174 Commits

Author	SHA1	Message	Date
Pedro Alves	663f6d42f4	Add $_gthread convenience variable ... This commit adds a new $_gthread convenience variable, that is like $_thread, but holds the current thread's global thread id. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * NEWS: Mention $_gthread. * gdbthread.h (struct thread_info) <global_num>: Mention $_gthread. * thread.c (thread_num_make_value_helper): New function. (thread_id_make_value): Delete. (thread_id_per_inf_num_make_value, global_thread_id_make_value): New. (thread_funcs): Adjust. (gthread_funcs): New. (_initialize_thread): Register $_gthread variable. gdb/testsuite/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * gdb.base/default.exp: Expect $_gthread as well. * gdb.multi/tids.exp: Test $_gthread. * gdb.threads/thread-specific.exp: Test $_gthread. gdb/doc/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Document the $_gthread convenience variable. (Convenience Vars): Likewise.	2016-01-13 11:03:19 +00:00
Pedro Alves	c84f6bbfe5	Implement "info threads -gid" ... This commit makes global thread IDs optionaly visible in "info threads", with the new "-gid" switch: (gdb) info threads -gid Id GId Target Id Frame 1.1 1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running) 1.2 3 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running) 1.3 4 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running) 2.1 2 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running) 2.2 5 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running) * 2.3 6 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running) (gdb) info threads Id Target Id Frame 1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running) 1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running) 1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running) 2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running) 2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running) * 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running) No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * NEWS: Mention "info threads -gid". * gdbthread.h (struct thread_info) <global_num>: Mention "info threads -gid". * thread.c (info_threads_command): Handle "-gid". (_initialize_thread): Adjust "info threads" help string to mention -gid. gdb/testsuite/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * gdb.multi/tids.exp: Test "info threads -gid". gdb/doc/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Document "info threads -gid".	2016-01-13 11:02:05 +00:00
Pedro Alves	5d5658a1d3	Per-inferior/Inferior-qualified thread IDs ... This commit changes GDB to track thread numbers per-inferior. Then, if you're debugging multiple inferiors, GDB displays "inferior-num.thread-num" instead of just "thread-num" whenever it needs to display a thread: (gdb) info inferiors Num Description Executable 1 process 6022 /home/pedro/gdb/tests/threads * 2 process 6037 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame 1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running) 1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running) 1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running) 2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running) 2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running) * 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running) (gdb) ... (gdb) thread 1.1 [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))] (gdb) ... etc. You can still use "thread NUM", in which case GDB infers you're referring to thread NUM of the current inferior. The $_thread convenience var and Python's InferiorThread.num attribute are remapped to the new per-inferior thread number. It's a backward compatibility break, but since it only matters when debugging multiple inferiors, I think it's worth doing. Because MI thread IDs need to be a single integer, we keep giving threads a global identifier, _in addition_ to the per-inferior number, and make MI always refer to the global thread IDs. IOW, nothing changes from a MI frontend's perspective. Similarly, since Python's Breakpoint.thread and Guile's breakpoint-thread/set-breakpoint-thread breakpoint methods need to work with integers, those are adjusted to work with global thread IDs too. Follow up patches will provide convenient means to access threads' global IDs. To avoid potencially confusing users (which also avoids updating much of the testsuite), if there's only one inferior and its ID is "1", IOW, the user hasn't done anything multi-process/inferior related, then the "INF." part of thread IDs is not shown. E.g,.: (gdb) info inferiors Num Description Executable * 1 process 15275 /home/pedro/gdb/tests/threads (gdb) info threads Id Target Id Frame * 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) add-inferior Added inferior 2 (gdb) info threads Id Target Id Frame * 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40 (gdb) No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * NEWS: Mention that thread IDs are now per inferior and global thread IDs. * Makefile.in (SFILES): Add tid-parse.c. (COMMON_OBS): Add tid-parse.o. (HFILES_NO_SRCDIR): Add tid-parse.h. * ada-tasks.c: Adjust to use ptid_to_global_thread_id. * breakpoint.c (insert_breakpoint_locations) (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions) (print_one_breakpoint_location, set_longjmp_breakpoint) (check_longjmp_breakpoint_for_call_dummy) (set_momentary_breakpoint): Adjust to use global IDs. (find_condition_and_thread, watch_command_1): Use parse_thread_id. (until_break_command, longjmp_bkpt_dtor) (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust to use global IDs. * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use ptid_to_global_thread_id. * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. * gdbthread.h (struct thread_info): Rename field 'num' to 'global_num. Add new fields 'per_inf_num' and 'inf'. (thread_id_to_pid): Rename thread_id_to_pid to global_thread_id_to_ptid. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (find_thread_id): Rename to ... (find_thread_global_id): ... this. (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare. (print_thread_info): Add comment. * tid-parse.h: New file. * tid-parse.c: New file. * infcmd.c (step_command_fsm_prepare) (step_command_fsm_should_stop): Adjust to use the global thread ID. (until_next_command, until_next_command) (finish_command_fsm_should_stop): Adjust to use the global thread ID. (attach_post_wait): Adjust to check the inferior number too. * inferior.h (struct inferior) <highest_thread_num>: New field. * infrun.c (handle_signal_stop) (insert_exception_resume_breakpoint) (insert_exception_resume_from_probe): Adjust to use the global thread ID. * record-btrace.c (record_btrace_open): Use global thread IDs. * remote.c (process_initial_stop_replies): Also consider the inferior number. * target.c (target_pre_inferior): Clear the inferior's highest thread num. * thread.c (clear_thread_inferior_resources): Adjust to use the global thread ID. (new_thread): New inferior parameter. Adjust to use it. Set both the thread's global ID and the thread's per-inferior ID. (add_thread_silent): Adjust. (find_thread_global_id): New. (find_thread_id): Make static. Adjust to rename. (valid_thread_id): Rename to ... (valid_global_thread_id): ... this. (pid_to_thread_id): Rename to ... (ptid_to_global_thread_id): ... this. (thread_id_to_pid): Rename to ... (global_thread_id_to_ptid): ... this. Adjust. (first_thread_of_process): Adjust. (do_captured_list_thread_ids): Adjust to use global thread IDs. (should_print_thread): New function. (print_thread_info): Rename to ... (print_thread_info_1): ... this, and add new show_global_ids parameter. Handle it. Iterate over inferiors. (print_thread_info): Reimplement as wrapper around print_thread_info_1. (show_inferior_qualified_tids): New function. (print_thread_id): Use it. (tp_array_compar): Compare inferior numbers too. (thread_apply_command): Use tid_range_parser. (do_captured_thread_select): Use parse_thread_id. (thread_id_make_value): Adjust. (_initialize_thread): Adjust "info threads" help string. * varobj.c (struct varobj_root): Update comment. (varobj_create): Adjust to use global thread IDs. (value_of_root_1): Adjust to use global_thread_id_to_ptid. * windows-tdep.c (display_tib): No longer accept an argument. * cli/cli-utils.c (get_number_trailer): Make extern. * cli/cli-utils.h (get_number_trailer): Declare. (get_number_const): Adjust documentation. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global thread IDs. * mi/mi-interp.c (mi_new_thread, mi_thread_exit) (mi_on_normal_stop, mi_output_running_pid, mi_on_resume): * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise. * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x): Likewise. * python/py-breakpoint.c (bppy_set_thread): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. * python/py-infthread.c (thpy_get_num): Add comment and return the per-inferior thread ID. (thread_object_getset): Update comment of "num". gdb/testsuite/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.base/break.exp: Adjust to output changes. * gdb.base/hbreak2.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/watch_thread_num.exp: Likewise. * gdb.linespec/keywords.exp: Likewise. * gdb.multi/info-threads.exp: Likewise. * gdb.threads/thread-find.exp: Likewise. * gdb.multi/tids.c: New file. * gdb.multi/tids.exp: New file. gdb/doc/ChangeLog: 2016-01-07 Pedro Alves <palves@redhat.com> * gdb.texinfo (Threads): Document per-inferior thread IDs, qualified thread IDs, global thread IDs and thread ID lists. (Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to thread IDs. (Convenience Vars): Document the $_thread convenience variable. (Ada Tasks): Adjust to refer to thread IDs. (GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking Commands, GDB/MI Variable Objects): Update to mention global thread IDs. * guile.texi (Breakpoints In Guile) <breakpoint-thread/set-breakpoint-thread breakpoint>: Mention global thread IDs instead of thread IDs. * python.texi (Threads In Python): Adjust documentation of InferiorThread.num. (Breakpoint.thread): Mention global thread IDs instead of thread IDs.	2016-01-13 10:59:43 +00:00
Pedro Alves	43792cf0de	Centralize thread ID printing ... Add a new function to print a thread ID, in the style of paddress, plongest, etc. and adjust all CLI-reachable paths to use it. This gives us a single place to tweak to print inferior-qualified thread IDs later: - [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))] + [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))] etc., though for now, this has no user-visible change. No regressions on x86_64 Fedora 20. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> * breakpoint.c (remove_threaded_breakpoints) (print_one_breakpoint_location): Use print_thread_id. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Use print_thread_id. * common/print-utils.c (CELLSIZE): Delete. (get_cell): Rename to ... (get_print_cell): ... this and made extern. Adjust call callers. Adjust to use PRINT_CELL_SIZE. * common/print-utils.h (get_print_cell): Declare. (PRINT_CELL_SIZE): New. * gdbthread.h (print_thread_id): Declare. * infcmd.c (signal_command): Use print_thread_id. * inferior.c (print_inferior): Use print_thread_id. * infrun.c (handle_signal_stop) (insert_exception_resume_breakpoint) (insert_exception_resume_from_probe) (print_signal_received_reason): Use print_thread_id. * record-btrace.c (record_btrace_info) (record_btrace_resume_thread, record_btrace_cancel_resume) (record_btrace_step_thread, record_btrace_wait): Use print_thread_id. * thread.c (thread_apply_all_command): Use print_thread_id. (print_thread_id): New function. (thread_apply_command): Use print_thread_id. (thread_command, thread_find_command, do_captured_thread_select): Use print_thread_id.	2016-01-13 10:59:14 +00:00
Pedro Alves	a911d87ad7	Fix PR19388: Can't access $_siginfo in breakpoint (catch signal) condition ... This commit merges both the registers and $_siginfo "thread running/executing" checks into a single function. Accessing $_siginfo from a "catch signal" breakpoint condition doesn't work. The condition always fails with "Selected thread is running": (gdb) catch signal Catchpoint 3 (standard signals) (gdb) condition $bpnum $_siginfo.si_signo == 5 (gdb) continue Continuing. Error in testing breakpoint condition: Selected thread is running. Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig); (gdb) When accessing the $_siginfo object, we check whether the thread is marked running (external/public) state and refuse the access if so. This is so "print $_siginfo" at the prompt fails nicelly when the current thread is running. While evaluating breakpoint conditionals, we haven't decided yet whether the thread is going to stop, so is_running still returns true, and we thus always error out. Evaluating an expression that requires registers access is really conceptually the same -- we could think of $_siginfo as a pseudo register. However, in that case we check whether the thread is marked executing (internal/private state), not running (external/public state). Changing the $_siginfo validation to check is_executing as well fixes the bug in question. Note that checking is_executing is not fully correct, not even for registers. See PR 19389. However, I think this is the lesser of two evils and ends up as an improvement. We at least now have a single place to fix. Tested on x86_64 GNU/Linux. gdb/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> PR breakpoints/19388 * frame.c (get_current_frame): Use validate_registers_access. * gdbthread.h (validate_registers_access): Declare. * infrun.c (validate_siginfo_access): Delete. (siginfo_value_read, siginfo_value_write): Use validate_registers_access. * thread.c (validate_registers_access): New function. gdb/testsuite/ChangeLog: 2016-01-13 Pedro Alves <palves@redhat.com> PR breakpoints/19388 * gdb.base/catch-signal-siginfo-cond.c: New file. * gdb.base/catch-signal-siginfo-cond.exp: New file.	2016-01-13 10:40:33 +00:00
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2016-01-01 08:43:22 +04:00
Pedro Alves	6efcd9a8b3	Remote all-stop-on-top-of-non-stop ... This is the first pass at implementing support for all-stop mode running against the remote target using the non-stop variant of the protocol. The trickiest part here is the initial connection setup/synching. We need to fetch all inferiors' target descriptions etc. before stopping threads, because stop_all_threads needs to read the threads' registers (to record each thread's stop_pc). But OTOH, the initial inferior setup (target_post_attach, post_create_inferior, etc.), only works correctly if the inferior is stopped... So I've split that initial setup part from attach_command_post_wait to a separate function, and added a "still needs setup" flag to the inferior structure. This is similar to gdbserver/linux-low.c's handling of discovering the process's target description). Then if on connection all threads of the remote inferior are running, when we go about stopping them, as soon as they stop we call setup_inferior, from within stop_all_threads. Also, in all-stop, we need to process all the initial stop replies to learn about all the pending signal the threads may already be stopped for, and pick the one to report as current. This is exposed by gdb.threads/reconnect-signal.exp. gdb/ 2015-11-30 Pedro Alves <palves@redhat.com> * gdbthread.h (switch_to_thread_no_regs): Declare. * infcmd.c (setup_inferior): New function, factored out from ... (attach_command_post_wait): ... this. Rename to ... (attach_post_wait): ... this. Replace parameter async_exec with attach_post_wait_mode parameter. Adjust. (enum attach_post_wait_mode): New enum. (struct attach_command_continuation_args): Replace 'async_exec' field with 'mode' field. (attach_command_continuation): Adjust. (attach_command): Add comment. Mark the inferior as needing setup. Adjust to use enum attach_post_wait_mode. (notice_new_inferior): Use switch_to_thread_no_regs. Adjust to use enum attach_post_wait_mode. * inferior.h (setup_inferior): Declare. (struct inferior) <needs_setup>: New field. * infrun.c (set_last_target_status): Make extern. (stop_all_threads): Make extern. Setup inferior, if necessary. * infrun.h (set_last_target_status, stop_all_threads): Declare. * remote-notif.c (remote_async_get_pending_events_handler) (handle_notification): Replace non_stop checks with target_is_non_stop_p() checks. * remote.c (remote_notice_new_inferior): Remove non_stop check. (remote_update_thread_list): Replace non_stop check with target_is_non_stop_p() check. (print_one_stopped_thread): New function. (process_initial_stop_replies): New 'from_tty' parameter. "Notice" all new live inferiors after storing initial stops as pending status in each corresponding thread. If all-stop, stop all threads, try picking a signalled thread as current, and print the status of that one thread. Record the last target status. (remote_start_remote): Replace non_stop checks with target_is_non_stop_p() checks. Don't query for the remote current thread of use qOffsets here. Pass from_tty to process_initial_stop_replies. (extended_remote_attach): Replace non_stop checks with target_is_non_stop_p() checks. (extended_remote_post_attach): Send qOffsets here. (remote_vcont_resume, remote_resume, remote_stop) (remote_interrupt, remote_parse_stop_reply, remote_wait): Replace non_stop checks with target_is_non_stop_p() checks. (remote_async): If target is non-stop, mark/clear the pending events token. * thread.c (switch_to_thread_no_regs): New function.	2015-11-30 18:36:37 +00:00
