): Likewise.
	* v850-tdep.c (v850_skip_prologue): Likewise.
	* vax-tdep.c (vax_skip_prologue): Likewise.
	* xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
	* xtensa-tdep.c (xtensa_skip_prologue): Likewise.

	* arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
	current_gdbarch by gdbarch.
	* m32c-tdep.c (m32c_skip_prologue): Likewise.
	* s390-tdep.c (s390_skip_prologue): Likewise.
 2008-01-11 13:20:02 +00:00
Daniel Jacobowitz
9b254dd1ce Updated copyright notices for most files. 2008-01-01 22:53:26 +00:00
Maciej W. Rozycki
5863b5d536 * mips-tdep.c (mips_n32n64_push_dummy_call): Sign-extend 
integers and 32-bit pointers as required by the ABI.
 2007-12-20 17:13:57 +00:00
Maciej W. Rozycki
c68cf8ad10 * mips-tdep.c (extended_offset): Fix a comment. 2007-12-07 15:07:12 +00:00
Markus Deuling
d3f73121db * gdbarch.sh (stab_reg_to_regnum, dwarf_reg_to_regnum) 
( dwarf2_reg_to_regnum, sdb_reg_to_regnum, ecoff_reg_to_regnum): Add
	gdbarch as parameter.
	* gdbarch.{c,h}: Regenerate.

	* xtensa-tdep.c (xtensa_reg_to_regnum): Add gdbarch as parameter.
	Replace current_gdbarch by gdbarch.
	* s390-tdep.c (s390_dwarf_reg_to_regnum): Likewise.
	* rs6000-tdep.c (rs6000_stab_reg_to_regnum)
	(rs6000_dwarf2_reg_to_regnum): Likewise.
	* mips-tdep.c (mips_stab_reg_to_regnum)
	(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
	* mep-tdep.c (mep_debug_reg_to_regnum): Likewise.
	* m32c-tdep.c (m32c_debug_info_reg_to_regnum): Likewise.
	* i386-tdep.c (i386_dbx_reg_to_regnum)
	(i386_svr4_reg_to_regnum): Likewise
	* h8300-tdep.c (h8300s_dbg_reg_to_regnum)
	(h8300_dbg_reg_to_regnum): Likewise.
	* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Likewise.
	* arch-utils.c (no_op_reg_to_regnum): Likewise.
	* arch-utils.h (no_op_reg_to_regnum): Likewise.
	* arm-tdep.c (arm_dwarf_reg_to_regnum): Likewise.
	* cris-tdep.c (cris_dwarf2_reg_to_regnum): Likewise.
	* hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Likewise.
	* ia64-tdep.c (ia64_dwarf_reg_to_regnum): Likewise.
	* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
 2007-12-06 16:33:00 +00:00
Maciej W. Rozycki
2207132da4 * mips-tdep.c (mips16_scan_prologue): Handle the MIPS16e SAVE 
instruction.
 2007-11-20 13:47:42 +00:00
Markus Deuling
e7faf93859 2007-11-19 Markus Deuling <deuling@de.ibm.com> 
* gdbarch.sh (register_sim_regno): Add gdbarch as parameter.
	* gdbarch.{c,h}: Regenerate.

	* arch-utils.h (legacy_register_sim_regno): Add gdbarch as parameter.
	* score-tdep.c (score_register_sim_regno): Likewise.
	* sim-regno.h (one2one_register_sim_regno): Likewise.

	* arch-utils.c (legacy_register_sim_regno): Add gdbarch as parameter.
	Replace current_gdbarch by gdbarch.
	* sh-tdep.c (sh_sh2a_register_sim_regno)
	(sh_dsp_register_sim_regno): Likewise.
	* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
	* mips-tdep.c (mips_register_sim_regno): Likewise.
	* m32c-tdep.c (m32c_register_sim_regno): Likewise.
	* frv-tdep.c (frv_register_sim_regno): Likewise.
	* arm-tdep.c (arm_register_sim_regno): Likewise.
	* remote-sim.c (one2one_register_sim_regno): Likewise.
 2007-11-19 05:06:24 +00:00
Ulrich Weigand
6ca0852e7a * mips-tdep.c (show_mipsfpu_command): Do not crash if called when 
current architecture is not MIPS.
 2007-11-17 00:57:41 +00:00
Markus Deuling
0abe36f50d * gdbarch.sh (convert_register_p): Add gdbarch as parameter. 
* ia64-tdep.c (ia64_convert_register_p): Likewise.
	* i387-tdep.c (i387_convert_register_p): Likewise.
	* i387-tdep.h (i387_convert_register_p): Likewise.
	* alpha-tdep.c (alpha_convert_register_p): Likewise.
	* gdbarch.{c,h}: Regenerate.