Pedro Alves	a85a307923	Garbage collect thread continuations ... Nothing uses thread continuations anymore. (inferior continuations are still used by the attach command.) gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * continuations.c (add_continuation, restore_thread_cleanup) (do_all_continuations_ptid, do_all_continuations_thread_callback) (do_all_continuations_thread, do_all_continuations) (discard_all_continuations_thread_callback) (discard_all_continuations_thread, discard_all_continuations) (add_intermediate_continuation) (do_all_intermediate_continuations_thread_callback) (do_all_intermediate_continuations_thread) (do_all_intermediate_continuations) (discard_all_intermediate_continuations_thread_callback) (discard_all_intermediate_continuations_thread) (discard_all_intermediate_continuations): Delete. * continuations.h (add_continuation, do_all_continuations) (do_all_continuations_thread, discard_all_continuations) (discard_all_continuations_thread, add_intermediate_continuation) (do_all_intermediate_continuations) (do_all_intermediate_continuations_thread) (discard_all_intermediate_continuations) (discard_all_intermediate_continuations_thread): Delete declarations. * event-top.c (stdin_event_handler): Delete references to continuations. * gdbthread.h (struct thread_info): Delete continuations and intermediate_continuations fields. * inf-loop.c (inferior_event_handler): Remove references to continuations. * infrun.c (infrun_thread_stop_requested_callback): Remove references to continuations. * target.h (enum inferior_event_type) <INF_EXEC_CONTINUE>: Delete. * thread.c: Don't include "continuations.h". (clear_thread_inferior_resources): Remove references to continuations.	2015-09-09 18:25:33 +01:00
Pedro Alves	243a925328	Replace "struct continuation" mechanism by something more extensible ... This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.	2015-09-09 18:24:00 +01:00
Pedro Alves	372316f128	Teach non-stop to do in-line step-overs (stop all, step, restart) ... That is, step past breakpoints by: - pausing all threads - removing breakpoint at PC - single-step - reinsert breakpoint - restart threads similarly to all-stop (with displaced stepping disabled). This allows non-stop to work on targets/architectures without displaced stepping support. That is, it makes displaced stepping an optimization instead of a requirement. For example, in principle, all GNU/Linux ports support non-stop mode at the target_ops level, but not all corresponding gdbarch's implement displaced stepping. This should make non-stop work for all (albeit, not as efficiently). And then there are scenarios where even if the architecture supports displaced stepping, we can't use it, because we e.g., don't find a usable address to use as displaced step scratch pad. It should also fix stepping past watchpoints on targets that have non-continuable watchpoints in non-stop mode (e.g., PPC, untested). Running the instruction out of line in the displaced stepping scratch pad doesn't help that case, as the copied instruction reads/writes the same watched memory... We can fix that too by teaching GDB to only remove the watchpoint from the thread that we want to move past the watchpoint (currently, removing a watchpoint always removes it from all threads), but again, that can be considered an optimization; not all targets would support it. For those familiar with the gdb and gdbserver Linux target_ops backends, the implementation should look similar, except it is done on the core side. When we pause threads, we may find they stop with an interesting event that should be handled later when the thread is re-resumed, thus we store such events in the thread object, and mark the event as pending. We should only consume pending events if the thread is indeed resumed, thus we add a new "resumed" flag to the thread object. At a later stage, we might add new target methods to accelerate some of this, like "pause all threads", with corresponding RSP packets, but we'd still need a fallback method for remote targets that don't support such packets, so, again, that can be deferred as optimization. My _real_ motivation here is making it possible to reimplement all-stop mode on top of the target always working on non-stop mode, so that e.g., we can send RSP packets to a remote target even while the target is running -- can't do that in the all-stop RSP variant, by design). Tested on x86_64 Fedora 20, with and without "set displaced off" forced. The latter forces the new code paths whenever GDB needs to step past a breakpoint. gdb/ChangeLog: 2015-08-07 Pedro Alves <pedro@codesourcery.com> * breakpoint.c (breakpoints_should_be_inserted_now): If any thread has a pending status, return true. * gdbthread.h: Include target/waitstatus.h. (struct thread_suspend_state) <stop_reason, waitstatus_pending_p, stop_pc>: New fields. (struct thread_info) <resumed>: New field. (set_resumed): Declare. * infrun.c: Include "event-loop.h". (infrun_async_inferior_event_token, infrun_is_async): New globals. (infrun_async): New function. (clear_step_over_info): Add debug output. (displaced_step_in_progress_any_inferior): New function. (displaced_step_fixup): New returns int. (start_step_over): Handle in-line step-overs too. Assert the thread is marked resumed. (resume_cleanups): Clear the thread's resumed flag. (resume): Set the thread's resumed flag. Return early if the thread has a pending status. Allow stepping a breakpoint with no signal. (proceed): Adjust to check 'resumed' instead of 'executing'. (clear_proceed_status_thread): If the thread has a pending status, and that status is a finished step, discard the pending status. (clear_proceed_status): Don't clear step_over_info here. (random_pending_event_thread, do_target_wait): New functions. (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use do_target_wait. (wait_one): New function. (THREAD_STOPPED_BY): New macro. (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint) (thread_stopped_by_hw_breakpoint): New functions. (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New functions. (handle_inferior_event): Also call set_resumed(false) on all threads implicitly stopped by the event. (restart_threads, resumed_thread_with_pending_status): New functions. (finish_step_over): If we were doing an in-line step-over before, and no longer are after trying to start a new step-over, restart all threads. If we have multiple threads with pending events, save the current event and go through the event loop again. (handle_signal_stop): Return early if finish_step_over returns false. <random signal>: If we get a signal while stepping over a breakpoint in-line in non-stop mode, restart all threads. Clear step_over_info before delivering the signal. (keep_going_stepped_thread): Use internal_error instead of gdb_assert. Mark the thread as resumed. (keep_going_pass_signal): Assert the thread isn't already resumed. If some other thread is doing an in-line step-over, defer the resume. If we just started a new in-line step-over, stop all threads. Don't clear step_over_info. (infrun_async_inferior_event_handler): New function. (_initialize_infrun): Create async event handler with infrun_async_inferior_event_handler as callback. (infrun_async): New declaration. * target.c (target_async): New function. * target.h (target_async): Declare macro and readd as function declaration. * target/waitstatus.h (enum target_stop_reason) <TARGET_STOPPED_BY_SINGLE_STEP>: New value. * thread.c (new_thread): Clear the new waitstatus field. (set_resumed): New function.	2015-08-07 17:24:00 +01:00
Pedro Alves	4d9d9d0423	Use keep_going in proceed and start_step_over too ... The main motivation of this patch is sharing more code between the proceed (starting the inferior for the first time) and keep_going (restarting the inferior after handling an event) paths and using the step_over_chain queue now embedded in the thread_info object for pending in-line step-overs too (instead of just for displaced stepping). So this commit: - splits out a new keep_going_pass_signal function out of keep_going that is just like keep_going except for the bits that clear the signal to pass if the signal is set to "handle nopass". - makes proceed use keep_going too. - Makes start_step_over use keep_going_pass_signal instead of lower level displaced stepping things. One user visible change: if inserting breakpoints while trying to proceed fails, we now get: (gdb) si Warning: Could not insert hardware watchpoint 7. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. (gdb) while before we only saw warnings with no indication that the command was cancelled: (gdb) si Warning: Could not insert hardware watchpoint 7. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. (gdb) Tested on x86_64-linux-gnu, ppc64-linux-gnu and s390-linux-gnu. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_info) <prev_pc>: Extend comment. * infrun.c (struct execution_control_state): Move higher up in the file. (reset_ecs): New function. (start_step_over): Now returns int. Rewrite to use keep_going_pass_signal instead of manually starting a displaced step. (resume): Don't call set_running here. If displaced stepping can't start now, clear trap_expected. (find_thread_needs_step_over): Delete function. (proceed): Set up finish_thread_state_cleanup. Call set_running. If the current thread needs a step over, push it in the step-over chain. Don't set insert breakpoints nor call resume directly here. Instead rewrite to use start_step_over and keep_going_pass_signal. (finish_step_over): New function. (handle_signal_stop): Call finish_step_over instead of start_step_over. (switch_back_to_stepped_thread): If the event thread needs another step-over do that first. Use start_step_over. (keep_going_pass_signal): New function, factored out from ... (keep_going): ... here. (_initialize_infrun): Comment moved here. * thread.c (set_running_thread): New function. (set_running, finish_thread_state): Use set_running_thread.	2015-08-07 17:23:58 +01:00
Pedro Alves	c2829269f5	Embed the pending step-over chain in thread_info objects ... In order to teach non-stop mode to do in-line step-overs (pause all threads, remove breakpoint, single-step, reinsert breakpoint, restart threads), we'll need to be able to queue in-line step over requests, much like we queue displaced stepping (out-of-line) requests. Actually, the queue should be the same -- threads wait for their turn to step past something (breakpoint, watchpoint), doesn't matter what technique we end up using when the step over actually starts. I found that the queue management ends up simpler and more efficient if embedded in the thread objects themselves. This commit converts the existing displaced stepping queue to that. Later patches will make the in-line step-overs code paths use it too. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_info) <step_over_prev, step_over_next>: New fields. (thread_step_over_chain_enqueue, thread_step_over_chain_remove) (thread_step_over_chain_next, thread_is_in_step_over_chain): New declarations. * infrun.c (struct displaced_step_request): Delete. (struct displaced_step_inferior_state) <step_request_queue>: Delete field. (displaced_step_prepare): Assert that trap_expected is set. Use thread_step_over_chain_enqueue. Split starting a new displaced step to ... (start_step_over): ... this new function. (resume): Assert the thread isn't waiting for a step over already. (proceed): Assert the thread isn't waiting for a step over already. (infrun_thread_stop_requested): Adjust to remove threads from the embedded step-over chain. (handle_inferior_event) <fork/vfork>: Call start_step_over after displaced_step_fixup. (handle_signal_stop): Call start_step_over after displaced_step_fixup. * infrun.h (step_over_queue_head): New declaration. * thread.c (step_over_chain_enqueue, step_over_chain_remove) (thread_step_over_chain_next, thread_is_in_step_over_chain) (thread_step_over_chain_enqueue) (thread_step_over_chain_remove): New functions. (delete_thread_1): Remove thread from the step-over chain.	2015-08-07 17:23:57 +01:00
Doug Evans	a38fe4fedd	inferior.h (struct inferior_suspend_state): Delete, unused. ... gdb/ChangeLog: * inferior.h (struct inferior_suspend_state): Delete, unused. All references deleted.	2015-06-23 11:36:49 -07:00
Jan Kratochvil	46c03469b3	Remove stop_registers ... Now stop_registers are no longer used and it can be removed. I am not much sure what 'proceed_to_finish' really means now so I make a wild guess while updating comments about it. gdb/ChangeLog 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com> * gdbthread.h (struct thread_control_state): Update comment for proceed_to_finish. * infcall.c (run_inferior_call): Update comment about proceed_to_finish. * infcmd.c (get_return_value): Update comment about stop_registers. (finish_forward): Update comment about proceed_to_finish. * infrun.c (stop_registers): Remove. (clear_proceed_status, normal_stop): Remove stop_registers handling. * infrun.h (stop_registers): Remove.	2015-05-13 20:49:45 +02:00
Pedro Alves	8a06aea71e	update thread list, delete exited threads ... On GNU/Linux, if the running kernel supports clone events, then linux-thread-db.c defers thread listing to the target beneath: static void thread_db_update_thread_list (struct target_ops *ops) { ... if (target_has_execution && !thread_db_use_events ()) ops->beneath->to_update_thread_list (ops->beneath); else thread_db_update_thread_list_td_ta_thr_iter (ops); ... } However, when live debugging, the target beneath, linux-nat.c, does not implement the to_update_thread_list method. The result is that if a thread is marked exited (because it can't be deleted right now, e.g., it was the selected thread), then it won't ever be deleted, until the process exits or is killed/detached. A similar thing happens with the remote.c target. Because its target_update_thread_list implementation skips exited threads when it walks the current thread list looking for threads that no longer exits on the target side, using ALL_NON_EXITED_THREADS_SAFE, stale exited threads are never deleted. This is not a big deal -- I can't think of any way this might be user visible, other than gdb's memory growing a tiny bit whenever a thread gets stuck in exited state. Still, might as well clean things up properly. All other targets use prune_threads, so are unaffected. The fix adds a ALL_THREADS_SAFE macro, that like ALL_NON_EXITED_THREADS_SAFE, walks the thread list and allows deleting the iterated thread, and uses that in places that are walking the thread list in order to delete threads. Actually, after converting linux-nat.c and remote.c to use this, we find the only other user of ALL_NON_EXITED_THREADS_SAFE is also walking the list to delete threads. So we convert that too, and end up deleting ALL_NON_EXITED_THREADS_SAFE. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog 2015-04-07 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ... (ALL_THREADS_SAFE): ... this, and don't skip exited threads. (delete_exited_threads): New declaration. * infrun.c (follow_exec): Use ALL_THREADS_SAFE. * linux-nat.c (linux_nat_update_thread_list): New function. (linux_nat_add_target): Install it. * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE. * thread.c (prune_threads): Use ALL_THREADS_SAFE. (delete_exited_threads): New function.	2015-04-07 15:47:22 +01:00
Pedro Alves	856e7dd698	Make "set scheduler-locking step" depend on user intention, only ... Currently, "set scheduler-locking step" is a bit odd. The manual documents it as being optimized for stepping, so that focus of debugging does not change unexpectedly, but then it says that sometimes other threads may run, and thus focus may indeed change unexpectedly... A user can then be excused to get confused and wonder why does GDB behave like this. I don't think a user should have to know about details of how "next" or whatever other run control command is implemented internally to understand when does the "scheduler-locking step" setting take effect. This patch completes a transition that the code has been moving towards for a while. It makes "set scheduler-locking step" hold threads depending on whether the _command_ the user entered was a stepping command [step/stepi/next/nexti], or not. Before, GDB could end up locking threads even on "continue" if for some reason run control decides a thread needs to be single stepped (e.g., for a software watchpoint). After, if a "continue" happens to need to single-step for some reason, we won't lock threads (unless when stepping over a breakpoint, naturally). And if a stepping command wants to continue a thread for bit, like when skipping a function to a step-resume breakpoint, we'll still lock threads, so focus of debugging doesn't change. In order to make this work, we need to record in the thread structure whether what set it running was a stepping command. (A follow up patch will remove the "step" parameters of 'proceed' and 'resume') FWIW, Fedora GDB, which defaults to "scheduler-locking step" (mainline defaults to "off") carries a different patch that goes in this direction as well. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_control_state) <stepping_command>: New field. * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set the thread's stepping_command field. * infrun.c (resume): Check the thread's stepping_command flag to determine which threads should be resumed. Rename 'entry_step' local to user_step. (clear_proceed_status_thread): Clear 'stepping_command'. (schedlock_applies): Change parameter type to struct thread_info pointer. Adjust. (find_thread_needs_step_over): Remove 'step' parameter. Adjust. (switch_back_to_stepped_thread): Adjust calls to 'schedlock_applies'. (_initialize_infrun): Adjust "set scheduler-locking step" help. gdb/testsuite/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * gdb.threads/schedlock.exp (test_step): No longer expect that "set scheduler-locking step" with "next" over a function call runs threads unlocked. gdb/doc/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * gdb.texinfo (test_step) <set scheduler-locking step>: No longer mention that threads may sometimes run unlocked.	2015-03-24 17:50:31 +00:00
Pedro Alves	885eeb5b8e	Make step_start_function be per thread ... I noticed that step_start_function is still a global, while it obviously should be a per-thread field. gdb/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * infrun.c (step_start_function): Delete and ... * gdbthread.h (struct thread_control_state) <step_start_function>: ... now a field here. * infrun.c (clear_proceed_status_thread): Clear the thread's step_start_function. (proceed, process_event_stop_test, print_stop_event): Adjust.	2015-03-24 17:50:30 +00:00
Pedro Alves	fe978cb071	C++ keyword cleanliness, mostly auto-generated ... This patch renames symbols that happen to have names which are reserved keywords in C++. Most of this was generated with Tromey's cxx-conversion.el script. Some places where later hand massaged a bit, to fix formatting, etc. And this was rebased several times meanwhile, along with re-running the script, so re-running the script from scratch probably does not result in the exact same output. I don't think that matters anyway. gdb/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout. gdb/gdbserver/ 2015-02-27 Tom Tromey <tromey@redhat.com> Pedro Alves <palves@redhat.com> Rename symbols whose names are reserved C++ keywords throughout.	2015-02-27 16:33:07 +00:00
Jan Kratochvil	f0e8c4c5d1	Print current thread after loading a core file ... downstream Fedora request: Please make it easier to find the backtrace of the crashing thread https://bugzilla.redhat.com/show_bug.cgi?id=1024504 Currently after loading a core file GDB prints: Core was generated by `./threadcrash1'. Program terminated with signal SIGSEGV, Segmentation fault. 8 *(volatile int *)0=0; (gdb) _ there is nowhere seen which of the threads had crashed. In reality GDB always numbers that thread as #1 and it is the current thread that time. But after dumping all the info into a file for later analysis it is no longer obvious. 'thread apply all bt' even puts the thread #1 to the _end_ of the output!!! Should GDB always print after loading a core file what "thread" command would print? [Current thread is 1 (Thread 0x7fcbe28fe700 (LWP 15453))] BTW I think it will print the thread even when loading single/non-threaded core file when other inferior(s) exist. But that currently crashes [Bug threads/12074] multi-inferior internal error https://sourceware.org/bugzilla/show_bug.cgi?id=12074 plus I think that would be a correct behavior anyway. gdb/ChangeLog 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> * corelow.c (core_open): Call also thread_command. * gdbthread.h (thread_command): New prototype moved from ... * thread.c (thread_command): ... here. (thread_command): Make it global.	2015-01-22 21:02:24 +01:00
Joel Brobecker	32d0add0a6	Update year range in copyright notice of all files owned by the GDB project. ... gdb/ChangeLog: Update year range in copyright notice of all files.	2015-01-01 13:32:14 +04:00
Siva Chandra	6c659fc2c7	Enable chained function calls in C++ expressions. ... gdb/ChangeLog: * eval.c: Include gdbthread.h. (evaluate_subexp): Enable thread stack temporaries before evaluating a complete expression and clean them up after the evaluation is complete. * gdbthread.h: Include common/vec.h. (value_ptr): New typedef. (VEC (value_ptr)): New vector type. (value_vec): New typedef. (struct thread_info): Add new fields stack_temporaries_enabled and stack_temporaries. (enable_thread_stack_temporaries) (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries): Declare. * gdbtypes.c (class_or_union_p): New function. * gdbtypes.h (class_or_union_p): Declare. * infcall.c (call_function_by_hand): Store return values of class type as temporaries on stack. * thread.c (enable_thread_stack_temporaries): New function. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary): Likewise. (value_in_thread_stack_temporaries): Likewise. * value.c (value_force_lval): New function. * value.h (value_force_lval): Declare. gdb/testsuite/ChangeLog: * gdb.cp/chained-calls.cc: New file. * gdb.cp/chained-calls.exp: New file. * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".	2014-11-28 16:01:16 -08:00
Pedro Alves	7f5ef60532	PR gdb/12623: non-stop crashes inferior, PC adjustment and 1-byte insns ... TL;DR - if we step an instruction that is as long as decr_pc_after_break (1-byte on x86) right after removing the breakpoint at PC, in non-stop mode, adjust_pc_after_break adjusts the PC, but it shouldn't. In non-stop mode, when a breakpoint is removed, it is moved to the "moribund locations" list. This is because other threads that are running may have tripped on that breakpoint as well, and we haven't heard about it. When a trap is reported, we check if perhaps it was such a deleted breakpoint that caused the trap. If so, we also need to adjust the PC (decr_pc_after_break). Now, say that, on x86: - a breakpoint was placed at an address where we have an instruction of the same length as decr_pc_after_break on this arch (1 on x86). - the breakpoint is removed, and thus put on the moribund locations list. - the thread is single-stepped. As there's no breakpoint inserted at PC anymore, the single-step actually executes the 1-byte instruction normally. GDB should _not_ adjust the PC for the resulting SIGTRAP. But, adjust_pc_after_break confuses the step SIGTRAP reported for this single-step as being a SIGTRAP for the moribund location of the breakpoint that used to be at the previous PC, and so infrun applies the decr_pc_after_break adjustment incorrectly. The confusion comes from the special case mentioned in the comment: static void adjust_pc_after_break (struct execution_control_state *ecs) { ... As a special case, we could have hardware single-stepped a software breakpoint. In this case (prev_pc == breakpoint_pc), we also need to back up to the breakpoint address. */ if (thread_has_single_step_breakpoints_set (ecs->event_thread) || !ptid_equal (ecs->ptid, inferior_ptid) || !currently_stepping (ecs->event_thread) || (ecs->event_thread->stepped_breakpoint && ecs->event_thread->prev_pc == breakpoint_pc)) regcache_write_pc (regcache, breakpoint_pc); The condition that incorrectly triggers is the "ecs->event_thread->prev_pc == breakpoint_pc" one. Afterwards, the next resume resume re-executes an instruction that had already executed, which if you're lucky, results in the inferior crashing. If you're unlucky, you'll get silent bad behavior... The fix is to remember that we stepped a breakpoint. Turns out the only case we step a breakpoint instruction today isn't covered by the testsuite. It's the case of a 'handle nostop" signal arriving while a step is in progress _and_ we have a software watchpoint, which forces always single-stepping. This commit extends sigstep.exp to cover that, and adds a new test for the adjust_pc_after_break issue. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-28 Pedro Alves <palves@redhat.com> PR gdb/12623 * gdbthread.h (struct thread_info) <stepped_breakpoint>: New field. * infrun.c (resume) <stepping breakpoint instruction>: Set the thread's stepped_breakpoint field. Skip if reverse debugging. Add comment. (init_thread_stepping_state, handle_signal_stop): Clear the thread's stepped_breakpoint field. gdb/testsuite/ 2014-10-28 Pedro Alves <palves@redhat.com> PR gdb/12623 * gdb.base/sigstep.c (no_handler): New global. (main): If 'no_handler is true, set the signal handlers to SIG_IGN. * gdb.base/sigstep.exp (breakpoint_over_handler): Add with_sw_watch and no_handler parameters. Handle them. (top level) <stepping over handler when stopped at a breakpoint test>: Add a test axis for testing with a software watchpoint, and another for testing with the signal handler set to SIG_IGN. * gdb.base/step-sw-breakpoint-adjust-pc.c: New file. * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.	2014-10-28 16:00:06 +00:00
Doug Evans	28153fd321	Fix some comments to say minus_one_ptid instead of PID == -1. ... gdb/ChangeLog: * gdbthread.h (set_running): Fix comment. (set_executing, finish_thread_state): Fix comment.	2014-10-19 13:36:54 -07:00
Pedro Alves	ab970af197	remote: get rid of all the T packets when syncing the thread list ... This commit avoids the prune_threads call in the remote target's target_update_thread_list's implementation, eliminating all the "thread alive" RSP traffic (one packet per thread) whenever we fetch the thread list. IOW, this: Sending packet: $Tp2141.2150#82...Packet received: OK Sending packet: $Tp2141.214f#b7...Packet received: OK Sending packet: $Tp2141.2141#82...Packet received: OK ... more T packets; it's one per previously known live thread ... Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n Becomes: Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n Tested on x86_64 Fedora 20, native gdbserver: - tests the qXfer:threads:read method. Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read force-disabled in gdbserver: - So that GDB falls back to the qfThreadInfo/qsThreadInfo method. And also manually smoked tested force disabling both qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver. gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro. * remote.c (remote_update_thread_list): Skip calling prune_threads if any thread listing method is supported, and instead walk over the set of remote threads listed, deleting those that are not found in GDB's thread list.	2014-10-15 22:55:14 +01:00
Pedro Alves	e8032dde10	Push pruning old threads down to the target ... When GDB wants to sync the thread list with the target's (e.g., due to "info threads"), it calls update_thread_list: update_thread_list (void) { prune_threads (); target_find_new_threads (); update_threads_executing (); } And then prune_threads does: prune_threads (void) { struct thread_info *tp, *next; for (tp = thread_list; tp; tp = next) { next = tp->next; if (!thread_alive (tp)) delete_thread (tp->ptid); } } Calling thread_live on each thread one by one is expensive. E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not a big deal, but still a bunch of syscalls... With the remote target, it's cumbersome. That thread_alive call ends up generating one T packet per thread: Sending packet: $Tp2141.2150#82...Packet received: OK Sending packet: $Tp2141.214f#b7...Packet received: OK Sending packet: $Tp2141.2141#82...Packet received: OK Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n That seems a bit silly when target_find_new_threads method implementations will always fetch the whole current set of target threads, and then add those that are not in GDB's thread list, to GDB's thread list. This patch thus pushes down the responsibility of pruning dead threads to the target_find_new_threads method instead, so a target may implement pruning dead threads however it wants. Once we do that, target_find_new_threads becomes a misnomer, so the patch renames it to target_update_thread_list. The patch doesn't attempt to do any optimization to any target yet. It simply exports prune_threads, and makes all implementations of target_update_thread_list call that. It's meant to be a no-op. gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * ada-tasks.c (print_ada_task_info, task_command_1): Adjust. * bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ... (bsd_uthread_update_thread_list): ... this. Call prune_threads. (bsd_uthread_target): Adjust. * corelow.c (core_open): Adjust. * dec-thread.c (dec_thread_find_new_threads): Update comment. (dec_thread_update_thread_list): New function. (init_dec_thread_ops): Adjust. * gdbthread.h (prune_threads): New declaration. * linux-thread-db.c (thread_db_find_new_threads): Rename to ... (thread_db_update_thread_list): ... this. Call prune_threads. (init_thread_db_ops): Adjust. * nto-procfs.c (procfs_find_new_threads): Rename to ... (procfs_update_thread_list): ... this. Call prune_threads. (procfs_attach, procfs_create_inferior, init_procfs_targets): Adjust. * obsd-nat.c (obsd_find_new_threads): Rename to ... (obsd_update_thread_list): ... this. Call prune_threads. (obsd_add_target): Adjust. * procfs.c (procfs_target): Adjust. (procfs_notice_thread): Update comment. (procfs_find_new_threads): Rename to ... (procfs_update_thread_list): ... this. Call prune_threads. * ravenscar-thread.c (ravenscar_update_inferior_ptid): Update comment. (ravenscar_wait): Adjust. (ravenscar_find_new_threads): Rename to ... (ravenscar_update_thread_list): ... this. Call prune_threads. (init_ravenscar_thread_ops): Adjust. * record-btrace.c (record_btrace_find_new_threads): Rename to ... (record_btrace_update_thread_list): ... this. Adjust comment. (init_record_btrace_ops): Adjust. * remote.c (remote_threads_info): Rename to ... (remote_update_thread_list): ... this. Call prune_threads. (remote_start_remote, extended_remote_attach_1, init_remote_ops): Adjust. * sol-thread.c (check_for_thread_db): Adjust. (sol_find_new_threads_callback): Rename to ... (sol_update_thread_list_callback): ... this. (sol_find_new_threads): Rename to ... (sol_update_thread_list): ... this. Call prune_threads. Adjust. (sol_get_ada_task_ptid, init_sol_thread_ops): Adjust. * target-delegates.c: Regenerate. * target.c (target_find_new_threads): Rename to ... (target_update_thread_list): ... this. * target.h (struct target_ops): Rename to_find_new_threads field to to_update_thread_list. (target_find_new_threads): Rename to ... (target_update_thread_list): ... this. * thread.c (prune_threads): Make extern. (update_thread_list): Adjust.	2014-10-15 22:54:13 +01:00
Pedro Alves	34b7e8a6ad	Make single-step breakpoints be per-thread ... This patch finally makes each thread have its own set of single-step breakpoints. This paves the way to have multiple threads software single-stepping, though this patch doesn't flip that switch on yet. That'll be done on a subsequent patch. gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * breakpoint.c (single_step_breakpoints): Delete global. (insert_single_step_breakpoint): Adjust to store the breakpoint pointer in the current thread. (single_step_breakpoints_inserted, remove_single_step_breakpoints) (cancel_single_step_breakpoints): Delete functions. (breakpoint_has_location_inserted_here): Make extern. (single_step_breakpoint_inserted_here_p): Adjust to walk the breakpoint list. * breakpoint.h (breakpoint_has_location_inserted_here): New declaration. (single_step_breakpoints_inserted, remove_single_step_breakpoints) (cancel_single_step_breakpoints): Remove declarations. * gdbthread.h (struct thread_control_state) <single_step_breakpoints>: New field. (delete_single_step_breakpoints) (thread_has_single_step_breakpoints_set) (thread_has_single_step_breakpoint_here): New declarations. * infrun.c (follow_exec): Also clear the single-step breakpoints. (singlestep_breakpoints_inserted_p, singlestep_ptid) (singlestep_pc): Delete globals. (infrun_thread_ptid_changed): Remove references to removed globals. (resume_cleanups): Delete the current thread's single-step breakpoints. (maybe_software_singlestep): Remove references to removed globals. (resume): Adjust to use thread_has_single_step_breakpoints_set and delete_single_step_breakpoints. (init_wait_for_inferior): Remove references to removed globals. (delete_thread_infrun_breakpoints): Delete the thread's single-step breakpoints too. (delete_just_stopped_threads_infrun_breakpoints): Don't delete single-step breakpoints here. (delete_stopped_threads_single_step_breakpoints): New function. (adjust_pc_after_break): Adjust to use thread_has_single_step_breakpoints_set. (handle_inferior_event): Remove references to removed globals. Use delete_stopped_threads_single_step_breakpoints. (handle_signal_stop): Adjust to per-thread single-step breakpoints. Swap test order to do cheaper tests first. (switch_back_to_stepped_thread): Extend debug output. Remove references to removed globals. * record-full.c (record_full_wait_1): Adjust to per-thread single-step breakpoints. * thread.c (delete_single_step_breakpoints) (thread_has_single_step_breakpoints_set) (thread_has_single_step_breakpoint_here): New functions. (clear_thread_inferior_resources): Also delete the thread's single-step breakpoints.	2014-10-15 20:18:32 +01:00