	* rs6000-tdep.c (rs6000_convert_register_p): Add gdbarch as parameter.
	Replace current_gdbarch by gdbarch.
	* mips-tdep.c (mips_convert_register_p): Likewise.
	* m68k-tdep.c (m68k_convert_register_p): Likewise.
	* i386-tdep.c (i386_convert_register_p): Likewise.
 2007-11-09 05:32:19 +00:00
Joseph Myers
b14d30e141 include: 
2007-11-07  Joseph Myers  <joseph@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>

	* floatformat.h (struct floatformat): Add split_half field.
	(floatformat_ibm_long_double): New.

libiberty:
2007-11-07  Joseph Myers  <joseph@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>

	* floatformat.c (mant_bits_set): New.
	(floatformat_to_double): Use it.  Note no special handling of
	split formats.
	(floatformat_from_double): Note no special handing of split
	formats.
	(floatformat_ibm_long_double_is_valid,
	floatformat_ibm_long_double): New.
	(floatformat_ieee_single_big, floatformat_ieee_single_little,
	floatformat_ieee_double_big, floatformat_ieee_double_little,
	floatformat_ieee_double_littlebyte_bigword, floatformat_vax_f,
	floatformat_vax_d, floatformat_vax_g, floatformat_i387_ext,
	floatformat_m68881_ext, floatformat_i960_ext,
	floatformat_m88110_ext, floatformat_m88110_harris_ext,
	floatformat_arm_ext_big, floatformat_arm_ext_littlebyte_bigword,
	floatformat_ia64_spill_big, floatformat_ia64_spill_little,
	floatformat_ia64_quad_big, floatformat_ia64_quad_little): Update
	for addition of split_half field.

gdb:
2007-11-07  Joseph Myers  <joseph@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>

	* gdbtypes.c (floatformats_ibm_long_double): New.
	* gdbtypes.h (floatformats_ibm_long_double): Declare.
	* ia64-tdep.c (floatformat_ia64_ext): Update for addition of
	split_half field.
	* mips-tdep.c (n32n64_floatformat_always_valid,
	floatformat_n32n64_long_double_big, floatformats_n32n64_long):
	Remove.
	(mips_gdbarch_init): Use floatformats_ibm_long_double instead of
	floatformats_n32n64_long.
	* ppc-linux-tdep.c (ppc_linux_init_abi): Use 128-bit IBM long
	double.
	* doublest.c (convert_floatformat_to_doublest,
	convert_doublest_to_floatformat): Handle split floating-point
	formats.
	* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Handle IBM long
	double arguments.
	(ppc64_sysv_abi_push_dummy_call): Likewise.
	(do_ppc_sysv_return_value): Handle IBM long double return.
 2007-11-08 00:08:48 +00:00
Markus Deuling
a54fba4c5d 2007-11-07 Markus Deuling <deuling@de.ibm.com> 
* gdbarch.sh (legacy_virtual_frame_pointer): Add gdbarch parameter.
	* gdbarch.{c,h}: Regenerate.
	* arch-utils.c (legacy_virtual_frame_pointer): Add gdbarch parameter.
	Replace current_gdbarch by gdbarch.
	* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
	* mips-tdep.c (mips_virtual_frame_pointer): Likewise.
	* spu-tdep.c (spu_virtual_frame_pointer): Likewise.
 2007-11-07 06:58:31 +00:00
Markus Deuling
67d5789459 *** empty log message *** 2007-11-07 06:33:01 +00:00
Ulrich Weigand
d93859e2e8 2007-11-02 Markus Deuling <deuling@de.ibm.com> 
* gdbarch.sh (register_name): Add gdbarch parameter.
	* gdbarch.{c,h}: Regenerate.

	* target-descriptions.c (tdesc_register_name): Add gdbarch parameter.
	(tdesc_register_name): Replace current_gdbarch by gdbarch.
	* target-descriptions.h (tdesc_register_name): Add gdbarch parameter.

	* xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter.
	* vax-tdep.c (vax_register_name): Add gdbarch parameter.
	* spu-tdep.c (spu_register_name): Add gdbarch parameter.
	* s390-tdep.c (s390_register_name): Add gdbarch parameter.
	* mt-tdep.c (mt_register_name): Add gdbarch parameter.
	(mt_registers_info): Replace current_gdbarch by gdbarch.
	(mt_register_reggroup_p): Add gdbarch to mt_register_name call.
	* mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	(mips_register_name): Add gdbarch to tdesc_register_name call.
	* mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	(mep_register_reggroup_p): Add gdbarch to mep_register_name call.
	* m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	* m88k-tdep.c (m88k_register_name): Add gdbarch parameter.
	* m68k-tdep.c (m68k_register_name): Add gdbarch parameter.
	* m32r-tdep.c (m32r_register_name): Add gdbarch parameter.
	(m32r_frame_unwind_cache): Use get_frame_arch to get at the current
	architecture by frame_info.
	* iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter.
	* ia64-tdep.c (ia64_register_name): Add gdbarch parameter.
	* hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch
	parameter.
	* h8300-tdep.c (h8300_register_name, h8300s_register_name)
	(h8300sx_register_name): Add gdbarch parameter.
	* cris-tdep.c (cris_register_name, crisv32_register_name): Add
	gdbarch parameter. Replace current_gdbarch by gdbarch.
	(cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment).
	* avr-tdep.c (avr_register_name): Add gdbarch parameter.
	* arm-tdep.c (arm_register_name): Add gdbarch paramete
	* amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update
	caller.
	* amd64-tdep.h (amd64_register_name): Add gdbarch parameter.
	* amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter.
	* alpha-tdep.c (alpha_register_name): Add gdbarch parameter.
	(alpha_cannot_fetch_register, alpha_cannot_store_register): Update call
	of alpha_register_name.
	* frv-tdep.c (frv_register_name): Add gdbarch parameter.
	* i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	(i386_register_type): Replace ?current_gdbarch by gdbarch.
	* i386-tdep.h (i386_register_name): Add gdbarch parameter.
	* i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter.