Pedro Alves	963f9c80cb	Rewrite non-continuable watchpoints handling ... When GDB finds out the target triggered a watchpoint, and the target has non-continuable watchpoints, GDB sets things up to step past the instruction that triggered the watchpoint. This is just like stepping past a breakpoint, but goes through a different mechanism - it resumes only the thread that needs to step past the watchpoint, but also switches a "infwait state" global, that has the effect that the next target_wait only wait for events only from that thread. This forcing of a ptid to pass to target_wait obviously becomes a bottleneck if we ever support stepping past different watchpoints simultaneously (in separate processes). It's also unnecessary -- the target should only return events for threads that have been resumed; if no other thread than the one we're stepping past the watchpoint has been resumed, then those other threads should not report events. If we couldn't assume that, then stepping past regular breakpoints would be broken for not likewise forcing a similar infwait_state. So this patch eliminates infwait_state, and instead teaches keep_going to mark step_over_info in a way that has the breakpoints module skip inserting watchpoints (because we're stepping past one), like it skips breakpoints when we're stepping past one. Tested on: - x86_64 Fedora 20 (continuable watchpoints) - PPC64 Fedora 18 (non-steppable watchpoints) gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * breakpoint.c (should_be_inserted): Don't insert watchpoints if trying to step past a non-steppable watchpoint. * gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New field. * infrun.c (struct step_over_info): Add new field 'nonsteppable_watchpoint_p' and adjust comments. (set_step_over_info): New 'nonsteppable_watchpoint_p' parameter. Adjust. (clear_step_over_info): Clear nonsteppable_watchpoint_p as well. (stepping_past_nonsteppable_watchpoint): New function. (step_over_info_valid_p): Also return true if stepping past a nonsteppable watchpoint. (proceed): Adjust call to set_step_over_info. Remove reference to init_infwait_state. (init_wait_for_inferior): Remove reference to init_infwait_state. (waiton_ptid): Delete global. (struct execution_control_state) <stepped_after_stopped_by_watchpoint>: Delete field. (wait_for_inferior, fetch_inferior_event): Always pass minus_one_ptid to target_wait. (init_thread_stepping_state): Clear 'stepping_over_watchpoint' field. (init_infwait_state): Delete function. (handle_inferior_event): Remove infwait_state handling. (handle_signal_stop) <watchpoints handling>: Adjust after stepped_after_stopped_by_watchpoint removal. Don't remove breakpoints here nor set infwait_state. Set the thread's stepping_over_watchpoint flag, and call keep_going instead. (keep_going): Handle stepping_over_watchpoint. Adjust set_step_over_info calls. * infrun.h (stepping_past_nonsteppable_watchpoint): Declare function.	2014-10-15 20:18:30 +01:00
Pedro Alves	b57bacecd5	Fix non-stop regressions caused by "breakpoints always-inserted off" changes ... Commit a25a5a45 (Fix "breakpoint always-inserted off"; remove "breakpoint always-inserted auto") regressed non-stop remote debugging. This was exposed by mi-nsintrall.exp intermittently failing with a spurious SIGTRAP. The problem is that when debugging with "target remote", new threads the target has spawned but have never reported a stop aren't visible to GDB until it explicitly resyncs its thread list with the target's. For example, in a program like this: int main (void) { pthread_t child_thread; pthread_create (&child_thread, NULL, child_function, NULL); return 0; <<<< set breakpoint here } If the user sets a breakpoint at the "return" statement, and runs the program, when that breakpoint hit is reported, GDB is only aware of the main thread. So if we base the decision to remove or insert breakpoints from the target based on whether all the threads we know about are stopped, we'll miss that child_thread is running, and thus we'll remove breakpoints from the target, even through they should still remain inserted, otherwise child_thread will miss them. The break-while-running.exp test actually should also be exposing this thread-list-out-of-synch problem. That test sets a breakpoint while the main thread is stopped, but other threads are running. Because other threads are running, the breakpoint is supposed to be inserted immediately. But, unless something forces a refetch of the thread list, like, e.g., "info threads", GDB won't be aware of the other threads that had been spawned by the main thread, and so won't insert new or old breakpoints in the target. And it turns out that the test is exactly doing an explicit "info threads", masking out the problem... This commit adjust the test to exercise the case of not issuing "info threads". The test then fails without the GDB fix. In the ni-nsintrall.exp case, what happens is that several threads hit the same breakpoint, and when the first thread reports the stop, because GDB wasn't aware other threads exist, all threads known to GDB are found stopped, so GDB removes the breakpoints from the target. The other threads follow up with SIGTRAPs too for that same breakpoint, which has already been removed. For the first few threads, the moribund breakpoints machinery suppresses the SIGTRAPs, but after a few events (precisely '3 * thread_count () + 1' at the time the breakpoint was removed, see update_global_location_list), the moribund breakpoint machinery is no longer aware of the removed breakpoint, and the SIGTRAP is reported as a spurious stop. The fix is naturally then to stop assuming that if no thread in the list is executing, then the target is fully stopped. We can't know that until we fully sync the thread list. Because updating the thread list on every stop would be too much RSP traffic, I chose instead to update it whenever we're about to present a stop to the user. Actually updating the thread list at that point happens to be an item I had added to the local/remote parity wiki page a while ago: Native GNU/Linux debugging adds new threads to the thread list as the program creates them "The [New Thread foo] messages". Remote debugging can't do that, and it's arguable whether we shouldn't even stop native debugging from doing that, as it hinders inferior performance. However, a related issue is that with remote targets (and gdbserver), even after the program stops, the user still needs to do "info threads" to pull an updated thread list. This, should most likely be addressed, so that GDB pulls the list itself, perhaps just before presenting a stop to the user. With that in place, the need to delay "Program received signal FOO" was actually caught by the manythreads.exp test. Without that bit, I was getting: [Thread 0x7ffff7f13700 (LWP 4499) exited] [New Thread 0x7ffff7f0b700 (LWP 4500)] ^C Program received signal SIGINT, Interrupt. [New Thread 0x7ffff7f03700 (LWP 4501)] <<< new output [Switching to Thread 0x7ffff7f0b700 (LWP 4500)] __GI___nptl_death_event () at events.c:31 31 { (gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1 That is, I was now getting "New Thread" lines after the "Program received signal" line, and the test doesn't expect them. As the number of new threads discovered before and after the "Program received signal" output is unbounded, it's much nicer to defer "Program received signal" until after synching the thread list, thus close to the "switching to thread" output and "current frame/source" info: [Thread 0x7ffff7863700 (LWP 7647) exited] ^C[New Thread 0x7ffff786b700 (LWP 7648)] Program received signal SIGINT, Interrupt. [Switching to Thread 0x7ffff7fc4740 (LWP 6243)] __GI___nptl_create_event () at events.c:25 25 { (gdb) PASS: gdb.threads/manythreads.exp: stop threads 1 Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-02 Pedro Alves <palves@redhat.com> * breakpoint.c (breakpoints_should_be_inserted_now): Use threads_are_executing. * breakpoint.h (breakpoints_should_be_inserted_now): Add describing comment. * gdbthread.h (threads_are_executing): Declare. (handle_signal_stop) <random signals>: Don't print about the signal here if stopping. (end_stepping_range): Don't notify observers here. (normal_stop): Update the thread list. If stopped by a random signal or a stepping range ended, notify observers. * thread.c (threads_executing): New global. (init_thread_list): Clear 'threads_executing'. (set_executing): Set or clear 'threads_executing'. (threads_are_executing): New function. (update_threads_executing): New function. (update_thread_list): Use it. gdb/testsuite/ 2014-10-02 Pedro Alves <palves@redhat.com> * gdb.threads/break-while-running.exp (test): Add new 'update_thread_list' argument. Skip "info threads" if false. (top level): Add new 'update_thread_list' axis.	2014-10-02 10:08:00 +01:00
Pedro Alves	32990adaad	Reduce Hg packet (select remote general thread) bouncing ... A patch I wrote made GDB pull the thread list sooner when debugging with target remote, and I noticed an intended consequence. GDB started bouncing around the currently selected remote/general thread more frequently. E.g.: Sending packet: $qTMinFTPILen#3b...Packet received: 5 +Sending packet: $Hgp726d.726d#53...Packet received: OK Sending packet: $m400680,40#2f...Packet received: 85c0741455bff00d60004889e5ffd05de97bffffff0f1f00e973ffffff0f1f00554889e5c745fc00000000c745fc01000000e900000000c745fc02000000b800 +Sending packet: $Hgp726d.7278#28...Packet received: OK Sending packet: $m4006b2,1#28...Packet received: e9 Fast tracepoint 2 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes:: This ended up breaking "tstart" when one has fast tracepoints set, because gdbserver isn't expecting an Hg packet in response to qRelocInsn: (gdb) ftrace *set_point Fast tracepoint 3 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. (gdb) PASS: gdb.trace/range-stepping.exp: ftrace: ftrace *set_point tstart gdbserver: Malformed response to qRelocInsn, ignoring: Hgp2783.2783 Target does not support this command. (gdb) FAIL: gdb.trace/range-stepping.exp: ftrace: tstart remote_trace_start should probably start by making sure the remote current thread matches inferior_ptid (calling set_general_thread), but still, reducing unnecessary bouncing is a good idea. It happens because the memory/symbol/breakpoint routines use switch_to_program_space_and_thread to do something in the right context and then revert back to the previously current thread. The fix is to simply make any_thread_of_process, find_inferior_for_program_space, etc. give preference to the current thread/inferior it if matches. gdb/ 2014-10-02 Pedro Alves <palves@redhat.com> * gdbthread.h (any_thread_of_process, any_live_thread_of_process): Adjust comments. * inferior.c (find_inferior_for_program_space): Give preference to the current inferior. * inferior.h (find_inferior_for_program_space): Update comment. * progspace.c (switch_to_program_space_and_thread): Prefer the current inferior if it's bound to the program space requested. If the inferior found doesn't have a PID yet, don't bother looking up a thread. * progspace.h (switch_to_program_space_and_thread): Adjust comment. * thread.c (any_thread_of_process, any_live_thread_of_process): Give preference to the current thread.	2014-10-02 09:55:38 +01:00
Pedro Alves	705096250d	Always pass signals to the right thread ... Currently, GDB can pass a signal to the wrong thread in several different but related scenarios. E.g., if thread 1 stops for signal SIGFOO, the user switches to thread 2, and then issues "continue", SIGFOO is actually delivered to thread 2, not thread 1. This obviously messes up programs that use pthread_kill to send signals to specific threads. This has been a known issue for a long while. Back in 2008 when I made stop_signal be per-thread (2020b7ab), I kept the behavior -- see code in 'proceed' being removed -- wanting to come back to it later. The time has finally come now. The patch fixes this -- on resumption, intercepted signals are always delivered to the thread that had intercepted them. Another example: if thread 1 stops for a breakpoint, the user switches to thread 2, and then issues "signal SIGFOO", SIGFOO is actually delivered to thread 1, not thread 2, because 'proceed' first switches to thread 1 to step over its breakpoint... If the user deletes the breakpoint before issuing "signal FOO", then the signal is delivered to thread 2 (the current thread). "signal SIGFOO" can be used for two things: inject a signal in the program while the program/thread had stopped for none, bypassing "handle nopass"; or changing/suppressing a signal the program had stopped for. These scenarios are really two faces of the same coin, and GDB can't really guess what the user is trying to do. GDB might have intercepted signals in more than one thread even (see the new signal-command-multiple-signals-pending.exp test). At least in the inject case, it's obviously clear to me that the user means to deliver the signal to the currently selected thread, so best is to make the command's behavior consistent and easy to explain. Then, if the user is trying to suppress/change a signal the program had stopped for instead of injecting a new signal, but, the user had changed threads meanwhile, then she will be surprised that with: (gdb) continue Thread 1 stopped for signal SIGFOO. (gdb) thread 2 (gdb) signal SIGBAR ... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2 (with scheduler-locking off, which is the default, because then "signal" or any other resumption command resumes all threads). So the patch makes GDB detect that, and ask for confirmation: (gdb) thread 1 [Switching to thread 1 (Thread 10979)] (gdb) signal SIGUSR2 Note: Thread 3 previously stopped with signal SIGUSR2, User defined signal 2. Thread 2 previously stopped with signal SIGUSR1, User defined signal 1. Continuing thread 1 (the current thread) with specified signal will still deliver the signals noted above to their respective threads. Continue anyway? (y or n) All these scenarios are covered by the new tests. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-07-25 Pedro Alves <palves@redhat.com> * NEWS: Mention signal passing and "signal" command changes. * gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend comment. * breakpoint.c (until_break_command): Adjust clear_proceed_status call. * infcall.c (run_inferior_call): Adjust clear_proceed_status call. * infcmd.c (proceed_thread_callback, continue_1, step_once) (jump_command): Adjust clear_proceed_status call. (signal_command): Warn if other thread that are resumed have signals that will be delivered. Adjust clear_proceed_status call. (until_next_command, finish_command) (proceed_after_attach_callback, attach_command_post_wait) (attach_command): Adjust clear_proceed_status call. * infrun.c (proceed_after_vfork_done): Likewise. (proceed_after_attach_callback): Adjust comment. (clear_proceed_status_thread): Clear stop_signal if not in pass state. (clear_proceed_status_callback): Delete. (clear_proceed_status): New 'step' parameter. Only clear the proceed status of threads the command being prepared is about to resume. (proceed): If passed in an explicit signal, override stop_signal with it. Don't pass the last stop signal to the thread we're resuming. (init_wait_for_inferior): Adjust clear_proceed_status call. (switch_back_to_stepped_thread): Clear the signal if it should not be passed. * infrun.h (clear_proceed_status): New 'step' parameter. (user_visible_resume_ptid): Add comment. * linux-nat.c (linux_nat_resume_callback): Don't check whether the signal is in pass state. * remote.c (append_pending_thread_resumptions): Likewise. * mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call. gdb/doc/ 2014-07-25 Pedro Alves <palves@redhat.com> Eli Zaretskii <eliz@gnu.org> * gdb.texinfo (Signaling) <signal command>: Explain what happens with multi-threaded programs. gdb/testsuite/ 2014-07-25 Pedro Alves <palves@redhat.com> * gdb.threads/signal-command-handle-nopass.c: New file. * gdb.threads/signal-command-handle-nopass.exp: New file. * gdb.threads/signal-command-multiple-signals-pending.c: New file. * gdb.threads/signal-command-multiple-signals-pending.exp: New file. * gdb.threads/signal-delivered-right-thread.c: New file. * gdb.threads/signal-delivered-right-thread.exp: New file.	2014-07-25 16:57:31 +01:00
Doug Evans	e86c23a851	Revert gdbthread.h (any_running): Declare. ... Not properly marked as 1/2. This reverts commit 1a76d59888.	2014-07-10 12:30:05 -07:00
Doug Evans	1a76d59888	* gdbthread.h (any_running): Declare. ... * thread.c (any_running): New function.	2014-07-10 11:15:32 -07:00
Yao Qi	78c164b006	Remove any_running ... Function any_running isn't used. This patch is to remove it. Rebuild GDB for linux and mingw. gdb: 2014-06-19 Yao Qi <yao@codesourcery.com> * gdbthread.h (any_running): Remove the declaration. * thread.c (any_running): Remove.	2014-06-19 20:15:06 +08:00
Yao Qi	f6e29b6ec0	Use enum thread_state ... This patch is to change field state's type to 'enum thread_state', and replace RUNNING with THREAD_RUNNING and STOPPED with THREAD_STOPPED respectively in comments. gdb: 2014-06-19 Yao Qi <yao@codesourcery.com> * gdbthread.h (struct thread_info) <state>: Change its type to 'enum thread_state'. Update comments.	2014-06-19 20:14:43 +08:00
Pedro Alves	034f788c5e	Fix next over threaded execl with "set scheduler-locking step". ... Running gdb.threads/thread-execl.exp with scheduler-locking set to "step" reveals a problem: (gdb) next^M [Thread 0x7ffff7fda700 (LWP 27168) exited]^M [New LWP 27168]^M [Thread 0x7ffff74ee700 (LWP 27174) exited]^M process 27168 is executing new program: /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.threads/thread-execl^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M infrun.c:5225: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M Quit this debugging session? (y or n) FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (GDB internal error) The assertion is correct. The issue is that GDB is mistakenly trying to switch back to an exited thread, that was previously stepping when it exited. This is exactly the sort of thing the test wants to make sure doesn't happen: # Now set a breakpoint at `main', and step over the execl call. The # breakpoint at main should be reached. GDB should not try to revert # back to the old thread from the old image and resume stepping it We don't see this bug with schedlock off only because a different sequence of events makes GDB manage to delete the thread instead of marking it exited. This particular internal error can be fixed by making the loop over all threads in switch_back_to_stepped_thread skip exited threads. But, looking over other ALL_THREADS users, all either can or should be skipping exited threads too. So for simplicity, this patch replaces ALL_THREADS with a new macro that skips exited threads itself, and updates everything to use it. Tested on x86_64 Fedora 20. gdb/ 2014-06-19 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_THREADS): Delete. (ALL_NON_EXITED_THREADS): New macro. * btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * infrun.c (find_thread_needs_step_over) (switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * record-btrace.c (record_btrace_open) (record_btrace_stop_recording, record_btrace_close) (record_btrace_is_replaying, record_btrace_resume) (record_btrace_find_thread_to_move, record_btrace_wait): Likewise. * remote.c (append_pending_thread_resumptions): Likewise. * thread.c (thread_apply_all_command): Likewise. gdb/testsuite/ 2014-06-19 Pedro Alves <palves@redhat.com> * gdb.threads/thread-execl.exp (do_test): New procedure, factored out from ... (top level): ... here. Iterate running tests under different scheduler-locking settings.	2014-06-19 11:59:03 +01:00
Pedro Alves	17b2616cba	PR gdb/13860: don't lose '-interpreter-exec console EXECUTION_COMMAND''s output in async mode. ... The other part of PR gdb/13860 is about console execution commands in MI getting their output half lost. E.g., take the finish command, executed on a frontend's GDB console: sync: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) ~"0x00000000004004d7 in foo () at stepinf.c:6\n" ~"6\t usleep (10);\n" ~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1" async: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" Note how all the "Value returned" etc. output is missing in async mode. The same happens with e.g., catchpoints: =breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"} ~"\nCatchpoint " ~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n" ~"131\t pid = ARCH_FORK ();\n" *stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0" where all those ~ lines are missing in async mode, or just the "step" current line indication: s &"s\n" ^running *running,thread-id="all" (gdb) ~"13\t foo ();\n" *stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3" (gdb) Or in the case of the PRs example, the "Stopped due to shared library event" note: start &"start\n" ~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"} ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="21990" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" ~"Stopped due to shared library event (no libraries added or removed)\n" *stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3" (gdb) IMO, if you're typing execution commands in a frontend's console, you expect to see their output. Indeed it's what you get in sync mode. I think async mode should do the same. Deciding what to mirror to the console wrt to breakpoints and random stops gets messy real fast. E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the event to the console in this case. But what about more complicated cases like "s&; thread n; s&", and one of those steps spawning a new thread, and that thread hitting a breakpoint? It's impossible in general to track whether the thread had any relation to the commands that had been executed. So I think we should just simplify and always mirror breakpoints and random events to the console. Notes: - mi->out is the same as gdb_stdout when MI is the current interpreter. I think that referring to that directly is cleaner. An earlier revision of this patch made the changes that are now done in mi_on_normal_stop directly in infrun.c:normal_stop, and so not having an obvious place to put the new uiout by then, and not wanting to abuse CLI's uiout, I made a temporary uiout when necessary. - Hopefuly the rest of the patch is more or less obvious given the comments added. Tested on x86_64 Fedora 20, no regressions. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdbthread.h (struct thread_control_state): New field `command_interp'. * infrun.c (follow_fork): Copy the new thread control field to the child fork thread. (clear_proceed_status_thread): Clear the new thread control field. (proceed): Set the new thread control field. * interps.h (command_interp): Declare. * interps.c (command_interpreter): New global. (command_interp): New function. (interp_exec): Set `command_interpreter' while here. * cli-out.c (cli_uiout_dtor): New function. (cli_ui_out_impl): Install it. * mi/mi-interp.c: Include cli-out.h. (mi_cmd_interpreter_exec): Add comment. (restore_current_uiout_cleanup): New function. (ui_out_free_cleanup): New function. (mi_on_normal_stop): If finishing an execution command started by a CLI command, or any kind of breakpoint-like event triggered, print the stop event to the output (CLI) stream. * mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global. (top level): Test that output related to execution commands is sent to the console with CLI commands, but not with MI commands. Test that breakpoint events are always mirrored to the console. Also expect the new source line to be output after a "next" in async mode too. Make it a pass/fail test. * gdb.mi/mi-solib.exp: Test that the CLI solib event note is output. * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.	2014-05-21 23:17:23 +01:00
Joel Brobecker	ecd75fc8ee	Update Copyright year range in all files maintained by GDB.	2014-01-01 07:54:24 +04:00
Luis Machado	dfd4cc6311	* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid. ... Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build.	2013-09-30 11:50:12 +00:00
Pedro Alves	c1e36e3e91	range stepping: gdb ... This patch teaches GDB to take advantage of target-assisted range stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r), meaning, "step once, and keep stepping as long as the thread is in the [ADDR1,ADDR2) range". Rationale: When user issues the "step" command on the following line of source, a = b + c + d * e - a; GDB single-steps every single instruction until the program reaches a new different line. E.g., on x86_64, that line compiles to: 0x08048434 <+65>: mov 0x1c(%esp),%eax 0x08048438 <+69>: mov 0x30(%esp),%edx 0x0804843c <+73>: add %eax,%edx 0x0804843e <+75>: mov 0x18(%esp),%eax 0x08048442 <+79>: imul 0x2c(%esp),%eax 0x08048447 <+84>: add %edx,%eax 0x08048449 <+86>: sub 0x34(%esp),%eax 0x0804844d <+90>: mov %eax,0x34(%esp) 0x08048451 <+94>: mov 0x1c(%esp),%eax and the following is the RSP traffic between GDB and GDBserver: --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0; IOW, a lot of roundtrips between GDB and GDBserver. If we add a new command to the RSP, meaning "keep stepping and don't report a stop until the program goes out of the [0x08048434, 0x08048451) address range", then the RSP traffic can be reduced down to: --> vCont;r8048434,8048451:p2db0.2db0;c <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1; As number of packets is reduced dramatically, the performance of stepping source lines is much improved. In case something is wrong with range stepping on the stub side, the debug info or even gdb, this adds a "set/show range-stepping" command to be able to turn range stepping off. gdb/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_control_state) <may_range_step>: New field. * infcmd.c (step_once, until_next_command): Enable range stepping. * infrun.c (displaced_step_prepare): Disable range stepping. (resume): Disable range stepping if stepping over a breakpoint or we have software watchpoints. If range stepping is enabled, assert the thread is in the stepping range. (clear_proceed_status_thread): Clear may_range_step. (handle_inferior_event): Disable range stepping as soon as we know the thread that hit the event. Re-enable it whenever we're going to step with a step range. * remote.c (struct vCont_action_support) <r>: New field. (use_range_stepping): New global. (remote_vcont_probe): Handle 'r' action. (append_resumption): Append an 'r' action if the thread may range step. (show_range_stepping): New function. (set_range_stepping): New function. (_initialize_remote): Call add_setshow_boolean_cmd to register the 'set range-stepping' and 'show range-stepping' commands. * NEWS: Mention range stepping, the new vCont;r action, and the new "set/show range-stepping" commands. gdb/doc/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdb.texinfo (Packets): Document 'vCont;r'. (Continuing and Stepping): Document target-assisted range stepping, and the 'set range-stepping' and 'show range-stepping' commands.	2013-05-23 17:15:35 +00:00
Pedro Alves	ce4c476a0f	Factor out in-stepping-range checks. ... This adds a function for doing within-thread's-stepping-range checks, and converts a couple spots to use it. Following patches will add more uses. gdb/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdbthread.h (pc_in_thread_step_range): New declaration. * thread.c (pc_in_thread_step_range): New function. * infrun.c (handle_inferior_event): Use it.	2013-05-23 17:12:51 +00:00
Markus Metzger	02d2762576	Add branch trace information to struct thread_info. ... Add functions to enable, disable, clear, and fetch a thread's branch trace. gdb/ * target.h: Include btrace.h. (struct target_ops) <to_supports_btrace, to_enable_btrace, to_disable_btrace, to_teardown_btrace, to_read_btrace>: New. * target.c (target_supports_btrace): New function. (target_enable_btrace): New function. (target_disable_btrace): New function. (target_teardown_btrace): New function. (target_read_btrace): New function. * btrace.h: New file. * btrace.c: New file. * Makefile.in: Add btrace.c. * gdbthread.h: Include btrace.h. (struct thread_info): Add btrace field. * thread.c: Include btrace.h. (clear_thread_inferior_resources): Call target_teardown_btrace. * common/btrace-common.h: New file.	2013-03-11 08:17:08 +00:00
Joel Brobecker	28e7fd6234	Update years in copyright notice for the GDB files. ... Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.	2013-01-01 06:33:28 +00:00
Pedro Alves	e5ef252af0	gdb/ ... 2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_THREADS): New macro. (thread_list): Declare. * infrun.c (handle_inferior_event) <spurious signal>: Don't keep going, but instead fall through to the stepping handling. * linux-nat.c (resume_lwp): New parameter 'signo'. Resume with the passed in signal. Adjust debug output. (resume_callback): Rename to ... (linux_nat_resume_callback): ... this. Pass the thread's last stop signal, if in "pass" state. (linux_nat_resume): Adjust to rename. (stop_wait_callback): New assertion. Don't respawn signals; instead let the LWP remain with SIGNALLED set. (linux_nat_wait_1): Remove flushing of pending SIGSTOPs. * remote.c (append_pending_thread_resumptions): New. (remote_vcont_resume): Call it. * target.h (target_resume): Extend comment. gdb/testsuite/ 2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdb.threads/siginfo-threads.exp: New file. * gdb.threads/siginfo-threads.c: New file. * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file.	2012-06-28 16:34:04 +00:00
Jan Kratochvil	e2e4d78b22	gdb/ ... Remove stale dummy frames. * breakpoint.c: Include dummy-frame.h. (longjmp_breakpoint_ops): New variable. (update_breakpoints_after_exec, breakpoint_init_inferior): Delete also bp_longjmp_call_dummy. (bpstat_what, bptype_string, print_one_breakpoint_location) (init_bp_location): Support bp_longjmp_call_dummy. (set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why. (set_longjmp_breakpoint_for_call_dummy) (check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New functions. (initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops. * breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete FIXME comment and extend the other comment for bp_call_dummy. (set_longjmp_breakpoint_for_call_dummy) (check_longjmp_breakpoint_for_call_dummy): New declarations. * dummy-frame.c: Include gdbthread.h. (pop_dummy_frame_bpt): New function. (pop_dummy_frame): Call pop_dummy_frame_bpt. (dummy_frame_discard): New function. (cleanup_dummy_frames): Update the comment about longjmps. * dummy-frame.h (dummy_frame_discard): New declaration. * gdbthread.h (struct thread_info): Extend initiating_frame comment. * infcall.c (call_function_by_hand): New variable longjmp_b. Call set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT. * infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>: Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and keep_going if IS_LONGJMP and there is no other reason to stop. gdb/testsuite/ Remove stale dummy frames. * gdb.base/call-signal-resume.exp (maintenance print dummy-frames) (maintenance info breakpoints): New tests. * gdb.base/stale-infcall.c: New file. * gdb.base/stale-infcall.exp: New file.	2012-06-18 17:28:38 +00:00
Pedro Alves	2ea286498f	gdb/ ... 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout.	2012-05-24 16:39:15 +00:00
Joel Brobecker	0b30217134	Copyright year update in most files of the GDB Project. ... gdb/ChangeLog: Copyright year update in most files of the GDB Project.	2012-01-04 08:17:56 +00:00
Pedro Alves	305962315a	2011-09-13 Pedro Alves <pedro@codesourcery.com> ... * gdbthread.h (enum thread_state): Moved here. (struct thread_info): Rename `executing_' field to `executing' and `state_' to `state'. * thread.c (enum thread_state): Moved to gdbthread.h. (new_thread, add_thread_silent, delete_thread_1) (any_live_thread_of_process, thread_alive, set_running) (set_running, is_thread_state, any_running, is_executing) (set_executing, finish_thread_state, print_thread_info) (do_captured_thread_select): Adjust.	2011-09-13 14:48:55 +00:00
Yao Qi	ede1849f92	gdb/ ... * gdbthread.h (struct thread_info): Remove fields `stepping_through_solib_after_catch' and `stepping_through_solib_catchpoints'. * infrun.c (init_thread_stepping_state): Update. (process_event_stop_test, currently_stepping): Update. (currently_stepping_or_nexting_callback): Update.	2011-09-07 14:24:48 +00:00
Yao Qi	6aa27652a7	gdb/ ... * gdbthread.h (struct thread_info): Comment on field `step_after_step_resume_breakpoint'.	2011-09-07 13:36:47 +00:00
Marc Khouzam	9941e0c5c1	2011-04-19 Marc Khouzam <marc.khouzam@ericsson.com> ... * thread.c (any_live_thread_of_process): Prioritize threads that are not executing. * gdbthread.h (any_live_thread_of_process): Update comment as per above change.	2011-04-19 15:16:14 +00:00