	* m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter.
	(m68hc11_register_reggroup_p): Add gdbarch to call of
	m68hc11_register_name.
	* mn10300-tdep.c (mn10300_generic_register_name, am33_register_name)
	(am33_2_register_name): Add gdbarch parameter.
	(mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
	architecture by frame_info.
	(mn10300_dump_tdep): Replace current_gdbarch by gdbarch.
	* rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	* score-tdep.c (score_register_name): Add gdbarch parameter.
	(score_return_value, score_push_dummy_call): Replace current_gdbarch
	by gdbarch.
	* sh64-tdep.c (sh64_register_name): Add gdbarch parameter.
	(sh64_compact_reg_base_num, sh64_register_convert_to_virtual)
	(sh64_register_convert_to_raw, sh64_fv_reg_base_num)
	(sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter
	and update caller. Replace current_gdbarch by gdbarch.
	(sh64_extract_return_value, sh64_store_return_value): Use
	get_regcache_arch to get at the current architecture by regcache.
	* sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
	(sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name)
	(sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name)
	(sh_sh3_dsp_register_name, sh_sh4_register_name)
	(sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch
	parameter.
	(fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg)
	(sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace
	current_gdbarch by gdbarch.
	(sh_extract_return_value_fpu, sh_store_return_value_fpu): Use
	get_regcache_arch to get at the current architecture by regcache.
	* sparc-tdep.c (sparc32_register_name): Add gdbarch parameter.
	* sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter.
	* v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch
	parameter.
	(v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch.
	* xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace
	current_gdbarch by gdbarch.
	(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
	(xtensa_frame_prev_register): Add gdbarch parameter to
	xtensa_register_name call.
 2007-11-02 14:27:15 +00:00
Daniel Jacobowitz
3d5f6d122e 2007-10-23 Atsushi Nemoto <anemo@mba.ocn.ne.jp> 
* mips-tdep.c (LL_OPCODE, LLD_OPCODE, SC_OPCODE, SCD_OPCODE): Define.
	(deal_with_atomic_sequence): New.
	(mips_software_single_step): Use it.
 2007-10-23 13:11:47 +00:00
Daniel Jacobowitz
ba32f9896b * mips-tdep.c (mips_xfer_register): Take a gdbarch argument. 
(mips_n32n64_return_value, mips_o32_return_value)
	(mips_o64_return_value): Update calls to mips_xfer_register.
 2007-10-18 15:25:41 +00:00
Daniel Jacobowitz
7cc46491b1 * NEWS: Document target described register support for PowerPC. 
* ppc-tdep.h: Remove ppc_spr constants.
	(struct gdbarch_tdep): Remove regs, ppc_sr0_regnum, and
	ppc_builtin_type_vec128 members.
	(PPC_R0_REGNUM, PPC_F0_REGNUM, PPC_PC_REGNUM, PPC_MSR_REGNUM)
	(PPC_CR_REGNUM, PPC_LR_REGNUM, PPC_CTR_REGNUM, PPC_XER_REGNUM)
	(PPC_FPSCR_REGNUM, PPC_MQ_REGNUM, PPC_SPE_UPPER_GP0_REGNUM)
	(PPC_SPE_ACC_REGNUM, PPC_SPE_FSCR_REGNUM, PPC_VR0_REGNUM)
	(PPC_VSCR_REGNUM, PPC_VRSAVE_REGNUM, PPC_NUM_REGS): New constants.
	* rs6000-tdep.c: Include preparsed descriptions.
	(init_sim_regno_table): Do not iterate over pseudo registers.
	Look up segment registers by name.  Use sim_spr_register_name
	for SPRs.
	(rs6000_register_sim_regno): Call init_sim_regno_table here.
	(rs6000_builtin_type_vec128): Delete.
	(rs6000_register_name): Only handle SPE pseudo registers and upper
	halves.  Call tdesc_register_name for everything else.
	(rs6000_register_type): Delete.  Replace with...
	(rs6000_pseudo_register_type): ...this new function.  Only handle
	SPE pseudo registers.
	(rs6000_register_reggroup_p): Delete.  Replace with...
	(rs6000_pseudo_register_reggroup_p): ...this new function.  Only
	handle SPE pseudo registers.
	(rs6000_convert_register_p): Use ppc_fp0_regnum instead of
	"struct reg".
	(rs6000_register_to_value, rs6000_value_to_register): Remove check
	of reg->fpr.
	(e500_register_reggroup_p): Delete.
	(STR, R, R4, R8, R16, F, P8, R32, R64, R0, A4, S, S4, SN4, S64)
	(COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS)
	(PPC_SEGMENT_REGS, PPC_OEA_SPRS, PPC_ALTIVEC_REGS, PPC_SPE_GP_REGS)
	(PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): Delete macros.
	(registers_powerpc, registers_403, registers_403GC, registers_505)
	(registers_860, registers_601, registers_602, registers_603)
	(registers_604, registers_750, registers_7400, registers_e500): Delete
	variables.
	(struct variant): Delete nregs, npregs, num_tot_regs, and regs.  Add
	tdesc.
	(tot_num_registers, num_registers, num_pseudo_registers): Delete.
	(variants): Delete outdated comment.  Use standard target descriptions
	instead of "struct reg" arrays.
	(init_variants): Delete.
	(rs6000_gdbarch_init): Do not guess word size from the BFD
	architecture if we have a target description.  Select a variant
	before creating a new architecture.  Use the variant's target
	description if the target did not define a register layout.
	Validate target-supplied registers.  Reject mismatches.  Use
	fixed register numbers and new constants instead of magic
	numbers.  Call set_gdbarch_ps_regnum.  Call tdesc_use_registers.
	(_initialize_rs6000_tdep): Initialize the preparsed target
	descriptions.
	* target-descriptions.c (tdesc_predefined_types): Add int128 and
	uint128.
	(tdesc_find_register_early): New function.
	(tdesc_numbered_register): Use it.
	(tdesc_register_size): New function.
	(tdesc_use_registers): Take a target_desc argument.  Do not use
	gdbarch_target_desc.
	* target-descriptions.h (tdesc_use_registers): Update prototype
	and comment.
	(tdesc_register_size): New prototype.
	* Makefile.in (powerpc_32_c, powerpc_403_c, powerpc_403gc_c)
	(powerpc_505_c, powerpc_601_c, powerpc_602_c, powerpc_603_c)
	(powerpc_604_c, powerpc_64_c, powerpc_7400_c, powerpc_750_c)
	(powerpc_860_c, powerpc_e500_c, rs6000_c): New macros.
	(rs6000-tdep.o): Update.
	* arm-tdep.c (arm_gdbarch_init): Update call to tdesc_use_registers.
	* m68k-tdep.c (m68k_gdbarch_init): Likewise.
	* mips-tdep.c (mips_gdbarch_init): Likewise.