Michael Snyder	aea5b2797c	2011-02-21 Michael Snyder <msnyder@vmware.com> ... * gdbthread.h (print_thread_info): Change prototype. * thread.c (print_thread_info): Accept char* instead of int for requested_threads argument. Use new function number_is_in_list to determine which threads to list. (info_threads_command): Pass char* to print_thread_info. * cli/cli-utils.c (number_is_in_list): New function. * cli/cli-utils.h (number_is_in_list): Export. * mi/mi-main.c (mi_cmd_thread_info): Pass char* to print_thread_info. (print_one_inferior): Ditto. (mi_cmd_list_thread_groups): Ditto. 2011-02-21 Michael Snyder <msnyder@vmware.com> * gdb.threads/thread-find.exp: Update patterns for changes in output of "info threads" command.	2011-02-21 23:40:47 +00:00
Tom Tromey	4694da0147	gdb ... PR mi/8618: * thread.c (free_thread): Free 'name'. (print_thread_info): Emit thread name. Change CLI output. (thread_name_command): New function. (do_captured_thread_select): Emit newline. (_initialize_thread): Register 'thread name' command. * target.h (struct target_ops) <to_thread_name>: New field. (target_thread_name): New macro. * target.c (update_current_target): Handle to_thread_name. * python/py-infthread.c (thpy_get_name): New function. (thpy_set_name): Likewise. (thread_object_getset): Add "name". * linux-nat.c (linux_nat_thread_name): New function. (linux_nat_add_target): Set to_thread_name. * gdbthread.h (struct thread_info) <name>: New field. gdb/doc * gdb.texinfo (Threads): Document thread name output and `thread name' command. (Threads In Python): Document Thread.name attribute. (GDB/MI Thread Commands): Document thread attributes. gdb/testsuite * gdb.python/py-infthread.exp: Add thread tests.	2011-01-19 17:21:39 +00:00
Michael Snyder	0963b4bd45	2011-01-07 Michael Snyder <msnyder@vmware.com> ... * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.	2011-01-07 19:36:19 +00:00
Joel Brobecker	7b6bb8daac	run copyright.sh for 2011.	2011-01-01 15:34:07 +00:00
Tom Tromey	186c406b19	gdb ... PR c++/9593: * thread.c (clear_thread_inferior_resources): Call delete_longjmp_breakpoint. * infrun.c (handle_inferior_event): Handle exception breakpoints. (handle_inferior_event): Likewise. (insert_exception_resume_breakpoint): New function. (check_exception_resume): Likewise. * inferior.h (delete_longjmp_breakpoint_cleanup): Declare. * infcmd.c (delete_longjmp_breakpoint_cleanup): No longer static. (step_1): Set thread's initiating frame. (until_next_continuation): New function. (until_next_command): Support exception breakpoints. (finish_command_continuation): Delete longjmp breakpoint. (finish_forward): Support exception breakpoints. * gdbthread.h (struct thread_info) <initiating_frame>: New field. * breakpoint.h (enum bptype) <bp_exception, bp_exception_resume, bp_exception_master>: New constants. (struct bpstat_what) <is_longjmp>: New field. (set_longjmp_breakpoint): Update. * breakpoint.c (create_exception_master_breakpoint): New function. (update_breakpoints_after_exec): Handle bp_exception_master. Call create_exception_master_breakpoint. (print_it_typical): Handle bp_exception_master, bp_exception. (bpstat_stop_status): Handle bp_exception_master. (bpstat_what): Handle bp_exception_master, bp_exception, bp_exception_resume. (bptype_string): Likewise. (print_one_breakpoint_location): Likewise. (allocate_bp_location): Likewise. (set_longjmp_breakpoint): Handle exception breakpoints. Change interface. (delete_longjmp_breakpoint): Handle exception breakpoints. (mention): Likewise. (struct until_break_command_continuation_args) <thread_num>: New field. (until_break_command_continuation): Call delete_longjmp_breakpoint. (until_break_command): Support exception breakpoints. (delete_command): Likewise. (breakpoint_re_set_one): Likewise. (breakpoint_re_set): Likewise. gdb/testuite * gdb.java/jnpe.java: New file. * gdb.java/jnpe.exp: New file. * gdb.cp/nextoverthrow.exp: New file. * gdb.cp/nextoverthrow.cc: New file.	2010-12-09 16:09:54 +00:00
Jan Kratochvil	8358c15c55	gdb/ ... Fix step_resume_breakpoint unsaved during an infcall. * gdbthread.h (struct thread_control_state): Move here field step_resume_breakpoint ... (struct thread_info): ... from here. * infrun.c (save_infcall_control_state): Reset control.step_resume_breakpoint to NULL. (restore_infcall_control_state, discard_infcall_control_state): Delete control.step_resume_breakpoint. * arm-linux-tdep.c, infrun.c, thread.c: Update all the references to the moved field. gdb/testsuite/ Fix step_resume_breakpoint unsaved during an infcall. * gdb.base/step-resume-infcall.exp: New file. * gdb.base/step-resume-infcall.c: New file.	2010-11-28 04:33:47 +00:00
Jan Kratochvil	16c381f058	gdb/ ... Rename and move inferior_thread_state and inferior_status. * gdbthread.h (struct thread_control_state): New struct, move fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step and stop_bpstat here from struct thread_info. (struct thread_suspend_state): New struct, move field stop_signal here from struct thread_info. (struct thread_info): Move the fields above from this struct. * inferior.h: Move the inferior_thread_state and inferior_status declarations comment to their definitions at infrun.c. (struct inferior_control_state): New struct, move field stop_soon from struct inferior here. (struct inferior_suspend_state): New empty struct. (struct inferior): New fields control and suspend. Move out field stop_soon. * infrun.c (struct inferior_thread_state): Rename to ... (infcall_suspend_state): ... here. Replace field stop_signal by fields thread_suspend and inferior_suspend. (save_inferior_thread_state): Rename to ... (save_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (restore_inferior_thread_state): Rename to ... (restore_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (do_restore_inferior_thread_state_cleanup): Rename to ... (do_restore_infcall_suspend_state_cleanup): ... here. (make_cleanup_restore_inferior_thread_state): Rename to ... (make_cleanup_restore_infcall_suspend_state): ... here. (discard_inferior_thread_state): Rename to ... (discard_infcall_suspend_state): ... here. (get_inferior_thread_state_regcache): Rename to ... (get_infcall_suspend_state_regcache): ... here. (struct inferior_status): Rename to ... (struct infcall_control_state): ... here. Replace fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step, stop_bpstat and stop_soon by fields thread_control and inferior_control. (save_inferior_status): Rename to ... (save_infcall_control_state): ... here. Update the code for new fields. (restore_inferior_status): Rename to ... (restore_infcall_control_state): ... here. Update the code for new fields. (do_restore_inferior_status_cleanup): Rename to ... (do_restore_infcall_control_state_cleanup): ... here. (make_cleanup_restore_inferior_status): Rename to ... (make_cleanup_restore_infcall_control_state): ... here. (discard_inferior_status): Rename to ... (discard_infcall_control_state): ... here. * alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h, exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c, inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c, mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c, solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the references to the moved fields and renamed functions.	2010-11-28 04:31:25 +00:00
Jan Kratochvil	a289b8f64e	gdb/ ... Revert: 2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <pedro@codesourcery.com> * gdbthread.h (currently_stepping): New declaration. * infrun.c (currently_stepping): Remove the forward declaration. (currently_stepping): Make it global. * linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New variables tp and step, initialized them. Pass STEP to to_resume. Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP. * remote.c (currently_stepping_callback): New. (remote_vcont_resume) <ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>: New variable tp. Call currently_stepping_callback and step such thread. gdb/testsuite/ Revert: 2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file.	2010-11-02 01:37:32 +00:00
Jan Kratochvil	8aeb23f364	gdb/ ... * gdbthread.h (currently_stepping): New declaration. * infrun.c (currently_stepping): Remove the forward declaration. (currently_stepping): Make it global. * linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New variables tp and step, initialized them. Pass STEP to to_resume. Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP. * remote.c (currently_stepping_callback): New. (remote_vcont_resume) <ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>: New variable tp. Call currently_stepping_callback and step such thread. gdb/testsuite/ * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file.	2010-10-17 18:24:47 +00:00
Vladimir Prus	dc146f7c09	Implement core awareness. ... * bcache.c (compare_ints): Remove (print_percentage): Use compare_positive_ints. * defs.h (compare_positive_ints): Declare. * linux-nat.h (struct lin_lwp): New field core. (linux_nat_core_of_thread_1): Declare. * linux-nat.c (add_lwp): Init the 'core' field. (linux_nat_wait_1): Record the core. (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New. (linux_nat_add_target): Register the above. * linux-thread-db.c (update_thread_core): New. (thread_db_find_new_threads): Update core information for every thread. * remote.c (struct private_thread_info): New. (free_private_thread_info, demand_private_info): New. (PACKET_qXfer_threads, use_osdata_threads): New. (struct thread_item, threads_parsing_context (start_thread, end_thread, thread_attributes) (thread_children, threads_children, threads_elements): New. (remote_threads_info): Try qXfer:threads before anything else. (remote_protocol_packets): Register qXfer:threads. (remote_open_1): Init use_osdata_threads. (struct stop_reply): New field 'core'. (remote_parse_stop_reply): Parse core number. (process_stop_reply): Record core number. (remote_xfer_partial): Handle qXfer:threads. (remote_core_of_thread): New. (init_remote_ops): Register remote_core_of_thread. (_initialize_remote): Register qXfer:read. * target.c (target_core_of_thread): New * target.h (enum target_object): New value TARGET_OBJECT_THREADS. (struct target_ops): New field to_core_of_threads. (target_core_of_thread): Declare. * gdbthread.h (struct thread_info): New field private_dtor. * thread.c (print_thread_info): Report the core. * ui-out.c (MAX_UI_OUT_LEVELS): Increase. * utils.c (compare_positive_ints): New. * features/threads.dtd: New. * mi/mi-interp.c (mi_on_normal_stop): Report the core. * mi/mi-main.c (struct collect_cores_data, collect_cores) (do_nothing, free_vector_of_osdata_items) (splay_tree_int_comparator, free_splay_tree): New. (print_one_inferior_data): Implemented printing of selected inferiors. Collect and print cores. (output_cores): New. (mi_cmd_list_thread_groups): Support --recurse. Permit specifying thread groups together with --available.	2010-01-12 21:40:25 +00:00
Joel Brobecker	4c38e0a4fc	Update copyright year in most headers. ... Automatic update by copyright.sh.	2010-01-01 07:32:07 +00:00
Pedro Alves	6c95b8df7f	2009-10-19 Pedro Alves <pedro@codesourcery.com> ... Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".	2009-10-19 09:51:43 +00:00
Pedro Alves	2277426b30	gdb/ ... 2009-07-02 Pedro Alves <pedro@codesourcery.com> * linux-nat.c (linux_child_follow_fork): If we're staying attached to the child process, enable event reporting on it. Don't handle checkpoints here. Instead, add the child fork to the lwp thread and inferior lists without clobbering the previous inferior. Let the thread_db layer learn about a new child process, even if following the parent. (linux_nat_switch_fork): Delete lwps of the current inferior only, instead of clearing the whole list. Use thread_change_ptid to give the core the illusion the new checkpoint is still the same inferior. Clear the register cache. (linux_handle_extended_wait): Handle checkpoints here. (linux_multi_process): Turn on. * linux-fork.c (struct fork_info) <pc>: Remove field. (init_fork_list): Do not delete the checkpoint from the inferior list (it is not there). (fork_load_infrun_state): Don't switch inferior_ptid here. Pass the new checkpoint's ptid to linux_nat_switch_fork. (fork_save_infrun_state): Make static. Don't stop the pc field of fork_info, it's gone. (linux_fork_mourn_inferior): Don't delete the checkpoint from the inferior list, it's not there. (linux_fork_detach): Ditto. (delete_fork_command): Replace mention of fork/checkpoint by checkpoint only. (detach_fork_command): Likewise. Don't delete the checkpoint from the inferior list. (info_forks_command): Adjust. (restore_detach_fork): Delete. (checkpointing_pid): New. (linux_fork_checkpointing_p): New. (save_detach_fork): Delete. (checkpoint_command): Delete temp_detach_fork. Don't remove breakpoints, that's a nop. Store the pid of the process we're checkpointing, and use make_cleanup_restore_integer to restore it. Don't reinsert breakpoints here. (process_command, fork_command): Delete. (restart_command): Update comments to only mention checkpoints, not forks. (_initialize_linux_fork): Delete "fork", "process", "info forks" commands. * linux-fork.h (fork_save_infrun_state, fork_list): Delete declarations. (linux_fork_checkpointing_p): Declare. * cli/cli-cmds.c (killlist): New. * cli/cli-cmds.h (killlist): Declare. * gdbcmd.h (killlist): Declare. * inferior.c: Include "gdbthread.h". (detach_inferior_command, kill_inferior_command) (inferior_command): New. (info_inferiors_command): Allow specifying a specific inferior id. (_initialize_inferiors): Register "inferior", "kill inferior" and "detach inferior" commands. * infcmd.c (_initialize_infcmd): Make "kill" a prefix command. * gdbthread.h (any_thread_of_process): Declare. * thread.c (any_thread_of_process): New. * NEWS: Mention multi-inferior debugging. Mention 'info inferiors', 'inferior', 'detach inferior' and 'kill inferior' as new commands. (Removed commands): New section, mentioning that 'info forks', 'fork', 'process', 'delete fork' and 'detach fork' are now gone. gdb/testsuite/ 2009-07-02 Pedro Alves <pedro@codesourcery.com> * gdb.base/multi-forks.exp: Only run detach-on-fork tests on linux. Adjust to use "inferior", "info inferiors", "detach inferior" and "kill inferior" instead of "restart", "info fork", "detach fork" and "delete fork". * gdb.base/ending-run.exp: Spell out "info". * gdb.base/help.exp: Adjust to use test_prefix_command_help for the "kill" command. gdb/doc/ 2009-07-02 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Debugging multiple inferiors): Document the "inferior", "detach inferior" and "kill inferior" commands. (Debugging Programs with Multiple Processes): Adjust to mention generic "inferior" commands. Delete mention of "detach fork" and "delete fork". Cross reference to "Debugging multiple inferiors" section.	2009-07-02 21:57:28 +00:00
Daniel Jacobowitz	edb3359dff	gdb/ ... * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.	2009-06-28 00:20:24 +00:00
Doug Evans	e09875d410	gdb: ... Global renaming of find_thread_pid to find_thread_ptid. * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid. * thread.c (find_thread_ptid): Renamed from find_thread_pid. All callers updated. gdbserver: Global renaming of find_thread_pid to find_thread_ptid. * server.h (find_thread_ptid): Renamed from find_thread_pid. * inferiors.c (find_thread_ptid): Renamed from find_thread_pid. All callers updated.	2009-05-24 21:06:53 +00:00
Pedro Alves	e58b0e63bb	gdb/ ... * gdbthread.h (struct thread_info): New `pending_follow' field. * thread.c (new_thread): New function. (add_thread_silent): Use it. * breakpoint.c (internal_breakpoint_number): New global, moved from inside... (create_internal_breakpoint): ... this. (clone_momentary_breakpoint): New. * breakpoint.h (clone_momentary_breakpoint): Declare. * infrun.c (nullify_last_target_wait_ptid): Move declaration higher. (pending_follow): Delete. (follow_fork): Handle pending follow fork event here. Moved the preserving of thread stepping state here. (resume): Don't handle pending follow fork events here. Only install the inferior's terminal modes if we're about to resume it. (proceed): Handle possible pending follow fork events here. (init_wait_for_inferior): No need to clear pending_follow anymore, it's gone. (handle_inferior_event): Adjust to per-thread `pending_follow'. Call `follow_fork' to handle following the fork. If the follow-fork is cancelled, stop stepping. * linux-nat.c (linux_child_follow_fork): Adjust to per-thread `pending_follow' events. Remove code that handled preserving the thread stepping state. * inf-ptrace.c (inf_ptrace_follow_fork): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork): Ditto. gdb/testsuite/ * gdb.threads/fork-thread-pending.c: New. * gdb.threads/fork-thread-pending.exp: New.	2009-05-24 18:00:08 +00:00
Pedro Alves	bad34192e5	* remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check ... if the thread's ptid without a thread id field is in the list before calling thread_change_ptid. (extended_remote_attach_1): In non-stop mode, do not rely on querying the current thread, instead, query the thread list, and select the first thread of the process. * gdbthread.h (first_thread_of_process): Declare. * thread.c (first_thread_of_process): Define.	2009-03-31 15:23:57 +00:00