	* gdb.texinfo (Predefined Target Types): Add int128
	and uint128.
	(Standard Target Features): Add PowerPC features.

	* gdb.xml/tdesc-regs.exp: Add PowerPC support.

	* sim-ppc.h (sim_spr_register_name): New prototype.

	* gdb-sim.c (regnum2spr): Rename to...
	(sim_spr_register_name): ... this.  Make global.
 2007-10-15 19:45:31 +00:00
Ulrich Weigand
72a155b44d 2007-10-10 Markus Deuling <deuling@de.ibm.com> 
* mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
	current architecture by regcache.
	(mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
	(mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
	(mips_stub_frame_cache, mips_read_fp_register_single)
	(mips_read_fp_register_double, mips_print_fp_register)
	(mips_print_register, print_gp_register_row): Use get_frame_arch to get
	at the current architecture by frame_info.
	(mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
	(mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
	(mips_unwind_dummy_id, mips_eabi_push_dummy_call)
	(mips_n32n64_push_dummy_call, mips_n32n64_return_value)
	(mips_o32_push_dummy_call, mips_o32_return_value)
	(mips_o64_push_dummy_call, mips_o64_return_value)
	(mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
	gdbarch.
 2007-10-10 17:03:36 +00:00
Maciej W. Rozycki
313628ccba * mips-tdep.c (mips32_next_pc): Fix a typo in BGTZL. 2007-10-08 13:15:00 +00:00
Daniel Jacobowitz
82e9138962 * mips-tdep.c (mips_read_fp_register_double): Correct check for 
odd FP registers.
	(mips_print_fp_register): Correct check for even FP registers.
	(mips_virtual_frame_pointer): New function.
	(mips_gdbarch_init): Call set_gdbarch_virtual_frame_pointer.
 2007-10-02 15:17:44 +00:00
Maciej W. Rozycki
59aa1faa75 * mips-tdep.c (mips_n32n64_return_value): Fix a comment. 2007-09-26 11:36:30 +00:00
Maciej W. Rozycki
b18bb924a2 * mips-tdep.c (mips_n32n64_return_value): Per N32/N64 ABI 
rules return composite types in registers as appropriate.
 2007-09-25 16:08:17 +00:00
Maciej W. Rozycki
ab2e1992cf * mips-tdep.c (mips_n32n64_push_dummy_call): Per N32/N64 ABI 
rules do not treat composite types specially.
 2007-09-21 15:54:58 +00:00
Maciej W. Rozycki
97ab0fdd9d * mips-tdep.c (mips32_in_function_epilogue_p): New function. 
(mips16_in_function_epilogue_p): Likewise.
(mips_in_function_epilogue_p): Likewise.
(mips_gdbarch_init): Register mips_in_function_epilogue_p().
 2007-09-20 15:34:19 +00:00
Daniel Jacobowitz
aa6c981f95 * mips-tdep.c (mips_stub_frame_cache): Correct the saved return 
address register.  Correct the call to frame_id_build.
	(mips_stub_frame_sniffer): Use the stub unwinder when the PC
	is invalid.
 2007-09-19 14:45:39 +00:00
Daniel Jacobowitz
4eb0ad19f3 * arch-utils.c (gdbarch_info_fill): Also try core_bfd. 
* corelow.c (core_read_description): New.
	(init_core_ops): Set to_read_description.
	* gdbarch.sh: Add gdbarch_core_read_description.
	* mips-linux-tdep.c (mips_linux_core_read_description): New.
	(mips_linux_init_abi): Call set_gdbarch_core_read_description.
	* mips-tdep.c (mips_tdesc_gp32, mips_tdesc_gp64): New.
	(mips_register_g_packet_guesses): Use them.
	(_initialize_mips_tdep): Initialize them.
	* mips-tdep.h (mips_tdesc_gp32, mips_tdesc_gp64): Declare.
	* gdbarch.h, gdbarch.c: Regenerated.
 2007-09-10 21:14:11 +00:00
Joel Brobecker
a9762ec78a Switch the license of all .c files to GPLv3. 
Switch the license of all .h files to GPLv3.
        Switch the license of all .cc files to GPLv3.
 2007-08-23 18:08:50 +00:00