Pedro Alves	c5a4d20bb9	* gdbthread.h (struct thread_info): Add in_infcall member. ... * infcall.c (run_inferior_call): Save, set and restore in_infcall. Remove reverences to suppress_resume_observer. Refresh `call_thread' after returning from `proceed'. * infcmd.c (suppress_resume_observer): Delete. * inferior.h (suppress_resume_observer): Delete declaration. * mi/mi-interp.c (mi_on_resume): Suppress output while calling an inferior function. * thread.c (set_running): Remove references to suppress_resume_observer. * infrun.c (struct inferior_status): Add in_infcall member. (save_inferior_status): Save it. (restore_inferior_status): Restore it.	2009-03-22 17:59:59 +00:00
Pedro Alves	29f49a6a4f	PR gdb/9747: ... * gdbthread.h (finish_thread_state, finish_thread_state_cleanup): Declare. * thread.c (finish_thread_state, finish_thread_state_cleanup): New. * infrun.c (wait_for_inferior, fetch_inferior_event): If an error is thrown while handling an event, finish the thread state. (normal_stop): Use finish_thread_state cleanup. * infcmd.c (run_command_1): If an error is thrown while starting the inferior, finish the thread state.	2009-01-18 17:42:16 +00:00
Joel Brobecker	0fb0cc7590	Updated copyright notices for most files.	2009-01-03 05:58:08 +00:00
Vladimir Prus	3ee1c036ac	Implement -list-thread-groups. ... * thread.c (print_thread_info): New parameter pid, to print threads of specific process. * gdbthread.h (print_thread_info): New parameter pid. * mi/mi-cmds.c (mi_cmds): Register -list-thread-groups. * mi/mi-cmds.h (mi_cmd_list_thread_groups): New. * mi/mi-main.c (mi_cmd_thread_info): Adjust. (print_one_process, mi_cmd_list_thread_groups): New.	2008-11-17 12:13:49 +00:00
Pedro Alves	252fbfc86a	gdb/ ... 2008-10-23 Pedro Alves <pedro@codesourcery.com> * defs.h: Mention ptid_is_pid. * inferior.h (ptid_is_pid): Declare. * gdbthread.h (struct thread_info) <stop_requested>: New field. (set_stop_requested): Declare. * infcmd.c (interrupt_target_1): Call set_stop_requested. * infrun.c (clear_proceed_status): Clear stop_requested. (infrun_thread_stop_requested_callback, infrun_thread_stop_requested): New. (handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a thread that had an explicit stop request, pretend we got a TARGET_SIGNAL_0. Always stop if the thread had an explicit stop request. (print_stop_reason): In the SIGNAL_RECEIVED case, if we're not outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped", instead of mentioning signal 0. (ptid_is_pid): New. * thread.c (set_stop_requested): New. * linux-nat.c (queued_waitpid): Rename to ... (queued_waitpid_1): ... this. Add `peek' argument. Handle it. (queued_waitpid): New, as wrapper to queued_waitpid_1. (push_waitpid): Push the SIGTRAP to the local event queue, to the kernel's. (send_sigint_callback): Delete. (linux_nat_stop_lwp): New. (linux_nat_stop): Use it. gdb/doc/ 2008-10-23 Pedro Alves <pedro@codesourcery.com> * observer.texi (thread_stop_requested): New. gdb/testsuite/ 2008-10-23 Pedro Alves <pedro@codesourcery.com> * lib/mi-support.exp (mi_expect_interrupt): Expect signal 0 instead of SIGINT.	2008-10-23 23:11:21 +00:00
Pedro Alves	dcf4fbde10	* inferior.h (context_switch_to): Delete. ... * infrun.c (context_switch): Don't save and load infrun state. (context_switch_to): Delete. * infcmd.c (proceed_thread_callback): Replace context_switch_to calls by switch_to_thread calls. * gdbthread.h (save_infrun_state, load_infrun_state): Delete. * thread.c (main_thread_state, main_thread_executing): Delete. (inferior_thread): Delete references to them. (add_thread_silent): Fix case where we're adding a thread with the same ptid as an exited thread. Remove references to context-switching. (load_infrun_state, save_infrun_state): Delete. (thread_alive, is_thread_state, any_running, is_executing) (set_executing): Remove the special handling for targets that don't register any thread. (restore_current_thread, thread_apply_all_command) (do_captured_thread_select): Unconditionally call switch_to_thread. * mi/mi-main.c (mi_cmd_execute): Check for exited threads. Call switch_to_thread instead of context_switch_to.	2008-09-08 22:10:20 +00:00
Pedro Alves	95e54da724	Remove global continuations in favour of a per-thread ... continuations. * gdbthread.h (struct thread_info): Add comments around continuations and intermediate_continuations. (save_infrun_state, load_infrun_state): Delete continuations and intermediate_continuations arguments. * infrun.c (fetch_inferior_event): Only call normal_stop if stop_soon is NO_STOP_QUIETLY. (context_switch): Don't context-switch the continuations. * thread.c (clear_thread_inferior_resources): Discard all continuations of the thread we're clearing. (save_infrun_state, load_infrun_state): Delete continuations and intermediate_continuations arguments, and the code referencing them. * utils.c: Include "gdbthread.h". (cmd_continuation, intermediate_continuation): Delete. (add_continuation): Add thread_info* argument. Install the continuation on it. (restore_thread_cleanup): New. (do_all_continuations_ptid, do_all_continuations_thread_callback): New. (do_all_continuations): Reimplement. (discard_all_continuations_thread_callback, discard_all_continuations_thread): New. (discard_all_continuations): Reimplement. (add_intermediate_continuation): Add thread_info* argument. Install the continuation on it. (do_all_intermediate_continuations_thread_callback) (do_all_intermediate_continuations_thread): New. (do_all_intermediate_continuations): Reimplement. (discard_all_intermediate_continuations_thread_callback): New. (discard_all_intermediate_continuations_thread): New. (discard_all_intermediate_continuations): Reimplement. * breakpoint.c (until_break_command): Install the continuation on the current thread. * defs.h (cmd_continuation, intermediate_continuation): Delete. (struct thread_info): Forward declare. (add_continuation, add_intermediate_continuation): Add thread_info* argument. (do_all_continuations_thread, discard_all_continuations_thread) (do_all_intermediate_continuations_thread) (discard_all_intermediate_continuations_thread): Declare. * inf-loop.c (inferior_event_handler): In non-stop only run continuations on the thread that stopped. In all-stop, run continuations on all threads. * infcmd.c (step_once, finish_command): Adjust.	2008-09-08 21:57:42 +00:00
Pedro Alves	414c69f7a7	Remove the global stop_step in favour of a per-thread ... stop_step. * inferior.h (stop_step): Delete. * gdbthread.h (struct thread_info): Add comments to stop_step. (save_infrun_state, load_infrun_state): Remove stop_step argument. * thread.c (load_infrun_state, save_infrun_state): Remove stop_step argument, and references to it. * infrun.c (clear_proceed_status): Clear stop_step. (fetch_inferior_event): Adjust. (context_switch): Don't context-switch stop_step. (handle_inferior_event): Adjust. (normal_stop): Adjust. (save_inferior_status, restore_inferior_status): Adjust. * infcmd.c (stop_step): Delete. (step_1, step_1_continuation, step_once, until_next_command): Adjust.	2008-09-08 21:55:16 +00:00
Pedro Alves	af679fd003	Remove the global step_multi in favour of a per-thread ... step_multi. * inferior.h (step_multi): Delete. * gdbthread.h (struct thread_info): Add comments around step_multi. (save_infrun_state, load_infrun_state): Remove step_multi parameter. * thread.c (load_infrun_state, save_infrun_state): Remove step_multi argument, and references to it. * infcmd.c (step_multi): Delete. (step_1): Adjust. (step_1_continuation, until_next_command): Adjust. * infrun.c (fetch_inferior_event): Adjust. (context_switch): Don't context-switch step_multi. (print_stop_reason, normal_stop): Adjust.	2008-09-08 21:52:25 +00:00
Pedro Alves	2020b7abd8	Remove the global stop_signal in favour of a per-thread ... stop_signal. * inferior.h (stop_signal): Delete. * gdbthread.h (save_infrun_state, load_infrun_state): Remove stop_signal argument. * thread.c (load_infrun_state, save_infrun_state): Remove stop_signal argument. Don't reference it. * infcmd.c (stop_signal): Delete. (program_info): Adjust. * infrun.c (resume): Clear stop_signal. (proceed): Adjust. Pass the last stop_signal to the thread we're resuming. (context_switch): Don't context-switch stop_signal. (handle_inferior_event, keep_going): Adjust. (save_inferior_status, restore_inferior_status): Adjust. * fbsd-nat.c: Include "gdbthread.h". (find_signalled_thread, find_stop_signal): New. (fbsd_make_corefile_notes): Use it. * fork-child.c (startup_inferior): Adjust. * linux-nat.c (get_pending_status): Adjust. (linux_nat_do_thread_registers): Adjust. (find_signalled_thread, find_stop_signal): New. (linux_nat_do_thread_registers): Add stop_signal parameter. (struct linux_nat_corefile_thread_data): Add stop_signal member. (linux_nat_corefile_thread_callback): Pass stop_signal. (linux_nat_do_registers): Delete. (linux_nat_make_corefile_notes): Use find_stop_signal. Assume there's always a thread. * procfs.c (find_signalled_thread, find_stop_signal): New. (find_stop_signal): New. (procfs_do_thread_registers): Add stop_signal parameter. (struct procfs_corefile_thread_data): Add stop_signal member. (procfs_corefile_thread_callback): Pass args->stop_signal. (procfs_make_note_section): Find the last stop_signal. * solib-irix.c: Include gdbthread.h. (irix_solib_create_inferior_hook): Adjust. * solib-osf.c: Include gdbthread.h. (osf_solib_create_inferior_hook): Adjust. * solib-sunos.c: Include gdbthread.h. (sunos_solib_create_inferior_hook): Adjust. * solib-svr4.c: Include gdbthread.h. (svr4_solib_create_inferior_hook): Adjust. * win32-nat.c (do_initial_win32_stuff): Adjust.	2008-09-08 21:51:18 +00:00
Pedro Alves	32400bebb2	* gdbthread.h (struct thread_info): Add comments around ... proceed_to_finish. (save_infrun_state, load_infrun_state): Remove proceed_to_finish argument. * thread.c (load_infrun_state, save_infrun_state): Delete proceed_to_finish argument and references to it. * infcall.c (call_function_by_hand): Adjust. * infcmd.c (finish_command): Adjust. * infrun.c (proceed_to_finish): Delete. (clear_proceed_status): Adjust. (context_switch): Don't context-switch proceed_to_finish. (normal_stop, save_inferior_status, restore_inferior_status): Adjust.	2008-09-08 21:48:52 +00:00
Pedro Alves	347bddb745	* inferior.h (stop_bpstat): Delete. ... * breakpoint.h (bpstat_do_actions): Remove bpstat* argument. * breakpoint.c (bpstat_do_actions): Rename to ... (bpstat_do_actions_1): ... this. Make static. Change return type to int. Return true if a breakpoint proceeded. (bpstat_do_actions): New, as wrapper around bpstat_do_actions_1. (delete_breakpoint): Don't reference the global stop_bpstat; it's gone. * gdbthread.h (struct thread_info): Add stop_bpstat. (save_infrun_state, load_infrun_state): Remove stop_bpstat argument. * thread.c (load_infrun_state, save_infrun_state): Remove stop_bpstat argument, and the code referencing it. * infcall.c: Include "gdbthread.h". (call_function_by_hand): Adjust. * exceptions.c: Include "gdbthread.h". (throw_exception): Adjust. * infcmd.c (stop_bpstat): Delete. (continue_command): In all-stop, set the ignore count on the thread that reported the stop. In non-stop, set it on the current thread. (finish_command_continuation): Adjust. (program_info): Adjust. * infrun.c (clear_proceed_status): Adjust. (context_switch): Don't context-switch stop_bpstat. (handle_inferior_event): Adjust. (normal_stop): Adjust. (save_inferior_status, restore_inferior_status): Adjust. * inf-loop.c (inferior_event_handler): Remove parameter to bpstat_do_actions call. * top.c (command_loop): Remove parameter to bpstat_do_actions call. Call it unconditionally. * event-top.c (command_handler): Ditto. * python/python.c (execute_gdb_command): Ditto.	2008-09-08 21:46:21 +00:00
Pedro Alves	078130d0ca	* inferior.h (step_over_calls): Delete. ... * gdbthread.h (save_infrun_state, load_infrun_state): Remove step_over_calls argument. * thread.c (save_infrun_state, load_infrun_state): Remove step_over_calls argument. Adjust. * infcmd.c (step_over_calls): Delete. (step_1): Adjust. * infrun.c (clear_proceed_status): Adjust. (context_switch): Don't context-switch step_over_calls. (handle_inferior_event, save_inferior_status) (restore_inferior_status): Adjust.	2008-09-08 21:43:00 +00:00
Pedro Alves	4e1c45eac7	Remove context switching in favour of accessing thread_info fields ... directly. * infrun.c (stepping_over_breakpoint, step_resume_breakpoint): Delete. (struct thread_stepping_state): Delete. (gtss, tss): Delete. (follow_inferior_reset_breakpoints, follow_exec) (resume, clear_proceed_status): Adjust. (prev_pc): Delete. (proceed, start_remote, init_wait_for_inferior): Adjust. (struct execution_control_state): Add event_thread member. (delete_step_resume_breakpoint_callback) (delete_step_thread_step_resume_breakpoint) (delete_step_thread_step_resume_breakpoint_cleanup) (delete_step_thread_step_resume_breakpoint): New. (wait_for_inferior, init_execution_control_state): Use delete_step_thread_step_resume_breakpoint_cleanup. (wait_for_inferior): Set the event_thread. (fetch_inferior_event): Ditto. Delete the step-resume breakpoint with delete_step_thread_step_resume_breakpoint. (init_thread_stepping_state): Change parameter type to thread_info. Adjust. (context_switch): Don't context switch prev_pc, stepping_over_breakpoint, step_resume_breakpoint, step_range_start, step_range_end, step_frame_id, tss->stepping_over_breakpoint, tss->stepping_through_solib_after_catch, tss->stepping_through_solib_catchpoints, tss->current_line, or tss->current_symtab. (adjust_pc_after_break, handle_inferior_event) (currently_stepping, step_into_function) (insert_step_resume_breakpoint_at_sal) (insert_longjmp_resume_breakpoint, keep_going): Adjust. (clear_stepping_state): New. (normal_stop): Adjust. (save_inferior_status, restore_inferior_status): Adjust. * gdbthread.h (struct thread_info): Comments describing the members moved here. Add step_after_step_resume_breakpoint. (delete_step_resume_breakpoint): Add thread_info argument. (save_infrun_state, load_infrun_state): Remove prev_pc, trap_expected, step_resume_breakpoint, step_range_start, step_range_end, step_frame_id, another_trap, stepping_through_solib_after_catch, stepping_through_solib_catchpoints, current_line and current_symtab function arguments. (inferior_thread): Declare. * thread.c (inferior_thread): New. (delete_step_resume_breakpoint): Add a thread_info parameter and rewrite. (load_infrun_state, save_infrun_state): Remove prev_pc, trap_expected, step_resume_breakpoint, step_range_start, step_range_end, step_frame_id, stepping_over_breakpoint, stepping_through_solib_after_catch, stepping_through_solib_catchpoints, current_line and current_symtab args. Remove code referencing them. * infcmd.c (step_range_start, step_range_end, step_frame_id): Delete. (step_1, step_once, until_next_command): Adjust. * inferior.h (step_range_start, step_range_end, step_frame_id): Delete. * linux-nat.c (linux_child_follow_fork): If following the child, move the step state to it. Adjust. * inf-ptrace.c (inf_ptrace_follow_fork): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.	2008-09-08 21:40:39 +00:00
Pedro Alves	5231c1fd73	2008-08-18 Pedro Alves <pedro@codesourcery.com> ... gdb/doc/ * observer.texi (thread_ptid_changed): New. gdb/ * gdbthread.h (thread_change_ptid): Declare. * infrun.c (infrun_thread_ptid_changed): New. (_initialize_infrun): Attach infrun_thread_ptid_changed to the thread_ptid_changed observer. * regcache.c (regcache_thread_ptid_changed): New. (_initialize_regcache): Attach regcache_thread_ptid_changed to the thread_ptid_changed observer. * thread.c (thread_change_ptid): New.	2008-08-18 22:35:17 +00:00
Pedro Alves	0d6431e255	* gdbthread.h: Add comments. ... * stack.c (get_selected_block): Return 0 on an exited thread. * top.c (execute_command): Check for is_stopped, not !is_running. * event-top.c (command_handler): Likewise.	2008-08-16 23:51:14 +00:00
Vladimir Prus	1e92afda99	Implement --thread and --frame. ... * gdbthread.h (find_thread_id): Declare. * thread.c (find_thread_id): Make non-static. * mi/mi-main.c (mi_cmd_execute): Switch to the right thread and frame, if necessary. * mi/mi-parse.c (mi_parse): Handle --thread and --frame. * mi/mi-parse.h (strcut mi_parse): New fields thread and frame.	2008-07-12 16:37:57 +00:00
Pedro Alves	4f8d22e3b4	Exited threads. ... * thread.c (enum thread_state): New. (thread_state main_thread_running): Delete, in favor of... (thread_state main_thread_state): ... this. Update throughout. (clear_thread_inferior_resources): New, split from free_thread. (free_thread): Call clear_thread_inferior_resources. (init_thread_list): Set main thread to stopped state. (add_thread_silent): Take care of PTID reuses. (delete_thread): If deleting inferior_ptid or a thread with refcount > 0, mark it as exited, but still keep it in the list. Only notify of thread exits, if we haven't done so yet. (iterate_over_threads): Make it safe to delete threads while iterating over them. (do_captured_list_thread_ids): Don't account for exited threads. (thread_alive): Check for the THREAD_EXITED state, and don't set ptid to -1 on exited threads. (set_running): Update to account for extra possible states. (is_thread_state): New. (is_stopped, is_exited): New. (is_running): Implement in terms of is_thread_state. (any_running): Update. (print_thread_info): Update. Account for exited threads. Don't warn about missed frame restoring here, its done in the cleanup. (switch_to_thread): Don't read from a thread that has gone. (restore_current_thread): In non-stop mode, do a full context switch. (restore_selected_frame): Add a frame_level argument. Rewrite. (struct current_thread_cleanup): Add selected_frame_level and was_stopped members. (do_restore_current_thread_cleanup): Check if thread was stopped and still is, and if the target has registers, stack and memory before restoring the selected frame. Don't delete the cleanup argument here. (restore_current_thread_cleanup_dtor): New. (make_cleanup_restore_current_thread): Remove all arguments. Rewrite. (thread_apply_all_command): Update. Prune threads. (thread_apply_command): Update. (thread_command): Account for currently selected exited thread. (do_captured_thread_select): Check for a running thread. Prune threads. (_initialize_thread): Make "info threads", "thread", "thread apply", and "thread apply all" appliable without a selected thread. * gdbthread.h (struct thread_info): Replace running_ by state_. Add refcount. (is_exited, is_stopped): Declare. (make_cleanup_restore_current_thread): Remove all arguments. * infrun.c: Include "event-top.h". (fetch_inferior_event): In non-stop mode, restore selected thread and frame after handling the event and running breakpoint commands. Display GDB prompt if needed. (normal_stop): In non-stop mode, don't print thread switching notice. * cli/cli-decode.c (set_cmd_no_selected_thread_ok) (get_cmd_no_selected_thread_ok): New. * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New. (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok): Declare. * cli/cli-cmds.c: Set "pwd", "help", "info", "show" as no-selected-thread ok. * top.c (execute_command): Check for non no-selected-thread-ok commands. * linux-nat.c (struct saved_ptids, threads_to_delete) (record_dead_thread, prune_lwps): Delete. (exit_lwp): Unconditionally delete thread. (linux_nat_resume): Remove prune_lwps call. * infcmd.c (proceed_thread_callback): Check if !is_stopped instead of is_running. Adjust to make_cleanup_restore_current_thread interface change. * mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the selected thread has exited. * inf-loop.c (inferior_event_handler): Don't display the prompt here. * varobj.c (c_value_of_root): Update. * defs.h (make_cleanup_dtor): Declare. * utils.c (make_cleanup_dtor): New. * Makefile.in (infrun.o): Depend on $(event_top_h).	2008-07-11 11:07:39 +00:00
Pedro Alves	a474d7c2a3	Per-thread commands. ... * gdbthread.h: Remove unneeded forward declarations. Include "inferior.h". (struct thread_info): Add continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi and stop_signal members. (save_infrun_state): Add continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi, stop_signal and stop_bpstat parameters. (load_infrun_state): Add continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi, stop_signal and stop_bpstat parameters. * thread.c (load_infrun_state): In non-stop mode, load continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi and stop_signal. (save_infrun_state): Store continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi, stop_signal and stop_bpstat. (save_infrun_state): Store continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi, stop_signal and stop_bpstat. (free_thread): Clear The thread's stop_bpstat. * inferior.h (context_switch_to): Declare. * infrun.c (ecss): New global. (context_switch): Context switch continuations, intermediate_continuations, proceed_to_finish, step_over_calls, stop_step, step_multi, stop_signal and stop_bpstat. (wait_for_inferior): Use global ecss. (async_ecss, async_ecs): Delete. (fetch_inferior_event): Use global ecss. (context_switch_to): New. * top.c (execute_command): In non-stop, only check if the current thread is running, in all-stop, check if there's any thread running. * breakpoint.c (bpstat_remove_breakpoint): New. (bpstat_remove_breakpoint_callback): New. (delete_breakpoint): Clear the stop_bpstats of all threads. * mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the current thread is running, in all-stop, check if there's any thread running. * Makefile.in (gdbthread_h): Depend on $(inferior_h).	2008-07-09 22:30:46 +00:00
Pedro Alves	8ea051c51f	Add "executing" property to threads. ... * inferior.h (target_executing): Delete. * gdbthread.h (struct thread_info): Add executing_ field. (set_executing, is_executing): New. * thread.c (main_thread_executing): New. (init_thread_list): Clear it and also main_thread_running. (is_running): Return false if target has no execution. (any_running, is_executing, set_executing): New. * top.c: Include "gdbthread.h". (target_executing): Delete. (execute_command): Replace target_executing check by any_running. * event-top.c: Include "gdbthread.h". (display_gdb_prompt, command_handler): Replace target_executing by is_running. * inf-loop.c: Include "gdbthread.h". Don't mark as not executing here. Replace target_executing by is_running. * infrun.c (handle_inferior_event): Mark all threads as not-executing. * linux-nat.c (linux_nat_resume): Don't mark thread as executing here. * stack.c (get_selected_block): Return null if inferior is executing. * target.c (target_resume): Mark resumed ptid as executing. * breakpoint.c (until_break_command): Replace target_executing check by is_executing. * remote.c (remote_async_resume): Don't mark inferior as executing here. * mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing by any_running. * mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute) (mi_execute_async_cli_command): Replace target_executing by is_running. * frame.c (get_current_frame): Error out if the current thread is executing. (has_stack_frames): New. (get_selected_frame, deprecated_safe_get_selected_frame): Check has_stack_frames. * Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on $(gdbthread_h).	2008-07-09 22:16:15 +00:00
Pedro Alves	5e0b29c16a	* monitor (monitor_ptid): New global. ... (monitor_open): Silently add the main task to GDB's thread list. (monitor_close, monitor_mourn_inferior): Silently delete the main task from GDB's thread list. (monitor_thread_alive, monitor_pid_to_str): New. (init_base_monitor_ops): Register monitor_thread_alive and monitor_pid_to_str. (_initialize_remote_monitors): Initialize monitor_ptid. * gdbthread.h (delete_thread_silent): Declare. * thread.c (delete_thread): Rename to ... (delete_thread_1): ... this. Add "silent" parameter. If silent, don't do exit notifications. (delete_thread, delete_thread_silent): New, as wrappers to delete_thread_1.	2008-07-09 10:58:41 +00:00
Vladimir Prus	20874c92f8	* breakpoint.c (moribund_locations): New. ... (bpstat_stop_status): Process moribund locations. (update_global_location_list): Add removed locations to moribund_locations. (breakpoint_retire_moribund): New. * breakpoint.h (struct bp_location): New field events_till_retirement. (breakpoint_retire_moribund): Declare. * thread.c (thread_count): New. * infrun.c (handle_inferior_event): Call breakpoint_retire_moribund. * gdbthread.h (thread_count): Declare.	2008-06-28 09:42:15 +00:00
Vladimir Prus	e1ac332873	Implement *running. ... * Makefile.in: Update dependencies. * gdbthread.h (struct thread_info): New field running_. (set_running, is_running): New. * thread.c (set_running, is_running): New. * inferior.h (suppress_normal_stop_observer): Rename to... (suppress_run_stop_observers): ..this. * infcmd.c (suppress_normal_stop_observer): Rename to... (suppress_run_stop_observers): ..this. (finish_command_continuation, finish_command): Adjust. * infcall.c (call_function_by_hand): Adjust. * infrun.c (normal_stop): Call set_running. * target.c (target_resume): New. Call set_running. * target.h (target_resume): Convert from macro to a function. * mi/mi-interp.c (mi_on_resume): New. (mi_interpreter_init): Register mi_on_resume.	2008-06-10 10:23:54 +00:00
Pedro Alves	611c83ae47	gdb/ ... * breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp and bp_longjmp_resume breakpoints. (breakpoint_address_is_meaningful): Claim bp_longjmp_resume as meaningful. (create_longjmp_breakpoint): Don't create bp_longjmp_resume breakpoints. Create bp_longjmp breakpoints as momentary breakpoints. (enable_longjmp_breakpoint): Delete. (set_longjmp_breakpoint): New. (disable_longjmp_breakpoint): Delete. (delete_longjmp_breakpoint): New. (set_longjmp_resume_breakpoint): Delete. (set_momentary_breakpoint_at_pc): New. (breakpoint_re_set_one): Don't delete bp_longjmp and bp_longjmp_resume breakpoints. (breakpoint_re_set): Don't create longjmp and longjmp-resume breakpoints. * infrun.c (step_resume_breakpoint): Add comment. (struct execution_control_state): Delete handling_longjmp member. (init_execution_control_state). Don't clear handling_longjmp. (context_switch): Don't context switch handling_longjmp. (handle_inferior_event): If handling a bp_longjmp breakpoint, create a bp_longjmp_resume breakpoint, and set it as current step_resume_breakpoint, then step over the longjmp breakpoint. If handling a bp_longjmp_resume breakpoint, don't delete the longjmp breakpoint, delete the longjmp-resume breakpoint, and stop stepping. (currently_stepping): Remove handling_longjmp from expression. (insert_step_resume_breakpoint_at_sal): Update comment. (insert_longjmp_resume_breakpoint): New. * breakpoint.h (set_momentary_breakpoint_at_pc): Declare. (enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete declarations. (set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare. (set_longjmp_resume_breakpoint): Delete declaration. * gdbthread.h (save_infrun_state): Remove handling_longjmp parameter. (load_infrun_state): Delete *handling_longjmp parameter. * thread.c (save_infrun_state): Remove handling_longjmp parameter. Update body. (load_infrun_state): Delete *handling_longjmp parameter. Update body. * infcmd.c (disable_longjmp_breakpoint_cleanup): Delete. (delete_longjmp_breakpoint_cleanup): New. (step_1): Call set_longjmp_breakpoint instead of enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup instead of disable_longjmp_breakpoint_cleanup when making cleanup. (step_1_continuation): Pass thread id in the continuation args to step_once. (step_once): Add thread parameter. Pass thread id the the continuation. gdb/testsuite/ * gdb.cp/annota2.exp: Adjust to breakpoints invalidations at different times.	2008-05-04 19:39:00 +00:00
Vladimir Prus	6208b47d6c	* thread.c (make_cleanup_restore_current_thread): Make it ... globally visible. * gdbthread.h (make_cleanup_restore_current_thread): Declare. * varobj.c (varobj_update): Don't save/restore frame. (c_value_of_root): Save/restore thread and frame here, using make_cleanup_restore_current_thread. * Makefile.in: Update dependecies.	2008-03-23 09:53:52 +00:00
Daniel Jacobowitz	17faa917e0	2008-03-21 Daniel Jacobowitz <dan@codesourcery.com> ... * gdbthread.h (add_thread_with_info): New. * linux-thread-db.c: Add some documentation. (GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete. (struct private_thread_info): Remove th_valid and ti_valid. Replace ti with tid. (thread_get_info_callback): Do not add TID to the new ptid. Do not cache th or ti. (thread_db_map_id2thr, lwp_from_thread): Delete functions. (thread_from_lwp): Assert that the LWP is set. Do not add TID to the new PTID. (attach_thread): Handle an already-existing thread. Use add_thread_with_info. Cache the th and tid. (detach_thread): Verify that private was set. Remove verbose argument and printing. Update caller. (thread_db_detach): Do not adjust inferior_ptid. (clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete. (check_event, find_new_threads_callback): Do not add TID to the new PTID. (thread_db_wait): Do not use lwp_from_thread. (thread_db_pid_to_str): Use the cached TID. (thread_db_extra_thread_info): Check that private is set. (same_ptid_callback): Delete. (thread_db_get_thread_local_address): Do not use it or check is_thread. Check that private is set. Assume that the thread handle is already cached. (init_thread_db_ops): Remove to_resume and to_kill. * thread.c (add_thread_with_info): New. (add_thread): Use it. * linux-nat.c (find_thread_from_lwp): Delete. (exit_lwp): Do not use it. Check print_thread_events. Print before deleting the thread. (GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to... * linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here. * inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and printf_unfiltered for thread exits. * procfs.c (procfs_wait): Likewise. 2008-03-21 Pedro Alves <pedro@codesourcery.com> * gdb.threads/fork-child-threads.exp: Test next over fork.	2008-03-21 15:44:53 +00:00
Vladimir Prus	8e8901c5c2	Implement -thread-info. ... * gdbthread.h (print_thread_info): Declare. * thread.c (print_thread_info): New, extracted from info_threads_command and adjusted to work for CLI and MI. (info_threads_command): Use print_thread_info. * Makefile.in: Update dependencies. * mi/mi-cmds.c (mi_cmds): Specify a handler for -thread-info. * mi/mi-cmds.h (mi_cmd_thread_info): Declare. * mi/mi-main.c (mi_cmd_thread_info): New. (mi_cmd_list_features): Include 'thread-info'.	2008-03-15 13:53:25 +00:00
Vladimir Prus	93815fbfa5	Inform about new thread in a single place. ... * thread.c (add_thread_silent): Renamed from add_thread. (print_thread_events): New variable definition. (show_print_thread_events): New function. (_initialize_thread): Add "set print thread-events" and "show print thread-events" commands. (add_thread): Announce new thread. * gdbthread.h (add_thread_silent): Declare. (print_thread_events): New variable declaration. * inf-ttrace.c (inf_ttrace_wait): Don't inform about new thread, as add_thread is always called too, and will take care of that. * infrun.c (handle_inferior_event): Likewise. * procfs.c (procfs_wait): Likewise. * remote.c (remote_currthread): Likewise. * sol-thread.c (sol_thread_wait): Likewise. * win32-nat.c (get_win32_debug_event): Likewise. * linux-thread-db.c (attach_thread): Likewise. Remove the verbose parameter. (check_event): Make detach_thread be verbose only if print_thread_events is set. * linux-nat.c (lin_lwp_attach_lwp): Don't inform about new thread. This is called only from linux-thread-db.c:attach_thread, which will take care. Remove the verbose parameter. * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.	2008-01-23 11:26:29 +00:00
Daniel Jacobowitz	9b254dd1ce	Updated copyright notices for most files.	2008-01-01 22:53:26 +00:00
Vladimir Prus	ca67fcb81a	Clarify infrun variable naming. ... * infrun.c (trap_expected): Rename to stepping_over_breakpoint. Document. (stepping_past_breakpoint): Remove. (stepping_past_breakpoint_ptdi): Renamed to deferred_step_ptid. (struct execution_control_state): Rename the another_trap field to stepping_over_breakpoint. (struct inferior_status): Rename the trap_expected field to stepping_over_breakpoint. (clear_proceed_status, proceed) (init_execution_control_state, context_switch) (handle_inferior_event, currently_stepping) (keep_going, save_inferior_status) (restore_inferior_status, prepare_to_proceed): Adjust. * gdbthread.h (struct thread_info): Rename the trap_expected field to stepping_over_breakpoint. * thread.c (load_infrun_state, save_infrun_state): Adjust.	2007-12-06 12:57:51 +00:00
Ulrich Weigand	6a6b96b9c2	* infrun.c (stepping_past_breakpoint): New global variable. ... (stepping_past_breakpoint_ptid): Likewise. (prepare_to_proceed): Add STEP parameter. Do not check for Ctrl-C. Only switch threads if we need to single-step over a breakpoint hit in the previously selected thread. If stepping, remember previous thread to switch back to in STEPPING_PAST_BREAKPOINT[_PTID]. Call switch_to_thread instead of copying its contents. (proceed): Pass STEP to prepare_to_proceed. Always set ONEPROC if prepare_to_proceed returns true. (init_wait_for_inferior): Reset STEPPING_PAST_BREAKPOINT. (context_switch): Call switch_to_thread. (handle_inferior_event): Switch back to previous thread if requested in STEPPING_PAST_BREAKPOINT[_PTID] by prepare_to_proceed. * gdbthread.h (switch_to_thread): Add prototype. * thread.c (switch_to_thread): Make global.	2007-09-10 18:49:26 +00:00
Joel Brobecker	a9762ec78a	Switch the license of all .c files to GPLv3. ... Switch the license of all .h files to GPLv3. Switch the license of all .cc files to GPLv3.	2007-08-23 18:08:50 +00:00
Daniel Jacobowitz	6aba47ca06	Copyright updates for 2007.	2007-01-09 17:59:20 +00:00